Install of Win 7 will not continue.

Hello there,
I want to install Windows 7 via Boot Camp and using a MacbookPro (about 14 month old).
What I have here is the Install CD of Win 7, Mac OSX Snow Leopard and some Version of Bootcamp.
Here is the first problem, I can`t find the information what version of BootCamp I have. All system updating is done...
I read a few articels that say I need to have the 3.1 Update. So downloading it and finding an .exe file. Ok, read I have to install it in Windows.
So I need an update to install something but can only update after installing?
Downloading the BootCamp Version 3.0 is not possible, it seems not to exist, only updates.
But I tried to install. After the partition it starts with the win 7 disk in the CD-Case. Starting - New Windows - liscensing - and than choosing the path. So i choose the path of BOOTCAMP. But than I can`t go further, its not possible. The option to update is there, but nothing happens. The other option is drift, but it can`t find anything there. I even tried an extern drive where I put the Bootcamp update and the Mac OSX CD on it (as I can`t change a CD while the windows CD is inside), but that doesn`t change anything.
Does anyone have a clue and can help me?
Thanks a lot!

Re-read the guide in Boot Camp Assistant or pdf - it really is all there.
http://www.apple.com/support/bootcamp
That has links to downloads, tech support articles and more.
Just partition and boot from Windows 7 DVD (not CD)
When it asks where, the pdf guide tells you to select "BOOTCAMP" partition but also, Advanced Option to change it (format) to NTFS.
Don't worry about versions, just use your Mac OS as is, and when Windows is done installing then insert your OS X DVD and run SETUP.exe which will be BC 3.0. ONLY then can it be updated to 3.1 and finally to 3.2, either manually or through Windows Apple Software Update (part of BC 3.0).
YOU DO NOT NEED 3.1 - or, if you do, it is only that 3.0 came out before Windows 7 shipped (hence buggy).
At this point in time, those should be re-written, as you really need 3.2 update.

Similar Messages

  • I have a Mac OS X Version 10.4.11 and cannot install Mac OS X Snow Leopard. Install 'stalls' and will not continue. Help!

    After resisting an upgrade for the longest time, I had to purchase one to support my new iPhone 4, as my old version would not upgrade my iTunes. Now I cannot get the system to install. It 'stalls' and will not continue. I have tried 3 times [the definition of insanity: repeating the same behavior expecting different results] and each time I had to hard boot to even get the disk to pop out. Help!

    Hi there. Thanks for even looking at my question! I am brand new in the community. I finally just gave up and went to bed, leaving it running and my sister watching it. Of course, it did indeed finally install but my gosh! I have NEVER seen something take so long! Thanks again for the email. Linda w/a new OS!

  • When I try to install Flash, it stalls and will not continue

    When I try to install Flash, it stalls and will not continue.  What do I do?

    Mabel are you referring to Flash Player or Flash Professional?  Also what version are you trying to install?  Finally what operating system are you using?

  • I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

    I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
    I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
    The last version on iTunes on my PC was iTunes 7.
    Thanks for your help,
    Julia from Woodridge

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • My numbers application will not continue an update and will not open due to said incomplete update

    My numbers application will not continue an update and will not open due to said incomplete update

    open the application "LaunchPad" then locate Numbers.  Click and hold on Numbers until is starts to shake.  click the "X" in the top left corner.  click on the desktop to exit this mode.  Now open the App store and install again.

  • I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to be locked up on the 2nd song and will not continue to sync.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

    I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit. 

    When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
    After updating te ipod see if there is a change in results.
    PS: make sure the device is active while syncing so keep tapping the screen.
    Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

  • I have been transfering info to an external hard drive and when I try and trash contents off my computor i get the message it will not continue with the message SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free u

    I have been transfering photos and movies to an external hard drive and when I try and secure trash contents off my computor i get the message it will not continue In utilities  the message is: SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free up space on my computor. What can i do?

    Do not worry. It is probably a permission you should ignore, but you should check that the permission appears in this site > http://support.apple.com/kb/TS1448?viewlocale=en_US&locale=en_US

  • I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open?

    I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open. Not sure why this is happening

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back.  I tried re installing quicktime but it will not let me??

    I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back.  I tried re installing quicktime but it will not let me??

    Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
    http://support.apple.com/kb/dl923
    Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link  even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
    (Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

  • You sent me a notice letting me know that adobe forms central will not continue any more. What tool will replace it? How can I continue creating forms? Thanks for your responses.

    You sent me a notice letting me know that adobe forms central will not continue any more. What tool will replace it? How can I continue creating forms? Thanks for your responses.

    Hello Chalo,
    There are many FormsCentral alternatives. Our solution, JotForm, has the most complete Import Wizard both for your forms and for your response database.
    http://www.jotform.com/formscentral/

  • I have a disc for Photoshop CS-6 and entered the redemption code; system says I'm all set and a serial number is not needed. Install program on disc will not proceed without serial number.

    I have a disc for Photoshop CS-6 and entered the redemption code; system says I'm all set and a serial number is not needed. Install program on disc will not proceed without serial number. How do I resolved this Catch-22?

    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • I keep getting a download error message. I hit retry but tells me I can not download right now. I have been able to download other items. I think the download was interrupted and now it will not continue downloading. Help!

    What do I do when a download is interrupted and then will not continue to download?

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • After installing Mountain Lion, contacts will not sync

    After installing Mountain Lion, contacts will not sync to iphone 3G

    I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

  • Windows 7 pro lightroom 4 and 5 are locking up at start up. will not continue past the blue window

    windows 7 pro lightroom 4 and 5 are locking up at start up. will not continue past the blue window of lr5

    Hi,
    I would like to know if the backup program has been uninstalled?
    I suggest updating your graphic card driver from manufacturer's site and scanning the computer with your security software. Also test the issue in
    Clean Boot. If possible, try to reinstall problematic games.
    Best Regards,
    Niki
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I started to download OS X Maverick and then I paused download I went to resume download and now it will not continue downloading any advice

    I started to download OS X Maverick and then I paused download I went to resume download and now it will not continue downloading any advice

    First read Mac App Store: How to resume interrupted downloads
    Open the Mac App Store.
    From the Store menu, choose Sign In.
    Enter your Apple ID and password.
    Click Purchases to get to your Purchases Page.
    Click the Resume button next to the app name.
    Also read: Troubleshooting the Mac App Store

Maybe you are looking for

  • How to get a random number in a range?

    as title how to get a random number in a range? like 2000~3000 thks :)

  • How to activate Show Set Operations in Ad Hoc query

    When I go into ad hoc query using an infoset I created the Extras > Show Set Operations and Switch off object selection functions are greyed out and I cannot select them.  On another infoset these functions are available for selection. Is there some

  • How to add a system font without image render

    Please take a look at www.jumsoft.com website at the left bottom footer of their page. The text "Latest Tweets" is selectable . How can I use this kind of font with muse? Also how can I add a shadow effect to text as this website does it? Thank you

  • SpeedGrade doesn't show the videos on my sequence

    Everytime that I export via Direct Link from Pro to SpeedGrade, the process seems to happen without problems. But when I try to see the different clips on the sequence the screen just shows black. Is like the video wasn't transferred at all, because

  • Workflow Agent Listener and Workflow Background program run after each minute

    Hello, We have scheduled Workflow agent listener program to be run after 5 minutes but it runs every minute more than once and fills concurrent request queue. Please help. EBS 12.1.1, DB 11.1.0.7, Linux 5. Thanks & Regards Aneel Ahmed