Install of SAP on Linux -glibc-32bit-8.1-9 for Novell SUSE SLES Linux 10.

Hi All
We are installing the Oracle on x86_64 using Novell SUSE SLES 10.
As per OSS note 841728 , (Installation Proble #8) for SUSE\UnitedLinux x86_64 ) we should have glibc-32-8.1-9 and glibc-devel-32bit-8.1-9 installed.
We have glibc-32bit-2.4-31.30 and glibc-devel-32bit-2.4-31.30 installed on Linux server.
My question are :-
1) Do we must have these files (glibc-32-8.1-9) installed? Or will do with glibc-32bit-2.4-31.30.
As OUI gives following warning during installation :-
Checking recommended glibc version.......failed
2 ) where to get these files from? I was unable to find these RPMs?
Any help is much appreciated.
Thanks

Dear Hannes
First of all thank you for the reply.
Yes, I am using the "RUNINSTALLER" from SAP directory, but updated "RUNINSTALLER" I downloaded as per OSS note 980426.
Using workaround # 3 , recommended by SAP.
I have downloaded these Oracle CD's (material # 51031676) from service market place 5days ago and they are dated as 11-04-2006.
I have to use OSS note 980426 as I was getting following error
/oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.18836: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 Failed <<<<
Here are the messaged I am getting from OUI
Msg#1
===========================================
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-SUSE Linux Enterprise Server 10 (x86_64)
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Msg#2
Checking operating system package requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Linux Version SuSE-SUSE Linux Enterprise Server 10 (x86_64)' is not supported.
Recommendation: Install the required packages before continuing with the installation.
=======================================================================
Msg#3
Checking security kernel parameters
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Linux Version SuSE-SUSE Linux Enterprise Server 10 (x86_64)' is not supported.
Recommendation: Perform operating system specific instructions to update the kernel parameters, namely BIT_SIZE and noexec_user_stack.
=======================================================================
Msg#4
Checking Recommended glibc version
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Linux Version SuSE-SUSE Linux Enterprise Server 10 (x86_64)' is not supported.
Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.
========================================
So, I was more concern about Msg# 4, and that's how I came across OSS note Note 841728 - Installation problem #8.
So, I believe we are OK to go ahead and run the installation of Oracle, isn't it????
Thank you again.
Sandeep

Similar Messages

Swap hardware for 10.2 database Linux (datafiles reside on SAN server).

Hello Gurus,
I am planning to upgrade hardware for two production database servers (currently Oracle 10.1.0.3.0 on Linux AS3 32bit) to New Dell Poweredge 6850 64 bit Linux AS4 upgrqade 7, Oracle 10.2.0.4.0 with replication enabled on certain tables.
The database tablespaces and datafiles exist on a SAN storage server. I was wondering what is the fastest way to hook up the new servers and migrate or integrate the currrent two databases into the new hardware. I was looking at the old "export/import" but that would have some serious downtime. Transportable Tablespaces looks like an option- but I have no experience in it.
My new servers have Oracle 10.2.0.4.0 installed and the servers are named the same as the old servers. Is there a way to have the new servers point to the SAN storage and just "pick up" the existing tablespaces and datafiles for the existing two databases? I have retained the block_size on the new configuration of 8K.
What is the fastest way to get the new hardware up and running connecting to a SAN storage device "seeing" the old database.
I would love any advice, I have a metalink account- but I thought this type of question would be better suited for the masses of experts out there who may have gine through this exercise before.
Cheers,
blakey

Seems You want to migrate from 32bit architecture to 64bit?
Then for upgrade to 10gR2 see metalink note 316889.1
And as oracle will change from 32bit to 64bit as well (not only linux will 64 bit, but oracle software as well), then additional step for changing wordsize to 64bit is needed. And that is described in metalink note 62290.1
Migration: as Your db is on san storage (everything including controlfiles, parameter files and so on) - then create equal mountpoints on new server (stop databases on old server, mount db related disks from storage to the new server) and that's it - next part is upgrade and migration to 64bit wordsize.
Probably oracle software is installed on local disks and that means You will have to manualy copy $ORACLE_HOME/dbs - spfile, password file to the new server. And of course listener.ora, tnsnames.ora files as well.
You can reffer to this metalink note 363609.1 for more details
Of course, before go through all configuration (/etc/sysctl.conf and so, create equal /etc/oratab and adjust oracle user profile for new server).
And before starting anything - take a full backup of oracle database (hot or cold, whatever You preffer).

