Install NW7.0 ABAP Trial SP12 on Windows. how use/unpack these two files
Hello,
I tried to install the NW7.0 ABAP Trial SP12 on Windows XP. The download work properly I hope.
I extracted the part1-file to separate folder.
I have no idea how the second file can be extracted (part2).
So I started the setup and it worked well, but the programm to get the hardware key isn't on in the file system "saplicense.exe".
now my question is how do I have to use these two download files (extract, join together, how?) to get a complete installation source?
Can anybody help me?
Thanx in advance
Hans
Hi Hans,
When you extract the part1 the others are extracted too.
I use the program Winrar and works fine.
What program are you using to extract?
Similar Messages
-
Error Installing SAP Netweaver ABAP Trial version on windows XP
Dear all, I was trying to install SAP NEtweaver 7.01 ABP trial version with MaxDB. DB installed fine but it failed later. Below is the error I am getting in the log file. I don't know what went wrong. I don't see it installed thus I can not uninstall and retry it. I can try uninstalling MaxDB and then use registry cleaner tool and reinstall. I do have oracle and MySQL DB installed on the sam emachine. In the past also I have installed this ABP trial version with ( Oracle and MySQL for BOXI) and integrated it. Now I am not able to do it second time.
Please advice.
================================================
(Oct 20, 2010 11:13:18 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 20, 2010 11:13:18 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Oct 20, 2010 11:13:18 PM), Install, com.installshield.wizard.platform.win32.Win32PPKRegistryServiceImpl, err, java.lang.NullPointerException
STACK_TRACE: 20
java.lang.NullPointerException
at com.installshield.product.service.registry.VPDDef.pack(Unknown Source)
at com.installshield.product.service.registry.VPDDef.getId(Unknown Source)
at com.installshield.product.service.registry.VPDDef.saveParents(Unknown Source)
at com.installshield.product.service.registry.VPDDef.saveParents(Unknown Source)
at com.installshield.product.service.registry.VPDDef.saveSoftwareObjectCache(Unknown Source)
at com.installshield.product.service.registry.PureJavaRegistryServiceImpl.writeVPD(Unknown Source)
at com.installshield.product.service.registry.PureJavaRegistryServiceImpl.finalizeRegistry(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.registry.GenericRegistryService.finalizeRegistry(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.finalizeRegistry(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
===================================================Thanks Faisal, The problem is that I don't have window image CD or anything. I bought server online from rackspace and could install ABAP trial without any issue. Last time I tried to install on windows server 2003 from Amazon and it did not work. I think that was the latest version. I installed 7.01 version.
Its working great though I have issue creating user in client 001.
thanks, -
Error installing 7.01 ABAP trial version, during step "start instance"
Hi,
I have installed 7.01 ABAP trial version on WINDOWS VISTA.
During the step 24/27 "start instance" I have this error:
INFO 2009-10-05 03:17:19.165
Disconnect from message server (PC-Andre/3900) succeeded.
INFO 2009-10-05 03:17:19.181
Connect to message server (PC-Andre/3900) succeeded.
INFO 2009-10-05 03:17:19.181
Disconnect from message server (PC-Andre/3900) succeeded.
INFO 2009-10-05 03:17:19.306
State of instance NSP/DVEBMGS00 changed from ABAP: STARTING to ABAP: STARTING.
WARNING[E] 2009-10-05 03:17:19.321
CJS-30105 Instance NSP/DVEBMGS00 reached state SHUTDOWN after having state STARTING. Giving up.
ERROR 2009-10-05 03:17:19.337
FCO-00011 The step start with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
INFO 2009-10-05 08:46:25.193
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start".
Please help me.
Thanks.
AndreaThanks peoplel!!!
The problem was the file "host" :
in the file C:\Winnt\system32\drivers\etc\hosts enter:
<permanent IP address> <host name>
For example:
10.10.0.10 yourhost
I was forget to change it.
Bye!!!
