Install OEM windows 8 to new hard drive

Hi,
   my X24 comes with windows 8. but the original hard-drive has bad sectors now. I bought a new SSD to replace it. but I wonder how I can get windows 8 installed on the new SSD.  I looked at the back of the laptop, there is no windows 8 key sticker, but just a label saying "windows 8".
regards,
tao

Hi Tao,
Welcome to Lenovo Community!
Have you created the recovery media of Windows 8? If yes, then you can use that to install on your new SSD.
If you have not created the recovery media, then use the below link to create the recovery media.
https://support.lenovo.com/en/documents/ht076024
Windows product key is injected to the system board, you won’t get separate product key for pre-loaded OS, you can use the recovery media to reinstall the OS as this will be pre-activated OS & it won’t prompt you for activation.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • How to install and reconfigure a new hard drive?

    How to install and reconfigure a new hard drive?
    I installed a new hard drive from best buy for my "vintage" MacBook laptop.  When I turned on the laptop and the flashing folder appeared, I need help?
    I looked online for some clues.  I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software.  I tired to partition the drive within disk utility but there was an input/output error.  Should I just plug in my external hard drive and hope everything reboots like magic ?
    Thank you for any help you can give

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Any ideas on how I install Lion on a new hard drive

    Any ideas on how I might install Lion on a new hard drive when I purchased the OS online from Apple prior to my hard drive failing?       I don't have a disk. 

    when you install your new drive, what happens? it should boot into internet recovery and you setup from there.
    does it not do that?
    here is an article about how to force internet recover http://www.cultofmac.com/106669/force-lion-to-start-internet-recovery-on-your-20 11-or-later-mac-os-x-tips/
    here is apple literature about the recovery partition (if you had a hard drive) http://www.apple.com/osx/recovery/
    here is a do it yourself downloader that makes a usb stick the recovery disk. If you have data on the usb drive I would back it up, as this will erase everything else on the thumb drive. http://support.apple.com/kb/DL1433

  • How to install Mac OSX on New Hard Drive (No Disk)

    I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Maverick on there and install it on the new Hard Drive without having the original Disk?

    If your machine is running Mavericks with the old drive, just connect the new one in an external enclosure. Boot to the Recovery partition by holding the Command and R keys at startup. Run Disk Utility to prep the new drive, exit Disk Utility and install Mavericks.
    You could also do the external enclosure and use Carbon Copy Cloner to copy your existing drive to the new one.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1395317179&sr=8-3&keywords=2.5+enclosure

  • Installing Mavericks on a new hard drive...

    Hi
    My hard drive crashed, and I bought a new one today. They told me at best buy I need to download mavericks drivers onto a usb or something. I'm not really sure what they meant so I thought I would ask here. Where do I go to put Mavericks onto a usb to install it on a new hard drive?
    Thanks

    1. If it shipped with 10.7 or newer, you'll need to go through that OS by following the instructions above, and then install Mavericks in the normal way. If it shipped with 10.6.8 or earlier, reload that OS from DVD and then upgrade to Mavericks.
    2. The computer's firmware contains instructions for connecting to the Internet.
    (100250)

  • My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

    My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

    What does "the registration won't let me" mean? If the serial number is rejected, contact support by web chat. for anything else you need to provide proper technical information and actually explain your issue.
    Mylenium

  • Can I install mac on a new hard drive in my windows computer and get rid of windows completely?

    I have a windows desktop computer. Can I install a new hard drive and install ios mavericks on it? In other words, convert my windows desktop to a mac?

    Welcome to Apple Support Communities
    You may be able if your computer meets some requirements and if you don't mind putting your PC in risk, but it's not legal to install OS X on non-Mac computers. See the OS X Terms of Use > http://www.apple.com/legal/sla/docs/OSX109.pdf

  • Installing Os 10 on new hard drive

    How do i install a fresh copy of mac OS 10.. on a new hard drive.. I have the Tiger cd's. I really need to get my mac back up n running.
    Message was edited by: ChinyBwoy

    First prep the drive:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Now proceed with the OS X installation.