How to set and static ip_address for a Suse Linux box

Hi.
I've done the following to set an static ip address for my Suse 9 Linux box:
- Take not of inet address value from ifconfig command. ie: (172.17.2.14)
- Change this value in /etc/hosts for my linux box.
Since Suse is configure by default to use DHCP for assigning dinamic ip_addresses i'm not sure whether will lastly be set as a static address. I've rebooted my box and it seems to be OK.
Thanks in advance ...!

/etc/hosts is not configuration file for ethernet interfaces.
Configuration files for ethernet interfaces are stored in /etc/sysconfig/network directory.
For example if you have eth0 device then configuretion for this device is stored in /etc/sysconfig/network/ifcfg-eth0 file.
Important directives:
DEVICE - interface (eth0)
IPADDR - IP address of interface
NETMASK - netmask
BOOTPROTO - "static" for static configuration, dhcp for dynamic configuration via dhcp
ONBOOT - activating interface during boot (yes/no) (yes - of course :-) )
GATEWAY - default gateway
So for example you want setup static IP (192.168.10.1 / 255.255.225.0) for eth0 interface.
Edit the /etc/sysconfig/network/ifcfg-eth0 file and your configuration should be:
DEVICE=eth0
IPADDR=192.168.10.1
NETMASK=255.255.255.0
BOOTPROTO=static
ONBOOT=yesThen you simply restart the nework using:
/etc/init.d/network restartOR
/sbin/ifdown eth0
/sbinf/ifup eth0 OR
ifconfig eth0 down
ifconfig eth0 up

How to install the SAP Java Connector

Hi,
I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
===
u2022 Copy the librfccm library and the libsapjcorfc library to busines
sobjects_root/enterprise120/PLATFORM_PATH, where busines
sobjects_root is the full path to your businessobjects directory,
and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
is solaris_sparc for an installation on Solaris.
u2022 Use symbolic links for the location of the librfccm library and the lib
sapjcorfc library.
u2022 Add the location of the librfccm library and the libsapjcorfc library
to the library path.
===
Do I have to do all 3 steps or is the 1st one (copying of files) enough?
On the other hand, the SAP Java Connector guide says:
===
Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
===
So, what to do?
Thanks!

Thanks for your help. So i copied the 2 files as mentioned in point 1.
Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
Thanks again!
Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

Installing Oracle 10g on Enterprise Linux 4 Update 5 Media Pack for x86_64

Hello everyone,
I'm trying to determine whether the required rpm packages are installed on the new EL 4, and it seems after running the query using the # rpm -q there are packages missing.
According to the install section from the Doc Library these packages must exist in Red Hat Enterprise Linux 4.0 for 10g to install successfully. My guess is, if RHEL 4 needs to have it, then Oracles Unbreakable should too... right?
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
Has anyone had experience doing such an installation, and if so, what exactly is missing from Oracle's EL4 and where can I get it.

Thanks Terry and Jason for your responses. I've come along on this install but ran into a little snag. Hope you two and other members can help. Here's my output from the xterm:
[root@localhost database]# ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system versions: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2007-05-22_10-52-09PM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installion if the user is root.
: No such file or directory
[root@localhost database]#
I don't know what to do, and weren't able to run it as user_oracle. Could you make a recommendation on how to resolve this error? Also, will I also need to make any clean-up efforts before beginning a new install?
Many thanks.

How to identify the installed Weblogic Server and JDK are 32bit or 64bit?

