Install of HA MaxDB in a Sun Cluster 3.2 environment
Hi. I am installing SAP Content Server using MaxDB in a Sun Cluster 3.2 environment. According to the SUN doc, I must install the X_server as a scalable resource/service. For a scalable resource, I have to make the disk available on both nodes of the cluster. I need to identify what are all the executables for the x_server so that I can make those mount points a NFS share. From looking at the content of previous non-clustered installs, I am thinking I need to make the directories /sapdb/data and /sapdb/program NFS to isolate the x_server components. Does anyone have experience with this setup ? I've placed a log with OSS but wanted to see if anyone else in the forum has done this before. Thanks for any input.
Hello Dan,
Please review the SAP Note No. 803452.
X_server tool is the the part of the indepentent database software installation <independent_program_path>. Using NFS you could set up the <independent_program_path> and <independent_data_path> directories as share directories.
Thank you and best regards, Natalia Khlopina
Similar Messages
-
Upgrading Solaris OS (9 to 10) in sun cluster 3.1 environment
Hi all ,
I have to upgrade the solaris OS 9 to 10 in Sun cluster 3.1.
Sun Cluster 3.1
data service - Netbackup 5.1
Questions:
1 .Best ways to upgrade the Solaris 9 to 10 and the Problems while upgrading the OS?
2 .Sun Trunking support in Sun Cluster 3.1?
Regards
RamanaHi Ramana
We had used the live upgrade for upgrading Solaris 9 to 10 and its the best method for less downtime and risk but you have to follow the proper procedure as it is not the same for normal solaris. Live upgrade with sun cluster is different . you have to take into consideration about global devices and veritas volume manager. while creating new boot environment.
Thanks/Regards
Sadiq -
hello
sorry i am a newbie in this area
what is the advantages of installing oracle CRS then the database over sun cluster?
is it needed ? since we already installed SUN cluster....
also could it work if only we install oracle database 10gR2 on the sun cluster?
what are the advantages and disadvantages if we never use SUN cluster,
just install oracle CRS then install the oracle database
sorry for the long question
i really appreciate your helpwhat is the advantages of installing oracle CRS then the database over sun cluster?
is it needed ? since we already installed SUN cluster....1. CRS is required irrespective of whether or not your any vendor clusterware (such as Sun Cluster).
2. Check this white paper from Sun Microsystems which attempts to high light the advantages of using Oracle RAC with Sun Cluster:
http://www.sun.com/blueprints/0105/819-1466.pdf
also could it work if only we install oracle database 10gR2 on the sun cluster?As indicated above, No. You would still need CRS.
what are the advantages and disadvantages if we never use SUN cluster,See if the above mentioned document helps you with this question.
just install oracle CRS then install the oracle databaseYou could very well do this.
HTH
Thanks
-Chandra Pabba -
Sun cluster failed when switching, mount /global/ I/O error .
Hi all,
I am having a problem during switching two Sun Cluster nodes.
Environment:
Two nodes with Solaris 8 (Generic_117350-27), 2 Sun D2 arrays & Vxvm 3.2 and Sun Cluster 3.0.
Porblem description:
scswitch failed , then scshutdown and boot up the both nodes. One node failed because of vxvm boot failure.
The other node is booting up normally but cannot mount /global directories. Manually mount is working fine.
# mount /global/stripe01
mount: I/O error
mount: cannot mount /dev/vx/dsk/globdg/stripe-vol01
# vxdg import globdg
# vxvol -g globdg startall
# mount /dev/vx/dsk/globdg/mirror-vol03 /mnt
# echo $?
0
port:root:/global/.devices/node@1/dev/vx/dsk 169# mount /global/stripe01
mount: I/O error
mount: cannot mount /dev/vx/dsk/globdg/stripe-vol01
Need help urgently
JeffI would check your patch levels. I seem to remember there was a linker patch that cause an issue with mounting /global/.devices/node@X
Tim
--- -
How to install a SUN cluster in a non-global zone?
How do I install a SUN cluster in a non-global zone? If it is the same as installing SUN Cluster in the global zone, then how do I access the cdrom from a non-global zone to the global zone?
