Install new programs using existing MIDLet

Hi,
Can any one tell me how can I install new programs remotely using an existing MIDlet on a mobile device.
My existing MIDLet is setting on the cell phone and will accept my incomming connections and will download the new software in the memory. I now need that software to get installed on the cell phone.
How do I do that.
IIs there any defined way of installing packages.
Is there something like Runtime.execute() method.
Waiting for response
TIA
Zoha

This issue may be due to a missing symbolic link; to replace the link under 10.3 and newer, open the Disk Utility in your /Applications/Utilities/ folder and run the Repair Permissions command.
(9818)

Similar Messages

My Mac won't open certain files anymore so I can't install new programs.

I accidentally reset the default application used to open new programs that I try to install and now it won't open. It's set accidentally to use ScriptEditor. I'm not sure what "program" was used originally to open them, so I don't know what to reset it to. How do I fix it so I can install new programs again?

Hi VoxPariah, and a warm welcome to the forums!
An alternative to Klaus1's fine advice...
Reset Launch Services...
http://www.thexlab.com/faqs/resetlaunchservices.html
http://www.macosxhints.com/article.php?story=20031215144430486

Dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk,

dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk, what can I do?

Well I was able to obtain a work around download of Flash and it installed fine but Firefox tells me it needs updating so I go out, thinking I'm "IN" finally to update it and I get that issue of not being able to get the update for it. It's a regular laptop, not a touch screen or one of those new fangled ones for todays world. In fact it's a refurb so it's probably origin date was a year or so ago before all this MS stuff took off fully. So not understanding why I'm feeling like I'm being BLOCKED from getting the updated Flash I need and desire. If I click on the little "X" and tell it to ignore the warning the vid will play just fine but don't want to have to do that every time. Must be a better way.
Again, I'm sorry for posting in the wrong forum, getting this posted in the Flash forum was my desire but the way Adobe has this set up I just couldn't figure it out. I belong to ALLOT of forums and most are pretty straight forward but this one is confusing!

Installing new programs

Hello,
Have tried to install new programs onto Leopard, but the computer does not seem to want me to do this. When I insert and dmg. file or the CD containing the program...the computer reads it, allows me to drag to applications, or to open the VICE file for installing, but then it does nothing...absolutely nothing. I tried this with OFFICE 2004 and MAc-Link and Appleworks (which I am slowly replacing anyway, but there are some wonderful things there still for me).
Why won't the computer allow me to install these workable programs...some seem to work well on my PowerBook, but not on this desktop G5.
Go raibh maith agat
Tom

Thank you Jeffrey Jones, you just saved me $89 as I was considering buying iWork.
I don't know why I thought Appleworks wouldn't run on Leopard, perhaps because of its pre Aqua theme.
I was surprised it even ran on OS X, though of course it did come bundled with OS X.
It always looks a bit of a black sheep, more at home on OS 8 than OS X. And so, from its deceptive appearance I thought that an Intel computer would surely pass it by, but no.
Consistent with its black sheepiness, it is the sole PowerPC app, showing in Activity monitor.

Creating new DC using existing DC like copy paste

Dear friends,
Any steps how to create a new DC using existing DC.
I would like to create a new DC which is exactly equal to other DC like copy paste.
Early reply appricated
Many thanks.
Lakshmikanthaiah

Hi,
Create the DC in the Track with same name.
to do this, you need to remove the DC name reservation in the SLD,
After that, copy src of old project and paste in the new project,
before copying the src, you have to add the depedencies in your new dc as per the old dc, becuase the copying won't take the dependent dc reference,
after adding the dependent dc's you can copy the src to new dc,
when you paste the src under new dc's that should promt you for add some files to acitvity, other wise delete the src and paste it again until u get the popup to add files to activity,
after pasting - repair the dc project strucutre, roload and rebuild after that check manually all the depenceies are working, now you can build the dc and deployee,
this process work for only for the same naming dc's,
i have done this, this will work fine,
Cheers,
Apparao

