Install new repository 10g XE

Hi all.
I am having trouble when trying to "meet" all requirements for installing new repository.
Since I am in learning phase of all what is Oracle I don't know how to solve the problem.
When I try to install new repository instance, i recive error - "you don't have select on sys.v_$parameters, ..cannot proceed".
I managed to grant myself all privileges except "Required object privileges", they are all unchecked. I tried to grant them logged in as system user but then I get "ORA-01031: insufficient privileges".
So what am I doing wrong, any ideas or links "how to install...".
Thx in advance.
bye.

Yes designer repository.
Sorry I thought it's the only one(if there are other repositories).
Anyway the one you need to start Designer. When trying to launch designer it gives me message "This user does not have an installed Repository. Invoke the Repository Admin. utility".
So Oracle 10g XE doesn't have this option?

Similar Messages

Cannot install new repository

Hi
I've installed designer 6i and oracle server. When install new repository, it says:"IMP-00016 not supporting character set translated (from 31 to 852)". I can't continue. Why? Help!

Check that you are using the correct imp.exe.
Check in the RAU that the parameter string execute_import is pointing to an 8.1.6/7 imp.exe.
David

Problem on installing new Repository

I have encountered the following error while installing a new Repository Instance at Repository Administration Utility, plz help, thx a lot.
Message
CDR-21244: This process has been aborted.
Cause
The .msg message file 'f:\ids92\repadm61\cdrzus.msg' for product "CDRMSG61", utility "CDR" could not be found.
Action

See note: 190092.1 on Metalink.
Resolving the CDR-21244 error obtained while doing a Repository
installation against a Unicode database (8i or 9i) and having
the client side setup with a Unicode characterset such as UTF8.
Good luck,
ANdrew

Migrating Designer Repository 6i to Repository 10g

My client has an Oracle Designer repository 6i Version 6.5.92.1.9 Release 4.7.(Repository 9i).
He has created an Oracle Designer repository 10g (latest version) onto another server.
He wants to migrate his Repository 6i into his new repository 10g.
Is it possible to do this, if not could you tell me more.
Thanks

He ought to be able to use the Export in the Repository Administration Utility (RAU) in 6i to export the repository and Import in the RAU in 10g to import it. Two caveats:
1. Don't try to go from a versioned repository to a non-versioned one. I think the other way around works, but I don't have mine versioned, so I don't know for sure.
2. Make absolutely sure that you are using the right EXP for the database version in which the 6i repository is stored and the right IMP for the database version in which the 10g repository is stored. Check the EXECUTE_EXP and EXECUTE_IMP registry settings on each. I've seen a lot of problems that could be avoided by using the right export and import.

Error in installing a new Repository in OWB 10g Release 2

Hi,
I am facing a consistent problem in creating a new repository, even after uninstalling and re-installing the OWB client many times. While creating a repository, I get the following three errors, after which the Repository Assistant automaticlly shuts down:
1. The wizard noticed that the installation parameter 'enqueue_resources' of the database GRUSIT is set to 968. The recommended value for Warehouse Builder is 3000.
2.The Warehouse Builder repository owner installation failed on user REPOWNER.
java.sql.SQLException: ORA-04031: unable to allocate 4080 bytes of shared memory ("shared pool", "BEGIN
DECLARE
PROCEDURE brow...", "PL/SQL MPCODE", "pl/sql DS pg")
3.INS0029: Error occured during installation. Check the log file
F:\OraHome_1\owb\UnifiedRepos\log_070504_115828.000.log
for details.
Could you pls help me in resolving this issue?
Thanks in advance,
Tanvi

Does this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg

I cannot Install a new repository

please help me. I cannot install a new repository whith Repository 6i. I got the message : CDR- 21244 This process has been aborted.
in the cause : The .msg message file 'c:\oracle\orades\repadm61\cdus.msg' for product "CDRMSG61", utility "CDR" could not be found.
please if you have any information about this problem

