Install Mavericks on a new HDD

Hello there, I replaced the HDD on my Macbook Pro 2011. I ran Mavericks on the old drive. After I've installed the new HDD I ran online recovery which gave me access to disk utility and other recovery options. I thought I'd get "reinstall mavericks', but instead I got " reinstall Lion". I thought I would install lion then upgrade later just to get the computer working. I tried that and it says " our machine could not be verified contact apple...". I purchased Lion 3 years ago and by some mistake it removed from my AppStore purchases. I don't know what to do now and how to directly download Mavericks onto the new totaly empty HDD!!!

Ah,
Try this.
The Lion dmg file is called 'Install Mac OS X Lion.app'.
Right-click (or Control+click) the installer, and choose Show Package Contents from the resulting contextual menu.
In the folder that appears, open Contents, then open Shared Support; you’ll see a disk-image file called InstallESD.dmg.
Launch Disk Utility (in /Applications/Utilities) and Drag the InstallESD.dmg disk image into Disk Utility’s left-hand sidebar.
To create a bootable hard drive or flash drive
In Disk Utility, select InstallESD.dmg in the sidebar, and then click the Open button in the toolbar. This mounts the disk image’s volume in the Finder. The mounted volume is called Mac OS X Install ESD.
Click Mac OS X Install ESD in Disk Utility’s sidebar, then click the Restore button in the main part of the window.
Drag the Mac OS X Install ESD icon into the Source field on the right (if it isn’t already there).
Connect to your Mac the hard drive or flash drive you want to use for your bootable Lion installer. This drive must be at least 5GB in size (an 8GB flash drive works well), and it must be formatted with a GUID Partition Table. (Use Disk Utility to Format the Drive)
In Disk Utility, find this destination drive in the sidebar and then drag it into the Destination field on the right; if the destination drive has multiple partitions, just drag the partition you want to use as your bootable installer volume. Warning: The next step will erase the destination drive or partition, so make sure it doesn’t contain any valuable data.
Click Restore and, if prompted, enter an admin-level username and password. The restore procedure will take anywhere from five to 15 minutes, depending on your Mac and the speed of your drive.
Note: In versions of the Lion installer prior to 10.7.4, you didn’t need to first mount the InstallESD.dmg image—you could simply drag the image itself into the Source field. However, with the 10.7.4 installer, you must use the mounted Mac OS X Install ESD volume or you will get an error at the end of the restore procedure and the newly created bootable drive may not function properly.

Similar Messages

I want to install Mavericks on my new SSD before putting it in my MacBook Pro, is this possible?

I want to install Mavericks on my new SSD before putting it in my MacBook Pro, is this possible? If so how can I do it. My MBP can run and is running Macericks now on my HDD. I do not want to transfer my file, I would prefer a fresh install on my new SDD.
Thanks in advance for all your help.

Connect the SSD with an external enclosure. Boot the system holding down the Command and R keys to get to the Recovery partition. Partition and format the drive with Disk Utility, then install. You're done.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1394063933&sr=8-3&keywords=2.5+enclosure

How do I install Mavericks onto a new SSD HD in my late 2008 MacBook Pro?

How do I install Mavericks onto a new SSD HD in my late 2008 Macbook Pro, and then I hopefully can reinstall my data from my Time Machine backup?
I presume the SSD will need some type of formatting, before I can install Mavericks from the internet? Then can I use my Time Machine backup to reinstall all my other software and settings?

In order to load Mavericks the SSD will have to be formatted Mac OS Extended with GUID partition mapping

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Installing OSX on brand new HDD on Macbook Pro 13" Mid 2009

I have installed a brand new solid state hard drive in my macbook pro 13" mid 2009.
I replaced the old hard drive because it was failing.
Now that I have the new hard drive installed I am struggling to get OS X installed onto the new hard drive. I have ruled out using a USB enclosure on the old hard drive to do the transfer because it was failing.
I do have the original OSX snow leopard start up disk. I have tried using this to install OSX onto the new HDD but it would not work.
I think it might be because the new HDD is unformatted?
I have also been into disk utility to try to resolve this but this does not work.
I have tried partitioning the new HDD but I get an error message "Partition failed .... POSIX reports: The operation cannot be completed. Cannot allocate memory".
I have also tried the restore function in Disk Utility to restore the disk using my time machine backup disk, but I get the error "Could not erase target - Operation not permitted"
I have also tried to restore the HDD from a time machine backup, but when I try to select a Destination it says the "disk does not have enough space to restore your system"
Any suggestions on how to solve this would be much appreciated

I assume that you have an original Leopard installation disk or a white retail Snow Leopard disk.
Start your MBP with one of these disks holding the C key down.
Commence the installation process until you get a display with the menu bar on top.
Click on UTILITIES.
From the drop down menu, click on Disk Utility.
Select Disk Utility>Erase.
Format the SSD to 'Mac OS Extended (Journaled)'.
Continue the OSX installation.
Ciao.