Please point me to some docs or urls if there are any. Thanks in advance!You don't really install the cluster software on zones. You have to set up a zone cluster once you have configured the Global Zone cluster (or in other words, clustered the physical systems + OS).
http://blogs.sun.com/SC/entry/zone_clusters -
Sun Cluster Core Conflict - on SUN Java install
Hi
We had a prototype cluster that we were playing with over two nodes.
We decided to uninstall the cluster by putting node into single user mode and running scinstall -r.
Afterwards we found that the Java Availability Suite was a little messed up - maybe because the kernel/registry had not been updated - it though the cluster and agent software was uninstalled and would not let us re-install. All the executabvles from /etc/cluster/bin had been removed from the nodes.
So, On both nodes we ran the uninstall program from /var/sadm/prod/... and then selected cluster and agents to uninstall.
On the first node, this completely removed the sun cluster compoenets and then allowed us to re-install the cluster software successfully.
On the second node, for some reason, it has left behind the component "Sun Cluster Core", and will not allow us to remove it with the uninstall.
When we try to re-install we get the following:
"Conflict - incomplete version of Sun Cluster Core has been detected"
In then points us to the sun cluster upgrade guide on sun.com.
My question is - how do we 'clean up' this node and remove the sun cluster core so we can re-install the sun cluster software from scratch?
I don't quite understand how this has been left behind....
thanks in advance
S1black.You can use prodreg directly to clean up when your de-install has gone bad.
Use:
# prodreg browse
to list the products. You may need to recurse down into the individual items. The use:
# prodreg unregister ...
to unregister and pkgrm to remove the packages manually.
That has worked for me in the past. Not sure if it is the 'official' way though!
Regards,
Tim
--- -
Can I install Sun Cluster on LDOM guest domain. Is Oracle RAC a supported c
Hello,
Can I install Sun Cluster on LDOM guest domains. Is Oracle RAC on LDOM guest domains of 2 physical servers a supported configuration from oracle?
Many thanks in advance
Ushas SymonHello,
The motive behind using LDOm Guest domains as RAC node is to have a better control of the resource allocation, since i will be having more than one guest domains which should perform different functions. The customer wants to have ORACLE RAC alone (without sun cluster).
I will have two T5120's and one 2540 shared storage.
My plan of configuration is to have
Control&IO Domain with 8VCPU, 6GB mem
one LDOM guest domain on each physical machine with 8 VCPU's, 8GB of memory, shared n/w and disks participating as RAC node's. (Don't know yet if i will use solaris cluster or not)
one guest domain on each physical machine with 12 VCPU's, 14GB of memory, shared n/w and disks participating as BEA weblogic cluster nodes (not on solaris cluster)
One guest domain on each physical machine with 4 VCPU's, 4GB of memory,shared n/w and disks participating as apache web cluster (on solaris cluster)
Now, My question is, is it a supported configuration to have guest domains as Oracle RAC participants for 11gR2 (either with or without solaris cluster).
If I need to configure RAC nodes on solaris cluster, is it possible to have two independent clusters on LDOM , one 2 node cluster for RAC and another 2 node cluster for apache web?
Kindly advise
Many thanks in advance
Ushas Symon -
Errors after initial Sun Cluster install
- SunOS conch 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V210
- Sun Cluster 3.2
I've gone through the scinstall process using the standard answers to questions. The only exception is that when it came to quorum, I answered I would set it up later, as I want to try to the quorum server. There's no shared storage - I'm seeing if it's possible to create a cluster using IP based replication.
I'm getting these error messages every 30 seconds (looks like a result of:
# svcs lrc:/etc/rc3_d/S91initgchb_resd
STATE STIME FMRI
legacy_run 16:19:29 lrc:/etc/rc3_d/S91initgchb_resd
Feb 8 16:38:59 conch Cluster.GCHB_resd: Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 8 16:38:59 conch Cluster.GCHB_resd: GCHB system error: scha_cluster_open failed with 18
Feb 8 16:38:59 conch : Bad file number
Feb 8 16:39:29 conch Cluster.GCHB_resd: Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 8 16:39:29 conch Cluster.GCHB_resd: GCHB system error: scha_cluster_open failed with 18
Feb 8 16:39:29 conch : Bad file number
Feb 8 16:39:59 conch Cluster.GCHB_resd: Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 8 16:39:59 conch Cluster.GCHB_resd: GCHB system error: scha_cluster_open failed with 18
Feb 8 16:39:59 conch : Bad file number
Feb 8 16:40:29 conch Cluster.GCHB_resd: Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 8 16:40:29 conch Cluster.GCHB_resd: GCHB system error: scha_cluster_open failed with 18
Feb 8 16:40:29 conch : Bad file number
There's no file system errors, and I'm at a complete loss as to why there appears to be this problem. Can anyone offer any advice?