I got the same, installing des2k 6.1 server side on win2000 to oracle server 9i under linux.
Now it works partially. tips:
check that: 1) you are admin 2) the sequence in the path is correct (des2k/bin directory could have wrong exe respect the $oracle_home/bin) 3) oracle_home is correctly set
But i got another error, during the installation process!
log: ckrau61.log
CAWRepositoryQueryObject - Executed SQL statement :- CREATE OR REPLACE VIEW CI_ROOT_APPLICATION_SYSTEMS [...cut...]
---> gives me that the name of the constraint is invalid or missing.
I can "repeat the last action" but the process faults and closes .
helpme pls...
I encountered the same problem. I tried to install the repository from a Windows2000 client machine on a Linux host where the Oracle 9.2 instance is running. The first problem was an abort of the semi-automatic installation procedure due to a non-working tablespace-creation statement in the supplied scripts. After fixing this manually, the repository manager starts with several error messages, one of them the one below.
Can someone help?
please help me. I cannot install a new repository whith Repository 6i. I got the message : CDR- 21244 This process has been aborted.
in the cause : The .msg message file 'c:\oracle\orades\repadm61\cdus.msg' for product "CDRMSG61", utility "CDR" could not be found.
please if you have any information about this problem

Error while installing a new repository.

I installed disigner 6i & Oracle 816 Enterprise Edition.After I create some tablespaces and user following the installation guide,and then could log in the Repository Administration Utility to install a repository,the error of CDR-21244 occured.
who could tell me the reason?
null

I check the log file,it look like following:
ckrau61 File '..\awr\awrcon.cpp' at line:371 -FUNCTION CALLED- CAWRepositoryConnection::GetConnectString
ckrau61 File '..\awr\awrcon.cpp' at line:394 -FUNCTION CALLED- CAWRepositoryConnection::GetConnectString
ckrau61 File '..\awr\awrcon.cpp' at line:394 -FUNCTION CALLED- CAWRepositoryConnection::GetConnectString
And i tried more times on different machines, the error is same.
Help!!!!!
null

The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

hi
In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
1-configured my “System DSN"
2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
please help me
regard

1.Place tnsnames.ora file in the following paths,
E:\obiee11gtmt\oracle_common\network\
E:\obiee11gtmt\Oracle_BI1\network\admin
2.Navigate to
E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
Open user.sh file in a notepad
Set Tns_names paths as shown below with your tnsnames.ora file’s location,
set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
The above path is of your installed Database tnsnames.ora file
I guess you didnt do this step. This will solve your issue.
Restart all the services
If helpful, please mark the answer.
Srikanth

NLS error in building a new repository

Hi every body
I reported my problem in building a repository in OWB 10g, but no one replied to me! I tried more ane half of my problem was solved. I instaled the oracle data base 10g release 2 and now I can connect with Enterprise Manager to my data base. But I still have problem in building a new repository. When I complete the wizard of creating a new repository, the following error is shown:
cannot access NLS data file or invalid environment specified.
I checked my ORACLE_HOME. At first, this variable was empety, then i changed it to the oracle home and also to DWB_HOME, but the error was not removed.
any direction is welcome,
Thanks.

But this is not happening for other pages..only this page is creating problem...
This region I am creating for the page whose navigation is as shown below:
1) Login as PO Super User
2) Go to Requisition Work Bench -> Requisitions -> Summary -> Lines Tab.
In this page in the search region I need to add one Criteria Item named Requisition Description
Now in our development instance,creating a Criteria Itme for this region through personalization is not enabled. But the same thing is enabled in the Test Environment. However if I go and just click on Create Item -> Criteria row and provide the id name and click on Apply the page is erroring out. Would anyone please try replication the same in their available instance and let me know whether they are facing similar issues.

Installing New Grid & Copy/Migrate Jobs From New Grid

Existing Setup:_
EM Grid Control: 10.2.0.2 Hosted on Windows 2003
Repository Database: 10.2.0.3 Hosted on AIX 5.1
Agent: 10.2.0.2
Monitored Databases/servers: About 90 servers/databases are monitored which are on AIX and having 10g DB version and agant installed in 10.2.0.2
Proposed Setup:_
EM Grid Control: 10.2.0.5 Will be hosted on AIX 6.1
Repository Database: 10.2.0.4 Will be hosted on AIX 6.1 (different server from EM Grid control server)
Agent: 10.2.0.5
Monitored Databases/servers: All the existing servers + Oracle E-business Application
We are planing to install a new grid with option of installing with existing database(New 10.2.0.4 database will be installed). Once new grid start working properly, we will stop old grid.
During this process we don't want to stop/modify/change the existing grid jobs..
So, My questions are:
1) Can we have two agents (both with different OS users and having different AGENT_HOMES) on each server, which will feed to different grids? Old one will be stopped eventually.
2) How we can copy/migrate existing jobs from old grid to new grid ?

