Install new support package

Hi
I installed new portal with sp9 .
I want to install sp 15 for j2ee , portal and cm.
Do i need to install sp 10,11,12,13,14 and then
SP 15 or can i mmediately install sp 15 .
Thank You
Amit Zait

Hi amit,
You can check the SP Stack guide at http://service.sap.com
/nw04 -> Maintanence -> SPS15 -> English help.
You do not need to install all the SPs from 9 to 15, but
there may be some SPs required. If so it will be described
in the guide as "prerequisites"
Regards
Srikishan

Similar Messages

Installing Addon Support package (ST-A/PI)

Hello,
Our Earlywatch report is shouting about needing to upgrade ST-A/PI.
So I've used Maintenance Optimizer to download the package, placed it in EPS/in and un-carred the file.
Then I've then gone to SPAM and tried "Support Package > Load Package > from Application Server"
I've then gone to Display/Define and select component ST-A/PI with the following results:
"No Support Package found for this selection"
I have then tried to Upload from Front End instead of Application Server, with the same results.
I've raised a call with SAP but as usual it's now been 4 days without so much as a change in status so I'm hoping someone on here may have an idea.
Many thanks.

Ok guys, thanks for the replies. I haven't given you enough information.
Let me try fill in some gaps.
The result after I selected Load from App Server is to show me the .PAT file and tell me in the message text that: "OCS file already exists in Inbox. Upload not required"
However, if I select "Display" when "New Support Packages" is selected in SPAM, I see nothing with a note at the bottom stating "No OCS Packages found for this selection"
Maintenance Optimizer seemed to want me to select components I did not want to patch. I had a total of 110 files added to my download basket to download the one file I needed!
That file was titled "Servicetools for other App./Netweaver 04s"
I've already installed the ST-A/PI addon using SAINT. This recommendation is to install Support Package SP02 for ST-A/PI.
The recommendation also appears if I run RTCCTOOL in SA38 as well.
I definitely have the correct permissions to run this and, for the record, I have both the .SAR file and the "uncarred version" sat in EPS/in.
Thanks again.

Pre requisites to install BI support package 18

Hi,
We have nw 2004s system.
I would like to know how do we check the pre requisites to install BI support package 18 .
Regards,
Rakesh

Do I have to check under SAP support packages->SAP support package stacks-->SAP netweaver ??
Thanks,
Rakesh

SPAM--How to cleanup new support packages list

Hi,
When i run SAPM T-code and click on "New Support Packages" ,it diaply
too many packages with status "not imported"..
i need to remove all of them make this empty.
How would i remove them from the list?
Thanks
Ram

Good afternoon, Ram - While in SPAM, you can go to "Environment --> Electronic Parcel Service --> Goto --> Inbox". Then you can put a check mark next to the support packages that you want to delete. This removes the support package from the queue, so if you want it back in you would have to reload the data file and cofile and then in tcode SPAM go to "Support Packages --> Load packages" and either load them again from your desktop or ftp the files to the "/usr/sap/trans" directory and use SAPCAR to unpack them again.
I hope this helps!
Regards,
Blair Towe

Language install and Support Packages

We have installed some new languages in our system and are now re-applying the support packages as required.
In SMLT when re-importing the support packages, a pop-up box with the option to 'Overwrite' or 'Do Not Overwrite' repaired texts comes up. We are debating the pros and cons of these options. There is no list telling us specifically which texts have been repaired so that we can evaluate (ie, a SPAU list).
Does anyone have feedback on which is the preferable option?

