Install new copy of lion
What happens when I "Install a new copy of Lion" on my iMac? Does it erase the drive, or just reinstall the OS on the Mac?
Well, I suppose it depends on if you already had Lion and the recovery parition and what you are trying to do. Or, if you mean you did not have Lion, and, now want Lion.
If you merely are trying to reinstall it and keep all the stuff on the drive, as opposed to fixing some specific problem, then, just run the installer. It won't delete any of your data. How to run it depends on if you aghve a recovery partition or not, if you have a copy of Lion you downloaded, etc.
If you are trying to start over and want to start with a fresh drive, same thing, except, first, run disk utility from the installer to erase the drive. Presuming you stored off your data first of course!
If you are merely upgrading to Lion, just install it. It won't delete your data unless you tell it you want to by erasing the drive.
Of course, then there's time machine if you had it, and all sorts of variations. But, I presume you know all that.
Similar Messages
-
Installing My Copy of Lion on My Wife's Computer
Hi there
I bought Max OS X 10.7 Lion from the App Store. However, I have found Lion to be quite sluggish on my 4+ year old iMac. As such I have reverted back to Snow Leopard.
My question, can I install my copy of Lion on my wife's iMac?
Thanks in advance.I believe I have the most RAM it can accept, 4GB. Apart from an external Time Machine/backup drive, I have another external drive with software downloads and media from friends - both USB 2 drives.
Ninety-nine percent of the things I use are stored on the built-in iMac drive.
I suspect some of the new Lion features are slowing it down (such as the ability to save versions of documents and the ability to save an application's state). Performance was fine previously on Snow Leopard and earlier.
For the record my iMac was bought in November 2007; specs are:
Mac OS X 10.6.8
2.4 GHz Intel Core 2 Duo
4GB 667 MHz DDR2 SDRAM
iMac drive: 316GB (135GB available)
(Any suggestions appreciated tho) -
Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William
reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates. -
After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support -
How to use Recovery DVD to install new copy of OS and CUSTOM PARTITIONS?
Hi
I have problem with start appropriate recovery function from created Thoshiba Recovery DVD.
I burn two DVD using Toshiba Media Recovery Creator witch was preinstalled on my computer. Now I want to use it to install new copy of Windows 7 OS on my laptop. BUT I would not want to clear entire HDD. I want to format only C: partition, and leave data on my D: partition. Also I want to define C: partition size.
When I insert DVD and boot form it, some app start but display info that all partition will be removed. I can not choose another option.
How can I do it?Hello
Check please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
I think everything must be explained there. If you have more questions please let us know. -
Installing Second Copy of Lion on VM
I just purchased a Mac mini with Lion installed and I can't seem to simply download a second copy from the App Store. I'd like to take advantage of the new OS license terms and install a second copy of Lion in a VM to serve as a test bed for my software development work. Does anybody know how I can get a free second copy of Lion to install on my VM?
http://hints.macworld.com/article.php?story=20110803234424130#lsrc.nl_mwhints_h
-
Installed New Version of Lion... Where is iPhoto??
Long story short I had a lot of startup issues with my 4 Year old Macbook Pro, I whiped the drive, formatted, and instead of re-installing from my time machine I installed a fresh new version of Lion so I could leave all my old issues behind. Everything loaded fine, I installed iWork from disk, etc... However iPhoto is gone and does not show in my app store purchases to re-download. If I am not mistaked iPhoto CAME on the computer when i bought it. Is there any way to get it back since I am previous owner?? Or do I have to re-purchase the app :-(
iPhoto CAME on the computer when i bought it
That is probably so. It is probably still on the DVDs that shipped in the box with your new Mac. But you did not install that version, you wiped the drive and installed Lion.
So your choices are:
a) Install the old version that included iPhoto, and upgrade to 10.6.8, and re-install Lion on top of it.
b) pay the price and buy a new copy of iPhoto, which will be iPhoto '11.
IF you will be annoyed that the tool palettes no longer "float", but are fixed on the right side of the screen, DO NOT buy the new version. -
I have recently download new OS Mountain lion on my macbook (white late 2010 model). I had snow leopard before.
