Install New SD Card

I'm replacing the 1GB card with a 16 GB card, Whats the easiest way to transfer the data to the new card?
Copy and paste everything via Windows Explorer?
Backup and Restore via Desktop Manager?
Device Switch Wizard via Desktop Manager?
Or something completly different?
Thanks again for any help,
Jamie

Hi again. I have not used AppWorld myself so cannot give you a definitive answer. Perhaps another user can do that. I believe those are archived applications from your prior downloads as you cannot actually run applications from/on the media card. See this kb article: Archiving apps in BB AppWorld
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Similar Messages

Problem with installing new line card 7600-SSC-400

Hi all,
I have a trouble when trying to install new line card 7600-SSC-400 on Cisco 6509. Here was the message displays on the screen after I finished installing the line card : "%C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 7, power not allowed: The image for the card is not bundled in image." I tried to install this line card on another slot, but it doesn't work. The attched item is logfile which I saved in the installing session. I don't know what I hvae to do now, please help me to resolve this problem !
Thanks so much,
Hieu

Hi Hieu,
You might want to run the following to see more detail of the error:
show diagnostic result module all detail
And I would also suggest that you reseat the 7600-SSC-400 line card firmly back to the switch, and check the status again.
If it's still showing the error, maybe you can try seating the module on a different slot, and check if you have the same issue.
If the issue still persist after reseating and testing it on different slot, then it might be a hardware issue, and you might want to open a TAC case to further investigate it.
Hope that helps.

No Signal after installing new graphics card

Hello and thanks in advance for your help!
We have a 2yr old HP p6540y. It has an ATI integrated Video Card. When we recently turned it on, we got a 'no signal' message on the monitor and then it would go to sleep. We have tried several things to fix...listed below, in order, and are still getting the same message. Please advise!
1) No Signal: DVI, VGA, HDMI. So we unplugged and restarted, no change.
2) Checked monitor and DVI & VGA cords with another computer: They all work.
3) Installed new Graphics Card: NVIDIA GEForce GT 610. Still got same 'no signal' message.
4) We plugged/unplugged all other cards/cords/anything we could and cleaned out. Then, finally, the monitor turned on! But not for long....
5) After restarting computer after installation of graphics card driver, we got the 'no signal' message again. We once again, pulled out other cards/plugs and again the monitor/computer came to life.
6) We unistalled the integrated ATI graphic card. When we go to Display, Advanced Options, it lists our new NVIDIA as graphic/display card.
7) We turned computer off overnight and this morning when we turned on, we once agin got the 'no signal' message. We unplugged/plugged computer in several times. Also tried the trick with pulling out cards/plugs and we got nothing. No Signal. After doing this several times (about 10), it finally worked again.
8) We changed sleep settings to: Screensaver=Never; Sleep Mode=Never.
9) We restarted again to once again get no signal message.
So...what do we need to do?
Thanks so much!
This question was solved.
View Solution.

Triusa, welcome to the forum.
I suspect that your problem is caused by the power supply unit (PSU). Here is a guide to help you troubleshoot the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06788&lc=en&dlc=en&cc=us&product=502610&rule=...
Also, the existing PSU is 250W. The GT 610 requires a minimum of 300W.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

3000 j115 A11 stopped working after installing new graphics card

I thought i would be slick and install a new graphics card (asus GEForce 8500GT) after i put it in my 3000 j115 A11 everything stopped working. I can turn the tower on and it gives two beeps. Nothing displays on the monitor (it doesn't leave powersaving mode). It is also very quiet like it is not even trying to work. Did I just destroy my computer? Is there anything I can do?
PS. I did take the asus card back out, so I'm not that lucky
PSS. Got back to being able to boot but now I can't get back into bios to switch from PCI back to original built in card. If I try it just hangs after pressing enter to interupt normal setup
Message Edited by Lazlo420 on 06-27-2009 12:05 PM
Note from Moderator: Gave it a more descriptive subject.
Message Edited by JaneL on 06-28-2009 01:36 PM

I find this thread very interesting. I am assuming this system (3000 j115 A11) is the same as one I mentioned in a post from June 12 (7387A11... Graphics upgradeable?).... and is still hanging out there. Perhaps if Lenovo, or anybody else for that matter, could/would provide SPECIFIC upgrade instructions we could all be enlightened. (In my case I do not own a Lenovo computer but I am hoping to help my sister-in-law with her Lenovo and don't look forward to a major meltdown if the systems are not capable of this, otherwise, simple upgrade.)
Niether of the 2 previous posters mentioned if they upgraded the PS in thier respective systems prior to the graphics card installation (although ala17 "recently" did.). One had issues and the other didn't. If that should be the first step toward the upgrade, it would be helpful to know beforehand.
Thanks and good luck. Post back if you get to the bottom of it.