Hi everyone,
I have a question ~
Both Weblogic Server and JAVA JDK are installed on the server already, but I only know the Weblogic Server is 10.3.4.0 and JAVA JDK version is 1.6.0_25.
I know the 64bit Weblogic Server installation file is a wlsXXXX_generic.jar package and 64bit JAVA JDK needed also.
But, since the Weblogic installed already, there are no such installation files on the Linux Server now.
I have tried the "java -version" for java version and check the Weblogic version from Weblogic console.
How to identify the installed Weblogic Server and JDK are 32bit or 64bit with Linux command? Or is there any way to check it?

What you can try to do is use WLST (or an MBean browser, such as JConsole or JRockit Mission Control) and connect to the adminserver.
For example when using WLST:
# set the environment by using setWLSEnv.sh (located in the ${WL_HOME}/server/bin directory).
# start WLST by using: java weblogic.WLST
# connect to the adminserver
connect('adminusername','adminpassword');
# change to the serverruntime environment
serverRuntime();
# show the attributes
ls();
# Here an attribute is shown called WebLogicVersion that shows the version of WebLogic
-r-- WeblogicVersion WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638
# Note that this does not show if is 32 bits or 64 bits to retrieve this information you have obtain the JVM version
# change the directory
cd('JVMRuntime/AdminServer');
# show the attributes
ls();
-r-- Version R28.0.1-21-133393-1.6.0_20-20100512-2126-linux-x86_64
# when you have something like x86 at the you are running a 32 bit version, if you have something like x86_64 you are running a 64 bits versionAs mentioned above you can also retrieve this information by using a MBean browser.

Problems when installing the SAP Netweaver 2004s Trial version on Fedora 9

Dear all,
I have been trying to install the SAP Netweaver 2004s Trial version on Fedora 9, 64 bit, x86_64, but have not been able to accomplish this correctly.
New to the Linux environment as well, and hence not completely sure about the issues here. According to the steps outlined for the installation, i downloaded and installed the IBM Java SDK and then executed the install.sh script file from the download.
The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
Could anyone please guide.
Thanks,
Dabre

> The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
as which user did you execute that command?
Markus

Installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Prof

I have problem in installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Professional 9.1.
1. According to information of installation steps given by one user at DIZWELL for Centos 5.0.
In the last step it says as follows (I had bought a CD Centos 5.0) - It gives the following error. My copy of Centos is not a downloaded Zip file.
su - oracle
/osource/runinstaller -ignoreSysPrereqs
Command not found
I had also installed Libaio and Libxp as mentioned in the document given by a user. How can i solve this. I need the complete installation of Oracle 10 G Rel 2 on Centos 5.0.
2. Installation of Oracle 10 G Rel 2 on Novell SuSe Linux Professional 9.1.
I had seen the oui opening up and when it moves a little further it gives some memory error and It requires about 900 + memory. After installing this linux if we have increase the memory What should we do? According to the message it says my system is having only 700+ memory. I do not know whether it is MB/KB. Please given the complete steps to solve this.
Thanks in Advance!
Regards,
Srinivas