Edited by: zerofolle on Oct 6, 2009 12:24 AM -
SAP NW7.01 ABAP Trial version installation error on windows 7
I m trying to install SAP NW7.01 ABAP Trial version on my PC having Windows 7 in it. Firstly i have configured MS Loopback Adapter and installed SAP Management Console as describe in Installation guide. Now when i just start to run setup.exe , it just start and giving me " could not utilize start class:com,installshield.wizard.Wizard " error. i thought it is because of somewhat java.
Then i have set Environment variable--> PATH as C:\j2sdk1.4.2_19\bin and again try. but doesnt work. Plz help me what to do?? Is this error regarding any java problem or any other??
Currently i have installed this java versions for this.
Java 2 Runtime environment 1.4.2_19
java 2 SDK 1.4.2_19Hi Aakash,
Firstly, I don't think we need to install MMC separately, this should get installed automatically after the installation
of trial version.
I would suggest downgrading the version of java with j2sdk1.4.2_04 to 08 anything between these two.
And try again.
And is the version that you have downloaded compatible with Windows 7.
That coulbe a problem.
Chk this thread also, SAP on Windows 7 Ultimate
Regards,
Vishnu
Edited by: vishnuarigela on Mar 25, 2010 11:52 AM
Edited by: vishnuarigela on Mar 26, 2010 8:19 AM -
Problem installing NW2004s ABAP Trial version on windows xp pro SP3
Good Day.
I have drawbacks installing Abap Trial SP12. When it comes to 89% ends abruptly.
I set up MS Loopback Adapter. The operating system is Windows XP Professional SP3. 1Gb RAM. Disk Space 50Gb Free.
I have installed thousand and once and presents the same mistake. I have followed the procedure to uninstall the MaxDB, Stop service SAP, Clear Folders installed and clean record with RegCleanTool. And nothing, I am grateful for the help they can give me.
Thank you.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.install(StepWrapperInstallFiles.java:2 68)
at com.installshield.product.service.product.PureJava ProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.getResultForProd uctAction(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(May 27, 2008 7:18:44 PM), Install, com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:18:44 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllUninstallationSteps(StepWrap perInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.uninstall(StepWrapperInstallFiles.java :313)
at com.installshield.product.service.product.PureJava ProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.processActionsFa iled(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Problem solved.
I had installed.
- Windows XP Pro SP3
- Java Runtime 1.6
The uninstall and install the following.
- Windows XP Pro SP2
- Java Runtime 1.5
Thanks. -
SAP NW7.01 ABAP trial version installation on Windows Vista. Error message
Hi gurus,
I am installing SAPNW7.01 ABAP trial version.. getting following Error nessage ..ANy idea?
The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
I have WINDOWS VISTA with 32bit..I read in document for SAPNW7.01 ABAP trial vesrion, it can be installed on windows vista also..
Any one has any idea? I suspect it is error bcz of Java files..but I am not sure..
Thanks in advance..Hi Sanjeeva,
At first see where java is installed i.e JDK directory, as per as my knowledge it will be in WINDOWS directory like C drive.
For setting environmental variable (i.e JAVA_HOME,PATH), please follow the below link
http://www.astahost.com/info.php/Change-Windows-User-Environment-Variables_t19560.html
Thanks
Debdeep -
Problem installing NW2004s ABAP Trial version on windows vista business
Hi Gurus,
I am trying to install NW04s Abap trial version on Windows vista Business edition when I click on installer it's giving error "Precondition failed" . I wonder If we can install NW04s on win vista business edition.What version will work on vista business edition.
Please guide me how to install R/3 and BW on my PC which has windows vista business edition installed on it.
I would appreciate If anyone can help me out in this problem.
Thanks,
satHi Sat
As far as i know presently vista does not support NW04s.But in future the NewYork version of netweaver will be supported by vista.