HI,
I am facing the same problem and I tried restarting the import.
But the same error occurs again.
Please find the error below:
Error when importing language data
tp message:
A tool used by tp broke down
The tp program was called as follows:
POSTLANGUAGEIMPORT
SAPK-603DFINSAPAPPL
Q18
U6
pf=/usr/sap/trans.Q18/bin/TP_DOMAIN_M36.PFL
-Dpostlanguageimportvector='V'
-Dctc=0
-Dclientcascade=yes
-Dtransdir=/usr/sap/trans.Q18
tp output:
This is tp version 380.07.32 (release 721, unicode enabled)
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter SERIAL is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter SERIAL is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
ERROR: stopping on error 16 during POSTLANGUAGE IMPORT
stopping on error 16 during POSTLANGUAGE IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
This is /usr/sap/Q18/SYS/exe/run/R3trans version 6.24 (release 721 - 23.05.13 - 20:13:04 ).
unicode enabled version
1AETW042 unexpected EOF after "242810271" bytes.
2EETW000 Please contact the SAP support.
exiting ...
/usr/sap/Q18/SYS/exe/run/R3trans finished (0016).
Any help would be much appreciated.
Regards,
Gowtham

How to find and apply new Support Packages?

Hi to everyone.
The system is SAP R/3 Enterprise (may 4.7 ext2?)
The spam version is 6.20/0020
i have to update the support packages, so i went on https://websmp107.sap-ag.de/swdc, but i dont know what SP i have to download.
the situation is (so i have to update all of them?):
SAP_BASIS     620     0059     SAPKB62059
SAP_ABA     620     0058     SAPKA62058
SAP_APPL     470     0018     SAPKH47018
SAP_HR     470     0058     SAPKE47058
EA-IPPE     200     0004     SAPKGPIB04     .
PI     2003_1_470     0002     SAPKIPZH52
PI_BASIS     2003_1_620     0002     SAPKIPYH52
ST-PI     2005_1_620     0002     SAPKITLQG2
EA-HR     200     0015     SAPKGPHB15
LSO     200     0018     SAPK-200PIINLSO

For eg. for 4.6C you have upto 52 in BASIS ,ABAP,and cross application components.
you download 43..44..52 and using SPAM you can upload from front end or you can uncar them on the App.server.
However, during the course of implementing patches, during the SPDD and SPAU phase system gives the option to retain the changes that are made to standard programs / objects / tables etc or to reset the objects to SAP standard objects. It is during these changes only that the functional consultant has to study the program/changes which are done and the impact of the changes.So when you come through this SPDD or SPAU phase you have to make sure from your ABAPers and functional consultants regarding whether to reset all to original or retain the changes.This is crucial otherwise you will impair your business unknowingly.
Click on the info button beside the support pack name and see the dependencies.
The order of applying patches will be BASIS,ABAP,Cross application components,HR etc...
And finally it's not the case that we should go for applying a support pack because it's available at SAP market place.

Cant install new language package on mobile dictio...

Hi,
im trying to install on my 5800 new language(thai)
i have english,hebrew.bulgarian,
when im install the thai language , the software want to remove other language and i need to choose , but i can remove only the hebrew language.
i want to remove the bulgarian, and there is no option to remove it..
i hope there is a solution for this problem..
there is a way to uninstall all the dictionary software and reinstall it with the language that i want to install ?

Hi there!
Regarding your concern in downloading a language package for your phone 5800 XpressMusic, actually it's possible you just have to open the diction ary application on your phone then once it prompts you Only English Language install, install other language? so press yes and it will direct you to the Nokia Website, but if you don't see it press Options inside the mobile dictionary and then look for Language and then you have there the selection download, same thing you'll be routed to the Nokia Website, just select the Language but make sure that the language is being used in your country because if your phone will not support it, you will not be able to use that language you downloaded.
Hope tis' help!
"If you think this post is helpful, please click on the green button"

Hi all - how can i see the history of support package

hi have install new support package .
and now i want to view the history of the sp , where can i see it ?
eyal

Hai,
if you want to see the history of support package for JAVA (Web AS JAVA),
Goto the URL : <b>http://<host name>:<http port of Java stack>/</b> --> select System Information --> Show all components --> it will display all Java SP's that you have deployed in your J2EE engine.
regards,
Gopinathan.

