Install OEL 6.4 on 3TB harddisk

Hi Guys,
I'm trying to install fresh OEL 6.4 (64 bit) over my new 3 TB HDD, (though in BIOS it's showing detected and seeing 3000GB, enabled all required options like onchip SATA Type set it to SATA, EFI CD/DVD Boot Option to EFI) but unable install it as getting stuck on 'waiting for hardware to initialize'
I can see starting screen with Oracle Logo and getting 5 options as below,
1) Install or upgrade an existing system
2) Install system with basic video driver
3) Rescue Installed system
4) Boot from local drive
5) Memory test
If I choose 1st option, then DVD loads bootable files but gets stuck on 'waiting for hardware to initialize' and then blank screen with blinking cursor.
I would like to know how to use parted (as it's more than 2.2 TB) command when HDD is new ? or what is other way out to install OEL on 3TB HDD ?
(I've tried on my laptop, and installation gets start without any issue)
yours help would be appreciated.
Thanks,
Manish Nashikkar

The problem is probably your video graphics adapter. I suggest the following:
While the cursor is on option 1 hit the <tab> key then add the parameter " nomodeset" and press <enter> to start the system.
If the above does not work, try option 2.
Note that OEL has changed to Oracle Linux or short OL and is designed for server hardware. Support for Desktop or Laptop computers is limited and requires depends on open source and hardware vendor.

Similar Messages

Problem installing OEL 6.1

I downloaded the 32 bit 6.1 iso and the boot iso. Confirmed the download with md5. The Dow pad was to a Winows 7 laptop. I extracted the zips with the Windows extract tool, and burned the files to cd and DVD with Roxio.
I inserted the boot cd into a Vista desktop with the plan of overwriting Vista with OEL 6.1. The install failed the media check. It said some files were corrupted. I burned another cd with the same result. I think the download was good because of md5 check. It is hard to believe I had 2 bad burns.
Is the Windows extract tool good for the extract? Any ideas?

I have successfully installed OEL 6.1. I used my Boot CD, and ignored the Media Test error messages. I put the DVD ISO on a thumb drive. The installation process on the Boot CD asked where the DVD image was, I gave it the thumb ID, and the install went forward successfully. I did down load and use 7zip, but the extract had the same Media Test failure as before. My equipment is getting old, and maybe my BIOS needs updating. The CD and DVD drives are running before the operating system kicked in. Thanks for the suggestions. I think I lucked into the solution this time.

After installing OEL (Free download) Need additional pluggings

I jus installed OEL (Free download) on my laptop for experimental purposes
Now I need additional "pluggings", or software, in order to compile other
applications. Where can I download additional "pluggings" for OEL??

As Paul said CDs should help and it's the best source. On the other hand, you may use the following website to find some RPMs (software packages):
http://freshrpms.net/
You can also try to download and use packages designed for RHEL.
Although OEL is compatible with RHEL, and RHEL could use most packages of Fedora, if you don't use RPM packages designed for your distro, you would have some package dependency problems.

Installing OEL on pavilion dv7 4054CA failing with kernel panic

I am trying to install OEL 4.8 (5.5 gives errors too but not as details as 4.8 )on pavilion dv7 4054CA I7 4-core/8 thread laptop but the installation terminates shortly with kernel panic. I gathered the below errors from the screen:
kernel panic - not syncing
drivers/acpi/ec.c:162
spin_is_locked on unintiialized spinlock
acpi-0352
acpi-1134
acpi-0691 : *** Error: acpi_ev_ype_dispatch
It looks like a CPU issue. My laptop is brand new and works fine and I want to install Linux on it.
So any one can help on this?
Thanks.

Oracle Linux, like all Linux for Enterprise systems, was developed for server hardware and will most likely have trouble to fully support laptops or desktop PC systems. Even if you get the system installed, you may run into trouble with proper support for laptop power management, touchpad, video and wireless support.
A good alternative to run Oracle Linux, or Enterprise Linux on a Laptop is Oracle Virtualbox. It allows you to install multiple common operating systems without the need to repartition your harddrive or jeopardize your primary operating system. Virtualbox is free. More info can be found here http://www.virtualbox.org. If you would like to use Linux as your primary OS or dual-boot, better consider a desktop Linux system like Fedora, Ubuntu or SUSE office desktop - you will be much happier with it. Please note that Oracle Express will easily install and support desktop Linux, but Oracle RDBMS does only support Enterprise Linux versions and will require special attention to get installed on Linux desktops.
In order to start OEL from your computer and work-around the issue you are experiencing, you might try to specify boot parameters, such as acpi=ht or acpi=off
http://www.cyberciti.biz/tips/10-boot-time-parameters-you-should-know-about-the-linux-kernel.html
Edited by: Markus Waldorf on Oct 1, 2010 3:44 AM

How to detect 3TB harddisk?

