Install of NI Developer Suite 2010 hangs at inserting DVD 2

I am trying to install NI Developer suite 2010 DS2 on my home PC, upgrading from 8.6. When it comes to the point where I need to insert the DVD #2, it hangs. Wont let me rescan drive, cancel or close the window. Only way out I've found is a restart of XP. I picked the automatic component selection based on my license. How do I get past this?

Yes, I tried the install three times from the DVD with a restart and inserting the DVD into the drive. I could not exit or close the installer nor the window that was asking to insert DVD #2 in any way other than a restart. I tried all three DVD's and an empty DVD tray in every combination. Typically I would get an explorer window of the DVD root directory at the DVD insertion. The explorer window title would have the correct DVD number.
I am not sure where in the process it stopped, but it did get far enough that I could start LabView, so I activated it.
I didn't think it was significant at the time, but I also could not get past the part of the instalation where it checks for updates before actually installing anything without unchecking the box for it to do this check. I gave it 30 to 45 minutes without success the first time and unchecked the box every other time I started the install.

Similar Messages

Problem installing Oracle Internet Developer Suite 1.0.2.4.1 (Forms & Reports 6i)

Hi all,
I am unable to install Oracle Internet Developer Suite 1.0.2.4.1 - specifically Forms & Reports 6i, Designer, Discoverer (ALL Products on Quick Install option on Windows 98 system). The installation proceeds to Install screen when the various files start to load ... Then the whole process stops after showing 100% load (sometimes the screen freezes, sometimes I get error message - illegal instruction etc) when the following file is being loaded :
Extracting ... ewt_swingaccessbridge.jar
I have another question :
I have Personal Oracle 8i (8.1.7) installed on D:\Oracle\Ora81 already.
During the install process (before I get the above error message) the 8.1.7 RSF-based product install location screen presents itself with the option to create a new Oracle Home and location (The preferred Oracle Home name iDSData and preferred Oracle Home Location D:\ORACLE\iDSData are already entered in the boxes) or Select an existing ORACLE_HOME. My existing ORACLE_HOME is
D:\Oracle\Ora81. What am I supposed to do at this point ? The installation guide is not explicit. Any help with these topics will be greatly appreciated.
I will be greatly obliged to anyone who can assist me with installing Forms & Reports 6i. Many thanks in advance.
Sincerely,
Partha Sur
[email protected]

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Problem installing Oracle 9i developer suite

Hi Friends,
I have problem in installing Oracle 9i Developer suite downloaded from Oracle website. When I am installing I get this error
Unable to find product oracle.swd.jre[1.1.8.1.2] in Oracle inventory.
Later on I get this error
Error writing to file C:\oracle\product\bin\ociw32.dll
and another couple of such errors.
Can anyone guide me regarding this installation it would be of gr8 help.
Thanks a lot for your help.
Manju

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Problème d'installation NI developer Suite 2010 SD1

Bonjour à tous,
J'ai un problème d'installation de la suite NI developer Suite 2010 SD1, lors du changement du DVD, l'ecran de demande de confirmation du chemin reste figée, que ce soit pour le dvd2 ou le dvd3 (avec une autre config d'installation). J'ai essayé d'installer le produit sur un autre PC (de bureau contre portable à l'origine), je rencontre le même problème. Après avoir lu le forum et réessayé l'installation en startant sur le setup au lieu de l'autorun, j'ai le même problème...
Auriez vous une information concernant ce problème.
Lionel

Bonjour.
Par quel biais avez-vous reçu ces dvd? Etait-ce une mise à jour automatique ou une commande que vous avez-faite?
Par ailleurs, avez-vous essayer de rentrer le chemin en dur avant d'insérer le dvd?
Cordialement.