On iphoto, when i was viewing my photos in a single-photo view (double clicking on a photo), i was unable to go to the next photo/previous photo using my trackpad. Only way i could do this was by pressing arrow buttons on my key board.
If i remember correctly, i was able to do this by using 3 fingers (sliding left to right or sliding right to left) on snow leopard.
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
I have checked my trackpad setting and everything seems to be right.
Any ideas how i could fix this?
Thank You
p.s. i have iphoto 09Terence Devlin wrote:
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
This works here - but I'm on iPhoto 11. IIRC it worked on 09 too though.
It's not working for me. -
My Daughter is currently upgrading her MacBook Pro to OS X Lion. During the upgrade the system rebooted and then stops at the OS X Utilites menu. I have installed this same upgrade on My MacBook Pro and the family iMAC without issue. Did the upgrade encounter a problem? The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.
I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.
Please help.I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.
-
How can I get Font Book to install new fonts with Lion OS X without crashing?
Font Book is unresponsive using Lion 10.7.1. When I click on Font Book icon in the dock, I get "Application not Responding". Can't install any new fonts. Anyone else having this issue?
I can get to the open Font Book window if I click on Mission Control to get there, but once there I see spinning wheel, which does not stop.
Any suggestions on how to get Font Book to work well on Lion?Quick update... I removed all non System fonts from ~/Library/Fonts and deleted com.apple.fontbook.plist from ~/Library/Preferences.
Now FontBook doesn't crash when launched.
I think I'm going to use a 3rd party application to manage all non Apple/System fonts. Hopefully that will avoid any future problems. -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Slow Boot Times after installing new SSD and Lion
Can anyone please help interpret why I'm having slow boot times? I have copied my console printout during the boot and it seems to be doing a repetitive action while booting.
Thanks
13-01-04 2:50:24.000 AM bootlog: BOOT_TIME 1357293024 0
13-01-04 2:50:25.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
13-01-04 2:50:25.000 AM kernel: vm_page_bootstrap: 942160 free pages and 32688 wired pages
13-01-04 2:50:25.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
13-01-04 2:50:25.000 AM kernel: zone leak detection enabled
13-01-04 2:50:25.000 AM kernel: standard timeslicing quantum is 10000 us
13-01-04 2:50:25.000 AM kernel: mig_table_max_displ = 73
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for TMSafetyNet
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Sandbox
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Quarantine
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
13-01-04 2:50:25.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
13-01-04 2:50:25.000 AM kernel: The Regents of the University of California. All rights reserved.
13-01-04 2:50:25.000 AM kernel: MAC Framework successfully initialized
13-01-04 2:50:25.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
13-01-04 2:50:25.000 AM kernel: IOAPIC: Version 0x11 Vectors 64:87
13-01-04 2:50:25.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
13-01-04 2:50:25.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
13-01-04 2:50:25.000 AM kernel: [ PCI configuration begin ]
13-01-04 2:50:25.000 AM kernel: console relocated to 0xf10010000
13-01-04 2:50:25.000 AM kernel: PCI configuration changed (bridge=1 device=1 cardbus=0)
13-01-04 2:50:25.000 AM kernel: [ PCI configuration end, bridges 5 devices 24 ]
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
13-01-04 2:50:25.000 AM kernel: mbinit: done [64 MB total pool size, (42/21) split]
13-01-04 2:50:25.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
13-01-04 2:50:25.000 AM kernel: BTCOEXIST off
13-01-04 2:50:25.000 AM kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
13-01-04 2:50:25.000 AM kernel: 5.106.198.19
13-01-04 2:50:25.000 AM kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffec0e9d0; max speed s800.