Hi guys,
I already searching the forum, but i cant find the related topic. so i make a new topic. sorry if i repost to ask. I already try the msi online support, but i cant submit my question.
I have a 3TB harddisk for secondary drive, but it only detect 2TB. i hear that i must update my bios. my question is which version should i update? im noobs for flashing bios, and this is my first time to try.
my primary is SSD64GB (use for booting windows), My MSI board is P67A-GD65.
here is the information from dxdiag :
Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_rtm.130821-1623)
System Manufacturer: MSI
System Model: MS-7681
BIOS: BIOS Date: 03/07/12 09:34:21 Ver: 04.06.04
Thanks a lot guy for helping

Quote from: Bernhard on 21-July-14, 16:09:27
You will not be able to maintain your current partitions.
Perhaps this will allow you to better understand what needs to be done http://www.mpspartners.com/2013/10/how-to-convert-windows-7-on-mbrbios-to-gptuefi/
This is assuming that your BIOS is fully UEFI compliant.
Yes, I know you have win8 so perhaps you wish to read this document http://www.google.com/url?url=http://www.eightforums.com/attachments/performance-maintenance/30201d1382725326-latest-win-8-1-iso-breaks-system-image-functionality-uefiguide-win-8.docx&rct=j&frm=1&q=&esrc=s&sa=U&ei=K8vMU7KeK-yO7Qb2-ICQDA&ved=0CBoQFjAB&sig2=3jymYselLjon44ZbELy_xQ&usg=AFQjCNH6wemwvr48C642jdRZAo0bKfy0yw
but i think this article is about for a primary harddisk? how if the situation is different, a drive not for booting but only for data? do i must process like the article said?

Help!! accidentally install OSX Tiger into my backup harddisk!!

Help! accidentally install OSX Tiger into my backup harddisk!!
i lost all my backup files, work, my life! i have 2 HDD and one is suppose to be installed onto and the other one is my backup hdd..
what happened is i selected onto the wrong hard-disk...
is there anything i can do to recover back files that i installed over osx?
any suggestion much appreciated

Hi Ma'e, Welcome to Apple Discussions.
Installing OS X should not overwrite your files unless you chose "erase and install". If you chose "Archive and install" look for a folder on the top level of your hard drive called "Previous System".
If you did an "erase and install", If there is any chance of recovery at all your best bet is Prosoft Data Rescue. There is a free trial to see if it can recover what you need. But don't do another process on that drive until you've downloaded and run it. Also, a service that has been recommended but I cannot personally endorse is DriveSavers.
-mj
[email protected]

Installing OEL 4

I am new to Linux and when I installed OEL 4 which was working good.
I am now getting a warning.
No hard drives have been found and to add device drivers for install.
Does any one no what this means ?
I have a seagate 250 GB drive as my master.
I went to rescue mode from my GUI screen F5 linux rescue.
It gives me I don't have any Linux partitions and gives me a shell
-/bin/sh-3.00# <------ what can I do here to find my HD and old linux ??
Thanks

Hi - Looks like I got this working again.
Thanks -

Archboot install cd don't detect my harddisk [solved]

I'm trying to install arch64 on my new computer, but are having some problems. The default install cd doesn't detect my harddisk, since the sata2 chipset used isn't supported in the vanilla kernel. So I've build a new one with a kernel with the mm-patchset, and edited the sata-hook to include all of the i2c-drivers. The appropiate drivers (i2c_viapro and i2c_core) is now automaticly loaded, but no device nodes are created
I fear that the arch-initscript fails to create the nodes for some reason...
This is the hooks I got on the install-cd:
HOOKS="arch-ftp-install arch-bootmessage arch-motd arch-memtest arch-base arch-udev ide scsi sata arch-net arch-raid arch-lvm2 arch-filesystems arch-keymap"
If you have any tips or tricks how to get my harddisk detected, please let me know.

I found a solution to the problem: I just needed to include the sata_via driver on the install, and then it worked! So now i can install!!
I also needed to edit the hook setup while installing, otherwise when installing kernel the driver wasent included when trying to boot after install... A bit tricky, but possible

How to install preinstalled Premiere Elements on new harddisk

About 1 year ago I bought a new Sony VAIO SVE1712C5E in the Sony web shop with a preinstalled version of Adobe Premiere Elements 10. Now I want to install a bigger harddisk. How can I install this Adobe Premiere Elements 10 on the new harddisk? And where do I find my license key for it?