Unable to install new programs

I am unable to install new programs to my Mac book. The Mac's personal specifications is as follows:
Software: Mac 10.5.4
Startup disc: Macintosh HD
Memory: 1G 667 MHz DDRZ
When every I am trying in install or update my programs it gives me the following message and nothing I do can change it:
Selection a Destination:
Macintosh HD (111GB (13.8GB free) and !
Installing this software requires 85.4MG of space
You cannot install Norton Antivirus on this volume. This software must be installed on a volume containing Mac OS X version 10.4.10 or later.
HOW CAN I RESOLVE THIS. Even if I go onto the internet to update my software it does not allow me to.
Your urgent assistance is desperately needed. HELP :o)

Verify the version of Norton Anti-virus you have is 10.5.4 compatible.
Make sure your hard drive is less than 85% full (an arbitrary number which appears to create problems for Mac OS X)*:
http://www.macmaps.com/diskfull.html
Note running Norton Anti-virus on the Mac is normally something that's only needed to prevent you from becoming Typhoid Mary, more than prevent you from getting a Mac OS X virus, as there are none in the wild. There are some proof of concept trojan horses, but that's about it.
- * Links to my pages may give me compensation.

Problems with installing new programs

Dear all,
since the update to OS X Yosemite, I have some problems with installing new programs.
I tried to install the Fitbit App to connect my Fitbit to my Mac but the program can't be started after installation. I have the same problem with Blackberry Blend, too. I am able to install it but it doesn't start running.
Does anybody have an idea what's the problem?
Thank You,
Lisa.

Did you receive any errors during the installation itself or does this happen when you try to open Photoshop?

I can't Install new programs

When I try to install new programs the system goes through all the normal motions but when I get to the password area I start having problems. I enter the admin password and hit ok then nothing happens. It is like I never tried to install anything or like I never hit the setup at all.

production guru wrote:
When I try to install new programs the system goes through all the normal motions but when I get to the password area I start having problems. I enter the admin password and hit ok then nothing happens. It is like I never tried to install anything or like I never hit the setup at all.
Are you running Leopard?

I normally dont need a login when I install new program, but I try to Install a new flash player im asked to write a login and I have no clue? when I search for help it suggest to put in the original installation cd but that doesnt work. Please help!

When Trying to install the newest Flash player, Im asked to fill in my login.
I have no clue what my login is. (It happened very rarely that I was asked to fill in this when installing a new program, and the login I have used before are not valid now.
When I search for help, I am suggested to put in the original installation Cd.. and press the "C" button when I hear the starting sound... but when I do this nothing is happening.
Please Help me If you have an idea for a solution to this problem!
/ Joel

You need the admin password you created when you first set up the machine. Just about every installer running under OS X will require you to authorize the installation by entering an administrator password - even software update requires this. You really should not forget your admin password, as it is required for many things in OS X since, unlike Windows, you often need to manually type in the admin password to proceed with an install or update (whereas Windows will take admin authority, if you are logged in as an admin, by simply clicking continue or yes).
If you cannot remember your admin password, you can reset it from the recovery CD that came with your mac - http://support.apple.com/kb/HT1274

Instaling new programs

When instaling a new program the instalation software freezes as soon as click agree on "accept on the terms and agreement." Because of this glitch I can't even get to disk utilitys to fix the problem.
Any suggestions?
G5 Mac OS X (10.3.9)

Hi Again Konstantin!
Run Repair Disk, and Repair Permissions. Instructions below.
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key.
2.Once started up from CD or DVD, choose Disk Utility from the Installer menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, then re-run Repair Disk until no errors are reported.
7.When finished, select Quit Disk Utility from the Installer menu.
8.Select Quit Installer from the Installer menu.
9.In the resulting pop-up window, choose restart.
10.After the computer has restarted, you can eject the CD.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP until the only messages it reports, are listed in this article.
Spurious Permissions Errors Using: 10.3.x
When "Repair Permissions" is complete. Quit "Disk Utility".
Good Luck!
ali b

Dv6000, installed new HDD, used recovery disk DVD, computer keeps restarting on it's own

