Install of Data Services as active/passive behind F5 load balancers

I currently have two RedHat 5.5 x86_64 hosts, SAP_DS1 and SAP_DS2, and 1 database, Oracle RAC 11g and 1 F5 LTM load balancer sitting in front of the two hosts. The F5 load balancer VIP is set up as active/passive (fail-over) for the two hosts.
Will I need 2 local databases 1 central database or can I accomplish this with one local database?
Please advise on the recommended method for installing BOBJ DATA SERVICES XI 3.2 on two Linux hosts in an active/passive design.
Thanks

You might have better luck asking this question in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean
P.S. to moderators: can you create a sticky post to this effect?

Similar Messages

  • How to install Flex Data Services 2 on Coldfusion MX 7?

    hello,
    How to install Flex Data Services 2 on Coldfusion MX 7?
    was is tomcat..
    I want to use RemoteObject(CFC) for oracle.
    Thanks for your support.

    Hello -
    To use mx:RemoteObject with CFC you don't even need FDS, you
    can use FlexBuilder 2.0 and use it's internal FDS SDK to build,
    compile and deploy full apps to be used in conjunction with CF 7.02
    (Flex Connectivity)
    Secondly, if you do want to install the full FDS 2.0
    enterprise software you can find the instructions to do so for J2EE
    apps servers here
    http://www.adobe.com/support/documentation/en/flex/2/install.html#flexj2ee
    HTH, Bill

  • DATA GUARD IN ACTIVE PASSIVE OS CLUSTER WINDOWS

    Hello Gurus
    I am setting up data guard in sap on windows with active passive OS clustering.
    Please clear below 3 confusions.
    1)I have same database name and sid of standby database as primary.Now to have different service i am just using it in setting parameters and tns_alias like
    Listener file for primary and standby same as sid same
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (GLOBAL_DBNAME=PROD)
    (ORACLE_HOME=/oracle/product/11.2.0)
    (SID_NAME=PROD)
    tNSNAMES adding entry on primary as
    PROD2
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=TCP)(HOST=dev-db2)
    (port=1521)
    (connect_data=
    (service_name=prod2
    server=dedicated)))
    tnsnames added entry on standby of primary
    PROD
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=TCP)(HOST=dev-db2)
    (port=1521)
    (connect_data=
    (service_name=prod
    server=dedicated)))
    ---->in parameter i am using service for standby as
    alter system set log_archive_dest_2='service=PROD2 async valid_for=(online_logfile,primary_role) db_unique_name=prod2;
    **But i have am not creating any service as such.Will THIS WORK and alright.
    as i am having confusion that my SID is same so how service be differentiated.am i doing right way.
    2)as my primary database having 2 node in OS cluster so like node1 having ip 192.68.2.22  node 2 ip  192.68.2.23..They are in active passive clusten.the datafiles and other oracle files can be shifted to any node as per requirement.So they are using a virtual ip 192.68.2.20.. Now i need to create standby for this primary....standby ip is 192.68.2.40
    So in tnsnames i am giving all ips  the virtual ip 192.68.2.20 and host ips of both nodes on standby tnsnames and on primary adding entry of standby ip 192.68.2.40.Means i am doing entries of virtual ip and host of node1 and node2.
    So i am able to ping the virtual ip from standby but not able to ping 192.68.2.22 and 192.68.2.23.
    So is it fine .Would i be able to create standby database as only virtual will be needed or i am going on wrong path.
    3)Can i just create the standby database by using duplicate command without taking backup in 11g.(means without physical copy of data files etc from primary to standby)
    likewise
    On the primary server, connect to Primary database(ORCL) as target and standby database(ORCL_DTGD) as auxiliary.
    $ rman target sys/sys@ORCL auxiliary sys/sys@ORCL_DTGD
    RMAN>DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE DORECOVER
    SPFILE SET DB_UNIQUE_NAME='ORCL_DTGD' SET LOG_ARCHIVE_DEST_2='service=ORCL LGWR SYNC REGISTER VALID_FOR=(online_logfile,primary_role)' Set STANDBY_FILE_MANAGEMENT='AUTO' SET FAL_SERVER='ORCL' SET FAL_CLIENT='ORCL_DTGD' SET CONTROL_FILES='/data/oracle/app/oracle/oradata/ORCL/control01.ctl’,'/data/oracle/app/oracle/fast_recovery_area/ORCL/control02.ctl’ NOFILENAMECHECK;
    after configuring tns,listener etc
    Regards
    thanks for ur time..please reply as i am really looking for ur great ideas and need them.

