Install ODI 10g on 64 bit Windows 2008 server

Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
Edited by: user1137989 on Oct 27, 2010 10:51 PM

If you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
11g comes in 32 and 64 bit version .
32 bit version is
Oracle Data Integrator 11g (11.1.1.3.0)
for Microsoft Windows (x86)
64 bit version is .
Oracle Data Integrator Companion 11g (11.1.1.3.0)
for All Platforms
Hope this helps .

Similar Messages

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

How to develop a plugin for 64-bit windows 2008 server?

I have developed a plugin to open local application from web pages, but the plugin could only run on 32-bit windows and 32-bit and 64-bit windows 7, it couldn't work on 64-bit windows 2008 server. The plugin was compiled by vs2008 studio on 32-bit windows xp. Any instructions or advices, men of genius? Thanks

Hi Gnittala,
Thanks for your reply.
I debug the javascript code in firebug on windows 8 and found that firefox would be not responding while executing "document.body.append(myPlugin)".
My javascript code is below:
function openLocalApp(cmdPath, cmdLine) {
var npMyPlugin = navigator.mimeTypes["application/mozilla-npruntime-scriptable-plugin"];
if (npMyPlugin) {
var myPlugin = document.createElement("embed");
myPlugin.style.visibility = "hidden";
myPlugin.type = "application/mozilla-npruntime-scriptable-plugin";
myPlugin.width = 0;
myPlugin.height = 0;
document.body.appendChild(myPlugin);
myPlugin.foo(cmdPath, cmdLine);
} else {
alert("Failed to create the plugin!");
And firefox plugin's source code copys from the following link:
http://mxr.mozilla.org/seamonkey/source/modules/plugin/samples/npruntime/
Just changed a little.
I know the sample is very old, but newer proper sample couldn't be found. So if you can give me a newer sample, I'll appreciate.
Thanks again.

Installing CF8.0.1 64 on Windows 2008 Serv

Does anyone have a set of instructions on installing CF8.0.1
64bit on Windows 2008 Server. I have tried on and off for the last
two weeks and have made no progress. The install goes great,
however the CF administrator component of the install fails with a
HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
coldfusion installation, however once CF 8.0.1 gets installed IIS7
appears to break. I've read the other thread in the forum and the
suggestions made there don't help or have already been done.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-72626
Error Code 0x800700c1
Most likely causes:
- IIS received the request; however, an internal error
occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
- IIS was not able to access the web.config file for the Web
site or application. This can occur if the NTFS permissions are set
incorrectly.
-IIS was not able to process configuration for the Web site
or application.
-The authenticated user does not have permission to use this
DLL.
-The request is mapped to a managed handler but the .NET
Extensibility Feature is not installed.
Things to try (from the error summary page)
- Ensure that the NTFS permissions for the web.config file
are correct and allow access to the Web server's machine account.
- Check the event logs to see if any additional information
was logged.
- Verify the permissions for the DLL.
- Install the .NET Extensibility feature if the request is
mapped to a managed handler.
- Create a tracing rule to track failed requests for this
HTTP status code.
Adobe in going to expect a $6700 check from me in another
week or so and the damn thing doesn't install to the point where
the demo's will run. Windows 2008 and IIS7 isn't that new and I
can't imagine that the number of people having done this is limited
to the one or two in this forum and that there is no technote avail
to us that have to depend on internet support and published
technotes that can document the installation procedure of CF 8.0.1
64bit on windows 2008.
It's the fourth of July and this is a fine place to be.
Happy 4th everyone!

Please see this link:
http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008

Is owb 11g r2,supported by 64 bit windows 2008 server

is owb 11g ,r2 supported on 64 bit windows 2008 server.
is it true that : OWB 11g,r2 is supported only for 32 bit windows 2008.

There is no 64b client for windows at this time. You can check on Oracle for available downloads.
http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html

Want to move RH Server 8 to 64 bit Windows 2008 Server R2

Can someone please confirm what version of Windows 2008 Server that RoboHelp Server 8 will run on?
The Server Admin group says that they have to replace the server on which RH Server 8 is currently running an end-of-line operating system (Windows 2003).
According to my support person, it would be really good if it could run on 64 bit Windows 2008 Server R2.
FYI -- We're still using RoboHelp 7 with the last patch that allowed it to talk to RH Server 8. If it is really important to convert up to RoboHelp 8, please let me know that as well.
Thanks.