was trying to Oracle 10G Rel 2 on Centos 5.0 but There I never got the Oracle Universal Installer.
Now, I had made necessary to Novelll Suse Linux Professional 9.1, where I has made the necessary changes to the system files and installed the libXp, glibc, libaio, make etc and I was able to get Oracle Universal Installer. During Installation at the end I got these errors.
gcc-3.2 Found not found Failed
Overall Result of this check Failed
Kernel Parameters
Semopm=100 found semopm=32 Failed
file-max=65536 Found file-max=52249 Failed
Checking for VERSION-2.6.5-7.97 Found VERSION=2.6.4-52 - default Failed
ip_local_port_range=1024-65000 Found ip_local_port_range=32768-61000 Failed
Check for rmem_default=262144 Found rmem_default=111616 Failed
Check for rmem_max=262144 Found rmem_max-111616 Failed
Check for wmem_default=262144 Found wmem_default=111616 Failed
Check for wmem_max=262144 Found wmem_max=111616 Failed
Recommended glibc VERSION
Expected Atleast= 2.3.3-98.28
Actual = 2.3.3-97 Failed
Overall Result of the above Failed
Checking Physical Memory
Expected = 922 MB
Actual = 500 MB
Please let me know What to do or How to rectify this? Atleast I should be able to install the same in SuSe Linux Professional 9.1. Mine is not a zip file now . I have unzipped and stored my Oracle 10 G Rel 2 on a CD Which was working correctly in SuSe Linux Professional 9.1 but the last step in the Installation in Centos 5.0 did not show the OUI when I had run from the CD. Should I have to configure the Internet for lInux also. I have Broadband internet 256 kbps From hathway Internet. How can i configure Internet in SuSe Linux Professional 9.1, Centos 5.0 and Fedora Core 4. Where can I give my IP Address, Gateway, Primay DNS, Secondary DNS, Email ID and Password, Host Name etc
Somehow, I need to install Oracle 10 G Rel 2 on any one Linux Version for me to work and succeed.Anybody can Help me also.
AFTER RE-INSTALLING CENTOS LINUX 5.0 AGAIN, I HAD REPEATED ALL THE STEPS TAKEN FROM A MEMBER OF ORACLE FORUMS AND THIS TIME, WHEN I HAD GIVEN THE COMMANDS
su - oracle
/osource/runInstaller -ignoreSysPrereqs
THIS TIME IT HAD GIVEN THE ERROR AS FOLLOWS:
PERMISSION DENIED
PLEASE TELL ME WHAT SHOULD BE THE PROBLEM AND HOW TO RECTIFY THIS PROBLEM AND INSTALL ORACLE 10g REL 2 ON CENTOS 5.0 LINUX.
Thanks in Advance
Regards,
Srinivas

Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services

CFMX8 64 bit and SUSE SLES 10.2 64 bit glibc 2.4.31 any successfull install/production usage?

Greetings
CFMX expected version 8.01 64 bit.
OS: SUSE SLES 10.2 64 bit with glibc 2.4.31-*
Expected deployment: war under Application Server Container
, JDK 1.6.x
Previous Deployment CFMX 7.02 32 bit, war deployment, RHEL 3,
JDK 1.4.x
We are planning to migrate/upgrade to the CFMX8 64 bit
version but I have been reading that it requires glibc-2.5.25
RedHat 5 is not an option, we have SLES 10.2 64 bit OS which
has a supported version of glibc-2.4.31-*
I have read the following links on the web:
http://rachaelandtom.info/content/coldfusion-801-updater-64bit-linux-gotcha
http://www.talkingtree.com/blog/index.cfm/2008/5/5/ColdFusion-801-64bit-and-Supported-Linu x-Distros
http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:56889
Adding OpenSUSE RPMS's for glibc-2.5.25+ is not an option due
to other dependencies on the server configuration and what
potential problems that might cause.
Any options there besides separate 32 bit install under SLES
10.2 32 bit?
Any idea what features of the CFMX8 will cause "floating
point exception" as noted on above links.
Why particular glibc-2.5.25+ dependency on 64 bit OS for
CFMX8 where a latest major distribution of SUSE, SLES 10 is at
glibc 2.4.31.
By the way I did install as war (CFMX8 Dev. Edition) on SLES
10.2 and got to the CFMX admin interface, so this is not the part I
am asking about.
Thanks for any feedback on this issue.

Actually you don't need an EFI64 ROM to support 8 GBs of RAM. That is determined by the bus size and the memory controller. The ROM only determines the maximum amount of RAM that the OS can address. None of the Macs currently in production can support even the maximum supported by the 32-bit kernel. None have a wide enough memory bus. Of course newer models may support larger amounts of RAM when they are released, but for now there's not much need for using the 64-bit kernel except if you are developing 64-bit software and need to test its compatibility with the 64-bit ROM.