Reward poinst if usefull -
Installation error while installing SAP NetWeaver ABAP Trial Verion 7.02
Hello,
I am getting the following installation error while installing SAP NetWeaver ABAP Trial Version 7.02 (90 days evaluation)
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDBRuntimeForSAPAS_install_ _ .log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Below are the details of my system:
OS: Windows 7 Enterprise Edition (version 6.1.7600)
Processor: Intel(R) Core(TM) i5
System: 64-bit Operating System
Regards,
Tarunhello,
I am getting the below error while intsatlling
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed: Unable to create node
cyber7be\sapmnt\ with type DIRECTORY: can't create parent node...). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
os--windows xp-sp3. 32 bit
please help
thanks in advance
Edited by: sumzi_ks on Aug 27, 2011 4:09 AM -
Error Install SAP Netweaver ABAP Trial Version 7.01
Hello everyone,
I'm trying to install SAP Netweaver ABAP Trial Version 7.01.
My operating system is Windows XP Professional.
I have 3 GB of RAM and 80 GB of free space.
Unfortunately, the installation process is stuck in:
Phase 18 of 27
Import Monitor jobs: running 3, waiting 20, completed 5, failed 0, total 28.
In log files there is no error.
However, after 3 hours the installation stops.
Can anyone help please?
Regards,
VivianeHi all,
Unfortunately I don't have this directory after the error of installation.
I have the following directories:
C: \ usr \ sap \ NSP \ DVEBMGS00
C: \ usr \ sap \ NSP \ SYS
C: \ usr \ sap \ NSP \ tmp
NSP = SID
I looked for errors in the log files but not found. Below is the log file import_monitor.log
INFO: 2010-03-16 21:05:31
Import Monitor is started.
CONFIG: 2010-03-16 21:05:31
Application options:
dbCodepage=4103
dbType=ADA
extFiles=no
importDirs=C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP2;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP3
installDir=C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL
jobNum=3
loadArgs=-nolog -c 50000
monitorTimeout=30
orderBy=
r3loadExe=C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2010-03-16 21:05:31
List of packages with table structure: 'SAP0000'.
CONFIG: 2010-03-16 21:05:31
List of packages with views: 'SAPVIEW'.
TRACE: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
INFO: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2010-03-16 21:05:32
Data codepage 4103 is determined using TOC file 'C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'REPOSRC' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\REPOSRC.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" REPOSRC.TSK ADA -l REPOSRC.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'DOKCLU' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\DOKCLU.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" DOKCLU.TSK ADA -l DOKCLU.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_1' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SAPSSEXC_1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SAPSSEXC_1.TSK ADA -l SAPSSEXC_1.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'DOKCLU' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -nolog -c 50000
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'REPOSRC' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 50000
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000
INFO: 2010-03-16 21:15:34 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is successfully completed.
TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask run
Loading of 'SMIMCONT1' import package is started.
TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SMIMCONT1' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SMIMCONT1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SMIMCONT1.TSK ADA -l SMIMCONT1.log
TRACE: 2010-03-16 21:16:29 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SMIMCONT1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SMIMCONT1.cmd -dbcodepage 4103 -l SMIMCONT1.log -nolog -c 50000
Below the log file import_monitor.java
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
Below the 'last log file created before the abrupt interruption of the installation:
File name: SMIMCONT1.log -
Problem in Installation about SAP netweaver7.0 abap trial sp12
I tried to install SAPNW 7.0 ABAP Trial SP12 successfully before.
But I uninstall it last Sunday night.
And now I want to install it.
But It has some error and It cannot install completely.
The error log is copied below:
(Nov 13, 2007 11:01:18 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 13, 2007 11:01:18 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/David/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/David/LOCALS1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
Who can Help?Hi David,
I see a 601 error in your post.
Have you checked the troubleshooting guide ?
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37
If you don't get the above link, you should check this post, the link is embedded here.