o.linke
Please try the following possible solution
The serial number part
1. Go to the Adobe web site http://www.adobe.com, sign in with your Adobe ID and Password, go to the Search field at the top right of that web page and type in My Products.
2. Follow the My Products link to find your Adobe Premiere Elements 10 product. If you find it, chick on Adobe Premiere Elements 10 to reveal its serial number.
The software part
1. Go to the following web site and download and install the tryout of Premiere Elements 10. During installation insert your purchased serial number.
Be sure to read and carry out carefully the web page's Note: Very Important Instructions" and its click "here" before all else in order to avoid Access Denied.
Photoshop Elements 10 Direct Download Links: Free Trials, Premiere | ProDesignTools
Pre-installed programs do not always come with serial numbers. This type of matter needs to be resolved at the time of purchase of the computer.
You need both installation files as well as the purchased serial number for those files to move forward. Adobe cannot help you on this type of situation.
Your last resort is Sony who probably will not be able to help you unless you have a sales agreement stating your rights.
We will be watching for further developments. I am hoping that the route that I have suggested works.
ATR
What video card/graphics card does your computer use? NVIDIA GeForce?

Having a problem installing OEL 6 64Bit using VirtualBox

I tried posting on the Oracle VM forum but noone replied. Trying here.
Anyone have any ideas?
Just installed VirtualBox 4.2 on my 64bit laptop
I then created a new Virtual Machine with a 60Gbyte harddrive
I then used the Settings to assign the OEL 6 .iso file to the Virtual Machine's CD/DVD
I then click the Start button
I get the startup screens for OEL6 so I know the CD/DVD is seen by the Virtual Machine
I click Install or Upgrade existing system
A bunch of stuff is uncompressed as I'm used to seeing
Eventually I get the Test Media screen, I use the Skip button (the first time I tried this, I did verify the .iso so I know it's good)
I click through the Language and Keyboard setting screens
Then I get the Installation Method screen. I click Local CD/DVD as I assume the .iso is in the Virtual Machine's virtual CD/DVD
When I click the OK button, I get the message The Oracle Linux Server disk was not found in any of our CDROM drives.
I'm perplexed. Any help is appreciated.

Are you using the Boot CD to install the software? It will prompt for the installation media because it does not contain the installation packages. I suggest to check what you are using. To boot and install the system from one and the same DVD you need the standard 6.3 Installation DVD or iso image (V33411-01). When you test the CD/DVD media it will be ejected and you need to restart.

