Install MATLAB after LabVIEW and SIT was installed

I have installed LabVIEW 8.2 and simulation interface toolkit in my computer.
The problem is I have Matlab 6.1 in my computer and it is not support by SIT so I updated it to the Matlab 2006b.
In such case I installed the Matlab after I installed the LabVIEW and the SIT. In this way I can find the NI sink or any other NI functions in MATLAB.
Is there any way to import the SIT to MATLAB besides reinstall SIT?
If reinstall SIT is necessry, should I just reinstall SIT or should I also reinstall any others? (I have LabVIEW RT, FPGA, Vision module in this computer)
Thanks,
-Alex

Alex,
You are missing all the files that need to be in Matlab. So, you just need to uninstall SIT and reinstall again. This should fix the location of the files and you can have SIT working again.
If you run into problems, let me know...
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Similar Messages

How to install cinnamon after arch linux core was installed?

Hi,
Does anyone know how to install cinnamon desktop environment after arch linux core was installed? It can access internet but no desktop environment now. So how to install and configure cinnamon on arch linux via command?
Many thanks!

after arch linux core was installed
So you finished installing the basesystem or also bootloader, graphics and so on? (https://wiki.archlinux.org/index.php/Beginners'_Guide)
If you finished installing with the Beginners Guide you need to install the cinnamon package (pacman -S cinnamon). After you installed cinnamon you need a display manager - e.g. lxdm (You can use another one, here's an overview: https://wiki.archlinux.org/index.php/Display_Manager). If you want to use lxdm with cinnamon you have to install the lxdm package (pacman -S lxdm) and enable it afterwards (systemctl enable lxdm.service). If you've done with this just restart, you should see the graphical display manager you installed. If there's a dropdownmenu or something like that (e.g. when you use gdm instead of lxdm) choose cinnamon as display environment and login.
More informations can be found in the wiki:
Display Manager: https://wiki.archlinux.org/index.php/LXDM
Display Environment: https://wiki.archlinux.org/index.php/Cinnamon

How to install VISA after Labview and NI-DAQ are already installed

I have Labview 5.1.1 and NI-DAQ 6.6 installed and running properly. I now find that I need to install VISA. Must I uninstall everything (hardware, NI-DAQ, and Labview) and then run the Labview installation again to install VISA? Or can I just go ahead and run the Labview setup again in order to install VISA?

No, you do not need to uninstall any of your hardware or software to install VISA. There are two ways that you can install VISA.
1. You can modify your installation of LabVIEW by going into Add or Remove Programs in the Control Panel, clicking on LabVIEW and selecting Modify (or Change, depending on your operating system). If you have your LabVIEW CD in the CD drive, you can simply enable VISA support in the Installer Tree. This will install VISA on your computer without modifying the installation of any of your other programs.
2. You can also download NI-VISA from our website and install it. You will probably need a reasonably fast internet connection, but this may be the easier way to install it. The URL for the VISA download page is linked below. Ve
rsion 3.0.1 is the newest and works with most Windows operating systems.
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument
Regards,
Mike N.
Applications Engineer
National Instruments

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Nope. It just opened the installer and stayed in the same loop.
It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
Eveything was working fine until the mountain lion failed install.

My Itunes keeps freezing up after the resent update was installed.

My Itunes keeps freezing up right after the resent update was installed. What can I do to fix this issue. Please help.
I Unistalled and reinstalled Itunes, But that didn't work.

      Reset PRAM. http://support.apple.com/kb/PH18761
      Reset SMC.     http://support.apple.com/kb/HT3964
     Choose the appropriate method.
       Start up in Safe Mode. http://support.apple.com/kb/PH18760
       Repair Disk. http://support.apple.com/kb/PH5836

How to swich to english version? I am from Czech republic and automatikly was instaled czech version,but I need english version.

How to swich to english version? I am from Czech republic and automatikly was instaled czech version,but I need english version.

Here's a simple guide using the CC Desktop panel:
After the install is finished, it should show up in the below Photoshop Preferences menu. Select and restart Photoshop.