NI Developer Suite 2010 is not LabVIEW 2010

Received new disks that read "NI Developer Suite 2010", which is misleading because this is not LabVIEW 2010, it is LabVIEW 2009 SP1. So now we have mismatched Developer Suite / LabVIEW.
Richard
Solved!
Go to Solution.

fix...
Message Edited by Broken Arrow on 04-27-2010 02:33 PM
Richard
Attachments:
blacksharpie.gif ‏12 KB

Error while installing oracle 10g developer suite on windows xp

I am getting following error when i am trying to install the oracle 10g developer suite windows xp with sp3
+*"---------------------------*+
Oracle Universal Installer+
---------------------------+
Error in writing to directory c:\TEMP\OraInstall2010-03-18_12-57-52PM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue."+
Even i have enough space of my C drive plus i m the administrator on my PC. I changed the temp location as well and download the zip files(installation) again but it doesn't work. Kindly provide some solution for this error.

Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) This means you already have ISA configured as proxy server. Disable the proxy from the browser and you should be able to access the application. Or simply add the application URL to the list of the proxy exceptions.

Problem installing Oracle 9i Developer Suite 9.0.2.0.1

I hope somebody maybe able to assist me. I am in the process of installing the aforementioned developer's suite with my existing oracle 9i database so that I can experiment from home.
For some reason when I try and install the developer's suite on my PC (Windows XP) and choose any of the options I get the following message: "Oracle9iAS cannot be installed in an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home".
What version of the developer's suite am I supposed to download? Or what am doing wrong.
If someone could help that would be much appreciated.

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Problem - Installing oracle 10G & Developer Suite

Dear Team
I am trying to install Developer Suite and Oracle 10g . but unable to get into Sql. always i am getting a error . where as i changed everything in tnsnames.ora and checked the Listner. In Oracle 9i i dont get the error and very somoothly i can install and configure it . here some times it gives a error as Account Locked etc.,
Please advice how to configure or where I am doing a mistake
Sanjay

Few more details about how you are connecting and which user you are using for connection would be helpful.
With Oracle 10g, assuming that you have created a sample database on the same machine with mostly DBCA...
here some times it gives a error as Account Locked etc.,if you are referring to ORA-28000 error, then it seems the password that you have been using is incorrect and you have exceeded the failed login attempts.
Or you need to unlock the user in first place, since that is locked by default during Oracle installation (assuming you are referring to the sample schemas).

LabVIEW Developer Suite 2010 32 bit crashes on Windows 7 64 bit

I have a new Laptop, fresh install.
Windows 7 64 bit machine
Loaded LabVIEW 2010 10.0 32 Bit onto the machine.
I get the initial LabVIEW 2010 Splashscreen, showing make company and license then I get the following error:
LabVIEW 10.0 Development System
LabVIEW 10.0 Development System has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Hi N4KSS,
Can you try to repair the LabVIEW installation and see if this helps to resolve the issue? Here is a KB titled "How can I Repair my LabVIEW Installation?" that describes the process.
Also, is the installation being performed from a LabVIEW 2010 CD or from a downloaded installation?
Milan

Installing Repository for Developer Suite 10 G2: Import aborted.

Hi,
I've created a user for the repository and made all the grants.
The datafiles are 1,2 Gigabytes.
I select small install.
Then there is an import starting, but it stops after 2 tables:
******************************* Quote *****************************************
export file created by EXPORT:V09.02.00
Warning : Objects were exported by CORE4012, and not by you
import WE8MSWIN1252 NCHAR AL16UTF16
. Importing objects CORE4012 into REPDES2
. . Importing table "CK_INSTALLED_OBJECTS" 7800 lines imported
es <
. . Importing table "CK_PRODUCT_ELEMENTS" 545 lines imported
es <
*********************************End Quote************************************
I must have missed a step, but I can't find help about the Repository user.
Many thanks if you can help.