    For Question 1:
    The SERVICE attribute, which is a mandatory attribute for a redo transport
    destination, must be the first attribute specified in the attribute list. The SERVICE
    attribute is used to specify the Oracle Net service name used to connect to the redo
    transport destination. The service name must be resolvable through an Oracle Net
    naming method to an Oracle Net connect descriptor that matches the Oracle Net
    listener(s) at the redo transport destination.
    Source - 6.2.2 Configuring an Oracle Database to Send Redo Data
    Concepts and Administration 11g Release 2 (11.2) E10700-02
    For Question 2:
    I would DNS if possible. If you cannot see IP's you can add them the the HOSTs file on most OS's as a work around.
    Not sure what you are trying to do exactly.
    For Question 3:
    Yes.
    Duplicate for Standby using active duplicate.
    Example
    http://www.visi.com/~mseberg/data_guard/standby_creation_from_active_database_using_rman.html
    Best Regards
    mseberg

  • Considerations about installing two Data Services in one Server

    Hello experts,
    Can we install the DEV and PRD Data Services 4.2 in one Server?
    If they can, do we have any potential performance problem or another else to be considered before?
    Thanks & Best Regards,
    Tong Ning

    Hello Venken,
    For example, if the customer has the limitation on the money for buying a another server.
    As far as you know, what is the potential problem regarding to this?
    Or we have to advise the customers to buy another server for PRD Data Service.
    Thanks & Best Regards,
    Tong Ning

  • Free Download / Install of  Data Services

    I am new to Data services. I have read the basic literature with respect Data Services.
    I wanted to download the Data Services - Server and clients on my laptop to try out exercises.
    Can any one tell me,
    If I can download and install data services on my laptop.  Does SAP allows to downlaod for education purposes?
    If yes, can you please provide the link from where I can download and install.
    Thanks,
    Sudha

    HI Sudha,
    I think you cant do that. you can have a 90 days license. Kindly please check on sap.com for more details.
    Please close the question if you are satisfied with the answer.
    Regards,
    Den

  • Installing LiveCycle Data Services Manually

    This question was posted in response to the following article: http://help.adobe.com/en_US/ColdFusion/9.0/Installing/WSB53CBD63-A21C-4f31-8F3E-700AE45A02 6E.html

    To find the zip mentioned above, see http://www.adobe.com/support/coldfusion/downloads.html#cf9serverinstallers.

  • Master Data Services not available under shared feature while installing SQL server 2012

    Hi,
    I am trying to install Master Data Services but do not see the option to select MDS under the shared features when going through the SQL server 2012 installation. I have the SQL server 2012 SP1 (64 bit) install files. I have also installed SP2. I havent
    found anything online about the issue.
    Can someone please advise?
    I have a screenshot of the installation screen which I will attach as soon as I am able to get my account verified. Thanks!

    Hi Revees,
    This might be a very naïve and also out of the original scope of the thread question.
    We are thinking of going with the developer edition. We have 2/3 developers and some other testers and business users.
    1) I understand that we need a developer license for each developer. But would we need a license for the business user. Can they have a sort of read access to the dbs?
    2) If a developer has MSDN subscription, Would they need to purchase the license too assuming we purchase the developer edition of the software (and not download it using the MSDN subscription)?
    Thanks for your assistance!

