Install Nexus in Logic Pro 9

Hi. I need to install Nexus AU plugin in logic. However, Logic is running on a raptordisc with not much space. Is there a way to install the Nexus AU on another disc, and still run it on Logic?
Thx in advance!

No. The plugin has to go in *Library/Audio/Plug Ins/Components.* However, it may be possible to install the library that comes with Nexus onto a different disk. Whether you can do that should become clear once you open the installer.
O and if that disk is your startup disk, try to keep at least 20 GB free on it. When the startup disk has too little free space, the whole Mac will become sluggish.

Similar Messages

Old school, has anyone here been able to install and run Logic Pro 9.1 on a dual 1.8 G5 PPC? I know LP9 is not officialy supported on non Intel CPUs, But 9.0.0 and 9. 02 are ok on the G5 PPC as it is universal Binary, while I hear 9.1 wont work

has anyone here been able to install and run Logic Pro 9.1 on a dual 1.8 G5 PPC? I know LP9 is not officialy supported on non Intel CPUs, But 9.0.0 and
9. 02 are ok on the G5 PPC as it is universal Binary, while I hear 9.1 wont work.

ok thanks, that's what I tought,looks like apple machines are only good for two - three years, the software developers are ahead of the hardware to a certain point, love macs but this is forcing us to buy new macs just to keep up with development. There was a time it was the opposite.
By the time we get up on new stuff it's time to change again. Gotta be rich to deal with macs ...LOL

After installing lion os logic pro asks for the serial number but will not accept it

after installing lion os logic pro asks for the serial number but will not accept it

Start Here:
http://support.apple.com/kb/TS2005

Re-install questions for Logic Pro 8

I have recently switched from a G5 to the new Mac Pro. I installed the two hard drives from my G5 into slots 2 and 3 on my Mac Pro. Each is 300GB. Slot 1 is the 320GB hard drive that came with the Mac Pro. My plan is to use the main drive (slot 1) for all other applications, do a clean install on my second 300GB drive (slot 2) and update to Mac OS 10.5, then re-install only Logic Studio on this drive. I use my third hard drive (slot 3) to record audio to. I will probably add another hard drive to slot 4 to use either for virtual instruments (Vienna Strings, Wallander), or use it as backup for my system.
I am a long time Logic user (since 1995) and have been continually updating, my last update being to Logic Studio from Logic Pro 7. I want to avoid any unforeseen issues with re-installing from an update, so I would really appreciate any advice on the best procedure to accomplish this re-install. I also am intending on keeping an alias of Logic Pro 8 on the dock of my main drive to open and use Logic from my second drive, and will store all logic song files on the second drive with the application, and continue to record audio to the third drive, as mentioned above. Any helpful wisdom or suggestions for improvement on this configuration would be great too, but I'm mainly asking for help on Logic Studio re-install.

Happy New Mac
My plan is to use the main drive (slot 1) for all other applications, do a clean install on my second 300GB drive (slot 2) and update to Mac OS 10.5, then re-install only Logic Studio on this drive.
That's fine except that most applications (and certainly Logic) have to be installed on the boot drive, and the library or user library +on that drive+ will contain all library files such as application support, preferences etc.
I use my third hard drive (slot 3) to record audio to
That's where old and new Logic projects should live.
I will probably add another hard drive to slot 4 to use either for virtual instruments
Good idea.
or use it as backup for my system.
I'd suggest an external drive for backups, with a basic system on it in a separate partition, solely used for emergencies. Most of the time it should be 'off' except when actually backing up.
and will store all logic song files on the second drive with the application
Shouldn't they be on your 3rd. drive? All projects, old and new, should live on that, I think.
Also, be aware that if you plan to install Logic 7 (for old projects) re-install this first, before you install Logic 8. You can't do this in the wrong order. This will be on the same boot drive and Logic 8 (and your system).

Anyone else had this issue when installing the downloaded Logic Pro 9 app?