Problem while installing OEL core with nfs

Hello,
I'm trying to set up an minimal Installation of OEL 5
i've got following ks file:
#System language
lang en_US
#Language modules to install
langsupport en_US
#System keyboard
keyboard de-latin1-nodeadkeys
#System mouse
mouse genericwheelps/2
#Sytem timezone
timezone Europe/Berlin
#Root password
rootpw ###################################
#Reboot after installation
reboot
#Install Red Hat Linux instead of upgrade
install
#Install in Text Mode
text
#Use NFS Server
nfs server ###.###.###.### dir /data/yum/DISK-ISO
#System bootloader configuration
bootloader --location=mbr
#Clear the Master Boot Record
zerombr yes
#Partition clearing information
clearpart --all
#Disk partitioning information
part swap size=1024 ondisk=sda
part /tmp fstype "ext3" size=2048 --ondisk=sda
part /var fstype "ext3" size=2048 --ondisk=sda
part / fstype "ext3" size=4096 --ondisk=sda
part /opt fstype "ext3" size=2048 grow ondisk=sda
part /data fstype "ext3" size=4096 --ondisk=sda
#System authorization infomation
auth useshadow enablemd5
#Network information
network bootproto=static ip=###.###.###.### netmask=255.255.255.0 gateway=###.###.###.### nameserver=###.###.###.### hostname=###### --device=eth0
#Firewall configuration
firewall --disabled
#XWindows configuration information
xconfig depth=24 resolution=1024x768 defaultdesktop=KDE monitor="Hitachi CM752"
#Selinux Ã¤ndern
selinux --disabled
#Package install information
%packages
@core
rpm
rpm-libs
yum
kernel
ruby
ruby-libs
device-mapper
e2fsprogs-libs
gdbm
keyutils-libs
krb5-libs
libtermcap
openssl
facter
which
ruby-rdoc
ruby-irb
puppet
augeas-libs
ruby-augeas
ruby-shadow
There should run the minimal os and the puppet client to set up the system by puppet.
While installation i get following Error Message:
You have specified that the group 'core' should be installed. This group does not exist. Would you like to continue or abort your installation?
I Tryed to continue, and it installs a completely other Package group, but i dont know what a Group.
The Group defenition is under DISK-ISO/Server/repodata/comps-rhel5-server-core.xml (the other files are other.xml.gz, repomd.xml, filelists.xml.gz, primary.xml.gz, TRANS.TBL)
Hope You can help me!
The Group core in the XML File Shows (Don't know why, but many latters are crypted (?!)):
<group>
<id>core</id>
<name>Core</name>
<name xml:lang="af">Kern</name>
<name xml:lang="am">áˆ›á‹•áŠ¨áˆ‹á‹Š á‰¦á‰³</name>
<name xml:lang="ar">Ø§Ù„Ù„Ø¨Ù‘</name>
<name xml:lang="as">à¦®à§‚à¦²</name>
<name xml:lang="bal">Ù‡Ø³ØªÚ¯</name>
<name xml:lang="be">ÐŸÐ°Ð´Ð¼ÑƒÑ€Ð°Ðº</name>
<name xml:lang="bg">ÐžÑÐ½Ð¾Ð²Ð°</name>
<name xml:lang="bn">à¦•à§‹à¦° (Core)</name>
<name xml:lang="bn_IN">à¦•à§‹à¦°</name>
<name xml:lang="bs">Jezgra</name>
<name xml:lang="ca">Nucli</name>
<name xml:lang="cs">ZÃ¡klad</name>
<name xml:lang="cy">Craidd</name>
<name xml:lang="da">GrundlÃ¦ggende</name>
<name xml:lang="de">Kern</name>
<name xml:lang="el">Î Ï…ÏÎ®Î½Î±Ï‚</name>
<name xml:lang="en_GB">Core</name>
<name xml:lang="es">NÃºcleo</name>
<name xml:lang="et">Tuum</name>
<name xml:lang="fa">Ø§ØµÙ„</name>
<name xml:lang="fi">Keskeiset</name>
<name xml:lang="fr">Core</name>
<name xml:lang="gl">NÃºcleo</name>
<name xml:lang="gu">àª®à«‚àª³</name>
<name xml:lang="he">×œ×™×‘×”</name>
<name xml:lang="hi">à¤•à¥‹à¤°</name>
<name xml:lang="hr">Jezgra</name>
<name xml:lang="hu">Mag</name>
<name xml:lang="hy">Õ€Õ«Õ´Ö„</name>