How to install new graphics card

Hi everyone. I have an intel mac pro and i want to install my pci express ati xtx 1900 card into it. It fits in the slot nice and snug but requires the 6 pin power cable to run the card. I have no idea where this is inside the mac and need help getting my new graphics card to work. i know this card works on a mac so how to i do this. please, please someone help. thank you

If you click on the "manuals" from the small strip above, then click on Desktop -> Mac Pro ->
http://www.apple.com/support/manuals/macpro/
There is a pdf. You should also have a small booklet that came with the Pro, and I am surprised the card doesn't come from Apple with a guide and photos.

How to install new graphic card?

I would like to try to upgrade my graphic card (currently have a GeForce 7300) to run newer games on my pc, but have never opened the back of a computer before. I was hoping someone might be able to help. Is it as easy as just removing the old card and installing the new one?
I was thinking of replacing it with a Geforce 9500 or 9600. My computer has an AMD 6400 dual processor 2.80 ghz with 2 GBs of RAM so the new graphics card should fit, right?
Much thanks for any thoughts and advice.

Yep just remove and replace. Just make sure its the correct type (AGP, PCI-e, etc) thats already in there.
The instructions with the card are pretty simple.
1. unplug computer and remove all cords.
2. lay computer on table.
3. unscrew case screws and slide cover (side cover or whole cover depending on make) off.
4. lay computer on side so you can see the mother board.
5. touch metal chassis before touching any component.
6. unscrew screw that holds the part of the vid card at the back slots.
7. unplug any cable to the vid card.
8. theres a latch that needs to be unlocked before removing card. unlock it (usually slides to the front of the computer, dont force anything)
9. pull vid card straight out.
install new card in reversed order. Make sure you install the new cards software/drivers according to instructions.
King of the World...

Laptop freezes after installing new ram card.

Hi,
i recently upgraded my ram card on my toshiba c650d laptop. after installing the ram card the laptop began to freeze while in the desktop and then it could be resumed when Alt+Ctrl+Del was pressed.
and the laptop wouldn't wake from the sleep mode....
please help me this is urgent...as for im leaving my home country for studies.
thanks for the help in advance
Malith Ratnayake.

Hello Malith Ratnayake,
After changing the old RAM by the new one, this issue occurs?
If the issue doesn’t occur when you change back to use old ram, I think it is the RAM hardware issue.
Please contact the hardware manufacturer for better support.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Installing New network card on a Cisco Catalyst 6500 VSS mode

Hi All.
I need to install a new network card on Cisco Catalyst 6500 VSS mode, I need to follow any special procedures or is it only insert the new card and the Catalyst automatically recognizes the card?
Thank you So mucho.

Hi,
Just insert the blade and the switch should recognize it. For the 6500 series the blades are hot swap able.
HTH

MS-6714 trying to install new video card

Well, I have done everything I can think of short of sledgehammering my computer into oblivion. Just bought this comp it is a 2.8 celeron using the 6714. Thought I could just stick a new video card in. It recogzines the video card, but will not use it. Even when I disable the on board through the device manager. It just uses generic vga drivers. Any clue how I can get this card to be used?

Hi,
Which 6714 are you using???
Check link:
http://www.msi.com.tw/program/search/ser/SerConProRes.php?keyword=6714&kind=1
Also,
1)have you disabled the ONBOARD graphics in the BIOS???
2)which video card you trying to install and which version of drivers?
3)what PSU do you have and model number?
Every single piece of info you give, shortens the answer/solution time...
Del