  • Can we install Business Objects Data Services XI 3.2 with BOE 3.1 SP2

    Hi,
    I want to install SAP Data Services XI 3.2 and BW 7.1 and BOE 3.1 SP2 are already in place. I want to know befor installation of Data Services that it is compatible with BOE 3.1 SP2. The documentation for Data services tell only about the compatibility of BW and not about BOE. If anybody has installed Data Services XI 3.2 with BOE 3.1 or knows about version compatibility, please shed some light.

    Yes,
    I have tried install BOE 3.1 SP2 and DS 3.2 SP2 together on 1 machine Windows 2003 64 bit before.
    They works fine together.
    Just make sure you deploy Tomcat correctly for DS Management Console.
    Hope this helps,
    Henry Le

  • Implementing active data service proxy for MySQL database

    Hi,
    I am referring "Oracle Fusion Developer Guide - Building rich Internet Application..." to implement Active data Service to update Af:Table for any change in the MySQL database.
    The book discusses of a class which extends ADS "BaseActiveDataModel" which should handle starting and stopping of active listener and listener registration.
    1. Does this class is sufficient to detect changes coming from MySQL database or is it specific to Oracle database?
    2. Also the book does not discuss about the code for starting stopping or registering active listeners. Can someone guide me to some reference material or to a right place which explains me what kind of code does these methods require?
    3. Also I wonder if anyone knows, if we can differentiate between events generated from different database tables. (I guess we need to do that by using 'instanceof' operator and comparing ViewObjects from my project).
    (Just trying to develop my understanding around various ADF concepts.)
    Thanks!!
    (Have also referred http://technology.amis.nl/2012/06/18/notifying-adf-applications-of-database-changes-fast-and-lean-using-database-query-result-change-notification-part-one/
    not sure if that's the way I need to register the listener. ADF should have made that easy.)
    Edited by: 996574 on May 23, 2013 3:11 PM

    Above link seems helpful to find good blogs.
    Especially following blogs looks good;
    http://adfwithejb.blogspot.com/2012/12/active-data-serivce-with-data.html
    http://adfwithejb.blogspot.com/2012/12/active-data-service-with-active-image.html
    Thanks Shay Shmeltzer!

  • How to install Adobe LiveCycle Data Services on JBoss

    Hi,
    I could not install LiveCycle Data Services on JBoss and I understand there are some port conflicts. Please, I need detailed explanation of how to do so.
    Best regards
    Khaled

    Where can i find Elements 11 download, everytime i get directed to 12.

  • Looking for Active Data Service samples with RDBMS change notification fire

    Hi,
    I am looking for samples/examples of Active Data Service when a server side event, like RDBMS change notification got triggered.
    The ADS samples that I found so far are:
    - Twitter http://www.oracle.com/technetwork/developer-tools/jdev/learnmore/65-activedataservicestwittersample-191314.pdf
    - http://adfwithejb.blogspot.com/2012/12/active-data-service-with-active-image.html
    - http://adfwithejb.blogspot.com/2012/12/active-data-serivce-with-data.html
    But these samples do not demonstrate how RDBMS change notification got triggered got triggered. The last two samples have a Runnable class that simulate the triggering, and the Twitter example is twitter stream notification.
    Please shed some lights on Active Data Service with RDBMS change notification got triggered.
    Thanks
    -Mina

    Hi Mina,
    Check this 2 resources, first a presentation made at OOW by Lucas Jellema: http://www.slideshare.net/lucasjellema/push-to-the-limit-rich-and-proactive-user-interfaces-with-adf-oracle-open-world-2011
    second an interesting forum thread around the the topic: ADF BC and the Active Data Service using af:table from what I know this is still valid as of today.
    After reviewing the topic there is also one more link that address this topic:
    http://technology.amis.nl/2012/06/18/notifying-adf-applications-of-database-changes-fast-and-lean-using-database-query-result-change-notification-part-one/?utm_source=rss&utm_medium=rss&utm_campaign=notifying-adf-applications-of-database-changes-fast-and-lean-using-database-query-result-change-notification-part-one
    Thanks,
    JC
    Edited by: Juan Camilo Ruiz on Jan 9, 2013 2:57 PM