Installing OS on a new HDD for imac with no installed HDD

Hi all
I am looking to buy an iMac 27", but it doesnt come with a HDD
So I wanted to know if I buy a new HDD for it, can I install Mavericks onto it and fit it to the iMac? How would I go about doing this?
I dont have access to another mac but I do have access to a windows machine. Can I do it from there?
Any help appreciated
Thanks

Where are you buying an iMac 27-inch, Late 2009 model that has no internal hard disk drive?
Having to assume it was removed by an original owner, does the computer work? Was it tested by use of an externally enclosed HDD with a correct bootable system installed?
There are various repair and upgrade guides online, several topics among them and several are free to view or use. There likely is an iFixit guide that may cover that vintage of iMac 27-inch build year model.
Not sure which iMac 27-inch model guide applies to your computer,
some appear here http://www.ifixit.com/Device/iMac_Intel
While considering the hard disk drive, be sure that if there are any sensors or special cables required to be in place and attached to a new replacement, they are in place and working; some users of later models found when a hard disk drive was replaced, their fans ran at high and uncontrolled speeds due to lack of sensor input. The default situation was for the computer act as though the unit was overheated. And third party fan control software to set a fan at low slower speeds does not take into account faster speeds are needed to cool iMacs. Yours may not exhibit this issue, but I am not certain either way.
When you get it set up, with HDD and original Snow Leopard installed & updated to 10.6.8, be sure to check to see if there are any hardware or firmware updates. I see there was one listed for your model and it may already be installed...
•27-inch iMac EFI FW Update 1.0:
http://support.apple.com/kb/DL1031
Hopefully this helps...
Good luck & happy computing!

How to install Mavericks onto a new SSD

Hi,
I have just purchased a new Samsung 840 EVO 250GB SSD, I want to replace my existing HDD with the new SSD and install Mavericks straight onto it. I do not need to keep any files from my existing HDD, I just want to clean install Mavericks, how do I go about this?

Has_Ozi wrote:
Do I need to erase the SSD first?
Yes, you will need to initialize the SSD.
First, back up your system before you install the SSD.
Download and run the OS X Recovery Disk Assistant. You will need a 4GB USB thumb drive. This will ceate the Recovery HD currently on your Mac to the thumb drive. I'll assume you currently have OS X Mavericks installed.
Install your SSD.
Boot from the USB thumb drive by restarting and holding the Options/Alt key to select the USB drive.
Open Disk Utility and format your SSD as Mac OS Extended-Journaled with the GUID partition table.
Quit Disk Utility and Reinstall OS X (you should see the X logo to the left of this option). Make sure you have an Internet connect as this will download OS X Mavericks before starting the installer.

Portege R600 - How do I install XP on a new HDD?

I did the mechanical install of a new hard drive, and know it's correct.
Now, I want to install XP - not Vista. However, nothing I have tried will enable the BIOS to recognize that new drive. Toshiba XP "alternative media" disk should include the SATA drivers, but it doesn't work.
What did I miss?

The new HDD is SATA, similar to the original 160 but larger.
I don't know how to check whether it's visible in the BIOS -- ??
I installed the drive, then tried to use the Toshiba alternative OS disk - XP. It didn't see the HDD. So, I tried a new XP install disk, which also didn't see the HDD.
It seems to me that the Toshiba alternative OS disk - XP - should have the SATA drivers on it. No?

I can't install Mavericks on the new SSD in my mid-2010 iMac

I recently had my old 500 GB hard drive swapped out for a new 480 GB SSD on my mid-2010 iMac. I made a flash drive into an OSX Mavericks installer per instructions from online tutorials. With the flash drive inserted, I formatted the new SSD in disk utility and then selected it to install Mavericks. However, I can't complete the installation, which is supposed to take 26 minutes, because the screen goes black midway through. I tried this twice and the second time moved the mouse periodically to make sure that the computer wasn't going to sleep. Same thing happened. Installer says that the installation can be recovered, but it will not complete installation. Any advice much appreciated!

Wondering if this can be done
Yes.
http://www.ifixit.com/Device/iMac_Intel
Also I have 4 ram slots with 2gb in two of them can I install two sticks of 4gb in the empty ones without impacting performance
Yes. Recommended in pairs. So 2x2GB + 2x4GB SO DIMMS for a total of 12 would be fine.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27

How to install os x in new HDD

Hello.I am from India and have bought my macbook pro around 1 and a half year ago.Now my hard disk crashed and bought a new one.So how would i install os x on it without disk.As old HDD is not working and i have downloaded os x from mac app store..Please help
My old HDD is not working at all so how would i download mountain lion from another machine (with my appleid) and install it in my new HDD

At some point it will ask you to select a WiFi network name, if you have WiFi, and the password for it or you can Wire the Mac to your internet router with an Ethernet cable.
If you have no internet access at all you are, what they call, SOL. You'll need to get an internet connection to reinstall OS X.
virajdasondi wrote:
Thank you for quick reply..I will try this.And will this work on brand new Hard disk and without internet connection..