Side effects in SAP BW after support package upload

Hello!
I would like to ask whether do You know any side effects executed by installing of a support package (18 and 19) in SAP BW 3.5. If so, should any preventive steps be taken before, to avoid those errors.
Many thanks
RW

Thank You for Your answer.
What I was looking for were all the activities, that are necessary before uploading of a new support package to avoid possible system errors afterwords. As I read on the forum, there are some errors following the SP upgrade like:
- user can not use some program variants any more
- customer exits show error messages, because some tables from the base are changed
- descriptions of new activities in IMG customizing are missing
etc.
Well it seems, that the only thing the user can do is to upload SP patches in the correct order and with an exeption of the last one released.
RW

Error message ME006 order locked after support package

we went to a new support package this weekend and shortly after we have errors about locked documents error ME006
it is programm RVV50R10C
VL10X
I tried to change the number of tries from 100 to 1000 but had no effect ?
does anybody know how to resolve this ???
kind regards
arthur

Hi
Check SAP Note : 869852
I think it UME is not correctly installed
After upgrading your system to a newer SP, you get one of the following
exceptions when executing the UME WD application:
o java.lang.NoSuchMethodError:
com.sap.security.core.wd.umeuifactory.wdp.I
ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
ring;
Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
ring;Ljava/lang/String;)Z at
com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
Init(MaintainGroupComp.java:787)
In order to avoid this error, perform following steps:
- Open the SDM tool and undeploy all components starting with
"tc/sec/ume/wd/..."
- Go to your downloaded SP archives and find the UMEADMIN*.SDA.
Redeploy it.
Regards
Krishna.

Release BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700

Hi guys,
In SAP note 1238872 the release of new support package has been mentioned (Quote: "Download the BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700 from the SAP Service Marketplace.")
So, can someone tell me, when this Support Package will be released?
(At the moment the last version provided in download area is 6.02)
Kind regards
Markus

Thanks, but my question was not how can I workaround, cause I was able to read that note. (Unfortunatly the workaround solves the problem for the query designer only and the error still persists when executing the query)
However, can some one please tell me, when the Support Package 7.00 will be released?

PAT file not shown in Support package manager

Hi All,
We had to create a custom BAPI to achieve an functionality in our product.
We are doing this for the first time.
As a standard procedure we followed the AAK (Assembly Add On ) toolkit to create the deploy-able.
Finally in the consolidation system we could see the following PAT file created in the out directory.
QA70020777848_0000002.PAT
I copied the file to the in directory of the production SAP server where this needs to be deployed.
I ran the transaction SPAM on the server.
Load packages from Application server
QA70020777848_0000002.PAT SAPK-170COINCOMPANY1 @EB\QUpload Already Occurred@ 0004 OCS file already exists in inbox. Upload not required.
IT decompresses the file properly.
Now the problem occurs ahead.
IF i click on the New Support package nothing is shown visible .
Am i missing any steps here.
Regards
Manoj

Got the solution in fact it's not a solution it's just an awareness on how the disks are available in fail-over cluster manager.
1) All the available disks are shown in fail-over cluster manager "storage".
2) While installation it asks us to add available disks for SQL Server then add accordingly. (Ex: E:drive for data files and L:drive for Log files)
3) Once the installation is done you see those disks in MSSQL (SQL Server) group.
Means when you click on Active node it should show you MSSQL (SQL Server) group in which you can find network name, network ip, E: & L: Drives, SQL Server and Agent services.
Note: MSDTC and Quorum are also clustered disks which can reside (Preferably Active Node) in any of the nodes but automatically fail-overs to active node in case of any passive node failures.
Regards,
Kalyan
Grateful to your time and support. Regards, Shiva