INstalling new sound card on HP Pavilion a1029_uk

Hi
Due to the issues raised in my other thread
http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio/Suddenly-no-sound/td-p/607655
I've gone and bought separate sound card (not from HP admittedly) but can't get it to install as the install software keeps crashing.
Could it be that I've not totally got rid of the on board motherboard sound chips (that no longer work) are somehow interfering in the process.
I've tried to do the install both with the and without disabling the on board audio in the BIOS settings (turning this off does seem to remove everything including Sound Manager, volume control etc) but it makes no difference.
Do I need to leave this one but remove sound manager and the device drivers manually and if so, how do I do this as Sound Manager isn't included in the "Add / Remove Software" list.
So the question is: Is it possible to totally remove all systems access to the on board sound set, so I can use a PCI sound card instead.
Technical stuff.
HP Pavilion Model: a1029.uk...
Windows XP (SP3)
(not working) on board sound : Integrated High Definition audio Realtek ALC 880 chipset 8-channels for Full Dolby 5.1/6.1/7.1 surround sound support with Dolby Pro Logic IIx
Trying to install Sweex SC002 5.1 PCI Sound Card
http://www.sweex.com/en/assortiment/sound-vision/sound-cards/SC002/

Just to let everyone know I've solved this one.
It seems part of the new sound cards that hooks around the back of the PC to hold it in place is slightly too short, and/or the wrong shape, so when you put on the plate on my HP Pavillion that holds all the PCI cards in place, this pulls the soundcard slightly out of it's slot, up at the opposite end with the smaller pins so although the computer can detect there's a PCI card there, it can't tell what it is.
If I leave this plate off, and allow the hook around part to hang free, the card works.

Installing new graphics card in hp p7-1155

I have a new EVGA GEFORCE GT730 2GB GDDR5 graphics card and am ready to install it in the above box.
Haggiscat suggested this board thru a previous post on this site. I have printed out the install directions from the hp help so I have the mechanics of how to install this thing. Those directions say to disable the on-board graphics card first, then go into the box and install the new card. My question is: Do I need to do anything else first such as downloading the driver first/delete the old driver first.etc? Also, I have a disc that came with the new card. Do I use that to get the drivers or go to the invidia website? I want this install to go as smoothly as possible so expert help would be appreciated.
I'm not sure how to direct you to the previous post but it's in this section. Take a look for some background.
Thanks
This question was solved.
View Solution.

Hi,
I suggest that your carefully read the instructions published by EVGA. I have multiple EVGA graphics cards and none of the directions ever suggested to uninstall the old video drivers prior to installing the new graphics card. Use the drinver disk that comes with the graphics card after your boot up. The default Windows drivers will work and then you can install the EVGA supplied drivers. EVGA also has a web site that you can obtain later drivers that have been tested by EVGA for your graphics card.
The modern HP motherboards will automatically switch to the discrete graphics card if detected and if it is compatible with the BIOS and motherboard.
The NVIDIA 7xx series graphic cards have been problematic with HP motherboards using a version 7 BIOS. some may work and some may not work.
The reality is that there is no a guarantee that any particular graphics card will work in any particular PC even if the graphics card works in other PCs or even the same or similar model PCs. Know what the return policy is before you buy.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Help with installing new graphics card

Hi I have a 3 year old hpe575a (hp pavillion)
Intel i7 2600, 8gb ram
Orginally had a ati hd radeon 2gb (not sure what model)
in it
after 2 years the radeon finally melted ( always had overheating problems in the australian summer )
so I bought a nvidia gtx630m which had the same connections and power requirements and connections as the radeon
I csnt seem to get it working, despite the card powering up, and loading the splash screen it doesnt go any further, I can get to the network boot screen or the hp splash screen but no further, and I cant find any bios updates for my mptherboard (pegatron) so do I need a new motherboard? The computer works 100% fine without the new graphics card
Should I get a new motherboard. Or graphics card? which would be cheaper? or is there someway to get the current system to work with the new graphics card? thanks -zac

Hi,
The existing card is an "AMD Radeon HD6570 (2 GB)". I don't know how you can fit a Nvidia GTX630M to your machine because this card is for laptop:
     http://www.geforce.com/hardware/notebook-gpus/geforce-gt-630m/specifications
Probably you are talking about the following card:
    http://www.geforce.com/hardware/desktop-gpus/geforce-gt-630/specifications
The card should be able to use 300W PSU on your machine (no need new PSU). My suggestion:
(a) Update BIOS to the latest one, please check, should be "Version7.15 Rev. A" the motherboard is Cleveland
     http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-101150-1&cc=us&dlc=en&lc=en...
(b) Install driver for new card
Hope this helps.
Note: Autumn now but still hot isn't it ?
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installing new SIM card

I've been having service trouble with my iPhone. Randomly, it'll say that i have no service when everyone else, including other iPhone users, have service. I went to a ATT store, and they provided me with a new SIM card and told me to replace my old one and that I'd still have all of my contacts and information since the iPhone backs itself up thru iTunes. I installed the new SIM card and plugged my phone to my computer, and it prompted me to make a new account and purchase the service (which I had already done the first day i got the phone back in december) can anyone help me replace the SIM card without having to pay for a hwhole new account?

i know that it asks if i'm an existing AT&T customer or if im new. I always say that I'm an existing customer and it stills asks me to sign up like I did the first time I got my phone. So do you not remember how you replaced your SIM card without having to purchase a whole new plan?