Troubleshooting Guide for NW2004s ABAP Trial Version
Regards,
Siddhesh -
Problem installing SAPNW7.01 ABAP Trial
hello;
I have a problem installing Netwever SAP (ABAP) trial,during the extraction of DBMax (45%), the first step that goes well but during the instalation when I see a message "please wait the installation lasts 2 hours is" it is almost 1 hours and 30 minutes,
I see a message:
Errors occurred during the installation.
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
C:\sapdb\NSP\log.txt :
(Mar 28, 2009 8:30:12 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Mar 28, 2009 8:30:12 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ADMINI1/CONFIG~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ADMINI1/CONFIG~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
can someone help me to solve this problem:Mr, I think it not a problem with antivirus , because I have try to install sap netweaver in a Virtual PC, which I have no antivirus software installed,I see it an error that tells me to see both text.log files, which are:
you can read my log file which contains more details:
FICHE1 :
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
STDOUT:
Installation of MaxDB Software
STDOUT: *******************************
STDOUT: starting installation Su, Mar 29, 2009 at 22:05:30
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 2
STDOUT: callers working directory: C:/Documents and
Settings/Administrador/Bureau/SAPNW7.01ABAPTrial/image
STDOUT: installer directory: C:/sapdb/NSP/_tempLocation
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory STDOUT: archive directory: C:/sapdb/NSP/_tempLocation
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
MSG: group SDB Operators created
STDOUT:
starting preparing phase of package Base 7.7.04.23 32 bit
STDOUT: -
ACTION: append "sql6" to C:/WINDOWS/system32/drivers/etc/services
ACTION: append "sapdbni72" to C:/WINDOWS/system32/drivers/etc/services
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
return value of installVC80Runtime(): 1
ACTION: make directory "c:/sapdb/data" mode "775"
ACTION: make directory "c:/sapdb/data/config" mode "775"
ERR: cannot set access control list of independent data path: cannot set new acl for c:sapdbdata: Le
mappage entre les noms de compte et les ID de sécurité n'a pas été effectué.
ACTION: make directory "c:/sapdb/data/config/install" mode "755"
ERR: cannot set access control list of install regsitry path: cannot set new acl for
c:sapdbdataconfiginstall: Le mappage entre les noms de compte et les ID de sécurité n'a pas été
effectué.
MSG: InstallRegistry: space check ok: 16030008 kb on C: (31728340 kb total) available
MSG: install registry successfully locked
MSG: InstallRegistry::Log: space check ok: 16030008 kb on C: (31728340 kb total) available
MSG: writing 0 packages
MSG: net install registry size = 63 bytes MSG: wrote install registry (125 bytes)
MSG: InstallRegistry: reserved 1024 kb disk space
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTech": No such file or
directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTechInstallations": No
such file or directory
Can't open registry key "HKEY_LOCAL_MACHINESOFTWARESAPSAP DBTechInstallations": No
such file or directory
STDERR: getInstalledReleasesWin(): wrong version format
getRelease():/pgm/kernel.exe not found
WRN: old DBROOT installation found
0.0.0.0 in "" ignored
MSG: no installation data to migrate
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent data path: c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
ACTION: make directory "C:/sapdb/programs" mode "555"
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBBAS.TGZ"
ACTION: make directory "c:/sapdb/data/wrk" mode "770"
STDOUT:
package Base successfully checked
STDOUT:
starting preparing phase of package SAP Utilities 7.7.04.23 32 bit STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: : c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SAPUTL.TGZ"
STDOUT:
package SAP Utilities successfully checked
STDOUT:
starting preparing phase of package ODBC 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: odbc path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBODBC.TGZ"
STDOUT:
package ODBC successfully checked
STDOUT:
starting preparing phase of package SQLDBC 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBC.TGZ"
STDOUT:
package SQLDBC successfully checked
STDOUT:
starting preparing phase of package MaxDB ADO.NET Driver 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: MaxDB ADO.NET driver path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBADO-SDK.TGZ"
STDOUT:
package MaxDB ADO.NET Driver successfully checked
STDOUT:
starting preparing phase of package JDBC 7.6.05.06
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: java driver path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBJDBC.TGZ"
STDOUT:
package JDBC successfully checked
STDOUT:
starting preparing phase of package Server Utilities 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBUTL.TGZ"