Hi Jean,
You should post this thread to Oracle Designer :
Designer
However , i advise you to follow up the automatic config of Designer Repository instead of manual ......
Greetings,
Simon

Tnsnames.ora error when installing oracle 9i developer suite

Hi,
Can anyone answer this question: I recently installed
oracle 9i and i'm getting a tnsnames.ora error when connecting to the database. Can anyone tell me what parameters to modify in the tnsnames.ora and sqlnet.ora files and what values to put in these parameters. Also,
i'm trying to create a net_service_name in oracle net manager(in configuration/management tools) and I can't figure out the service name for versions of Oracle 8i or later. Can someone tell me what this is because the program is asking for a service name. I need this info
for connecting to the database by username/password@net_service_name. Please respond soon.
Thank you.
T. Patel

Go Net8Assistant. Follow the tree Net8Config ->Local -> Service Naming. In this node you will find all instances set (SIDs) and by clicking on them you will see in the right hand part of the screen if they were set or not in tnsnames.ora.
Another way: Usually the database service name is OracleServiceSID. Go Control Panel -> Administrative Tools -> Services and check out the Oracle Service name. Take the SID from there to tnsnames.ora.
You should have write down the name you was asked for while you were installing Oracle (or the default name that the installer put for you).
Hope this will help you
Alexandra

Installating Oracle 10g Developer Suite (most urgent)

Dear All,
I have downloaded ORacle IDS 10g from Oracle web site and tring to install on my win2003 Server.
when i click Setup.exe file it give me error message 'Fatal Error'
pl.give me an prior to installation instruction that i follow,
regards

First, make sure your media is not corrupt.
Next, there are some pre-installation task you must check. Some good advices can be found at www1.tyict.vtc.edu.hk/freddy/DEVELOPER10g_NOTES/OracleDeveloperSuite10gR2InstallWin2003Server.doc.
Which is a document based on the official oracle installation guide http://download-west.oracle.com/docs/cd/B25016_06/doc/dl/core/B16012_03/toc.htm

Problem installing oracle developer Suite 10g on window 7 64 bit

hi am in window 7 64-bit am trying to install my oracle developer suite am geting this error when installing
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\User
s\10017134\AppData\Local\Temp\OraInstall2012-09-21_08-15-55AM\installActions2012
-09-21_08-15-55AM.log
Please press Enter to exit...
i downlload the software from
http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html
my pc is window 7 professional service pack 1
64-bit operating system
now am geting this error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation, at which time they will be rechecked.
Continue? (y/n) [n]
i try to right click mycomputer->advance system setting->system properties->advance->performance->setting->advance->virtual memory->change->virtual memory
Edited by: ADF007 on 2012/09/21 9:22 AM
Edited by: ADF007 on 2012/09/21 9:49 AM
Edited by: ADF007 on 2012/09/24 12:12 PM

hi my installation fail am geting this error
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Net Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: 'C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp'
Start output from spawned process:
Parsing command line arguments:
Parameter "orahome" = C:\DevSuite
Parameter "orahnam" = DevSuite
Parameter "responsefile" = C:\DevSuite\network\install\netca_asinstall.rsp
Done parsing command line arguments.
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Cancel
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Yes/OK
End output from spawned process.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
Result code for launching of configuration assistant is: -1
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
User Selected: Yes/OK
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file C:\DevSuite\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Oracle Net Configuration Assistant
C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp
Error:*** Alert: One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured. A list of the assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-09-21_10-14-35AM.log ***
Edited by: ADF007 on 2012/09/21 4:52 PM
Edited by: ADF007 on 2012/09/21 4:52 PM

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

Installing latest developer suite

I'm installing the latest developer suite. I also downloaded and installed successfully the 10g database, but i get a message devsuite 10g cannot be installed on a 10g database???! If I go on anyway I get a TNS names error (I have two homes know, one for the dbase, one for devsuite) Suggestions?

You cannot install the both product sets into the same Oracle home. Use seperate Oracle homes.
However, you cannot use BI Beans 904, which is part of the 10g Developer Suite, to access a 10g database. To access a 10g database you will need to use BI Beans 10g which is being formally launched next week at Open World San Francisco.
Business Intelligence Beans Product Management Team
Oracle Corporation

Install of NI Developer Suite 2010 hangs at inserting DVD 2

Similar Messages

Maybe you are looking for