Install mavericks in a clean ssd

Hi, I think I just messed, and need help.
I upgraded my HD for a SSD drive. I thought I could do a fresh install of Mavericks from the internet on a completely blank drive.
It seems I can't. Can I?
If necessary, I have a time machine backup of the old HD, but I really would like a fresh start, getting rid of all junk we accumulate over time.
Thank you all.

Here is the link to follow
http://arstechnica.com/apple/2013/10/how-to-make-your-own-bootable-os-x-10-9-mav ericks-usb-install-drive/
You'll need a copy of the 5.4GB "Install OS X Mavericks" from the app store and a 8GB usb stick.

Similar Messages

How do I install Mavericks onto a new SSD HD in my late 2008 MacBook Pro?

How do I install Mavericks onto a new SSD HD in my late 2008 Macbook Pro, and then I hopefully can reinstall my data from my Time Machine backup?
I presume the SSD will need some type of formatting, before I can install Mavericks from the internet? Then can I use my Time Machine backup to reinstall all my other software and settings?

In order to load Mavericks the SSD will have to be formatted Mac OS Extended with GUID partition mapping

I want to install Mavericks on my new SSD before putting it in my MacBook Pro, is this possible?

I want to install Mavericks on my new SSD before putting it in my MacBook Pro, is this possible? If so how can I do it. My MBP can run and is running Macericks now on my HDD. I do not want to transfer my file, I would prefer a fresh install on my new SDD.
Thanks in advance for all your help.

Connect the SSD with an external enclosure. Boot the system holding down the Command and R keys to get to the Recovery partition. Partition and format the drive with Disk Utility, then install. You're done.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1394063933&sr=8-3&keywords=2.5+enclosure

How to install Mavericks onto a new SSD

Hi,
I have just purchased a new Samsung 840 EVO 250GB SSD, I want to replace my existing HDD with the new SSD and install Mavericks straight onto it. I do not need to keep any files from my existing HDD, I just want to clean install Mavericks, how do I go about this?

Has_Ozi wrote:
Do I need to erase the SSD first?
Yes, you will need to initialize the SSD.
First, back up your system before you install the SSD.
Download and run the OS X Recovery Disk Assistant. You will need a 4GB USB thumb drive. This will ceate the Recovery HD currently on your Mac to the thumb drive. I'll assume you currently have OS X Mavericks installed.
Install your SSD.
Boot from the USB thumb drive by restarting and holding the Options/Alt key to select the USB drive.
Open Disk Utility and format your SSD as Mac OS Extended-Journaled with the GUID partition table.
Quit Disk Utility and Reinstall OS X (you should see the X logo to the left of this option). Make sure you have an Internet connect as this will download OS X Mavericks before starting the installer.

I can't install Mavericks on the new SSD in my mid-2010 iMac

I recently had my old 500 GB hard drive swapped out for a new 480 GB SSD on my mid-2010 iMac. I made a flash drive into an OSX Mavericks installer per instructions from online tutorials. With the flash drive inserted, I formatted the new SSD in disk utility and then selected it to install Mavericks. However, I can't complete the installation, which is supposed to take 26 minutes, because the screen goes black midway through. I tried this twice and the second time moved the mouse periodically to make sure that the computer wasn't going to sleep. Same thing happened. Installer says that the installation can be recovered, but it will not complete installation. Any advice much appreciated!

Wondering if this can be done
Yes.
http://www.ifixit.com/Device/iMac_Intel
Also I have 4 ram slots with 2gb in two of them can I install two sticks of 4gb in the empty ones without impacting performance
Yes. Recommended in pairs. So 2x2GB + 2x4GB SO DIMMS for a total of 12 would be fine.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27

Since installing maverick, my c cleaner program says my operating system is not supported

Installed Maverick. My cleasning program says my operating system is not supported.