Installing Mavericks on a new hard drive...

Hi
My hard drive crashed, and I bought a new one today. They told me at best buy I need to download mavericks drivers onto a usb or something. I'm not really sure what they meant so I thought I would ask here. Where do I go to put Mavericks onto a usb to install it on a new hard drive?
Thanks

1. If it shipped with 10.7 or newer, you'll need to go through that OS by following the instructions above, and then install Mavericks in the normal way. If it shipped with 10.6.8 or earlier, reload that OS from DVD and then upgrade to Mavericks.
2. The computer's firmware contains instructions for connecting to the Internet.
(100250)

Need to install maverick on a new hard drive old drive died

Can I install Maverick from the internet on a new drive

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Cannot install 10.6 to new hdd

My hdd was on the way out so ordered a new Hitachi 1TB - it arrived this morning and installed easily. However, also ordered a new 10.6 Snow Leopard CD from apple store in hope to boot machine from it and make fresh install to new HDD. Booting machine, holding c and it buzzes and whirs for a bit and then ejects the CD. I then get a flashing folder icon with a '?' in it. I do not have my original 10.5.5 Leopard discs as they on way to me in shipping from old house. If its my CD drive that is playing up - is there another way to get my new CD of 10.6 onto my new blank hdd that is installed in my machine?? I have also tried to boot from a friends Tiger install disc - it does the same.

Hi Guys, these are great tips etc - thank you, but I think we're missing the main point, that being that I cannot boot my iMac from the SL installation CD - I get nothing holding down C or 'Option' etc - it just ejects it, so I think I may have a problem with the CDROM. My only other machine is my Macbook Pro, running Tiger.
Q: is it possible to boot my iMac with BLANK HDD from any other device USB/FW connected??? You see, the HDD has NO OS on it and the CDROM is not working either. Could I boot the iMac using the SL installation CD in a USB connected CDROM drive???
Last resort I guess is to take it all to bits again, get SL on the new HDD by some other method and put it back in again.
Any thoughts??

Installing Mountain Lion on new HDD

Help! I just got a new HDD for my macbook pro 15 in mid 2009. Got a WD 750 GB 5400rpm. I'm trying to install mountain lion but it won't let me. I formated the new HDD and partitioned correctly. Can someone give me a solution to install Mountain Lion on my new HDD? I've tried LionDiskMaker, bootable usb drive, and nothings seems to work. I also tried to install Snow Leopard Intall DVD and the DVD that came with my laptop when they get spit out! Help! Thanks!
-Here's what I've done so far:
-Got the new HDD.
-Got a USB enclosure to connect the HDD to laptop
-Downloaded Mountain Lion from App Store in Lion
-Did no installed yet
-Downloaded LionDiskMaker
-Created a Mountain Lion bootable usb
-Rebooted and holding OPT key and selected the Mountain Lion Bootable USB
-Disk Utilities>Formated the new HDD, 1 partition, GUID, Journaled, named it Macintosh HD.
-Closed Disk Utilities, Installed Mountain Lion
-Won't install after 10 hrs!
-Rebooted from Mountain Lion bootable USB
-Repeated the process.
-Try to install Mountain Lion
-Won't Install.
Help!

I'm not sure who recommended the Scorpio Blue to you....
Read HERE and HERE from Western Digital's own forum regarding the Blue Editions on Macbooks.
In any event, I had my own issues with the Blue Edition in my late 08 Macbook.....Took hours of trying to make it work and no go. Went with Seagate instead.....
Try to see if you can get it up and running but don't waste hours if you can't get it to go......If you can replace it with the Scorpio Black or something else - then go for it......
Trying to save you a lot of fraustration.....Try it for a while and if it's still a no go - replace the drive.
Good luck - let us know about your progress...

Does anyone else have horrible feedback since installing Mavericks and the new IOS for your devices?

I am so frustrated since installing all of these new updates...they took a great app like FaceTime and totally ruined it with feedback. I even went to the apple store and they reset my phone after finding that apps were crashing, and it didn't make a speck of difference. So annoyed to have to go back to skype on all three apple products. But its the only way to use a video chat now that I can find. Anyone else have this issue

Mandy51 wrote:
... Anyone else have this issue
Nope

Install Mavericks on a new HDD

Similar Messages

Maybe you are looking for