How long does this normally take to install? I purchased the Logic Pro 9 app coming close to 72 hours ago now and every since the iMac has been firstly downloading and now installing the content on its own. What's odd, is that it seems to have been stuck on the same process now for close to 24 hours which is 'Installing Logic Pro & Mainstage Essential Content'
Surely the install doesn't take this long?
My computer specs are:
21.5" iMac: 3.06 GHz Intel Core 2 Duo // 4GB RAM
Logic Pro 9.1.7
Do you think there is a risk of doing a computer restart and interuppting the 'install' - presuming thats what is still happening? The progress bar is moving but there's no estimated time showing on its completion. Ive tried, and i am however able to open Logic Pro and use instruments etc.

Oh dear - it really shouldn't take so long, but of course it depends on your broadband connection. If I remember rightly, the first download of the 'essential content' took about 40 minutes over my cable connection, which is faster and more reliable than ADSL here in the UK, although I don't pay megabucks for the fastest service.
Don't try and load everything at once - one package at a time - and if it appears to have come to a halt, it should resume the download rather than starting over (it did in my experience). You need to keep a pretty regular eye on the download status - setting it to download the entire content and expecting it to have all finished when you go back to it later may be a bit unrealistic.
There aren't any magical solutions to any of this as far as I can see, I'm afraid - if you're really out of luck, you can sign into the App Store and download the .dmg files to a computer with a faster connection, if you have access to such a thing.

How to install Loops into Logic Pro

I've purchased brush loops and MIDI drum beats and would like to insatll them for easy access in Logic. Any tips on best to go about this? IE: audio folders that can be accessed from the llops pane in the MEDIA window...so far I have to navigate around the HD to applications support into AUDIO>APPLE LOOPS>ETC...kind of a go around. THANKS

they were AIFF download....I tried to load them as you mentioned but that doesn't seem to work...they are already there when I use the BROWSER except each time I want to go back I'm required to go through a directory such MAC>LIBRARY>AUDIO>APPLE>APPLE LOOPS>then to loops I want...a little of a go around. While we're on this subject is there a way to get drum MIDI files to play back as drums instaed of a piano....so that sampling a selection would be instantaneous rather than loading the MIDI file onto a track set to a drum generator . Thanks

If I buy Logic pro, how many computers can I install it on?

if I buy Logic pro, how many computers can I install it on? will the spp-store let me download again if get new computer?

The license agreement for the DVD version of Logic is different... and only allows for you to install it on two computers (Specifically one desktop and one laptop) In additiont you are supposed to only actually run Logic on one of them at a time and not both at the same time...
So in your instance, you should, according to your license agreement, remove Logic from your older Macbook in order to install it on your new MacBook Pro....
However, if I were you, I would contact Apple to confirm this as there is some discussion as to if this license agreement is still in force or if Logic, once it is updated via the App Store Update routines in Mountain Lion, then is covered by the App Store agreement which allows unlimited installs of Logic Pro on any computer you own...
It's a very grey area... and there is nothing stopping you from installing Logic on all three Macs except for that license agreement as the physical check that used to be present in Logic Pro, to prevent you using it on more than one Mac at a time, was removed a while back... so read into that, what you will.
Again, to be absolutely sure, legally speaking, contact Apple and ask them for guidance... (and if possible get it in writing from them, if they give you the go ahead to install and use Logic Pro on a third computer)

Yosemite won't allow me to install Logic Pro 9?

Just finished a clean install and upgraded to Yosemite but now getting 'failed' when trying to install Logic Pro 9. I know i need to upgrade Logic but how can i get the upgrade if i can't install from my Logic Pro 9 CD's?

Just finished a clean install and upgraded to Yosemite but now getting 'failed' when trying to install Logic Pro 9. I know i need to upgrade Logic but how can i get the upgrade if i can't install from my Logic Pro 9 CD's?

How long does it takes to install Logic Pro x

Can anyone tell me how long does it takes to install Logic Pro x?

You need to drop the Logic Pro x icon into applications, this will then install onto the machine, once installed click on Logic Pro X icon, application will start to download in a matter of minutes, the blue bar will be visible showing the download progress.
When the application is fully installed you can then download all the additional instruments if required.
HAVE FUN

How can i know my logic pro 9 is for 3 install's?

how can i know my logic pro 9 is for 3 install's?

Logic Pro 9 (the DVD version) can be installed on a notebook and a desktop (2). The Mac App Store products can be installed on all Macs that you own. If you need a volume license (e.g. for a school) you should contact Apple.