<name xml:lang="id">Inti</name>
<name xml:lang="ilo">Bugas</name>
<name xml:lang="is">LÃ¡gmarkskerfi</name>
<name xml:lang="it">Principale</name>
<name xml:lang="ja">ã‚³ã‚¢</name>
<name xml:lang="ka">áƒ‘áƒ˜áƒ áƒ—áƒ•áƒ˜</name>
<name xml:lang="kn">à²…à²‚à²¤à²¸à³à²¸à²¾à²°</name>
<name xml:lang="ko">í•µì‹¬</name>
<name xml:lang="lv">PamatsistÄ“ma</name>
<name xml:lang="mk">ÐžÑÐ½Ð¾Ð²Ð½Ð¸</name>
<name xml:lang="ml">à´•àµ‹à´±àµâ€</name>
<name xml:lang="mr">à¤•à¥‹à¤°</name>
<name xml:lang="ms">Teras</name>
<name xml:lang="nb">Kjerne</name>
<name xml:lang="ne">à¤•à¥‹à¤°</name>
<name xml:lang="nl">Kern</name>
<name xml:lang="no">Kjerne</name>
<name xml:lang="nso">Bogare</name>
<name xml:lang="or">à¬ªàà¬°à¬®à‚à¬–</name>
<name xml:lang="pa">à¨®à©‚à¨²</name>
<name xml:lang="pl">RdzeÅ„</name>
<name xml:lang="pt">NÃºcleo</name>
<name xml:lang="pt_BR">NÃºcleo</name>
<name xml:lang="ro">Nucleu</name>
<name xml:lang="ru">ÐžÑÐ½Ð¾Ð²Ð°</name>
<name xml:lang="si">à¶±à·Šâ€à¶ºà·‚à·Šà¶¨à·’à¶º</name>
<name xml:lang="sk">Jadro</name>
<name xml:lang="sl">Jedro</name>
<name xml:lang="sr">Ð¡Ñ€Ð¶</name>
<name xml:lang="sr@Latn">SrÅ¾</name>
<name xml:lang="sr@latin">SrÅ¾</name>
<name xml:lang="sv">Grund</name>
<name xml:lang="ta">à®•à¯‹à®°à¯</name>
<name xml:lang="te">à°…à°‚à°¤à°°à±à°à°¾à°—à°‚</name>
<name xml:lang="th">à¹à¸à¸™à¸«à¸¥à¸±à¸</name>
<name xml:lang="tr">Ã‡ekirdek</name>
<name xml:lang="uk">ÐžÑÐ½Ð¾Ð²Ð°</name>
<name xml:lang="ur">Ù…Ø±Ú©Ø²</name>
<name xml:lang="vi">LÃµi</name>
<name xml:lang="zh_CN">æ ¸å¿ƒ</name>
<name xml:lang="zh_TW">ä¸»è¦</name>
<name xml:lang="zu">Okuyikhona</name>
<description>Smallest possible installation</description>
<description xml:lang="af">Kleinste moontlike installasie</description>
<description xml:lang="am">á‰µáŠ•áˆ¹ á‹¨áˆšá‰»áˆˆá‹ á‹¨áˆ›áˆµáŒˆá‰£á‰µ áˆ¥áˆ«</description>
<description xml:lang="ar">Ø£ØµØºØ± ØªØ«Ø¨ÙŠØª Ù…ØªØ§Ø</description>
<description xml:lang="as">à¦•à§à¦·à§à¦¦à§à§°à¦¤à¦® à¦¸à¦¾à¦®à§à¦à§±à¦ªà§° à¦¸à¦‚à¦¸à§à¦¥à¦¾à¦ªà¦¨</description>
<description xml:lang="bal">Ù‡ÙˆØ±Ø¯ØªØ±ÛŒÙ† Ù†ØµØ¨ Ù…Ù…Ú©Ù†</description>
<description xml:lang="be">ÐÐ°Ð¹Ð¼ÐµÐ½ÑˆÐ°Ñ Ð· Ð¼Ð°Ð³Ñ‡Ñ‹Ð¼Ñ‹Ñ… ÑƒÑÑ‚Ð°Ð»Ñ‘ÑžÐºÐ°</description>
<description xml:lang="bg">ÐÐ°Ð¹-Ð¼Ð°Ð»ÐºÐ°Ñ‚Ð° Ð²ÑŠÐ·Ð¼Ð¾Ð¶Ð½Ð° Ð¸Ð½ÑÑ‚Ð°Ð»Ð°Ñ†Ð¸Ñ</description>
<description xml:lang="bn">à¦¯à¦¥à¦¾à¦¸à¦®à§à¦à¦¬ à¦¸à¦‚à¦•à§à¦·à¦¿à¦ªà§à¦¤ à¦‡à¦¨à¦¸à§à¦Ÿà¦²à§‡à¦¶à¦¨</description>
<description xml:lang="bn_IN">à¦¨à§à¦¯à§‚à¦¨à¦¤à¦® à¦‡à¦¨à¦¸à§à¦Ÿà¦²à§‡à¦¶à¦¨</description>
<description xml:lang="bs">Najmanja moguÄ‡a instalacija</description>
<description xml:lang="ca">La instalÂ·laciÃ³ mÃ©s petita possible</description>
<description xml:lang="cs">NejmenÅ¡Ã moÅ¾nÃ¡ instalace</description>
<description xml:lang="cy">Arsefydliad lleiaf posib</description>
<description xml:lang="da">Mindst mulige installation</description>
<description xml:lang="de">KleinstmÃ¶gliche Installation</description>
<description xml:lang="el">ÎœÎ¹ÎºÏÏŒÏ„ÎµÏÎ· Î´Ï…Î½Î±Ï„Î® ÎµÎ³ÎºÎ±Ï„Î¬ÏƒÏ„Î±ÏƒÎ·</description>
<description xml:lang="en_GB">Smallest possible installation</description>
<description xml:lang="es">InstalaciÃ³n lo mÃ¡s pequeÃ±a posible</description>
<description xml:lang="et">VÃ¤ikseim vÃµimalik installatsioon</description>
<description xml:lang="fa">Ú©ÙˆÚ†Ú©ØªØ±ÛŒÙ† Ù†ØµØ¨ Ù…Ù…Ú©Ù†</description>
<description xml:lang="fi">Pienin mahdollinen asennus</description>
<description xml:lang="fr">Plus petite installation possible</description>