  • Installing from DVD to New Hard Drive

    I have recently purchased a MacBook Pro, and a new 500 gig hard drive to use in it. The new hard drive is mounted using a hard drive dock. While attempting to install Snow Leopard on the new hard drive from the MacBook Pro's DVDs, I get the following message:
    "Snow Leopard cannot be installed on this computer."
    Is there any way to install a fresh version of Snow Leopard onto this new hard drive from these DVDs?

    First prep your drive as follows:
    Extended Hard Drive Preparation
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Upon completion quit DU and return to the installer. Complete the OS X installation.

  • Problem Installing XP Pro on New Hard Drive

     
    Hi,
    I 'm trying to install xp pro on a new Hard Drive and, following formatting, a RED slider went across the screen and a message;  re-starting remove any disc from drive 'A' . At that point the screen went blank and hard drive light was lit. I took the xp disc out the CD drive and re-started I now get a screen asking me to shift-tab to display network boot option menu,at which point it is frozen ! Help please
    Pete

    Quote from: Fredrik Åsenius on 25-April-07, 01:09:49
    It shuts down? Doesn't restart?
    What is the difference in environment from the shop and your place?
    Shutting down is normally - still - a sign of the processor turning itself off to protect itself. It's not alive long enough in BIOS, to make you see the temp?
    I doubt you keep the computer in the cupboard, but it should anyway have about 50 cm free space in every direction (except downward of course).
    Fredrik, The difference between home and shop, I keep the PC in a PC stand at ground level. I could improve its position slightly however, it has been sighted there for aroung eighteen months!  The shop guy didn't seem overly concerned by the 49c temp, (he thought the fan was ok) which increased to around 56c with 1.5gb ram installed. When i tried to get into bios I was probably too late hitting delete key has it went to windows scan! After the problems I'd had last week with my original hard drive I didn't want to take any more risk's! Its seems obvious the cpu temp is affected with the extra ram, any ideas?
    Thanks Pete

  • Can not install leopard on a new hard drive

    My hard drive on MACBook Pro crashed, swap it with the same SATA 2.5" 160GB hard drive from my PC.
    Booted with the leopard DVD holding the option (Alt) key, I get two choices to boot from "Windows" hard drive ==even thou it is not Windows, it originally has Linux Ubuntu installed on it== and the other choice "Mac OS X Install DVD" I select to install the Mac OS, assuming I will be able to access the Disk utility and format the new HD, the DVD start spinning Apple Logo appear for two minutes, then it switch to a blue screen where it hang forever, and the DVD stop spinning.
    Any idea how to install leopard on the new HD

    Just get a new hard drive and if you have a Intel Mac, OS X 10.6 disk, it's much better than 10.5, faster too.
    https://discussions.apple.com/message/16276201#16276201

  • I purchased mountain lion from apple but never got a disk. How do I install it on my new hard drive, old hard drive failed and is not recoverable according to Apple and Recovery Specialist?

    I have a mid 2009 MacBook Pro with newly installed SATA HD + SSD, I can get mavericks download free but I can't recover photos, apps, files etc from time machine (1TB Time Capsule), I think I was running lion when I started backing up on it but I had updated to mavericks before the HD Failure. When I tried to transfer info from Time Capsule it says " no volumes detected" or something to that effect. I had mucho info backed up on that capsule. Any help appreciated, please spell it all out for me if you can help, I am not at all tech savvy and desperate to get up and going as I am an online student with a fast approaching deadline for course paper. Thank you in advance :)

    Step 1: Buy a new Hard drive that can be installed in your MacBook Pro later, and an External enclose to place it in for now.
    The MacBook Pro before 2010 can not contain the stand-alone firmware to go to the Internet and get a fresh copy of Mac OS X and install it.
    You will need a working Recovery_HD, or to drop back to a 10.6 DVD (if it will Boot on your Mac).
    There may be a functioning Recovery_HD on your existing Boot Drive. If you were running 10.7.4 or later and Time Machine, there may be a Recovery_HD on the Time Machine Volume.
    To check:
    Hold down the Alt/Option key as you restart. This will slowly draw a gray screen and then add an Icon (over several minutes) for each potentially-bootable volume. If any Recovery_HD shows up, take it, and you will be able to get to Internet Recovery and re-download some version of Mac OS X that can be installed on a new drive.
    It is generally far quicker to set up a new drive and install Mac OS X than to struggle with only the primitive tools available only on a DVD or a Recovery_HD. Once you get any version of Mac OS X running, you can get some work done and attempt to salvage first your data, then your drive (if either will be possible).
    By NOT trying to Boot from and use the possibly-damaged drive, you improve your chances of being able to salvage some files off it, since blocks will not be over-written by running Mac OS X from it.