13-01-04 2:50:25.000 AM kernel: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13-01-04 2:50:25.000 AM kernel: com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: rooting via boot-uuid from /chosen: 1052015E-B101-3046-8932-5C6B1E6A7995
13-01-04 2:50:25.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13-01-04 2:50:25.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT256M4SSD2 Media/IOGUIDPartitionScheme/Imipenem (SSD)@2
13-01-04 2:50:25.000 AM kernel: BSD root: disk0s2, major 14, minor 2
13-01-04 2:50:25.000 AM kernel: Kernel is LP64
13-01-04 2:50:25.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
13-01-04 2:50:25.133 AM com.apple.launchd: *** launchd[1] has started up. ***
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.987 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
13-01-04 2:50:25.990 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:26.000 AM kernel: BCM5701Enet: Ethernet address c4:2c:03:01:22:c1
13-01-04 2:50:26.000 AM kernel: AirPort_Brcm4331: Ethernet address f8:1e:df:eb:b4:37
13-01-04 2:50:26.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13-01-04 2:50:26.000 AM kernel: IO80211Interface::efiNVRAMPublished():
13-01-04 2:50:27.025 AM airportd: _processDLILEvent: en1 attached (down)
13-01-04 2:50:27.274 AM com.apple.SecurityServer: Session 100000 created
13-01-04 2:50:27.000 AM kernel: in func createVirtualInterface ifRole = 1
13-01-04 2:50:27.000 AM kernel: Created virtif 0xffffff800bdffa00 p2p0
13-01-04 2:50:27.349 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:27.607 AM com.apple.SecurityServer: Entering service
13-01-04 2:50:27.749 AM UserEventAgent: ServermgrdRegistration cannot load config data
13-01-04 2:50:27.779 AM UserEventAgent: get_backup_share_points no AFP
13-01-04 2:50:28.000 AM kernel: NVDANV50HAL loaded and registered.
13-01-04 2:50:28.000 AM kernel: Previous Shutdown Cause: 5
13-01-04 2:50:28.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
13-01-04 2:50:28.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-01-04 2:50:28.332 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.333 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.347 AM com.apple.pfctl: No ALTQ support in kernel
13-01-04 2:50:28.347 AM com.apple.pfctl: ALTQ related functions disabled
13-01-04 2:50:28.363 AM com.apple.launchd: (com.sec.faxdb[73]) posix_spawn("/Library/Printers/Samsung/Fax/FaxDB/faxdbd", ...): No such file or directory
13-01-04 2:50:28.385 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb[73]) Exited with code: 1
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 300 seconds
13-01-04 2:50:28.606 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
13-01-04 2:50:28.704 AM com.apple.revisiond: 2013-01-04 02:50 revisiond[52] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
13-01-04 2:50:28.705 AM com.apple.usbmuxd: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13-01-04 2:50:28.814 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
13-01-04 2:50:28.814 AM configd: DHCP en1: INIT-REBOOT transmit failed
13-01-04 2:50:28.837 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
13-01-04 2:50:28.880 AM mds: (Normal) FMW: FMW 0 0
13-01-04 2:50:28.938 AM mDNSResponder: D2D_IPC: Loaded
13-01-04 2:50:28.938 AM mDNSResponder: D2DInitialize succeeded
13-01-04 2:50:28.990 AM configd: setting hostname to "Karr-Hong-Lees-MacBook-Pro.local"
13-01-04 2:50:29.000 AM kernel: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
13-01-04 2:50:29.000 AM kernel: DSMOS has arrived
13-01-04 2:50:29.000 AM kernel: macx_swapon SUCCESS
13-01-04 2:50:29.031 AM configd: network configuration changed.
13-01-04 2:50:29.984 AM loginwindow: Login Window Application Started
13-01-04 2:50:30.091 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 299 seconds
13-01-04 2:50:30.142 AM netbiosd: Unable to start NetBIOS name service:
13-01-04 2:50:31.000 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13-01-04 2:50:31.000 AM kernel: en1: 802.11d country code set to 'US'.