>
>
We are planing to install a new grid with option of installing with existing database(New 10.2.0.4 database will be installed). Once new grid start working properly, we will stop old grid.
During this process we don't want to stop/modify/change the existing grid jobs..
---- When you the existing database option , new repository will be created with user SYSMAN.
So, My questions are:
1) Can we have two agents (both with different OS users and having different AGENT_HOMES) on each server, which will feed to different grids? Old one will be stopped eventually.--- You have two different agents home on each server as source to different grids.
2) How we can copy/migrate existing jobs from old grid to new grid ?--- You can clone the database and use the cloned database jobs for your new grid. Even cloned database can be used for your new grid.

What Are the Tables in new oracle 10g express

Hi guys,
I am new at oracle and I just installed the Oracle 10g express. after login to the oracle by SQL Developer I noticed there are lots of tables in table folder which some of them come with $ and some not! can you please let me know what are these tables for? are they like system tables in SQL Server? if so then what are the tables under
-->Other Users/System/Tables?
I am lost here and I can't figure out what are the Other Users? are they like databases? I tries to google them but I couldn't find any thing
Thanks a lot

http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/toc.htm
SELECT USERNAME FROM ALL_USERS;
USER/SCHEMA are to Oracle; what database is to SQL_Server
Edited by: sb92075 on Apr 22, 2011 5:53 PM

Need help Installing OID Repository on existing database server using RepCA

I have an oracle database server running 10g (10.2.0.4) and I want to install metadata repository on it. I downloaded the Application Server Metadata Repository Creation Assistant 10.1.2.0.1 (standard edition).
I find that there are no batch files in the download, just setup.exe. When I run that I am asked for an ORA_HOME - when I provide the home where the database is installed I get the message that the home already has the database and the software cannot be installed on it.
How do I add the repository to an existing instance of oracle database server? Also, is the version I downloaded the right version #
Thanks

Hi sameer khan,
first let me ask, are you talking about Netweaver04s (WAS 7.00), in this case my answer can give you some hints.
Note 883948 gives information of the installation of an additional usage tye (like BI JAVA)
You have more than one possibility to install the usage type BI JAVA. The most common installation types are:
1. BI installation and a separate BI JAVA installation with 2 <SID>
2. BI JAVA Addin Installation in an existing NW04s
I recommend to use option 1:
In case you install a separate BI-JAVA instance, you need a separate <SID> for your J2EE environment. In this case it is not possible to use the same <SID>. This installation can be done on the same or a separate server. Furthermore, you can use a separate database or install the J2EE instance in the same database (--> MCOD). I recommend to use a separate database. Note: In this installation option, Sapinst normally installs a separate user store. With the usage type BI JAVA it makes (in most cases) sense, to use the user store of the BI system, where it belongs to. If you want to do so, "Revise" the user store option before you start the installation and and choose the production client of the BI system.
If you like to use an Addin Installation, another <SID> is not possible. I would only recommend this kind of installation in test environments.
It doesn't matter, which kind you choose, after installation, you have to do the steps for "Setting up bex Web", see Note 917950. This is sometimes a little bit tricky, with Note 937697 there is a Support Tool, which can help.
Good luck with your installation
Kind Regards
Marc

Installing Enterprise Manager 10g Grid Control Using an Existing Database

I want to install Enterprise Manager 10g Grid Control 10.2.0.3 using an existing database. This database is RAC 10.2.0.2. and I use it as Infrastructure Metadata Repository.
I is said in Oracle documentation that SYSMAN schema has to be dropped, thus Database console repository has to be dropped. As far as I understand after Grid Control installation I will not be able to use Database console for my RAC 10.2.0.2 Infrastructure Metadata Repository database. I will be able to use only Grid Control for this database.
Am I right? Could you give me any advice about Installing Enterprise Manager 10g Grid Control Using an Existing Database?
Thank you.