Hi Doug.
I've not heard of any change in the officially supported versions of RoboHelp Server. Sorry.
The RoboColum(n)
@robocolumn
Colum McAndrew

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Crdb_dao.dll error on 64 bit Windows 2008 Server

We are using VS2008 to develop enterprise solutions for our customers. We have recently had support calls from our customers installing our solution on 64 bit WIndows Server 2008 machines reporting errors when displaying embedded Crystal Reports.
The error is "Failed to load database information. Details: The database DLL 'crdb_dao.dll' could not be loaded. Error in file C:\Users........rpt: Failed to load database information"
This error only occurs in the 64 bit environment and only occurs when the report is being passed a datasource at runtime, having been developed using a different source. eg: The report is developed based on an Excel Spreadsheet and then passed a runtime DataTable to populate the report at runtime.
We have setup a test environment and replicated this error. The test machine is using the 64 bit Crystal runtime.
Any help would be appreciated as this issue is getting hot now with more customers using 64 bit environments and over 100 of our reports being affected by this error.
Thanks,
Scott.

Hi Ludek,
Thanks very much for your info and help.
Unfortunately I still haven't been able to resolve this issue.
I have installed the SP.
I have also run the modules utility, which unfortunately does not work on the 64 bit machine.
I did notice in running it on a 32 bit machine that my test report is loading crdb_dao.dll, which is the same dll that the 64 bit machine is trying to load when the error occurs.
I am wondering if it is possible that the 64 bit Crystal runtime does not include this dll because a search of the files on the 64 bit machine fails to find a file by that name.
In actual fact, on further investigation I have now found that the Crystal 64 bit runtime throws this error for any report based on a spreadsheet file, even if that spreadsheet is accessible from the 64 bit machine, so it appears to be a bug in the Crystal 64 bit runtime.
Regards,
Scott.

64 bit Windows 2008 Server showing up as Win32NT

I'm running this code on a windows 2008 server 64 bit and it's displaying Win32NT. I'm sure it's 64 bit windows server. Why would it show up as Win32NT?
string OSVersion = System.Environment.OSVersion.Platform.ToString();
Console.WriteLine("OS Version produced from System.Environment.OSVersion.Platform.ToString(): + " OSVersion);
Console.ReadKey();

I'm running this code on a windows 2008 server 64 bit and it's displaying Win32NT. I'm sure it's 64 bit windows server. Why would it show up as Win32NT?
string OSVersion = System.Environment.OSVersion.Platform.ToString();
Console.WriteLine("OS Version produced from System.Environment.OSVersion.Platform.ToString(): + " OSVersion);
Console.ReadKey();
Use this code instead:
bool is64BitWindows = System.Environment.Is64BitOperatingSystem;
if (is64BitWindows == true)
Console.WriteLine("OS is 64 Bit");
Console.WriteLine("System.Environment.Is64BitOperatingSystem == true");
else
Console.WriteLine("OS is 32 Bit");
Console.WriteLine("System.Environment.Is64BitOperatingSystem == false");
Console.ReadKey();

Oracle obdc driver 32-bit doesn't run on 64-bit windows 2008 server r2

Does anyone know a way to run OBDC driver on windows 2008 server r2?, a way to run the app?

Pl post in the Heterogeneous Connectivity forum (Heterogeneous Connectivity as this forum is meant for issues related to database installs
HTH
Srini

Issue with Installing Oracle 10g R2 on a Windows 2008 Domain Controller

I'm assigned a evaluation task for my company. The task invoke to install oracle in my Domain Controller Server.
I got "ORA-12560: TNS:protocol adapter error" when I installed ORACLE 10g R2 for Win2K8 on my Windows 2008 (a Domain Controller Server). It happened in the create predefined database period.
I tried to google and noted that there are some RUMOS say "We cannot deploy ORACLE on a Domain Controller, It's impossible"
Is this true? Please, Please advise!
Thansk,

This is a link to a same issue
Creating instance oracle 10.2.0.4 on Windows 2008 32bit

Oracle 10g Installation Error on Windows 2008 server

Hi Experts,
I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
Can you please suggest how to handle this error and start the service?
Regards,
Naresh.

Hi All,
Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
I was under the impression that the service has to be started before going for SAP installation.
Thanks all for your replies.
Regards,
Naresh.

Accessing a 32 Bit Oracle 9.2 database from a 64 bit Windows 2008 Server

Hi Guys,
I hope someone might be able to help me I am trying to extract data from our existing oracle 9.2 Database onto our new 64 bbit 2008 server. The problem I seem to be having is that no matter what version of Oracle I try to install I'm not able to see any oracle Drivers in the ODBC\ODBC32 section.
I have tried both the 32 bit Oracle 10g ODAC 10.1.0.4.0 and Oracle 11g ODAC 11.1.0.7.20 with no luck, hopefully some one can point me in the right direction. I don't tthink installing the 64 bit would work as the database is 32 bit is this correct or should I be using the 64 bit.
Thanks in advance
D0n_mac

Hi,
You need to install 64 bit client if you're going to use it with a 64 bit app. You dont need to worry how many bits the server is, the client takes care of that.
Hope it helps,
Greg

Install ODI 10g on 64 bit Windows 2008 server

Similar Messages

Maybe you are looking for