Install of 9201 on Solaris 9

I am getting this same error on install of 9201 on Solaris 9 ; ld is core dumping - I have all of the required packages so I can't figure out why linking is failing, can anybody please give me a fix?!!?
Calling action unixActions2.2.0.6.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName = /opt/oracle/product/plsql/lib/ins_plsql.mk
installTarget = install
undoMakeFileName =
installArguments = ORACLE_HOME=/opt/oracle/product,
/opt/oracle/product/install/make.log
undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk
Exception Severity: 1
*** Cancel Dialog: ***
User selected: Stop installation of all products.
Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk

Hello,
a) Please crosscheck your environment variables and make sure you have access to all binaries/executables.
Ex: make etc.
b) Make sure you OS is patches as per oracle requirements.
<<Message>>
Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk
Indicates that you may not have access to execute make utility.
-Sri

Similar Messages

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Install Oracle 8i on solaris

Hi
I know that we can install Oracle 8i on Solaris 8.
Can we install oracle 8i on Solaris 10 ?
What is the last solaris version that supports installation of Oracle 8i?
Thanx

Metalink Certification Matrix shows that Solaris 9 was the last one.
HTH
RK

Installing spam assassin on solaris 9

I'm getting "optional module missing" message while installing the spam assassin. And I had so much trouble installing any module perl module on solaris. Maybe someone here knows an easy way to install spam assassin on solaris.

use perlgcc
Perl remembers what compiler was used when it was first compiled, and unless you purchase the Sun compiler, you'll be using "gcc". Sun provides you with a version of perl compiled with gcc, so you can do stuff like you're trying to do.....

When trying to install jdk-1_5_0_13 on Solaris geting file is corrupt.

I am trying to install jdk-1_5_0_13 on Solaris 10 using the following downloaded files from Sun Archive site
jdk-1_5_0_13-solaris-sparc.sh and jdk-1_5_0_13-solaris-sparcv9.sh
When tried to install using these self extracting files
It gives error file is corrupt after accepting the licencing agreement. We have already tried after downloading twice and it give the same error.
Please could someone explain
1. Is the set files at the site really corrupt ?
2. Or is there something else, like instructions given at the site are not 100%
3. How to make it work?
Has any one installed jdk_1.5.0_13 recently on Sun Solaris using self extracting files and it worked?
Your help will be higly appreciated.
Thanks
Edited by: SatishKainth on May 1, 2008 4:51 AM

First make sure that you are logged in as "root", or use su [root password] to be logged in as.
And then try all that things again.

Installing Oracle 8i in Solaris Intel Version With Pentium 4

Hi Guys,
I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.

Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
One of my friend have the cd but it already damaged so that i need your help.
My address
S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
My email id: [email protected] or yahoo.com
by chandran.s

Installing Oracle 9i in Solaris 10

Hi
I have a server having OS Solaris 10 SPARC Edition 64 bit. I want to install Oracle 9i client in that server. I have seen in many forums ppl saying that Oracle 9i is not compatible with Solaris 10 and there are some issues related to patches.
Can anyone help me in this matter.
Thanks and Regards
Abhishek Verma

Thanks for your replies guys.
I successfully installed Oracle9i client in Solaris 10. Initially I had to set up the Kernel parameteres as Prajeevan has suggested. Later the installation was quite staright forward and same as for Linux server.
Thanks for giving your precious time for replying to my query.

Installing JDS 3 on Solaris 10 SPARC previously running CDE

Does anyone have experience of installing JDS3 on SPARC architectures? Most of the posts seem to relate to x86. I'm having trouble installing JDS3 from the Solaris 6/06 distribution.
I have a jumpstart config which starts with a SUNWCrnet and adds the minimum to provide a CDE with XDM log in. We thought we'd try JDS3 so I've expanded the profile to include all packages in the Sol10 6/06 distribution which are marked as belonging to the GNOME2 or JDS3 categories.
This gives the option for selecting JDS from the login session menu. The desktop comes up ok but then we get error messages:
'Failed to execute child process "xscreensaver" '
Attempting to start any application from any menu results in the following message:
'Cannot launch entry
Details: Text was empty (or contained only white space)'
I can't even open a terminal.
It looks like a major piece of configuration data is missing but I'm not sure where to start looking.
Any help for an old SPARC head gratefully received.

Xscreensaver needs to have both /usr/openwin/bin and /usr/X11/bin in the user's $PATH. Add the line:
PATH=$PATH:/usr/openwin/bin:/usr/X11/bin
in your .profile and that should do it for you.

Installing JDK1.4 on Solaris

I am having problem in installation of JDK1.4 on Solaris ix86 plateform, when I run the .sh instaltion file its either prompt that the file is corrupted or sometime it is installed successfully without any error but when I run java it gives following error,
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Any help and suggestion will be highly appriciated,
Regards

You may be experiencing a conflict with a previously installed Java - the current Solaris 10 comes with 1.5.0_05, I believe.

Install Nagios agents on Solaris 10 to monitor from RHEL 5

Hi,
Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me.
Thanks
Rao

Hi Sugunakar,
There are a few small things I can think of checking:
I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
Regards,
[email protected]

ORA-27102: out of memory. Faild to install oracle 10gR2 on Solaris 10

Hi, I want to install oracle on my solaris machine. I have 2.5G RAM and more than 5G swap file. But the ORA-27102: out of memory error occurred at installing the Oracle Database Configuration Assistant step(Copying database files Creating and starting Oracle instance).
The only warnings bellow:
Checking kernel parameters
Checking for BIT_SIZE=64; found BIT_SIZE=64. Passed
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
What's the reason and how may I resolve it?
Thanks!

I set some kernel parameters like: set shmsys:shminfo_shmmax=4294967295 and so on. Restart the computer and run dbca+ and configure in advance mode. There's a stage require the size of flash_recover_segment of which the default size number is 2048M. WOW, out of memory on my pc of course.
So I think it's the parameter value during the installation progress bring on the ORA-27102 problem. However, during the first installation, there's no prompt for me to enter the parameter; or I didn't see.

Admin Tool Error while installing C Compiler on Solaris 9 machine.

Hi,
I tried to install C Complier in Solaris 9 Sparc machine(It wasnot installed initially and hence I tried to install) and i got an error message "Admintool :Error ,add software failed"
Can anyone guide me on how to troubleshoot this problem?
Thanks
Bala

Does install from command line work?

Steps to Install Oracle 9i on Solaris 8 X86

I am eager to explore Solaris. As a first step I have installed Solaris 8. Now I need to install Oracel 9i on
Solaris.
I have very less knowledge on Solaris...
Can somebody help out in this.

Unfortunately no chance. 9i was never supported on Solaris x86 and is desupported now on all other platforms. Use 10gR2 instead.
Werner

Can i install flar image of solaris 10 from V890 to v480?

Team,
Please help me for a confusion that can i install flar image of solaris 10 from V890 to v480?
We have very good flar image of solaris 10 and want to install same on other machine.
this machine hosting the Oracle database on it.
Thanks
Ravi

Generally speaking, as long as you are in the same processor family (4u, 4m, 4c, 4v etc) you can do so.
The caveat is that the OS has to support the particular model you are on. No worries with S10 though.

How to install lan card in solaris 11

Hi,
can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
When i do ifconfig -a it only displays loop back driver only
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
The other driver was missing can please some one tell me how to install that?

Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
http://www.oracle.com/webfolder/technetwork/hcl/index.html
There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

Install of 9201 on Solaris 9

Similar Messages

Maybe you are looking for