I am trying to install the OEM rel 2.0 on AIX 5L from the downloaded software zip files which are as below,
AIX_Grid_Control_full_10201_disk1.zip (656,766,406 bytes) (cksum - 2157028496)
AIX_Grid_Control_full_10201_disk2.zip (655,758,726 bytes) (cksum - 2350778444)
AIX_Grid_Control_full_10201_disk3.zip (641,760,716 bytes) (cksum - 2053607771)
AIX_Grid_Control_full_10201_disk4.zip (606,903,411 bytes) (cksum - 4162514797)
AIX_Grid_Control_full_10201_disk5.zip (576,555,758 bytes) (cksum - 3304661461)
AIX_Grid_Control_full_10201_disk6.zip (459,658,650 bytes) (cksum - 3120478203)
AIX_Grid_Control_full_10201_disk7.zip (311,903,435 bytes) (cksum - 2438252536)
AIX_Grid_Control_full_10201_disk8.zip (224,594,251 bytes) (cksum - 2618845234)
I am unable to locate the runInstaller in any of the disks 1- 8 ,can somebody help me on this. Thanks

How to create new repository in Oracle 6i

In a completely new Oracle 6i (R6.) installation there seems to be now way to create a new repository. All the help and documentation existing connections, expect a pre-existing database to exist, or a directory
ORACLE_HOME\ADMIN\user\
to exist with a config file in it.
None of these conditions is true upon a clean, default installation.
Is there a short list of command line Repository Admin commands that one can begin with?
(signed, confused newbie just starting Oracle courses ;-)

Hi,
You need to install an Oracle database instance. The Repository Administration Utility (RAU) is then used to install the Repository schema into the database.
Follow the installation guide that comes with Oracle 8i to install the database first.
Brian

Eclipse Mars Install New Features/Update fails with HTTP Code 416

Hi,
I'm currently trying to update my working Eclipse Luna (for Java and DSL
Developers) to the new Mars version (seperate fresh installation), but I keep getting an error, which I was unable to resolve.
The workstation has to use a corporate proxy and it was always a little bit tricky to get the Eclipse Marketplace and Install New Feature/Update working. My Luna Eclipse is configured (network settings) to use "Manual" as Active Provider, with the correct host + port + user + password combination. I also got the known bugs
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281472 and
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281384 , so I added the infamous "-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4"
option in the eclipse.ini. While this is working in Luna, I cannot use the Marketplace or Update features in Mars.
I can open the Marketplace and it actually shows all the plugins, I can select one for install and the plugin-dependency-tree is show, but the next step fails with the following message:
eclipse.buildId=4.5.0.I20150603-2000
java.version=1.8.0_45
java.vendor=Oracle Corporation
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=de_DE
Framework arguments: -product org.eclipse.epp.package.dsl.product
Command-line arguments: -os win32 -ws win32 -arch x86_64 -product org.eclipse.epp.package.dsl.product
org.eclipse.equinox.p2.transport.ecf
Error
Mon Jul 27 09:41:12 CEST 2015
Unable to read repository at http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar.
java.io.IOException: Server returned HTTP response code: 416 for URL: http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.getDecompressedStream(UrlConnectionRetrieveFileTransfer.java:552)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.openStreams(UrlConnectionRetrieveFileTransfer.java:322)
at org.eclipse.ecf.provider.filetransfer.retrieve.AbstractRetrieveFileTransfer.sendRetrieveRequest(AbstractRetrieveFileTransfer.java:885)
at org.eclipse.ecf.provider.filetransfer.retrieve.MultiProtocolRetrieveAdapter.sendRetrieveRequest(MultiProtocolRetrieveAdapter.java:146)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.sendRetrieveRequest(FileReader.java:424)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.readInto(FileReader.java:358)
at org.eclipse.equinox.internal.p2.transport.ecf.RepositoryTransport.download(RepositoryTransport.java:101)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:178)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:219)
at org.eclipse.equinox.internal.p2.repository.CacheManager.updateCache(CacheManager.java:402)
at org.eclipse.equinox.internal.p2.repository.CacheManager.createCache(CacheManager.java:259)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.getLocalFile(SimpleMetadataRepositoryFactory.java:66)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.load(SimpleMetadataRepositoryFactory.java:88)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.factoryLoad(MetadataRepositoryManager.java:57)
at org.eclipse.equinox.internal.p2.repository.helpers.AbstractRepositoryManager.loadRepository(AbstractRepositoryManager.java:768)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.oomph.util.ReflectUtil.invokeMethod(ReflectUtil.java:116)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:344)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:146)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager$Metadata.loadRepository(CachingRepositoryManager.java:394)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:96)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.AbstractProvisioningOperation.addRepositories(AbstractProvisioningOperation.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.computeInstallableUnits(ProfileChangeOperationComputer.java:385)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.run(ProfileChangeOperationComputer.java:165)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:119)
Check for Update shows the same result.
I tried googling for this kind of error, but it seems no one has reported this problem so far. I'm a little bit lost what to do now (apart from using Luna again), since exactly the same configuration is working in Luna, but is unusable for me in Mars. The network access seems to work because Mars can load the dependency tree of a Marketplace plugin. Every other combination in the network settings fails because of the corporate proxy.
So, any suggetions how to find the root cause? It's quite possible the corporate proxy is misconfigured, but I hope you can help me finding the difference between the working Luna and the (for me) broken Mars, so I know what has to be configured differently. Something seems to be changed in the way the packages are downloaded.
Thank you very much!

