Install of 7.02 upgrade not working... hangs at "configuring installation"

I've tried to update iTunes to 7.02 five times already... Everytime I do it it starts off okay, and then while it's installing it just stops... An hour ago it was at "configuring installation," and it's still there (no movement on the progress bar.) I've never had a problem... EVER... installing an update, so this is really bugging me. Any ideas would be appreciated... HELP!

Did you repair permissions? Try that first.
As a second resort then try the full installer. Not software update. Remove the itunes.pkg file from the library first to make sure things are not getting confused.
I use this protocol for any updates:
1. Download the installer from the downloads area. (for OSX always download the large but complete combo version vs. the delta installer)
2. Repair permissions before.
3. Run the full installer
4. Repair permissions again.
I have never had a software updtae related problem on 3 macs with the OS and iLife applications ever. So it is working for me. Including IT 7.0.2
In a real pinch you might have to move to the next steps - try deleting itunes plist files and retry with the full installer. Remember to go in and redo your preferences which only takes a minute.
Stil no luck, export the playlists to XML files, trash the application, pkg files, plist files and reinstall from scratch.

Similar Messages

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

Hi Rave,
Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version". E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
Any suggestions?

Exchange mail after iOS 8 upgrade not working

exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?

Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server.

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Since installing Yosemite, Airplay with Freebox not working

Since installing Yosemite, Airplay with Freebox not working
With Maverick Airplay working well

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Try deleting the printer and scanner and add them back.
Also try Applications/Image Capture to see if it can find the printer and scanner.

After installing Lion all Adobe products not working will and to slow

After installing Lion all Adobe products not working will and to slow
Like the photoshop is to slow to work on it
Please I need to now what's the problem and how can I solve it
Best regards

Yeah Im at a loss too for what is going On here I Do Audio video Editing On the PC side till Now Just got a Not even 6 mo old Mac book pro Dual core 2.5 Ghz 17 in 160 Gb HD 2 GB Ramm did fresh reinstalled of tiger Patched to 10.4.11 then asked the tech at apple store best way to go for Installing my Adobe CS3.3 Master Suite for windows on Here As I said I did not want to go with Lepord as well as I do not use vista yet on PC side with my audio video Apps Abelton live 7.0 Reason 4 Pro tools 7.4 M powered Avid media Composer 3.0 and everything Adobe Makes now he says 2 ways to go VM fusion Or Parallels He likes the Parallels I go that route I install it realize to make Adobe suite work I have too do a custom Virtual machine with 1.5 GB ramm instead of default 512 MB and I create virtual HD at 60 GB instead of default 32 GB which The first time i Installed the master Collection at the 32 GB setting I think it ran out of disk space on the install so i increased the VM to the current settings went to Adobe to Parallels site and Got updates and windows and apple removal tools and ran them here goes reinstall # 3 it takes about 1 1/2 Hrs then at end give ya the error 19-20 errors and when you go look into the folders in Program files adobe there are no Icon launch files and in your programs tab under adobe suite all you see is 2 icons that do not launch anything ? any help is greatly appreciated new to Macs Like them but a lil discouraged !!!!

Can I restore my system from install discs when DVD is not working?

Can I restore my system from install discs when DVD is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

Problem solved - I posted on the general Tiger Discussions as well.
I had the wrong machine started in Target Firewire mode.
http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

My mac has had refresh and install now my password will not work on the hardrive how do i change this?

my mac has had refresh and install now my password will not work on the hardrive how do i change this?

Boot from your install disk and when you reach the Install screen choose Change Password from the Utilities menu.
Also check this Apple article http://support.apple.com/kb/HT1631

10.5.4 won't install-hangs on Configuring Installation

10.5.4 won't install-hangs on Configuring Installation and I have to force quit the installer. I've tried to wait it out for over an hour, but the progress bar never moves. This is with the Combo Updater. I've also tried using Software Update, but the progress bar for checking for new software stops about 3/4 of the way, and hangs forever. Any advice? Thanks.

Welcome to Apple Discussions.
Unfortunately such problems do occur for some people, not necessarily through any fault on the part of the user. Interruption of an update can cause problems for which there are solutions.
Which update was it?
Go to the Apple icon and select Software Update and see what it recommends if anything. Don't actually instal, rather just quit SU and let us know what the result is.
Secondly, open Disk Utility from the Utilities folder in the Applications folder. Select your hard drive in the LH column then Repair permissions from the lower part on the RH side of the window. It will take about 10mins to complete its task. If there is a list of permissions finishing with a message permissions repaired rerun this to make sure there are no more. See whether the odd behaviour continues.
If it does, insert the original installation dvd and restart holding the C key until the Select your language window appears. Do this & on the next window Select Disk Utility from the Tools menu. Again select your hard drive but this time choose Repair Disk. If there are repairs indicated and they are completed rerun this too to check that no more are needed. When this is finished rerun Repair permissions as well if there were any repairs carried out. Restart the computer normally and see how it all goes.
Neville