Cheers,
IainHi,
there are 2 issues here.
1. THe error messages that you see. I get them on my freshly installed cluster as well. What did I do? I used the JES installer and installed SC3.2 and SCGeo 3.2 - to be configured later. Ithink that it should only install the packages but not configure any part of them. It seems that it does oitherwise. To me ghcb sound like global cluster heartbeat.. I'll follow up with the developers to get this clarified.
2. Replication within a cluster and no shared storage. THis has several aspects. I, too, see more and more customer demand to have this. If you get it to work let us know. I am not sure though, why you installed the SC Geo edition to achieve this, as I do not think it well help you here.
In any case I can only recommend to set up the quorum server before proceeding, otherwise your whole cluster will panic as soon as you do a single reboot. That is per design..
Regards
Hartmut -
Installing sun cluster on system based on SUNWcrnet
Hi,
I'm planning to testdrive the sun cluster software. All our systems do run the SUNWcrnet install cluster plus additionally required packages. I read that for sun cluster 3.1 at least SUNWCuser is necessary. Did anybody succeed in running sun cluster software on a system based on SUNWcrnet? If yes which are the additionally needed packages?
Thanks,
markI wouldn't bother. You will need to install way too many packages. SUNWcrnet by default does not even give you the showrev command. I rather install everything and then disable what I don't need.
-
Jumpstart install of sun cluster 3.1
Hi,
I'm trying to use jumpstart to install a 2nodes cluster. Solaris9 installs but get problems when the cluster software begins to install. I get these error messages:
Performing setup for Sun Cluster autoinstall ... nfs mount: scadm: : RPC: Rpcbin
d failure - RPC: Success
nfs mount: retrying: /a/autoscinstalldir
nfs mount: scadm: : RPC: Rpcbind failure - RPC: Success
nfs mount: scadm: : RPC: Rpcbind failure - RPC: Success
nfs mount: scadm: : RPC: Rpcbind failure - RPC: Success
nfs mount: scadm: : RPC: Rpcbind failure - RPC: Success
n
It does not install further. Could somebody give some suggestions?
thank you, pcurranHi All,
I have decided to first install sun cluster 3.1(trail version) manually:
1) installed sun_web_console. Installation completed successfully but got this statement at the end:
"Server not started, No management application registed"
2) Went ahead and to run "scinstall" but got this error:
** Installing SunCluster 3.1 framework **
SUNWscr.....failed
scinstall: Installation of "SUNWscr" failed
Below is the "log file":
** Installing SunCluster 3.1 framework **
SUNWscr
pkgadd -S -d /cdrom/hotburn_oct24_05/suncluster3.1/Solaris_sparc/Product/sun_clu
ster/Solaris_9/Packages -n -a /var/cluster/run/scinstall/scinstall.admin.11374
SUNWscrfailed
pkgadd: ERROR: cppath(): unable to stat </cdrom/hotburn_oct24_05/suncluster3.1/S
olaris_sparc/Product/sun_cluster/Solaris_9/Packages/SUNWscr/reloc/etc/cluster/cc
r/rgm_rt_SUNW.LogicalHostname:2>
pkgadd: ERROR: cppath(): unable to stat </cdrom/hotburn_oct24_05/suncluster3.1/S
olaris_sparc/Product/sun_cluster/Solaris_9/Packages/SUNWscr/reloc/etc/cluster/cc
r/rgm_rt_SUNW.SharedAddress:2>
ERROR: attribute verification of </etc/cluster/ccr/rgm_rt_SUNW.LogicalHostname:2
failedERROR: attribute verification of </etc/cluster/ccr/rgm_rt_SUNW.SharedAddress:2>
failed
pathname does not exist
Reboot client to install driver.