HP dv6402ca
Installed new HDD - WD Scorpio Blue 500G
I ordered the recovery disk DVD from Computer Surgeons.
I installed the recovery in drive bay and restarted as per instructions. Everything went fine and when it started windows for the first time that went ok as well, it kept restarting like it said it would to install all software. Now, with everything installed it is still restarting on it's own. I let it go on overnight as I thought this might be normal, but when I got up 5 hours later it was still restarting.
I don't what else to do, please help.
Andrew

Hi, Andrew:
Sometimes it takes a while. You may want to abort the installation and try again.
You may also want to use this workaround if you can't get the recovery disks to work.
If you can read your 25 character MS product key, you can make your own Windows Vista installation disk. Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them (just short of going ahead with the actual install) and they appeared to work perfectly.
Apparently when you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-vi...
After you successfully install vista, you can download the drivers you need from your PC's support and driver page.
Paul

How can i install any program using java code

Hi friends,
i want to know how can i install any software using c# code.

Hi,
You may change your title, Since this is C# forum.
>>i want to know how can i install any software
usingc# code
So what kind of your software?
In C#,we can install and uninstall "*.msi" files (setup).
The code to install software without user interface is:
private void installSoftware()
Process p = new Process();
p.StartInfo.FileName = "msiexec.exe";
p.StartInfo.Arguments = "/i \"C:\\Application.msi\"/qn";
p.Start();
For more detailed information, please refer to article
C# - Installing and uninstalling software in codeproject.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to install new fonts using code in java?

Hi,
How to install font in a system using java, provided i know the font file's address. Is there any specific class/method available for this purpose? Copying the file to windows/font directory will work for windows, but I think it wont be generic to all operating system. So is there anyway to install a font using code?
I also want to know how to make the font available only until my application window is open, It must be available to all other external applications like photoshop, word etc., When I close my window it must un-install automatically or be made not available to other applications. Any suggestions? Please do help! Thanks in advance...

I have already tried the above, But the font created using input stream is available only to my application* and is not viewable in photoshop.*. I realize this. Like I said, I know of no method that will register/deregister the font with the system. You'll have to create your own method that takes the operating system into account.
String os = System.getPropery("os.name");
if(os.equals("Windows Vista")) {
}else if(os.equals("Windows XP")) {
}else if(os.equals("Windows NT")) {
}else if(os.equals("Solaris")) {
AIX
Digital Unix
FreeBSD
HP UX
Irix
Linux
Mac OS
Mac OS X
MPE/iX
Netware 4.11
OS/2
Solaris
Windows 2000
Windows 95
Windows 98
Windows NT
Windows Vista
Windows XPYou'll need the standard font directory for each system. I think all the window ones are C:\Windows\Font\ . Each OS probably has its own little quark (like having several font directories or throwing different security exceptions). Undoubtly it's going to require some research and a bit of trial and error. You can probably work some magic with Runtime.exec(...) as well.
The alternative would be to google for some libraries that offer similar functionality, or promt the user for the system's font directory and save the location of the directory in a file somewhere for future use (so the user dosen't have to specify the font directory everytime he/she starts up the application).

Airport drive not showing up as one of the options when installing new programs

I purchased a large 120GB soundbank (Komplete 9 from Native Instruments) and need to install it to my MacBook Air which does not have enough space on the internal drive.
I have a 2TB Airport capsule and thought I would be able to install the program on there but it does not show up as an available option when I try to install the program (see screenshot). Do I need to buy an external drive that plugs in via USB instead? I'm hoping I don't need a MacBook Pro instead...
Thanks a lot.

Programs usually aren't the biggest culprits in terms of space usage, it's normally data files that take up more space. This kind of huge library really is best installed on an external drive, provided you don't mind carrying it around with you. Here's how you install it on an external:
http://www.native-instruments.com/en/support/knowledge-base/show/1072/how-to-ins tall-the-komplete-9-content-on-an-external-hard-drive-mac/
Matt

Trying to install new font using Pages w/my IPad. The program IDo keeps trying to open it. Any suggestions?

Am pretty new at this, any suggestions would be most appreciated..

You cannot install any fonts in any app on the iPad.

Install new programs using existing MIDLet

Similar Messages

Maybe you are looking for