Hello,
The CCleaner Program form Priform does not support OSX Mavericks.
I personally feel that you do not need a 3RD party cleaning software on your apple computer, due to the fact that the computer performs these tasks automatically.
here are some links to other Apple Discussions of the same topic:
https://discussions.apple.com/message/22934635#22934635
Thanks,
Matt

Installing Mavericks on second internal Hard Drive (SSD)

I've recently installed a second hard drive in my 15" 2011 MacBook Pro using the Optibay drive replacement. I've put a 120 GB solid state drive in place of the CD drive. I have been attempting to install OSX Mavericks on it, but have been unsuccessful. The drive currently has no data on it, and has been reformatted several times to re-attempt the installation. Each time I have tried to install mavericks on the extra SSD in the optibay drive, I have received this error:
"Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk because a recovery system can't be created. Visit www.apple.com/support/no-recovery to learn more" and it only gives me the option to restart the computer.
After I visited the site I tried the suggested steps in both of the articles linked to on the page, but still no success. I am not running RAID on the drive. It is brand new and has been in the laptop for about a month. It hasn't been used at all. I've also tried creating a bootable flash drive, but startup disk will not recognize the flash drive or the other drive in the computer to start up from.
I was thinking of possibly taking the SATA drive out (where my OS Mavericks currently resides) and replacing it with the SSD to force it to start up there or the flash drive. Would that be the logical next step here?
This is what I am trying to do: I want to have all of my OS and software on the solid state so it will be quicker, but I will store most of my data on the SATA drive that came with the computer.
Any help would be greatly appreciated.
Thanks in advance,
Winston

I am also facing similar issue with 2011 late july 13 mac book pro with 256gb intel 520 ssd (runs the OSX)<pertioned 119 for mac, 119 for boot camp running oem win8.1) at main bay, 750 gb WD hdd on optical bay (where Home folder is moved). Basicall SSF mainly for apps and os. Where as home folder remain in WD HDD.
With snow leopard it's absolutely a performer. boot up less than 15 second, sleep to wake instant. WIN 8.1 superb too..no fass at all.
Intel 6 Series Chipset:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk0s1
Content:          EFI
MacPro:
Capacity:          119.2 GB (119,197,646,848 bytes)
Available:          75.01 GB (75,012,960,256 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Content:          Apple_HFS
Volume UUID:
Recovery HD:
Capacity:          650 MB (650,002,432 bytes)
BSD Name:          disk0s3
Content:          Apple_Boot
Volume UUID:
BOOTCAMP:
Capacity:          120 GB (119,999,037,440 bytes)
Available:          84.87 GB (84,866,392,064 bytes)
Writable:          No
File System:          NTFS
BSD Name:          disk0s4
Mount Point:          /Volumes/BOOTCAMP
Content:          Microsoft Basic Data
Volume UUID:
Intel 6 Series Chipset:
Vendor:          Intel
Product:          6 Series Chipset
Link Speed:          6 Gigabit
Negotiated Link Speed:          3 Gigabit
Physical Interconnect:          SATA
Description:          AHCI Version 1.30 Supported
WDC WD7500BPKT-00PK4T0:
Capacity:          750.16 GB (750,156,374,016 bytes)
Model:          WDC WD7500BPKT-00PK4T0
Revision:          01.01A01
Serial Number:
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk1s1:
Capacity:          209.7 MB (209,715,200 bytes)
BSD Name:          disk1s1
Content:          EFI
Data:
Capacity:          749.81 GB (749,812,400,128 bytes)
Available:          329.73 GB (329,727,766,528 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk1s2
Mount Point:          /Volumes/Data
Content:          Apple_HFS
Volume UUID:
Now while upgrading to Marverick, its says my SSD is locked even though its writable, and only availble drive for installation is WD HDD! Which i don't want at all, then no point of having SSD on board!!
I did tried to install Marverick as packageinstaller, but its still find my SSD is locked.
Any flocks facing the same senario? any though will be welcome.
Thanks

Installing Mavericks to external HDD, can I have more than one Partition?

Hi,
I am about to install Mavericks on an external SSD drive, which I shall be using instead of the internal HDD. My question is do I have to format the SSD with one partition, or can I use 2 or 3 ?
Thanks

Just to update I bought the WD My Book Studio 2tb as I like WD drives and it comes in a matching aluminum case.
I am using it as my boot drive and also my main storage. I put a copy on it of all the apps and software I had on the internal drive.
Boot up time with internal HDD @ 32 seconds
Boot up time WD external HDD @ 43 seconds (USB 3.0)
Not too shabby! Look forward to getting an external SSD drive connected via thunderbolt (might then match my new p.c. with a boot up time of 9 seconds)

Clean Install Mavericks... Time Machine backups...