Installed New VGA Card and Lost Audio

(Please forgive my ignorance or stupidity when it comes to any computer knowledge. In 'Layman's Terms', I am what you would call an idiot when it comes to computers, sorry...)
I just installed MSI VGA Card 'MD512D3', 512MB, DDR3 onto my HP Pavillion a1710n desktop computer that is running Windows 7 and after the installation, the first thing that I noticed was the fact that all of my computer's audio had disappeared. I have been trying to trouble shoot the problem through various forums and I have tried pretty much every single solution that had been given to others with the same sort of problem. But then it occurred to me, why don't I uninstall the new VGA card and run the computer without it like I had been doing before. so I did the uninstallation and immediately, the audio drivers appeared in my Windows update and so now I have audio again on my computer. But my question is this, the audio that I was using prior(and here is one of the times that you will need to forgive my ignorance), I believe they were analog. The best way that I could describe them is that they had the connections to the computer that were color coordinated, i.e. "green" "pink" "blue", etc and I was primarily just using the "green" connection for basic stereo sound(nothing fancy). I just happened to look at the box for the new VGA card and it specifies that it has HDMI Output which, if I am not mistaken, is a digital output that requires a completely different connection. Can someone explain to me(in the most BASIC of terms), if this is, in fact, a digital output that requires a different set of speakers for audio or if I am able to use the 'analog' speakers that I currently have? Now, keep in mind that I would LOVE to just go out and purchase the most expensive and up to date audio products but I am limited by my income...thanks in advance for any information that you are able to provide me...Dan

The card supports Audio via HDMI. If you connect it via HDMI to a screen with speakers or speakers connected to the screen which is connected via HMDI the Nvidia HD audio is used. If Scrren has no speakers Nvidia HD audio can't be used. It should then use the soundcard or onboard sound of your board which the spreakers are connected to.

Installing new graphics card

Hello,
I have an HP Pavillion p6 2160eo PC. I want to install a new graphic card, how is it done? Is it just to install it in a PCI slot and restart the PC or do I have to configure it in some other way?
This PC has intgrated HD graphics,can you please suggest
what kind of Graphic cards I can install to increase the performance!
My son who uses this PC mostly is playing a Minecraft and experience lag from time to time,
especially while he also is hosting a minecraft server!
I also have a HP Pavillion D4895.se. There is a NVIDIA GeForce 88 GTS installed, can you please suggest
what kind of Graphic cards I can install to increase the performance! Is it even worth to upgrade such an old
PC?
Best Reagards Ako4
This question was solved.
View Solution.

Based on the specs for your HP Pavilion p6-2160eo Desktop Computer, this model has 1 PCI Express x16 (Gen2.0), 3 PCI Express x1 (Gen2.0) and, 1 PCI Express Mini Card x1slots. This model also has a 300 watt power supply which will limit your choice of retail graphics unless it is replaced with a more powerfull unit.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Installing new network card...how?

The built in ethernet on my computer does not appear to be working. How do I get the Mac to see a new network card once i plug it into the board? Same for a sound card. I know that the built in sound is bad.
I have extensive knowledge of these processes for a PC, but not at all for a Mac. A PC will automatically detect new hardware, but the Mac doesn't appear to see it.
Thanks for any help.

The built in ethernet on my computer does not appear
to be working. How do I get the Mac to see a new
network card once i plug it into the board? Same for
a sound card.
There aren't a lot of PCI Ethernet cards supported natively in OS X, and even then those that are usually still need a driver installed for them to function. D-Link is the only one I know off-hand that markets a 10/100 card billed as Mac-compatible. A Mac-compatible generic sound card will be even harder to track down.. the only ones I know of are very expensive ones aimed at digital audio production.
-Douggo

Install New SD Card

Similar Messages

Maybe you are looking for