STDOUT:
package Server Utilities successfully checked
STDOUT:
starting preparing phase of package Database Kernel 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dependent path: c:/sapdb/nsp/db
ACTION: make directory "C:/sapdb/NSP/db" mode "555"
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBKRN.TGZ"
STDOUT:
package Database Kernel successfully checked
STDOUT:
starting preparing phase of package Redist Python 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: redist python path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBRDPY.TGZ" STDOUT:
package Redist Python successfully checked
STDOUT:
starting preparing phase of package Loader 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: loader path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBLD.TGZ"
STDOUT:
package Loader successfully checked
STDOUT:
starting preparing phase of package Messages MSG 0.7113
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: messages path: c:/sapdb/programs STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SDBMSG.TGZ"
STDOUT:
package Messages successfully checked
STDOUT:
starting preparing phase of package SQLDBC 76 7.6.04.14 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"
STDOUT:
package SQLDBC 76 successfully checked
STDOUT:
starting preparing phase of package SQLDBC 77 7.7.04.23 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "C:/sapdb/NSP/_tempLocation/SQLDBC77.TGZ"
STDOUT:
package SQLDBC 77 successfully checked
STDOUT: checking filesystem "C:"... free disk space ok
MSG: available = 16026740 kb
MSG: needed = 564355 kb
STDOUT:
starting installation phase of package Base 7.7.04.23 32 bit
STDOUT: - -
NetWeaver 7.0 ABAP Trial SP12 - installation problems
Hi
I have been struggeling a lot with the installation of NetWeaver 7.0 ABAP Trial SP12. I have installed and uninstalled serveral times with no luck - I have used the SAP clean up tool, RegCleaner and deleted SAP entries my self in regedit.
The installation only takes a few minutes now before the installation is complete and it asks me if I would like to start the app server and the SAP management console - when I then choose continue it fails.
Im pretty surprised that the maxdb is not installed - even though that I have uninstalled it before the reinstallation attempts.
I would like to start over from scratz - is it possible somehow (so that the maxdb is installaded again and so on) or is there something else that I should try?
I have tried to do the setup mentioned in the troubleshooting guide (https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37) and searched this forum, but I cannot make it work.
Kind regards,
Torben
<b>D:SAPNSPlog.txt</b>
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Oct 28, 2007 6:40:46 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:46 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
<b>D:SAPNSPhomeinstall.log</b>
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:57
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:58
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _startSystem.cmd,D:SAPNSPSYSexe
un,startSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _stopSystem.cmd,D:SAPNSPSYSexe
un,stopSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd,D:SAPNSPSYSexe
un,strdbsj2ee.cmd)
Reading file D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:00
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: D:SAPNSPDVEBMGS00j2eejdbc (Exist=false)
CONFIGURATION: Old JDBC Path: D:SAPNSPDVEBMGS00j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: D:SAPNSP\_installTempj2eeINSTALLERCOMMONJDBCADA
CONFIGURATION: to : D:SAPNSPDVEBMGS00j2eejdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,D:SAPNSPSYSprofile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,D:SAPNSPSYSprofile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,D:SAPNSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,D:SAPNSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
finished successfully.
Elapsed time: 00:00:02 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:03
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: D:SAPNSPhomestartEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "D:SAPNSPSYSexe
un/sapstartsrv.exe" -r -q -s NSP -n 00 -p D:SAPNSPSYSprofileSTART_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
finished successfully.
Elapsed time: 00:00:10 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:14
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: D:SAPNSPSYSexe
unstartsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: D:SAPNSPhome
Start external command...
| / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
finished successfully.
Elapsed time: 00:00:34 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:50
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: D:SAPNSPSYSexe
unsapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: D:SAPNSPSYSexe
un
Start external command...