13-01-04 2:50:31.000 AM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13-01-04 2:50:31.282 AM loginwindow:
O3REQUIRE FAILED: ret == 0
- file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
- line: 91
13-01-04 2:50:31.282 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
13-01-04 2:50:31.315 AM com.apple.SecurityServer: Session 100004 created
13-01-04 2:50:31.317 AM loginwindow: Login Window Started Security Agent
13-01-04 2:50:31.347 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:32.000 AM kernel: MacAuthEvent en1 Auth result for: a8:39:44:57:2c:50 MAC AUTH succeeded
13-01-04 2:50:32.000 AM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-01-04 2:50:32.000 AM kernel: AirPort: Link Up on en1
13-01-04 2:50:32.000 AM kernel: en1: BSSID changed to a8:39:44:57:2c:50
13-01-04 2:50:32.530 AM airportd: _doAutoJoin: Already associated to “TELUS3939”. Bailing on auto-join.
13-01-04 2:50:33.000 AM kernel: AirPort: RSN handshake complete on en1
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:35.093 AM configd: network configuration changed.
13-01-04 2:50:35.113 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on TELUS3939 because it is protected and not on the exception list
13-01-04 2:50:35.116 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-01-04 2:50:35.118 AM configd: network configuration changed.
13-01-04 2:50:35.991 AM ntpd: proto: precision = 1.000 usec
13-01-04 2:50:37.270 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:43.282 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)Fixed it!
Just changed my settings to auto log on.
Hooray! -
My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit
if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5
-
Can i install fresh copy of lion on Mac without any requirement.
I have a MacBook pro 15ich core i5. i want to install fresh lion on my system without any requirement means without snow leopard. i had downloaded a lion from app store . how do i install fresh lion on my system . thnx
First, backup your system.
Reboot your system, press and hold the Command-R keys at the boot chime to enter the Recovery HD. From there you can use Disk Utilities to erase your Macintosh HD and then reinstall Lion. You will need an internet connection and I can't remember if you'll be prompted for your Apple ID and password prior to Lion downloading. -
How do i make abackup copy of Lion with a UBS2?
I am thinking about downloading Lion, i do not have a external harddrive. So i need to make a backup copy. I have a brand new unused Kingston USB. Once i have copied the software to the USB, where do I install it from? The copy on my USB? Or the original on my desktop? If you can offer any advice on this procedure, I would be grateful because i hardly ever download, and i've never copied anything of this importance before.
When you download Lion it will put the installer in your Applications folder and present you with an 'install Lion window'. Before clicking on the install screen copy the Lion installer to the USB drive (USB drive needs to have at least 4gb of available space). Eject the USB stick and continue with the installation. Once the Lion install is finished the installer in the applications folder will disappear so you are wise to copy it first.
Edit: As a side note, from your description it sounds as though you don't have an external back-up of all the important data on your Mac. I'd really recommend getting an external and at least keep a Time Machine backup.
Legend has it that there are two types of disk drive - one that has failed and one that hasn't failed yet. Having a backup in place will save you a world of pain. I know this for a fact .
Maybe you are looking for
-
i tried going on my computer then on (f:)(usb drive for ipod nano) and it only shoes me my calander,notes and contacts. oh and there is nothing i could see in itunes7. plz help
-
I have a data-entry page that I created using the Page with Form component wizard. It is suddenly not working. As far as I can tell is that it started after I changed the process Success message in the 'Process Row of ...' process that was automatica
-
How to insert records with LONG RAW columns from one table to another
Does anybody know how to use subquery to insert records with columns of LONG RAW datatype from one table to another? Can I add a WHERE clause in the subquery statement? Thanks.
-
WSDL of my SAP ERP 04 Enterprise Services
Hi, if i look at the WSDL Definitions of the Enterprise Services (mySAP ERP 04, http://esapreview.sap.com/socoview) there are no Endpoints etc. defined like in Web Service WSDLs. For example the Service CostCentreVarianceBudgetMonitoringRuleEvaluatio
-
Assigning rows in JTable a set text colour depending on a column value
Hi Guys I am sending my table a vector containing data from an Oracle db. The data will have one column named type, and it will be either 'Training' or 'Holiday'. I want the text of the entire row in the table to be Blue if the Type is 'Training', an