  • How do I install OS on a new hard drive?

    Recently my hard drive failed (for the second time in two months) and when I turn on my macbook pro, a blinking folder with a question mark appears. I opened up my laptop and a friend's laptop and put his external hard drive into my computer and it booted up fine with his OS, data, etc. From that I figured I could conclude that the hard drive cable was not the issue and rather it was the hard drive itself. Today I bought a new hard drive and installed it but the blinking folder / question mark still appears. So I made a bootable install disc and booted holding C. Doing this gave me a couple options. One of them was to install the operating system (mavericks). I clicked on this option but the only disk that it registered was the CD and there was no hard drive to select to install the OS on. But I went back and went into Disk Utility where I noticed that the hard drive was registering in the side bar. So... any help?
    Thanks!

    You are very welcome.
    When it installs, it will automatically tear off a very small (210MB) partition for EFI Boot loading and another one (650MB) for Recovery_HD. These will normally remain invisible but they are there.
    If you are backing up with Time Machine, versions after 10.7.4 create a Recovery_HD on the Time Machine drive as well, and you can boot from that to do Internet Recovery.

  • Can I install OSX on a new hard drive without a CD?

    I'm receiving a replacement hard drive in the mail in a few days, as my current HDD has failed. Although I don't have an OS X disk. My Macbook is a mid 2012, will I be able to reinstall the OS via OS X Utilities when I get the new hard drive? Or will I need to launch Internet Recovery?

    Your current HD will be removed from the Mac? If it has failed the recovery partition will also be unusable. You will need to use Internet recovery
    OS X: About OS X Recovery - Apple Support scroll down for internet recovery info.
    It will install 10.7 since that shipped with the Mac, upgrade post install to whatever OS you have in your App store account.
    P.S. connect via ethernet to speed the whole process up (WiFi can be much slower).

  • Installing snow leopard on new hard drive - disc not seen or found

    I can't provide too many details right now as my hard drive is out, and I'm trying to reinstall an operating system.
    Problem:  Installed a new hard drive purchased from reputable repair store. Last installation disc I have is OS X Snow Leopard. When I get to the point to choose where to install it, it is not seeing the new hard drive.  I've double checked that the wires/bar connecting the actual hard drive are snug. Could there be another problem? Something to do with Lion? I've read several forums, but to no avail....
    Computer:  Macbook Pro unibody. Probably mid 2009.
    OS X: The last one before Maverick... 10.8.5
    The reason I am putting in a new hard drive is that my computer was having trouble starting up or unexpectedly crashing, although I could do a Safe start or Diagnostic (d).  So, on the old hard drive, I did PRAM reset, and Disk Utility, but could not run the Apple Hardware Test, so I took it in.  There is a little issue with battery not being full, but they did not think that was causing the problem, and that it was probably a hard drive issue.  With the new harddrive... they suggested trying to download an OS from linking to another computer by firewire.... The other computer, (Macbook 2 GHx intel Core 2 Duo, 4 GB 10067 MHZ DDR3, OS 10.8.5) does not have a firewire, but does have thunderport, so I tried doing a Target start to reboot...  but Macbook Pro did not read the 2nd computer (Macbook). Then I found my old Snow Leopard disk and here I am...

    If the repair store installed the drive, I'd take it back and let them make it work. Take your Snow Leopard DVD also.

  • I had to install itunes on a new hard drive and when I synced my ipod it duplicated a bunch of songs, how do I fix this?

    I had to install a new hard drive on my system and download itunes again. When I synced my ipod it duplicated a bunch of songs, how do I fix this problem?

    wait until you reach the limit of five authorized machines. then, once a year, you will be able to deauthorize all machines, following which you can reauthorize those computers you currently use/have access to.
    click here for more information.

Maybe you are looking for