When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

Dynamic Configuration not working with Integrated Configuration

Hi All,
Dynamic Configuration works fine in PI 7.3 when Classical Configuration is used. However the same does not work using Integrated Configuration.
Scenario :
SOAP -->SOAP Synchronous scenario in PI 7.3 (Dual Stack).
Trying to save a value from Request mapping using dynamic configuration and use the same in response mapping.
UDF Code :
Request Mapping :
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey Variable = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "Variable1");
conf.put(Variable, a);
Response Mapping :
DynamicConfigurationKey Variable = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "Variable1" );
string1 = conf.get(Variant);
Note : Using Integrated Config(AAE Processing) - Response header does not have DynamicConfiguration header node , but Classical Configuration has that.
Regards,
Parimala
Edited by: ParimalaE on Mar 1, 2012 1:33 PM

For us this is what we had:
This didn't work (getInputParameters is the newer stuff that doesn't work):
DynamicConfiguration dc = (DynamicConfiguration)container.getInputParameters().getValue(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dck = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","TServerLocation");
dc.put(dck,"https://xyz.api-salesforce.com/services/Soap/c/26.0/0DFa00000008jis");
return "";
This works for us(we had to remove getInputParameters):
DynamicConfiguration dc = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dck = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","TServerLocation");
dc.put(dck,"https://xyz.api-salesforce.com/services/Soap/c/26.0/00D3000000001X0");
return "";

10.5.3 hangs on "configuring installation" - any ideas please?

Have a MacBook Pro Core 2 Duo.
Downloaded the 10.5.3 upgrade to Leopard, restarted, (3 times now) and watch the installer hang at "configuring installation".
Any ideas please?

We had the same problem with updating one of our G5s. However, after selecting the install and quit button the computer froze up. Now, we can't get the computer to boot up AT ALL. It hangs at the grey screen with the apple and rotating gear. But nothing after that. I have been successful only once to get it to boot up in safe mode, but can't since then.
These are the things I have tried:
Replaced the internal battery
Tried to start up holding down shift key (safe mode)
Booted up on the eDrive that Tech Tools created and ran all the diagnostics (nothing)
Ran Disk Utility: When verifying permissions it came up with a few errors, but didn't fix any of them. Said that the disk (harddrive) couldn't be "unmounted" therefor couldn't fix anything.
G5, OSX Leopard 10.5.1

Flash Player 10.2.153.1 upgrade not working on 64bit Intel-Mac in Safari 5.0.4

I feel robbed! I want to use my Safari.
The latest upgrade of Flash player does not work.
I don't even remember downloading it, it must've been an automatic update!
I can not play youtube videos nor can I play any games on Facebook.
Who knows what is not working in my Avid!! I have not been working on that lately.
The flash player still works on FireFox, but i have no intention on switching to that.
The first aid has been run a few times.
It will download the free flash player for Intel Mac and it says the install is successful, but it is not there.
I have CS4 and it never bothered or disrupted the free flash player before.
I uninstalled it just in case and nearly lost it! When I tried to reinstall Flash, it said my disc to was blank!
Luckily, a friend in the business of fixing computers was able to get that back! whew.
The flash player from the CS4 is showing up in a folder and will even open when clicked on, but it does nothing. It is version 10.0 r2.
When I go to the place where they say to "see what version of flash you have"
I just get that icon that says to "Get Adobe Flash player".
It down not show the suggested "missing plug-in" pictures.
Yes, I read there is compatibility issues with the 64 bit Mac, but it always worked before!!!
Help!! Please!!

So the Shockwave Flash plugin in FF is Installed and Enabled. That's why Flash Player is working and why you were able to see the Flash Player logo animation. On the other hand, evidently the Shockwave Flash plugin is either not Installed in Safari or if it is it is Disabled. And that is why it's not working and you can't see the Flash Player logo.
Yes, I know Flash Player can be Installed in any supported 64bit OS. Also I thot that the 64bit browser in Mac was the "default" browser and the "Compatibility layer" had to be used. Similiar to the PC IE8 or IE9, switching over to the Compatibility feature in the browser.
Do you need to activate the Compatibility feature? I have had other Mac users tell me that their problem was they were using the 64bit browser and found out they had to use the 32bit browser, so I thot it was something they had to do. I would think if it was automatic they would not have had to "do" anything. But like I said I don't use Mac so can only relate what they tell me.
With Safari on either of the test sites, no Flash Player version was displayed?
Look into the HD/Library/Internet Plug-ins/ directory and see if you have the below two files:
Flash Player.plugin, flashplayer.xpt
After that see if this thread is of any help: http://forums.adobe.com/message/2725949#2725949
Thanks,
eidnolb

Installed new trackpad...not working correctly

Hi,
I just installed a new trackpad and it is not working correctly. The tap to click is not working and it takes extra pressure to even move the tracking arrow. Any ideas?

I have an Apple Magic Trackpad I purchased November 2013. Since upgrading to 10.9 (Maverick) my trackpad will just stop. My current workaround: turn my Magic Mouse back on (I set it aside in favor of the trackpad), and my trackpad comes back to life. I turn off the mouse, and the trackpad continues ... for now.
Strange, and I have no other answers for you.

Install of 7.02 upgrade not working... hangs at "configuring installation"

Similar Messages

Maybe you are looking for