<description xml:lang="gu">àª¨àª¾àª¨àª¾àª®àª¾àª‚ àª¨àª¾àª¨àª¾ àª¶àª•à«àª¯ àª¸à«àª¥àª¾àªªàª¨à«‹</description>
<description xml:lang="he">×”×ª×§× ×” ×ž×–×¢×¨×™×ª</description>
<description xml:lang="hi">à¤¸à¤¬à¤¸à¥‡ à¤›à¥‹à¤Ÿà¤¾ à¤¸à¤‚à¤à¤¾à¤µà¤¿à¤¤ à¤…à¤§à¤¿à¤·à¥à¤ à¤¾à¤ªà¤¨</description>
<description xml:lang="hr">Najmanja moguÄ‡a instalacija</description>
<description xml:lang="hu">MinimÃ¡lis telepÃtÃ©s</description>
<description xml:lang="hy">Õ“Õ¸Ö„Ö€Õ¡Õ£Õ¸Ö‚ÕµÕ¶ Õ°Õ¶Õ¡Ö€Õ¡Õ¾Õ¸Ö€ Õ¿Õ¥Õ²Õ¡Õ¤Ö€Õ¸Ö‚Õ´</description>
<description xml:lang="id">Instalasi sekecil mungkin</description>
<description xml:lang="is">LÃ¡gmarks uppsetning</description>
<description xml:lang="it">Installazione minima</description>
<description xml:lang="ja">æœ€å°é™ã®ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«</description>
<description xml:lang="ka">áƒ£áƒ›áƒªáƒ˜áƒ áƒ”áƒ¡áƒ˜ áƒ¨áƒ”áƒ¡áƒáƒ«áƒšáƒ áƒ©áƒáƒ“áƒ’áƒ›áƒ</description>
<description xml:lang="kn">à²…à²¤à³à²¯à²²à³à²ªà²¸à²¾à²§à³à²¯ à²…à²¨à³à²¸à³à²¥à²¾à²ªà²¨à³†</description>
<description xml:lang="ko">ê°€ëŠ¥í•œ ìµœì†Œ ì„¤ì¹˜</description>
<description xml:lang="lv">VismazÄkÄ iespÄ“jamÄ instalÄcija</description>
<description xml:lang="mk">ÐÐ°Ñ˜Ð¼Ð°Ð»Ð°Ñ‚Ð° Ð¼Ð¾Ð¶Ð½Ð° Ð¸Ð½ÑÑ‚Ð°Ð»Ð°Ñ†Ð¸Ñ˜Ð°</description>
<description xml:lang="ml">à´¸à´¾à´§àµà´¯à´®à´¾à´¯ à´à´±àµà´±à´µàµà´‚ à´šàµ†à´±à´¿à´¯ à´‡à´¨àµâ€à´¸àµà´±àµà´±à´²àµ‡à´·à´¨àµâ€</description>
<description xml:lang="mr">à¤¸à¤°à¥à¤µà¤¾à¤¤ à¤²à¤¹à¤¾à¤¨ à¤¶à¤•à¥à¤¯ à¤ªà¥à¤°à¤¤à¤¿à¤·à¥à¤ à¤¾à¤ªà¤¨</description>
<description xml:lang="ms">Pemasangan sekecil mungkin</description>
<description xml:lang="nb">Minste mulige installering</description>
<description xml:lang="ne">à¤¸à¤®à¥à¤à¤¾à¤µà¤¿à¤¤ à¤¸à¤¬à¥ˆà¤à¤¨à¥à¤¦à¤¾ à¤¸à¤¾à¤¨à¥‹ à¤¸à¥à¤¥à¤¾à¤ªà¤¨à¤¾</description>
<description xml:lang="nl">Kleinst mogelijke installatie</description>
<description xml:lang="no">Minste mulige installering</description>
<description xml:lang="nso">Go tsenya mo go kgonegago go gonyenyane kudu</description>
<description xml:lang="or">à¬•àà¬·àà¬¦àà¬°à¬¤à¬® à¬¸à¬®àà¬à¬¾à¬¬àà¬¯ à¬¸àà¬¥à¬¾à¬ªà¬¨</description>
<description xml:lang="pa">à¨˜à©±à¨Ÿà©‹-à¨˜à©±à¨Ÿ à¨¸à©°à¨à¨µ à¨‡à©°à¨¸à¨Ÿà¨¾à¨²à©‡à¨¶à¨¨</description>
<description xml:lang="pl">Najmniejsza moÅ¼liwa instalacja</description>
<description xml:lang="pt">A mais pequena instalaÃ§Ã£o possÃvel</description>
<description xml:lang="pt_BR">Menor instalaÃ§Ã£o possÃvel</description>
<description xml:lang="ro">Cea mai micÄƒ instalare posibilÄƒ</description>
<description xml:lang="ru">ÐœÐ¸Ð½Ð¸Ð¼Ð°Ð»ÑŒÐ½Ð¾ Ð²Ð¾Ð·Ð¼Ð¾Ð¶Ð½Ð°Ñ ÑƒÑÑ‚Ð°Ð½Ð¾Ð²ÐºÐ°</description>
<description xml:lang="si">à·ƒà·’à¶¯à·”à¶šà¶½ à·„à·à¶šà·’ à¶‰à¶à·à¶¸ à¶šà·”à¶©à· à·ƒà·Šà¶®à·à¶´à¶±à¶º</description>
<description xml:lang="sk">NajmenÅ¡ia moÅ¾nÃ¡ inÅ¡talÃ¡cia</description>
<description xml:lang="sl">NajmanjÅ¡a moÅ¾na namestitev</description>
<description xml:lang="sr">ÐÐ°Ñ˜Ð¼Ð°ÑšÐ° Ð¼Ð¾Ð³ÑƒÑ›Ð° Ð¸Ð½ÑÑ‚Ð°Ð»Ð°Ñ†Ð¸Ñ˜Ð°</description>
<description xml:lang="sr@Latn">Najmanja moguÄ‡a instalacija</description>
<description xml:lang="sr@latin">Najmanja moguÄ‡a instalacija</description>
<description xml:lang="sv">Minsta mÃ¶jliga installation</description>
<description xml:lang="ta">à®®à®¿à®• à®šà®¿à®±à®¿à®¯ à®¨à®¿à®±à¯à®µà®²à¯</description>
<description xml:lang="te">à°¸à°¾à°§à±à°¯à°®à°—à± à°šà°¿à°¨à±à°¨ à°¸à°‚à°¸à±à°¥à°¾à°ªà°¨</description>