Installation of <SUNWscr> partially failed.
scinstall: Installation of "SUNWscr" failed
scinstall: scinstall did NOT complete successfully!
Could someone please give some direction?
thank you, pcurran -
Installing oracle 10g RAC on sun cluster
Hi
we r implementing new setup with fallowing configuration
OS: sun solaris 10 on sunfire v890 servers 2 node rac
4 processor server sun SPARC 64 bit
SUN cluster
oracle :10.2.0.3
please send me related documents for installing CRS and RdBMS and
Message was edited by:
Adithya
Message was edited by:
AdithyaInstallation Guide for Solaris Cluster 3.2 Software and Oracle 10g Release 2 Real Application Clusters
-
SUn CLuster 3.2 install - scinstall on x86 32 bit Solaris 5.10
Ok - I have 2 machines with 32-bit x86 SOlaris 5.10 - I installed the Sun Cluster 3.2 software but everytime I try scinstall it says rebooting other node and the other node never brings sun cluster up -
Questions:
1. The private interface does not come up on reboot - should it - and should I have an entry for cluster-priv1 in /etc/hosts
2. I know I am supposed to do a scvx -xv - I then try to enable the cluster service, but everything says disabled
I have tried this 5 times no luck - I have lots of cluster experience - and can get Oracle CRS working fine
Any thoughtsYeahh, guys!!!
I was trying to establish a two-node cluster using VirtualBox + Solaris x86 + Sun Cluster 3.2. The node where I was running scinstall to configure my cluster environment was rebooting the other node in the end of the configuration process but it was hanging in the "Rebooting node01..." message just because it was not able to establish the cluster.
After see your comments, I changed Solaris x86 to Solaris Express Community Edition and Sun Cluster to Cluster Express and now everything is working fine!
Thanks!
Jansen Sena <[email protected]> -
Hi all,
Need some help from all out there
In our Sun Cluster 3.1 Data Service for Oracle RAC 9.2.0.7 (Solaris 9) configuration, my team had encountered
ora-29701 *Unable to connect to Cluster Manager*
during the startup of the Oracle RAC database instances on the Oracle RAC Server resources.
We tried the attached workaround by Oracle. This workaround works well for the 1^st time but it doesnt work anymore when the server is rebooted.
Kindly help me to check whether anyone encounter the same problem as the above and able to resolve. Thanks.
Bug No. 4262155
Filed 25-MAR-2005 Updated 11-APR-2005
Product Oracle Server - Enterprise Edition Product Version 9.2.0.6.0
Platform Linux x86
Platform Version 2.4.21-9.0.1
Database Version 9.2.0.6.0
Affects Platforms Port-Specific
Severity Severe Loss of Service
Status Not a Bug. To Filer
Base Bug N/A
Fixed in Product Version No Data
Problem statement:
ORA-29701 DURING DATABASE CREATION AFTER APPLYING 9.2.0.6 PATCHSET
*** 03/25/05 07:32 am ***
TAR:
PROBLEM:
Customer applied 9.2.0.6 patchset over 9.2.0.4 patchset.
While creating the database, customer receives following error:
ORA-29701: unable to connect to Cluster Manager
However, if customer goes from 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the problem does not occur.
DIAGNOSTIC ANALYSIS:
It seems that the problem is with libskgxn9.so shared library.
For 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the install log shows the following:
installActions2005-03-22_03-44-42PM.log:,
[libskgxn9.so->%ORACLE_HOME%/lib/libskgxn9.so 7933 plats=1=>[46]langs=1=> en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in, it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW, tr,uk,vi]]
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]]
For 9.2.0.4 -> 9.2.0.6, install log shows:
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]] does not exist.
This means that while patching from 9.2.0.4 -> 9.2.0.5, Installer copies the libcmdll.so library into libskgxn9.so, while patching from 9.2.0.4 -> 9.2.0.6 does not.
ORACM is located in /app/oracle/ORACM which is different than ORACLE_HOME in customer's environment.
WORKAROUND:
Customer is using the following workaround:
cd $ORACLE_HOME/rdbms/lib make -f ins_rdbms.mk rac_on ioracle ipc_udp
RELATED BUGS:
Bug 4169291Check if following MOS note helps.