  • Access a repository in Data Services 4.0 Designer

    Hi all
    I installed the Data Services 4.0. and created DS Central repository "DS_repo".
    This repository is visible in the CMC Data service but having the Connection status- not active
    and when we try to login the DS Designer by administrator it show a message
    No Repository are associated with this user
    try another user or system
    Can any one tell me how to use  the repository in my Data Servicies designer
    Thanks
    Bapin
    Edited by: Bapin Tripathy on Dec 15, 2011 6:58 AM

    Hi Bapin,
    I had the same problem - the solution was the creatiion of an additional local repository.
    You also need to make sure to add the users as principals for the local repository.
    Hope it works for you too
    Regards,
    Vassilena

  • What are the System pre-requisite for the BODS installation(SAP Data services)

    I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

    Hi Siddhu,
    Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
    Tutorial: How to install SAP Data Services 4.2 - Part 1
    Regards
    Arun Sasi

  • SAP R3 Connection in Data Services - Configuration is

    Dear all,
    We are having an error when going through the steps in the configuration of BusinessObjects Data Services 3.2 with R3. The error is in the SAP R3 server.
    Herewith the steps in regular font (based on the SAP BusinessObjects guide) and our output results in bold. If you can take a look on it, it will be great for us.
    To install provided functions using the CTS system:
    1.     Copy the provided transport files to the appropriate directories on the SAP server.
    Installing Functions on the SAP Server Installing the functions using CTS
    Note:
    In these steps, 900XXX.SXX is a variable. To substitute the correct file name for the current release, see the readme.txt file in the ...\DataServices\admin\R3_Functions\transport directory.
    -     Copy R900XXX.SXX to the /usr/sap/trans/data directory.
    -     Copy K900XXX.SXX to the /usr/sap/trans/cofiles directory.
    As we have R3 connection we have moved the R63 file. Complete name of the files are:
    -     R900086.R63
    -     K900086.R63
    2.     Log on to the SAP server and run the transaction /nSE37 to determine if function group ZAW0 already exists. The CTS system will install the Data Services functions into a single function group ZAW0 that it automatically creates on the SAP server if it does not already exist.
    -     If function group ZAW0 exists and contains previously installed Data Services functions, add an unconditional mode 2 option (parameter U2) to the tp import command described in step 4 below (tpimport S<xx>K900<xxx> <SID> U2).
    -     If function group ZAW0 exists and is used for another purpose, modify the transport file to use a different function group (such as ZAW1) to install the Data Services functions. Make sure the function group you use does not already exist in your system.
    -     If you are installing the transport files on a Unicode-enabled SAP server, manually create the function group ZAW0 with the Unicode attribute set.
    In our case we have found there is already a ZAW0 created -> nothing to do in this step
    3.     From a command window, run the following transport command:
    -     tp addtobuffer S<xx>K900<xxx> <SID>
    (where SID is the SAP system ID)
    You receive the response:
    This is tp version <SAP TP and SAP versions> for <database type> database.
    Addtobuffer successful for S<xx>K900<xxx> tp finished with a return code: 0 meaning:
    Everything OK
    This is the command we have run and the error retrieve
    The SID is NDV.
    C:\tp addtobuffer R63k900086 NDV
    This is tp version 372.04.57 (release 700, unicode enabled)
    E-TPSETTINGS could not be opened.
    EXIT
    Error in TPSETTINGS: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
    error in transportprofil (param missing, unknown, ....)
    We have modified the statement with different names for the R63 file, but we didnu2019t success. We are retrieving same error.
    We also have applied the command in the following link:
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/etpsettings-could-not-be-opened-875506
    and retrieve another error. The following step would be doing the u201CSAPEVTPATHu201D downloading, but, we are not sure if this would fix the issue or if the issue is related to something else.
    4.     Run the next transport command:
    tp import S<xx>K900<xxx> <SID>
    (where SID is the SAP System ID)
    We couldnu2019t reach this point, as we are having an error in the command below.
    Thanks for your help on this!
    Beatriz Minguez