Support Package Apply

hi,
   To get the TDS certificate in a new format (funvtionality) we have to apply new support package.
   My system is ECC-6.0 & SPAM/SAINT version is 7.00/0023.
   So i applied SPAM/SAINT 7.00/0034. & it was succesed & after that when appply Basis SAPKB70012
   it was succesfully by when i again execute T-code SPAM it is showing Error in ABAP_GENRATION
Can anybody suggest me.
Thanks in advance
Regards
Manoj

hi,
   thanks for respons. i went to SE38-->RSSPAM10 i got this report
                                SPAM                                   SAINT
     Name       Update        Test      Standard     Downt.min.        Test      Standard     Downt.min.
1 PROLOGUE         X         X         X         X         X         X         X
2 CHECK_REQUIREMENTS         X         X         X         X         X         X         X
3 DISASSEMBLE         X         X         X         X         X         X         X
4 CREATE_COMPONENTS                             X         X         X
5 ADD_TO_BUFFER         X         X         X         X         X         X         X
6 MODIFY_BUFFER         X         X         X         X         X         X         X
7 ADD_SYNCMARKS                                  X         X
8 IMPORT_OBJECT_LIST         X         X         X         X         X         X         X
9 OBJECTS_LOCKED_?         X         X         X         X         X         X         X
10 TEST_IMPORT         X         X         X         X         X         X         X
11 ADDON_CONFLICTS_?              X         X         X         X         X         X
12 OPTIMIZE_OBJLISTS
13 SCHEDULE_RDDIMPDP         X              X         X              X         X
14 CREATE_VERS_BEFORE                   X         X              X         X
15 SPDD_SPAU_CHECK              X         X         X         X         X         X
16 DDIC_IMPORT                   X         X              X         X
17 AUTO_MOD_SPDD                   X         X              X         X
18 RUN_SPDD_?                   X         X              X         X
19 LOCK_EU                        X                   X
20 INACTIVE_IMPORT                        X                   X
21 DDIC_ACTIVATION                   X         X              X         X
22 IMPORT_PROPER         X              X         X              X         X
23 PREPARE_XPRA                   X         X              X         X
24 UNLOCK_EU                        X                   X
25 AUTO_MOD_SPAU                   X         X              X         X
26 XPRA_EXECUTION                   X         X              X         X
27 ABAP_GENERATION                   X         X              X         X
28 RUN_SPAU_?              X         X         X         X         X         X
29 CLEAR_OLD_REPORTS                        X                   X
30 EPILOGUE         X         X         X         X         X         X         X

Import support package

Hi,
I need import package KH60014.SAR. How to import it? I performed unpack this package in /usr/sap/trans directory. After that, I use SPAM t-code. But I can't go to menu option Support Package->Load Packages->From Application Server. Menu "From Application Server" disabled. When I click "display/Change", it appear "OCS package Queue is empty" on status bar.
Please help me!
Thanks
Duypm

As suggested before: Create a new user in client 000 and log on with it before running SPAM/SAINT !
The package KH60014 might have a prerequisite which is not in place.
In transaction SPAM, Mark "New Support Packages" and press "Display".
The new package should appear in the list and you can see if the package has any prerequisite sets.
If you can not find the package iin this way,
you can check if the parameters DIR_TRANS and DIR_EPS_ROOT are correct.
Start transaction SE38, enter program RSPARAM and press F8 twice
(once to run the program and once at the selection screen).
Check the value for DIR_TRANS and DIR_EPS_ROOT.
If you unpacked the package at /usr/sap/trans, then
DIR_TRANS should have the value /usr/sap/trans and
DIR_EPS_ROOT should have the value /usr/sap/trans/EPS.

MAM Not Working After Applying Support Package

We have been lived with MAM 2.5 with SP16 for almost a year now. We recently applied support package 19 for ABAP and J2EE stacks but MAM stopped working right after that. To fix the problem we had to do the following steps:
1. Disable all SyncBO
2. Regenate all SyncBO
3. Run Replicate Database
4. Enable all SyncBO
5. Delete MAM 2.5 client by WebConsole for all PDA (over 100 devices)
6. Re-Assign MAM 2.5 client back to PDA from WebConsole
My question is do we have to perform those steps above every time we are applying new support package? If it is a case, it's very time consuming because we have to manually perform step 5-6 for every users.
Does anyone have seen or experience this scenario before? Your comment is highly appreciated.
Regards,
Dai Ly

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

Install new support package

Similar Messages

Maybe you are looking for