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I have downloaded and installed Adobe Flash Player, but it was installed to a "disk image". I don't know what this is and I cannot see anything that requires Flash Player. What am I doing wrong?

I have downloaded and installed Adobe Flash Player, but it was installed to a "disk image". I don't know what that is, but I cannot view anything that requires flash player. What am I doing wrong?

Thanks for your help, but that didn't do any good either. I have been double clicking from the download files, double clicking on the "install adobe flash player", closing the anti virus, closing Safari, watching the install progress and clicking finish. It indicates that "flash player" is installed, but every time I try to view something requiring flash player, it tells me I must download it. It shows up in the "system preference" and from there I can make some changes, but it still won't let me view anything requiring "flash player". It does not show up in my apps like Adobe Reader does. It shows up in the "downloaded files" section of "Finder". I'm getting really perplexed over my inability to get this right.

I purchased Lightroom 5 a few months ago and it was installed my iMac desktop. I now want to also install it on my mac laptop. How do I do that?

I purchased Lightroom 5 a few month ago and it was installed on my iMac desk top. I now want to install it on my macbook pro. How do i do this?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

After effects and premiere not installing

Hi, I purchased CS 5.5 and when I tried to install on my imac intel core duo OXS 10.6.8 after effects and premiere didnt install. They are not even showing in options in the installer. Everything else is fine except those two. Can i install them on this machine? Thanks
Model Name:    iMac
Model Identifier:    iMac4,1
Processor Name:    Intel Core Duo
Processor Speed:    1.83 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    2 MB
Memory:    2 GB
Bus Speed:    667 MHz
Boot ROM Version:    IM41.0055.B08
SMC Version (system):    1.1f5
Chipset Model:    ATY,RadeonX1600

As Mylenium says, this is a 32-bit processor.
After Effects CS5 and later is a 64-bit application. Master Collection CS5.5 and Production Premium CS5.5 come with 32-bit After Effects CS4. See this page.

I have installed Illustrator thru Cloud and then un-install the Illustrator. How can I re-install it

I have installed Illustrator thru Cloud and then un-install the Illustrator. How can I re-install I?

Quit the Creative Cloud application and relaunch it again. When the CC app gets launched it scans through the installed applications and updates it's "Apps" tab accordingly. After this you can install Illustrator from the APPS tab.
~Raghuveer

Instalation DVD is damaged and can't install OS X. What should I do?

Instalation DVD is damaged and can't install OS X. What should I do?

If you have to reinstall, you'll need to get a new copy of the installation DVD. If this is the disk that came with your Mac, call Apple tech support and they should be able to sell you a replacement disk set for a reasonable charge.
Regards.

Lost my registrations and my sites in iweb after new logic board was instal

I recently brought my MacBook Pro in to the Apple to store to check out why it wasn't starting up properly. I would hear a chime but the display wouldn't even light up. We tried an SMC and a PRAM reset. We tried plugging in an external monitor and reseating the ram. They had determined after 30 minutes at the genius bar that I must have a faulty logic board. Four days later I picked up my repaired notebook and everything was fine.
I then began noticing some very peculiar things. Saved settings seemed to be missing. My browsers cache was not as I had left it. My BootCamp Volume had gone back to a previous state prior to some applications being installed and even had a user account missing. So far, this didn't seem to be enough to make an issue of until tonight.
I went to open an application and it prompted me for my registration number. I've had this app installed for about 6 months now and never had an issue. Then I go to open iWeb and discover that all my sites and pages are missing. I haven't looked for them because they really aren't that important to me... but what if they were?!
Many settings and preferences are perfectly fine but I find it extremely hard to understand how coincidentally all of these other items crapped out immediately after a new logic board was installed. Is there any explanation for this at all? Is there any further testing or further info I can provide to get to the bottom of this?

Look in "About This Mac" in the  menu for the serial number. They probably didn't copy it to the new logic board. They can download software to do this from a website restricted to Apple service departments.

Yellow bars and Apple logos appearing on windows after OS X Lion was installed! Help?