Windows phone 8.1 SDK want to install on WINDOWS 8.1 PRO 32bits...how can i ?

windows phone 8.1 SDK want to install on WINDOWS 8.1 PRO 32bits...how can i ?
is there any patch or any other version for windows 8.1 32 bits..to run win phone SDK..?

Hi,
According to the reference about Windows SDK, you should install it on a 64 bit system:
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff626524(v=vs.105).aspx
Regards
Wade Liu
TechNet Community Support

Central instance can not startup when i install the SAP /DB2 9 env

Hi,
could anybody help me?   I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been OK, Unfortunately , an
error occurs when I installed the CI.
the error message is that "ABAP Database db must be started on remote server " i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed" the detail informatioin ,please check the the following trans.log. but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password.
first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens. In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before. i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
First let me describe our cluster enviroment
For CI, and DI are not a Single point of failure , so the DI and CI
are out of cluster.     The cluster enviroment just includes the
SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
   1. Host name
sapaix01 : DB instance and DI (visual hostname dbae1)
sapaix02:   SCS,ASCS, CI        (visual hostname scsae1)
2. file systems (sapaix01 DB instance )
Sapaix01
Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
/dev/hd4         6291456   4792544   24%     2808     1% /
/dev/hd2        13107200   6175040   53%    73295    10% /usr
/dev/hd9var     13107200 12816904    3%     1336     1% /var
/dev/hd3        61603840 35610304   43%     3844     1% /tmp
/dev/fwdump       786432    785656    1%        4     1%
/var/adm/ras/platform
/dev/hd1         1048576   1016152    4%      213     1% /home
/proc                  -         -    -         -     - /proc
/dev/hd10opt     4194304   2512624   41%     6241     3% /opt
/dev/lvusrsapae1d10   41943040 41935984    1%        4     1%
/usr/sap/AE1/D10      (Local file system)
/dev/lvdb2ae1   20971520 20927640    1%       38     1% /db2/AE1
/dev/lvdb2logs   20971520 18346424   13%       25     1%
/db2/AE1/log_dir
/dev/lvdb2archive   41943040 41935984    1%        4     1%
/db2/AE1/log_archive
/dev/lvae1sapdata1 104857600 18817168   83%       47     1%
/db2/AE1/sapdata1
/dev/lvae1sapdata2 104857600 18817400   83%       48     1%
/db2/AE1/sapdata2
/dev/lvae1sapdata3 104857600 18817184   83%       48     1%
/db2/AE1/sapdata3
/dev/lvae1sapdata4 104857600 18817168   83%       48     1%
/db2/AE1/sapdata4
/dev/lvdb2db2ae1   20971520 19874760    6%     3931     1% /db2/db2ae1
/dev/lvae1saptemp   20971520 20967584    1%       12     1%
/db2/AE1/saptemp1
/dev/lvdb2db2as   10485760 10483504    1%        4     1% /db2/db2as
/dev/lvae1db2dump   10485760 10470600    1%        8     1%
/db2/AE1/db2dump
scsae1:/export/usr/sap/trans   20971520 20967592    1%       16     1%
/usr/sap/trans
scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
/sapmnt/AE1
10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
/software2
For the database version is 9.1 , so I installed the db2 software in
/db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1 (for DI)
on sapaix01, db2 client software in /opt/IBM/db2/V9.1 (I installed the
db software with virtual hostname dbae1 not sapaix01 )
sapaix02
Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
/dev/hd4         6291456   4915592   22%     2790     1% /
/dev/hd2        13107200   6177120   53%    73643    10% /usr
/dev/hd9var     13107200 12857456    2%     1311     1% /var
/dev/hd3        21495808 16955192   22%     3283     1% /tmp
/dev/fwdump       786432    785656    1%        4     1%
/var/adm/ras/platform
/dev/hd1         1048576   1046848    1%      105     1% /home
/proc                  -         -    -         -     - /proc
/dev/hd10opt     4194304   2197776   48%     9002     4% /opt
/dev/lvusrsapae1   20971520 20966872    1%       47     1% /usr/sap/AE1
/dev/lvae1ascs01   10485760 10243360    3%       86     1%
/usr/sap/AE1/ASCS01
/dev/lvae1scs00   20971520 20706584    2%       97     1%
/usr/sap/AE1/SCS00
/dev/lvsapmntae1   12582912   9886168   22%     1529     1%
/export/sapmnt/AE1
/dev/lvusrsaptrans   20971520 20967592    1%       16     1%
/export/usr/sap/trans
scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
/sapmnt/AE1
scsae1:/export/usr/sap/trans   20971520 20967592    1%       16     1%
/usr/sap/trans
10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
/software2
3. hosts file    the file is the same on sapaix01 and sapaix02
10.241.13.121   dbae1
10.241.13.125   scsae1
10.10.11.1      sapaix01_boot1
10.10.11.2      sapaix02_boot1
10.10.10.1      sapaix01_boot2
10.10.10.2      sapaix02_boot2
10.241.13.71    sapaix01 sapaix01_per
10.241.13.72     sapaix02 sapaix02_per
4. the installation guide and error message please check the attachment
<<installation_and errorlog.zip>>
5. I run db2ilist command nothing disppear
I have another questions
*      whether does DB2 9.1 support installation on the diffirence
directory (default is /opt/IBM/db2/V9.1 my installation is
/db2/db2ae1/V9)?
*      Whether does DB2 9 installation has some relationship with
hostname ?
*       Why db2ilist command result is nothing after I finished the
DB instance installation ?
trans.log
"trans.log" 143 lines, 14041 characters
4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 10.03.2008 - 20:25:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Mar 10 20:25:40 2008                              70 0.000070