    There is a problem in the transport file supplied with BODS installation folder. Pls refer to the SAP Note :
    1616269 - Problems when installing Data Services 4.0 SAP transport files (900155.R63)
    We have used the new transport files but we are still getting the below warnings in the log files and it returned with return code 4 :
    Maximum length ("255") for "CHAR" in transparent tables exceeded
    The SAP Note 1446648 - Warning Messages installing SAP R3 transports for Data Services sayou can ignore those warnings but we are still not able to see the ZAW0 Function group in SE37.
    Let me know if you are able to do it successfully.

  • Newbie question about livecycle data services es

    Hi all.
    i've downloaded the LiveCycle ES2 VMware virtual appliance, setup it up on a esxi server, workspace, content space, all are up and running, but here comes my question, how do i install livecycle data services in there?how do i set it up to start working with the rest?
    i've read the documentation on how to install, but i'm a bit confused.
    can anyone give me any pointers about this?
    help would be appreciated
    thanks in advance

    1) In Workbench ES2 create a process to create a new user. If you need to create a group there is also a service to create group. Create a short-lived process using the Avoka service > Create User operation. The Create User operation has the inputs depicted below.
    2) Create a process variable called 'newUserXml' of type 'xml' and declare the variable as input. Ideally, create a schema for the xml.
    3) The Create User operation has a single output, a string containing the user ID. Create a process variable called 'userID' of type 'string' and declare the variable as output.
    3) Save, check-in, and deploy the process.
    4) To test the process, invoke the process from the Workbench. For the input variable, plug data into an xml structure such as this...
    <NewUser>
    <Login/>
    <Password/>
    <CommonName/>
    <CanonicalName/>
    <Description/>
    <Email/>
    <Initials/>
    <OrgName/>
    <Address/>
    <Telephone/>
    </NewUser>
    5) If the test succeeds, you are ready to create the Flex application. If not, figure out why.
    6) Build a Flex app. Once you deployed the process, the remoting endpoint is automatically created and can be accessed by Flex. Here is a stub.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="initChannelSet()">
    <mx:Script>
    <![CDATA[
    import mx.messaging.channels.AMFChannel;
    import mx.messaging.ChannelSet;
    import mx.rpc.events.ResultEvent;
    import mx.rpc.events.FaultEvent;
    private function initChannelSet():void {
    var cs:ChannelSet= new ChannelSet();
    cs.addChannel(new AMFChannel("my-amf","http://localhost:8080/remoting/messagebroker/amf"));
    ro.channelSet = cs;
    private function submitRequest():void {
    var newUser:XML = new XML(getXmlData());
    ro.setCredentials("administrator","password");
    ro.invoke({newUserXml:newUser});
    private function remotingResultHandler(event:ResultEvent):void {
    var userID:String = event.result.userID;
    private function remotingFaultHandler(event:FaultEvent):void {
    Alert.show(event.fault.faultDetail.toString());
    private function getXmlData():String {
    var xmlStr:String = "<NewUser>"
      + "<Login>" + login.text + "</Login>"
      + "<Password>" + password.text + "</Password>"
      + "<CommonName>" + commonName.text + "</CommonName>"
      + "</NewUser>>";
      return (xmlStr);
    ]]>
    </mx:Script>
    <mx:RemoteObject id="ro" destination="MyApplication/processes/CreateNewUser"
       result="remotingResultHandler(event)" fault="remotingFaultHandler(event)"/>
    <mx:VBox>
       UI goes here...
       <mx:Button label="Submit" click="submitRequest()"/>
    </mx:VBox>
    </mx:Application>
    Steve

Maybe you are looking for