As noted in the title, this started to occur after I installed Lion. Anyone else have this problem, or know a fix for it? If it's relevant, I'm using a 2 GHz Intel Core 2 Duo Macbook, with 4 GB of DDR2 RAM. I've tried software updates, restarting my computer, and removing 3rd party desktop modifications such as CandyBar and other menu bar tweaks.
Here is a link to my desktop.
twitpic.com/5tljsz

Start with a simple explanation of what you did, and what was left after you did it.

500k profile after disruption and new line install...

Hello,
Status:
I have an open fault logged with BT;
Phone line ok but broadband speed low, profile appears stuck at 500k.
History: sporadic BBand connection and noisy phone line followed by outright failure of both.
Engineers visited and confirmed line between street and master socket probably corroded - they put it on leg+leg to get it working while we waited for a new physical line to be installed.
Pavement was dug up, new armoured cable run from street to house, and a proper master socket fitted (NT5 ? but no inbuilt ADSL filter).
In effort to ensure low noise, ALL other sockets in the property disconnected.
Digital phone (3 handsets off a single powered base) are run off the master socket using a filter.
Router is business hub - 2700hgv; f/w 6.1.1.48.1-enh.tm , h/w 2701-100589-005 .
Hub is connected to same master socket as phone (as it's the only socket now connected to the new line).
New line was installed approx 18 days ago.
Speed tests (speedtest.net) repeatedly show download of 480kbps, upload around 620kbps.
No change since new line was installed and all but the master socket decomissioned.
I use wireless to the router but also repeated tests with a Cat6 copper RJ45 cable and got same results.
Have taken all wireless devices offline and removed electrical items near phone line power supply and cable path to reduce potential noise and repeated tests.
I left the router on for two weeks and no increase in broadband speed.
I rebooted it twice this weekend to see whether it picked up a different profile - but no change.
BT speedtester repeatedly indicates a profile of 500k (full results further down).
Last year I had speeds about 512k on a DrayTek router before switching to the 2700HGV. The change to the BT hub upped the download speed to around 1Mbps, which made a huge difference.
I know I am "a long way from the exchange" but I've had 1Mbps last year and now have a new line into my property, so not much left that I can do to improve the situation.
I'd like to know what can be done to get me at least 1Mb download again.
I have an engineer visit due tomorrow but I believe that will be purely to finish putting paving slabs back over the armoured cable that's been installed (i.e. OpenReach dig team rather than line engineers).
After those slabs are done, I expect the fault will be closed but I'll still have a 500k profile and will need to raise a new fault all over again - that fault was opened 5 weeks ago.
Results of speedtester.bt.com run just now (1pm Sun 13th March 2011):
Download speed achieved during the test was - 363 Kbps
For your connection, the acceptable range of speeds is 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :576 Kbps(DOWN-STREAM), 777 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 2.46:14.86:82.95 (SBE:NBEBE)
Upload speed achieved during the test was - 638 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 777 Kbps
Router web interface shows:
Rate:
576 kbs
778 kbs
Max Rate:
2621 kbs
784 kbs
Noise Margin:
16.7 dB
7.0 dB
Attenuation:
62.8 dB
35.8 dB
Output Power:
16.1 dBm
12.4 dBm
Protocol:
G.DMT2 Annex A
Channel:
Interleaved
DSLAM Vendor Information
Country: {46336} Vendor: {IFTN} Specific: {48753 }
ATM PVC:
0/38
Rate Cap:
2621 kbs
Attenuation @ 300kHz:
62.8 dB
Uncanceled Echo:
-14.8 dB
Ok
VCXO Frequency Offset:
-2.0 ppm
Ok
Final Receive Gain:
34.5 dB
Ok
Impulse Noise Comp. Tones:
0
Ok
Excessive Impulse Noise:
0
Ok
I hope that's the information that someone might need to help me at least get 1Mbps back on my line.
Regards,
BK

Hi Bk1
Welcome to the Community.
Send me an email to the link in the about me section of my profile.
I can have this looked into for you further.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Install MATLAB after LabVIEW and SIT was installed

Similar Messages

Maybe you are looking for