Hey,
I've been having some minor issues with the 'spinning beach ball'/system freezing up, or not even being able to boot up and having to re-install Mavericks...
So I brought it in to a Apple store, and they suggested doing a clean install... I've held off until now, I'm getting a new SSD and will be doing this clean install in a week or so. Is it possible to do a clean install in Mavericks on a new SSD and still have my Time Machine backups available?
I know the one time I changed the name of the hard drive and Time Machine didn't like that... I'm assuming I'll have to name the new drive the same as the old drive was?
I'd rather not restore as they said at the Apple store that could re-introduce the problem, so I'd like to do a clean install, then restore from backup some files/apps and my email.
Any help or suggestions would be much appreciated!

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

REALLY Clean Install Mavericks

I have a 13" Late 2012 MBP which I upgraded with a Crucial M500 SSD on which I clean installed Mavericks the day after its launch. The SSD was brand new then, so this was the first thing it was used for, straight out of the box.
Now, I have a "talent" of messing with system files and I may have done something wrong here and there, because OS X is not as smooth as it was supposed to be (for example, compared with 10.8.5 which I previously had on it). App crashes here and there, Safari being very slow or "forgetting" that I clicked on a link etc.
I have verified and repaired the startup disk (from Recovery Mode), same with the permissions, I scanned and repaired it with OnyX but still it doesn't perform as expected.
So I decided to reinstall Mavericks, from scratch. As I would really hate to "inherit" some of these bugs on the new install, I REALLY want to to start fresh. So I need a clean install, free of any doubts, just like if it were brand new again.
Are there any tips other than the normal clean install? By normal clean install I understand making a bootable USB with 10.9, booting from it, erasing the startup drive with Disk Utility and then installing from the USB. (I prefer the USB method, since it would take a while to download 10.9 from Apple, i.e. using Internet Recovery).
And by the way, do you recommend a specific method of doing a bootable 10.9 USB? I tend to use the way via Terminal, but I also heard of DiskMakerX as an alternative.
And last but not least...am I paranoid? Should I worry less and simply do a straight clean install, as this is *really* the *really* good way to go?

⌘R on Boot, Utilities->Disk Utility, Erase Disk, exit Disk Utility, Reistall OS X Mavericks.
(I prefer the USB method, since it would take a while to download 10.9 from Apple, i.e. using Internet Recovery).
edit: Or that...
And by the way, do you recommend a specific method of doing a bootable 10.9 USB? I tend to use the way via Terminal, but I also heard of DiskMakerX as an alternative.
See: http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html

Can't Install mavericks on SSD

I have a 2012 Macbook Pro 13".
I had a hard disk failure almost 2 weeks ago. [I accidently kept the mac running by using the Caffeine app while keeping macbook in my backpack and roaming around an exhibition]. I saw blinking folder icon and couldn't detect my hard disk at all.
Then I reset SMC and tried to detect it but it didn't work.
My macbook passed the Hardware Test.
So I ordered and installed a new Samsung 840 Evo SSD on my macbook and tried installing mavericks but the Istalled Failed with the following error log:
localhost OSInstaller[384]: update_dyld_shared_cache exited with 1
PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=121 "An error occurred while updating system extension information." UserInfo=0x7fab0300ebb0 {NSUnderlyingError=0x7fab034857f0 "The operation couldn't be completed. (kextcache error 71.)", NSLocalizedDescription=An error occurred while updating system information., arguments=
Install Failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
I used the same mavericks installer USB and installed my SSD on a friend's macbook pro with the same year, make and specs and it installed fine. However, when I reattched that SSD with installed mavericks and booted my macbook it gave me a blinking globe and question mark icon.
Apart from SSD, I'm using all the original RAM and other parts.
Kindly suggest solution.

It turned out to be bad internal hard drive cable.
I'm seriously disturbed by the lack of support from one of the Genius Bar and had to travel a long distance to get true service from another Genius Bar.
I want to file a formal complaint against that particular Genius Bar. Can someone kindly provide me with the link to file a complaint?

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

How do i install iPhoto on a clean install of mavericks

My macbook was getting extremely slow so i did a clean install of mavericks. Now i don't have iPhoto. I have the original install dvd, but when I try the applications install dvd it just ejects it after a few seconds. I can't find anyplace on the app store where i can download a version for mavericks.

a little clarification. The original install dvd is 10.5.5. I installed mavericks over the net.