4 ETW000 [dev trc     ,00000] db_con_init called                                    25 0.000095
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             42 0.000137
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
4 ETW000                                                                              60 0.000197
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
4 ETW000                                                                            1018 0.001215
4 ETW000 [dev trc     ,00000] Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
4 ETW000                                                                              39 0.001254
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000                                                                              43 0.001297
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
4 ETW000                                                                             282 0.001579
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000                                                                              42 0.001621
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000                                                                              43 0.001664
4 ETW000 [dev trc     ,00000] New connection 0 created                              29 0.001693
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              50 0.001743
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         41 0.001784
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              40 0.001824
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              47 0.001871
4 ETW000 [dev trc     ,00000] DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
cessfully loaded
4 ETW000                                                                            9175 0.011046
4 ETW000 [dev trc     ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000                                                                              42 0.011088
4 ETW000 [dev trc     ,00000] DB6 shared library (dbdb6slib) patchlevels            24 0.011112
4 ETW000 [dev trc     ,00000]    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000                                                                              42 0.011154
4 ETW000 [dev trc     ,00000]    (0.8) Support of SDBUPDEXCL (note 847616)           25 0.011179
4 ETW000 [dev trc     ,00000]    (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000                                                                              40 0.011219
4 ETW000 [dev trc     ,00000]    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000                                                                              39 0.011258
4 ETW000 [dev trc     ,00000]    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000                                                                              51 0.011309
4 ETW000 [dev trc     ,00000]    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000                                                                              40 0.011349
4 ETW000 [dev trc     ,00000]    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000                                                                              40 0.011389
4 ETW000 [dev trc     ,00000]    (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000                                                                              40 0.011429
4 ETW000 [dev trc     ,00000]    (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000                                                                              39 0.011468
4 ETW000 [dev trc     ,00000]    (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000                                                                              41 0.011509
4 ETW000 [dev trc     ,00000]    (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000                                                                              41 0.011550
4 ETW000 [dev trc     ,00000]    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000                                                                              40 0.011590
4 ETW000 [dev trc     ,00000]    (0.27) DB6: activate value compression (note 886231)
4 ETW000                                                                              40 0.011630
4 ETW000 [dev trc     ,00000]    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000                                                                              40 0.011670
4 ETW000 [dev trc     ,00000]    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000                                                                              40 0.011710
4 ETW000 [dev trc     ,00000]    (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000                                                                              39 0.011749
4 ETW000 [dev trc     ,00000]    (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000                                                                              41 0.011790
4 ETW000 [dev trc     ,00000]    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000                                                                              41 0.011831
4 ETW000 [dev trc     ,00000]    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000                                                                              41 0.011872
4 ETW000 [dev trc     ,00000]    (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000                                                                              41 0.011913