Uninstalling Logic Express 7.2 after installing Logic Pro 7.2 Upgrade

hi guys,
my gf just bought me the logic pro 7.2 upgrade from logic express that i use and i have a quick question to ask..
i have installed and updated Logic Pro to 7.2.3 -- what do i do with Logic Express app? do i just drag and drop it to my trash to uninstall it? I want to free up some space on my HD so will Logic Pro now work if i uninstall my Logic Express? If this is the case, then if i remove Logic Express from my HD by dragging the .app file into the trash is it safe to assume i will not delete any folders that will prevent Logic Pro from working?
Thanks!
super excited about upgrade!!!!!
:-DDDDDDDDD
sparco.

Hey Sparco.
I was wondering the same thing, as I've recently done this as well (bought LP after owning LE, that is). I was always wondering whether or not I needed it there, or even GB for that matter. I almost deleted LE/GB, until I realized that the programs themselves aren't taking up that much space. What takes up the most space are the sample libraries, apple loops (at least the non-midi ones), and perhaps some of the plugins. As far as I can tell, Logic Pro will install as a separate app, but it will share all of the file resources with LE and GB, and just add extra stuff on top (like the ES2, Scultpure, etc etc). I don't think you'd be saving all that much space getting rid of LE.
Besides, having LE around means that you don't ALWAYS need the xskey. Perfect for anyone running a laptop.

HELP! Logic Pro Crashes on install

I'm trying to install my new logic pro 7, but i get kernal panic when it starts installing the logic pro sounds, any help would be great.
Thanks.
PowerMac G4 Mac OS X (10.4.5) 1.2Ghz 832Mb Ram

Still, if you are getting a kernel panic, something is wrong. Kernel panics indicate a problem on the OS or hardware level. It's totally different than if the installer simply crashes and leaves a crash report.
As far as the amount remaining, I wouldn't worry about the installer's estimate. But, I'd definitely worry about the kernel panic.
jord

G5 Quad Pro Tools HD 7 System Crashes on Launch of Logic Pro 7. WHY?

Updated to Logic Pro 7.1.1
Program gets to Launching DAE on the startup screen and then unexpectedly quits.
G5 Quad Mac OS X (10.4.8) Pro Tools installed
G5 Quad Mac OS X (10.4.8) Pro Tools installed

Hi,
you have to install at least Logic Pro 7.2 to be compatible with ProTools 7 at all, this version is not backwards compatible with ProTools 6.
http://docs.info.apple.com/article.html?artnum=302969
Logic Pro 7.1.1 is compatible with ProTools 6, but not 7.
http://docs.info.apple.com/article.html?artnum=302757
You will find this kind of information here:
http://www.apple.com/support/logic/
Best,
21th

Logic Pro 10, Garage Band.

Hey guys.
I just did a fresh OSX install on my Macbook.
I have not added the additional content (ie, Garage Band, etc.)
I have yet to re-download logic pro X.
Do I have to have Garage Band installed to use Logic Pro X?
Trying to keep my hard drive clean as possible.
I want to use this machine for multi tracking, nothing else.
Thanks.

Giovanni5000 wrote:
Do I have to have Garage Band installed to use Logic Pro X?
No.

Logic Pro just shuts down

Hi
Has anyone ever encounter this problem where Logic Pro x
Just shuts down with no warning and a window opens saying" report problem " with three options ...send report and so on...
The only thing I can see different is that at the opening of this particular song it says that a file is missing and try to locate file...
And the file in question is a " movie file" which I imported but then removed ....
This was quite a complex song which I had to copy each track and pasted each track into a new project....which works fine...but
Very time consuming.....
If you've had this problem with shutting down let me know how you solved it
Thank you

Rick,
Should I put these two files in the User Library/Preferences?
No.. Just quit Logic Pro...
Delete those two files..
Restart your Mac.. and launch LPX and see if that fixes things...
I did have Logic Pro Studio 9 installed prior to Logic Pro X, but removed it after installing Logic Pro X.
There was no need to do that ..... as they both can happily coexist on the same system. and in fact there are some benefits to keeping LP9 installed (Accessing older projects.. ability to continue using 32bit plugins and so on..)
Did you simply delete the LP9 App or did you use an undelete app to remove it?

Install Nexus in Logic Pro 9

Similar Messages

Maybe you are looking for