Can't clean install Yosemite to 3rd party SSD in 2008 MBP

Hi all.
I'm a longtime lurker, first time poster. I seem to have really stymied myself with trying to upgrade my ol' reliable MBP.
My machine:
Late 2008 15" MacBook Pro
2.4Ghz Core 2 Duo
4GB RAM (3rd party Crucial, 2 matching 2GB sticks - it originally shipped with 2 1GB sticks, I upgraded it around 2 years ago)
120GB SSD (3rd party OCZ Agility III, it originally shipped with a 500GB Hitachi HDD - I've just installed this and am trying to use it)
No optical drive (it broke years ago)
Here is what I've done so far:
Removed the 500GB HDD and inserted the 120GB SSD
Created a bootable USB stick with the Yosemite installer on it
Booted from said USB stick and used Disk Utility to format the SSD with a GUID partition table, with 1 HFS+ (Journaled) formatted partition
Begun the Yosemite installer
The progress bar crawled for about 3 hours until it got about halfway, then it failed out with an error. Unfortunately I stupidly don't have a copy of the error logs
Booted from the USB stick again
Now the SSD does not show up at all in Disk Utility and I am not given the option of it when attempting to install Yosemite - so I can't reformat the drive or attempt another install
I have tried to run the Apple Hardware Test (to see if there are any problems with the RAM that might have triggered the error installing Yosemite), but unfortunately this does not seem possible on my machine. Since it is a late 2008 model with no optical drive, from the research I've done there seems to be no way I can run it. It can't do an Internet Hardware Test, and the 'trick' of holding F2 during bootup won't work because apparently you need to have the original shipping OS installed. From memory this machine shipped with Leopard - the OS on my old 500GB HDD is Snow Leopard however.
Does anyone have any ideas for what I can do next here? My goal is simply to do a clean install of Yosemite onto my SSD. I'm at a bit of a loss, especially since the SSD isn't even showing up in Disk Utility now.
An additional detail: There isn't anything in the slot where the optical drive should be. 2 years ago I opened my machine and removed it, replacing it with a 2.5" 'optibay' drive caddy. Unfortunately it was a pretty cheap caddy and it never functioned properly, so I removed it before beginning the above process. There is just an empty space now inside the machine, since I threw away my old broken optical drive years ago. I don't know if this may also be causing problems.
Many thanks for any and all assistance!

Thanks for responding Leopardus.
I tried holding Cmd+R at startup last night, but unfortunately all I got is a flashing folder with a question mark on it, presumably indicating that it can't find any files.
Internet Recovery is unfortunately not possible on my computer, I believe this feature was only included with Macs that shipped with Lion or later versions of OS X (mine shipped with Leopard).
The problem in the thread that you linked seems a bit different to mine - I think the core issue for me is that the SSD is now not recognised at all by Disk Utility, meaning I cannot even format it to try installing again.
Does anyone have any suggestions as to how I can access this 'invisible' SSD? I am considering buying a USB to SATA cable and connecting it to a friend's Mac.

Clean Install Mountain Lion on upgrade-SSD of a 2012 MBP

Dear strangers,
I searched the internet for a while, but didn't seem to find an answer. I would like to buy the current MBP (non-retina) and upgrade the HDD with an SSD (since Apple prices are rather ridiculous). So I want do perform a clean install on this SSD, what is the best option? I understood that there are no installation disks anymore, but how do you perform a clean install on an 3rd party SSD when you bought a Mac(Book Pro) with Mountain Lion already installed on it? I know I could make a bootable USB drive, but then you need to have a disk image of the OS.
Anyone? I need help quick!
Thanks in advance,
Arno Claes
Belgium

This is the message that would happen with Lion, see this: http://support.apple.com/kb/HT4649
Basically when you setup a Raid 0/1, the Lion and Mt. Lion installer won't/can't create a recovery partition.
When you boot from a recovery partition you have access to certain tools, e.g. Disk Utility to restore a Time Machine back up, redownload the OS, etc.
The recovery partition provides a certain bit of convenience but isn't absolutely necessary to run the OS. When you see the message, doesn't it let you go ahead with the install, accepting that no recovery partition will be created?
If you need some of the recovery partition tools, you have a bootable USB stick as well as a backup of the Mt. Lion installer, no?

Install mavericks in a clean ssd

Similar Messages

Maybe you are looking for