4 ETW000 [dev trc     ,00000]    (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000                                                                              41 0.011954
4 ETW000 [dev trc     ,00000]    (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000                                                                              39 0.011993
4 ETW000 [dev trc     ,00000]    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000                                                                              40 0.012033
4 ETW000 [dev trc     ,00000]    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000                                                                              40 0.012073
4 ETW000 [dev trc     ,00000]    (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000                                                                              41 0.012114
4 ETW000 [dev trc     ,00000]    (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000                                                                              47 0.012161
4 ETW000 [dev trc     ,00000]    (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000                                                                              39 0.012200
4 ETW000 [dev trc     ,00000]    (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000                                                                              40 0.012240
4 ETW000 [dev trc     ,00000]    (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000                                                                              39 0.012279
4 ETW000 [dev trc     ,00000]    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000                                                                              41 0.012320
4 ETW000 [dev trc     ,00000]    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000                                                                              41 0.012361
4 ETW000 [dev trc     ,00000]    (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000                                                                              39 0.012400
4 ETW000 [dev trc     ,00000]    (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000                                                                              41 0.012441
4 ETW000 [dev trc     ,00000]    (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000                                                                              41 0.012482
4 ETW000 [dev trc     ,00000]    (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000                                                                              41 0.012523
4 ETW000 [dev trc     ,00000]    (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000                                                                              41 0.012564
4 ETW000 [dev trc     ,00000]    (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000                                                                              41 0.012605
4 ETW000 [dev trc     ,00000]    (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
4 ETW000                                                                              40 0.012645
4 ETW000 [dev trc     ,00000]    (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
4 ETW000                                                                              40 0.012685
4 ETW000 [dev trc     ,00000]    (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
4 ETW000                                                                              41 0.012726
4 ETW000 [dev trc     ,00000]    (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
4 ETW000                                                                              42 0.012768
4 ETW000 [dev trc     ,00000]    (0.128) DB6: db6_free on invalid memory area (note 1092030)
4 ETW000                                                                              40 0.012808
4 ETW000 [dev trc     ,00000]    (0.133) DB6: statement cache enhancements (note 1101031)
4 ETW000                                                                              40 0.012848
4 ETW000 [dev trc     ,00000] Supported features:                                   24 0.012872
4 ETW000 [dev trc     ,00000] ..retrieving configuration parameters                 24 0.012896
4 ETW000 [dev trc     ,00000] ..done                                               126 0.013022
4 ETW000 [dev trc     ,00000] Running with UTF-8 Unicode                            25 0.013047
4 ETW000 [dev trc     ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000                                                                           67222 0.080269
4 ETW000 [dev trc     ,00000] &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed
with reason "24" ("USERNAME
4 ETW000                                                                              48 0.080317
4 ETW000 [dev trc     ,00000] &+     AND/OR PASSWORD INVALID"). SQLSTATE=08001
4 ETW000                                                                              45 0.080362
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              45 0.080407
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              46 0.080453
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              45 0.080498
4 ETW000 [dev trc     ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END)          26 0.080524
4 ETW000 [dbdb6.c     ,00000] *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
4 ETW000                                                                              71 0.080595
2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'AE1'"

Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

Error while installing the SAP J2EE add-on for SAP NW XI installation

Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
George

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

Install Error SAP NetWeaver 7.0 ABAP Trial Version SP12 - MaxDB SAP DB WWW

Hello everybody
I try to install the SAPNW7.0 and in the first run I forgot to install the MS Loopback Adapter.
And now every installation retry fails.
I read a lot of threads, and every time I do the reinstallation, I clean the system (XP Prof SP2) from the already installed files, incl regclean, SAP directory from install shield and so on.
The error I get all time time now has something to do with the existing service "SAP DB WWW ".
I see it when run the services.msc, but I don't know how do delete it. Deactivation will work but it will run into the same error.
Maybe another issue:
I can ping 10.10.0.10 but not the entered hostname in file host
I would appreciate any help on this issue.
Thanks
Thomas
log.txt
(Mar 11, 2008 9:05:34 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Mar 11, 2008 9:05:34 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/Fi/LOKALE1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/Fi/LOKALE1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
MaxDBSAPNWPREV.log
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: -rwxr-xr-x       303104 2006-07-06 19:24:41 pgm/wahttp.exe
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: -rwxr-xr-x       479232 2006-07-06 19:15:59 pgm/wapi.dll
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: -rwxr-xr-x       860160 2006-07-06 19:20:19 pgm/webdbm.dll
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:37 symbols/
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: -rw-rr      1756160 2006-07-06 19:24:40 symbols/wahttp.pdb
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: -rw-rr      2116608 2006-07-06 19:15:59 symbols/wapi.pdb
Tue Mar 11 21:05:33 CET 2008 MaxDB sdbinst: extracting: -rw-rr      3402752 2006-07-06 19:20:18 symbols/webdbm.pdb
Tue Mar 11 21:05:34 CET 2008 MaxDB sdbinst: checking unpacked archive... ok
Tue Mar 11 21:05:34 CET 2008 MaxDB sdbinst: error occured while executing wahttp -i
Tue Mar 11 21:05:34 CET 2008 MaxDB sdbinst: wahttp -i: SAP DB WWW service installation failed - Der angegebene Dienst ist bereits vorhanden. [1073]
Tue Mar 11 21:05:34 CET 2008 MaxDB sdbinst: installation exited abnormally at Tu, Mar 11, 2008 at 21:05:34
Tue Mar 11 21:05:34 CET 2008 MaxDB: Error during call to sdbinst, rc= 1
Tue Mar 11 21:05:34 CET 2008 MaxDB: Done with call_sdbinst
Tue Mar 11 21:05:34 CET 2008 MaxDB: rc of sdbinst = 1
Tue Mar 11 21:05:34 CET 2008 MaxDB: Start of CallSdbuninst
Tue Mar 11 21:05:34 CET 2008 MaxDB: IndepProgPath: C:/sapdb/programs
Tue Mar 11 21:05:34 CET 2008 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Tue Mar 11 21:05:34 CET 2008 MaxDB: Calling check for db_enum in case of an abort
Tue Mar 11 21:05:34 CET 2008 MaxDB: nsp doesn't exist. Nothing to do !
Tue Mar 11 21:05:34 CET 2008 MaxDB: rc of Method: 3
Tue Mar 11 21:05:34 CET 2008 MaxDB: IndepProgPath = C:/sapdb/programs
MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Mar 11 21:05:34 CET 2008 MaxDB: End of CallSdbuninst
Tue Mar 11 21:05:34 CET 2008 MaxDB: End of uninstallation

Hello Thomas,
I see it when run the services.msc, but I don't know how do delete it. Deactivation will work but it will run into the same error.
To delete the service please try the following command in the windows console:
sc delete <name of the service>
sc delete SAP DB WWW
The service has to be stopped and perhaps you have to restart your computer afterwards.
Maybe another issue:
I can ping 10.10.0.10 but not the entered hostname in file host
Please check the hosts-file under C:WINDOWSsystem32driversetc again.
Perhaps post your added entry here so that we can check it.
While installing please also deactivate all installed antivirus- or/and firewall-programs on your computer which could perhaps block a connection.
Hope it helps.
Regards,
Norman Schröder

Install of SAP on Linux -glibc-32bit-8.1-9 for Novell SUSE SLES Linux 10.

Similar Messages

Maybe you are looking for