Hi,
I'm currently trying to update my working Eclipse Luna (for Java and DSL
Developers) to the new Mars version (seperate fresh installation), but I keep getting an error, which I was unable to resolve.
The workstation has to use a corporate proxy and it was always a little bit tricky to get the Eclipse Marketplace and Install New Feature/Update working. My Luna Eclipse is configured (network settings) to use "Manual" as Active Provider, with the correct host + port + user + password combination. I also got the known bugs
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281472 and
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281384 , so I added the infamous "-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4"
option in the eclipse.ini. While this is working in Luna, I cannot use the Marketplace or Update features in Mars.
I can open the Marketplace and it actually shows all the plugins, I can select one for install and the plugin-dependency-tree is show, but the next step fails with the following message:
eclipse.buildId=4.5.0.I20150603-2000
java.version=1.8.0_45
java.vendor=Oracle Corporation
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=de_DE
Framework arguments: -product org.eclipse.epp.package.dsl.product
Command-line arguments: -os win32 -ws win32 -arch x86_64 -product org.eclipse.epp.package.dsl.product
org.eclipse.equinox.p2.transport.ecf
Error
Mon Jul 27 09:41:12 CEST 2015
Unable to read repository at http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar.
java.io.IOException: Server returned HTTP response code: 416 for URL: http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.getDecompressedStream(UrlConnectionRetrieveFileTransfer.java:552)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.openStreams(UrlConnectionRetrieveFileTransfer.java:322)
at org.eclipse.ecf.provider.filetransfer.retrieve.AbstractRetrieveFileTransfer.sendRetrieveRequest(AbstractRetrieveFileTransfer.java:885)
at org.eclipse.ecf.provider.filetransfer.retrieve.MultiProtocolRetrieveAdapter.sendRetrieveRequest(MultiProtocolRetrieveAdapter.java:146)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.sendRetrieveRequest(FileReader.java:424)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.readInto(FileReader.java:358)
at org.eclipse.equinox.internal.p2.transport.ecf.RepositoryTransport.download(RepositoryTransport.java:101)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:178)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:219)
at org.eclipse.equinox.internal.p2.repository.CacheManager.updateCache(CacheManager.java:402)
at org.eclipse.equinox.internal.p2.repository.CacheManager.createCache(CacheManager.java:259)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.getLocalFile(SimpleMetadataRepositoryFactory.java:66)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.load(SimpleMetadataRepositoryFactory.java:88)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.factoryLoad(MetadataRepositoryManager.java:57)
at org.eclipse.equinox.internal.p2.repository.helpers.AbstractRepositoryManager.loadRepository(AbstractRepositoryManager.java:768)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.oomph.util.ReflectUtil.invokeMethod(ReflectUtil.java:116)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:344)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:146)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager$Metadata.loadRepository(CachingRepositoryManager.java:394)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:96)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.AbstractProvisioningOperation.addRepositories(AbstractProvisioningOperation.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.computeInstallableUnits(ProfileChangeOperationComputer.java:385)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.run(ProfileChangeOperationComputer.java:165)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:119)
Check for Update shows the same result.
I tried googling for this kind of error, but it seems no one has reported this problem so far. I'm a little bit lost what to do now (apart from using Luna again), since exactly the same configuration is working in Luna, but is unusable for me in Mars. The network access seems to work because Mars can load the dependency tree of a Marketplace plugin. Every other combination in the network settings fails because of the corporate proxy.
So, any suggetions how to find the root cause? It's quite possible the corporate proxy is misconfigured, but I hope you can help me finding the difference between the working Luna and the (for me) broken Mars, so I know what has to be configured differently. Something seems to be changed in the way the packages are downloaded.
Thank you very much!

Install new repository 10g XE

Similar Messages

Maybe you are looking for