Series of ORA-7445 Errors After Applying 9.2.0.7.0 Patchset to 9.2.0.6.0 Database (Doc ID 373375.1) -
SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)
Dear All;
i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
for the SAP i did the following configurations
# clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
# clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
it executes the startsap scripts successfully as following
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
stty: : No such device or address
stty: : No such device or address
Starting SAP-Collector Daemon
11:04:57 04.06.2008 LOG: Effective User Id is root
Starting SAP-Collector Daemon
11:04:57 04.06.2008 LOG: Effective User Id is root
* This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
* This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host eccprd01 started
Starting SAP Instance ASCS00
Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
saposcol on host eccprd01 started
Running /usr/sap/PRD/SYS/exe/run/startj2eedb
Trying to start PRD database ...
Log file: /export/home/prdadm/startdb.log
Instance Service on host eccprd01 started
Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
/usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
Starting SAP Instance SCS01
Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
Instance Service on host eccprd01 started
Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
Instance on host eccprd01 started
Instance on host eccprd01 started
and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:28 eccprd01 last message repeated 1 time
Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:46 eccprd01 last message repeated 1 time
Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:49 eccprd01 last message repeated 1 time
Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:52 eccprd01 last message repeated 1 time
Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:58 eccprd01 last message repeated 1 time
Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:01 eccprd01 last message repeated 1 time
Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:04 eccprd01 last message repeated 1 time
Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:13 eccprd01 last message repeated 1 time
Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:16 eccprd01 last message repeated 1 time
Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:22 eccprd01 last message repeated 1 time
Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:25 eccprd01 last message repeated 1 time
Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:34 eccprd01 last message repeated 1 time
Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:37 eccprd01 last message repeated 1 time
Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:43 eccprd01 last message repeated 1 time
Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:46 eccprd01 last message repeated 1 time
Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
ARSSESHi all.
I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
Scenrio:
Central Instance (not incluster) : Started on one node
Dialog Instance (not in cluster): Started on the other node
When I create the resource for SUNW.sap_as like
clrs create --g sap-rg -t SUNW.sap_as .....etc etc
in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
Then after timeout it gives up.
Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
TIA -
File System Sharing using Sun Cluster 3.1
Hi,
I need help on how to setup and configure the system to share a remote file system that is created on a SAN disk (SAN LUN ) between two Sun Solaris 10 servers.
The files in the remote system should be read/writabe from both the solaris servers concurrently.
As a security policy NFS mount is not allowed. Some one suggested it can be done by using Sun Cluster 3.1 agents on both servers. Any details on how I can do this using Sun Cluster 3.1 is really appreciated.
thanks
SureshYou could do this by installing Sun Cluster on both systems and then creating a global file system on the shared LUN. However, if there was significant write activity on both nodes, then the performance will not necessarily what you need.
What is wrong with the security of NFS? If it is set up properly I don't think this should be a problem.
The other option would be to use shared QFS, but without Sun Cluster.
Regards,
Tim
---
Maybe you are looking for
-
I work for an auditing firm and we have recently gone paperless with our audit documentation. We have our files saved on a server and multiple people can access the same file at one time. We noticed that Acrobat does not give an message notifying a u
-
WRT310N as an access point?
I currently have a Linksys WRT310N as my primary router/wireless device. I am not getting coverage in my entire home. I was considering purchasing the Linksys E4200 and using the WRT310N as an access point in another part of my house to extend my wir
-
Hi, I think this may be because I have moved the location of them but for a couple of rolls I just have a blank square with grey lines around the edge. I can see the image if I open it in full screen but it does not appear in the smaller version. Ple
-
Kernal Panic - any help?
Hi I got a KP shut down today. Wondering if anyone can help. It happened when I closed Quicktime 7 (which I use regularly). No third-party RAM, nothing else fishy that I know of (lastest version of flash, etc). I also have problems with the computer
-
"System Group" in SOA Suite 11g
Everything looks good while upgrading ESB of FW 10g to Mediator of 11g. But seems there is no "Service Group" concept, which is introduced in ESB for projects hierarchy. Does anybody know any similar ideas in FW 11g? What I want is to group projects