<description xml:lang="th">à¸•à¸´à¸”à¸•à¸±à¹‰à¸‡à¹ƒà¸«à¹‰à¸¡à¸µà¸‚à¸™à¸²à¸”à¹€à¸¥à¹‡à¸à¸—à¸µà¹ˆà¸ªà¸¸à¸”à¸—à¸µà¹ˆà¹€à¸›à¹‡à¸™à¹„à¸›à¹„à¸”à¹‰</description>
<description xml:lang="tr">OlasÄ± en kÃ¼Ã§Ã¼k kurulum</description>
<description xml:lang="uk">ÐœÑ–Ð½Ñ–Ð¼Ð°Ð»ÑŒÐ½Ð¾ Ð¼Ð¾Ð¶Ð»Ð¸Ð²Ðµ Ð²ÑÑ‚Ð°Ð½Ð¾Ð²Ð»ÐµÐ½Ð½Ñ</description>
<description xml:lang="ur">Ú†Ú¾Ùˆ Ù¹ÛŒ Ù…Ù…Ú©Ù† Ø§Ù†Ø³Ù¹Ù„Ù„Ø´Ù† </description>
<description xml:lang="vi">CÃ i Ä‘áº·t nhá» tá»‘i thiá»ƒu</description>
<description xml:lang="zh_CN">æœ€å°å®‰è£…</description>
<description xml:lang="zh_TW">æœ€å°å®‰è£</description>
<description xml:lang="zu">Ukufakwa okuncane</description>
<default>true</default>
<uservisible>false</uservisible>
<packagelist>
<packagereq type="mandatory">authconfig</packagereq>
<packagereq type="mandatory">basesystem</packagereq>
<packagereq type="mandatory">bash</packagereq>
<packagereq type="mandatory">coreutils</packagereq>
<packagereq type="mandatory">cpio</packagereq>
<packagereq type="mandatory">e2fsprogs</packagereq>
<packagereq type="mandatory">ed</packagereq>
<packagereq type="mandatory">file</packagereq>
<packagereq type="mandatory">filesystem</packagereq>
<packagereq type="mandatory">glibc</packagereq>
<packagereq type="mandatory">hdparm</packagereq>
<packagereq type="mandatory">initscripts</packagereq>
<packagereq type="mandatory">iproute</packagereq>
<packagereq type="mandatory">iprutils</packagereq>
<packagereq type="mandatory">iputils</packagereq>
<packagereq type="mandatory">kbd</packagereq>
<packagereq type="mandatory">kudzu</packagereq>
<packagereq type="mandatory">libgcc</packagereq>
<packagereq type="mandatory">libhugetlbfs</packagereq>
<packagereq type="mandatory">libtermcap</packagereq>
<packagereq type="mandatory">mkinitrd</packagereq>
<packagereq type="mandatory">passwd</packagereq>
<packagereq type="mandatory">policycoreutils</packagereq>
<packagereq type="mandatory">prelink</packagereq>
<packagereq type="mandatory">procps</packagereq>
<packagereq type="mandatory">readline</packagereq>
<packagereq type="mandatory">oracle-logos</packagereq>
<packagereq type="mandatory">enterprise-release</packagereq>
<packagereq type="mandatory">enterprise-release-notes</packagereq>
<packagereq type="mandatory">rootfiles</packagereq>
<packagereq type="mandatory">rpm</packagereq>
<packagereq type="mandatory">selinux-policy-targeted</packagereq>
<packagereq type="mandatory">setools</packagereq>
<packagereq type="mandatory">setserial</packagereq>
<packagereq type="mandatory">setup</packagereq>
<packagereq type="mandatory">shadow-utils</packagereq>
<packagereq type="mandatory">sysklogd</packagereq>
<packagereq type="mandatory">SysVinit</packagereq>
<packagereq type="mandatory">termcap</packagereq>
<packagereq type="mandatory">util-linux</packagereq>
<packagereq type="mandatory">vim-minimal</packagereq>
<packagereq type="default">Deployment_Guide-en-US</packagereq>
<packagereq type="default">elilo</packagereq>
<packagereq type="default">gnu-efi</packagereq>
<packagereq type="default">grub</packagereq>
<packagereq type="default">ppc64-utils</packagereq>
<packagereq type="default">s390utils</packagereq>
<packagereq type="default">salinfo</packagereq>
<packagereq type="default">sysfsutils</packagereq>
<packagereq type="default">udftools</packagereq>
<packagereq type="default">yaboot</packagereq>
<packagereq type="optional">ecryptfs-utils</packagereq>
<packagereq type="optional">rsyslog</packagereq>
<packagereq type="optional">sgpio</packagereq>
</packagelist>
</group>