28.10.2007 18:39:51
Stop
OK
28.10.2007 18:40:01
StopWait
OK
Process exited with rc: 0
Start external command...
28.10.2007 18:40:23
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
failed. Execution returned: RC=100
Elapsed time: 00:00:33 [HH:mm:ss]
Process exited with rc: 100Hi Klaus
Thanks for your reply.
I should not be nessesary with the loopback adapter in my case - my pc is connected to a network and I can access localhost. However, I have tried with and without loopback adapter.
What I did (for each time I tried to install:
Deleted installshield folder
Uninstalled maxDB
Stoped SAPNSP_00 service
Deleted SAP and SAPDB folder
Ran the SAP reg clean tool
Then I made i reboot, and installed NetWeaver 7.0 ABAP Trial SP12 once again.
In my last case I installed the loopback adapter, rebooted once again and then installed the SP12 trial. When I installated the loopback adapter I assigned ip adresse 10.10.0.10 (and subnet mask 255.255.255.0) to it and added a line (10.10.0.10 NSP) to the hosts file.
But I still get error when installation has finished:
<b>D:\SAP\NSP\log.txt</b>
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Nov 1, 2007 7:09:37 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:37 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
D:\SAP\NSP\home\install.log:
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_startSystem.cmd,d:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,d:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,d:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:47
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: d:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : d:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,d:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,d:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,d:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
finished successfully.
Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:49
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: d:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "d:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p d:\SAP\NSP\SYS\profile\START_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
finished successfully.
Elapsed time: 00:00:11 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:02
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: d:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: d:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
finished successfully.
Elapsed time: 00:00:49 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:52
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: d:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: d:\SAP\NSP\SYS\exe\run
Start external command...
01.11.2007 07:08:52
Stop
OK
01.11.2007 07:08:52
StopWait
OK
Process exited with rc: 0
Start external command...
01.11.2007 07:09:14
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
failed. Execution returned: RC=100
Elapsed time: 00:00:22 [HH:mm:ss]
Process exited with rc: 100
Any ideas how I get it to work?
Thanks and kind regards,
Torben -
Steps to install the Netweaver ABAP Trial version.
Hi all,
Am having the copy of Netweaver ABAP Trial version which is downloaded 6 months back. I tried to install it, the installation is getting failed.
Can you get me the clear steps to install the Netweaver ABAP Trial version.
Am having 2003 Server OS.
Regards,
Dinesh.Read:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
Once the contents are extracted, initiate installation by clicking on start.bat to start the installation overview page. The download package contains a detailed installation guide and information about the evaluation developer license
So what is unclear in that documentation?
Markus -
How do I install a pdf printer driver on my window computer using create pdf
How do I install a pdf printer driver on my window computer using create pdf
http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_adobePDF_desktop_printer
-
Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista
This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!! Here is the contents of log.txt:
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\log.txt for details.
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Faisal,
Thanks for your response to my question. I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB. After installing VirtualDisk I only have 38GB of free space on my hard drive. System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB. Why are more than 50GB required?
If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
Thanks for your help!
Gary
Maybe you are looking for
-
Junior/Entry Level Integration/Software Engineer Position
Junior/Entry Level Integration/Software Engineer Position We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and
-
I got a new email address and I reset the iPod so it already has the new address. I can't seem to change the address on my iPhone5 or iPad. So please help! How do I change the address for my apple ID and icloud on all my devices? I don't want to rese
-
Problems with parameterized mapping in BPM
Hi I am using an RFC lookup in a message mapping. I have declared the parameters/bindings in Message Mapping and Operations Mapping, but when I use the Operations Mapping in a transformation step in my BPM, I am asked for an "import" value. There are
-
Hi is it possible to install and setup a modem with an iPad only, I would appreciate an answer to this question thanks
-
hi all, I am facing many issues installing the RAC 11g database with openfiler and filesystem ocfs2 and ASM plz plz help me out from this issue i was struggling with this from couple of days 1)i have succesfully installed EL 5 on 2 nodes and openfile