Problem solved.
I had to rebuild the repodata, including the groups file:
createrepo -g groupfilepath repopath
That work.
Edited by: user9086675 on 28.04.2010 09:14 Status : Answerd
Edited by: user9086675 on 28.04.2010 09:14

Install OEL 5.0 as Guset OS in VM Virtual BOX

Hi,
I am using WIN XP SP3 on my laptop(intel core i3 32 bit,2 GB RAM).
I have installed Oracle VM Virtual Box for XP (version 4.0.6).There i want to use OEL as my guest OS and install Oracle 11g R2.
I have never used any VM s/w prior to that,hence i don not have any idea on this.
* I have configured OEL VM,now my question is do i need the original OEL 5.0 ISO images to be downloaded from e-delivery to insatll OEL in VM virtual box.And also do i need the 11g R2 binaries for OEL 5 to insatll it within VM OEL???
Please refer me some doc on step by step installation of OEL as guest in VM vietual box.i am a newbie to this.I dont have any idea on this. *
Thanks.
Edited by: Susmit on Apr 26, 2011 9:04 AM

Hi,
if you don't have any idea google is you best friend.
Ask the question you posted here to google, and you will find a lot of good sites with information on this.
However, there is also a good guide, to setup a RAC in Virtualbox, which might answer most of your questions:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
(Even if you don't intend to install a RAC the steps, till you install the Oracle Software, are the same...).
BTW: Found this via. google ;)
Regards
Sebastian

CS6 does not install on Mac - wrong format of harddisk - any remedy?

Hi there,
I wanted to install CS6 on my MacBook Pro but the installation failed as the format of the harddisk supports Capital/Small letters - "case sensitive".
CS6 declined to install.
Any other way to solve this other than reformatting the drive?

Se http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html

Glibc error when installing OEL 5.8 packages for 10g install

Hi, I have the following errors occurring when installing the pre-requisite packages for a 10g install. I'm following the instructions on
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
file /usr/lib/gconv/libISOIR165.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libJIS.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libJISX0213.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libKSC.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/libexec/getconf/POSIX_V6_ILP32_OFF32 from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/libexec/getconf/POSIX_V6_ILP32_OFFBIG from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/sbin/iconvconfig from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
[root@oravm1 Server]# rpm -Uvh glibc-2.5-81.i86.rpm
I'm not sure what to do as the 10g install complains that the glibc package is not installed as a requirement for the db software install.

yum list glibcLoaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Installed Packages
glibc.i686 2.5-81.el5_8.1 installed
Available Packages
glibc.i386 2.5-81.el5_8.1 el5_latest
Should I really have the i686 version installed?
The 5.8 install includes the i686 version and the i386 version. Perhaps only the i386 version should have been installed. Am I right? If so should I remove the i686 version and how?
yum install glibcLoaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Package glibc-2.5-81.el5_8.1.i686 already installed and latest version
Nothing to do
[root@oravm1 ~]#
Also.....
The install warned that the swap was not lareg enough, I recall something like 2.7GB when I have actually made it 2GB.
And the other things was ....
Checking for shmmax=536870912; found shmmax=33554432
The instructions I followed say nothing of setting this so high.
Edited by: ImiDataMan on Apr 11, 2012 4:49 PM

Macbook pro 13" won't install OS X 10.4 after harddisk erased and dvd will not eject!

After backing up the machine, I took what I thought was the correct installation disk and booted from the CD/DVD. I erased the hard disk using the Disk Utility. Then I tried to reboot to install the original operating system. After several hours I received the message: Cannot install Mac OS X on this machine. The computer was running 10.4.3 before I erased it. I don't understand why the restore to factory settings didn't work. Now I have another problem. The CD/DVD does not eject. Without an operating system on the hard drive, it automatically boots from the CD/DVD and will not eject the boot disk!
What do I do? How do I get the CD/DVD out? How do I find a good disk

Hello, hold the mouse button down while booting up to eject it.
The original Disc would be gray.
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

Install OEL 6.4 on 3TB harddisk

Similar Messages

Maybe you are looking for