Install officejet 4500 g510g-m

im trying to install the office jet 4500 all in one to my computer please help to install
This question was solved.
View Solution.

Wireless install is only possible with the G510n-z models of the Officejet 4500 series printer. I should be able to point you to the right software, if I know your OS, but you won't be able to set the printer up wirelessly. What OS are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

How long does it take to download and install full feature software for Officejet 4500 g510g-m?

I have been updating my software in hopes I can get my Officejet 4500 g510g-m to work wirelessly but the full feature software has been at the "installing software" stage for over an hour. Is this normal? Also, anyone know where I can find a step by step guide on setting up my printer for wireless use? Is it even possible?

The download speed is dependent on many things, but is often a factor of your Internet provider's service. If you are on basic DSL, then over an hour is not out of line. If you are on cable, something is wrong.
Try this for a guide: www.hp.com/go/wirelessprinting
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet 4500 g510g-m won't print

Officejet 4500 G510g-m; Windows 7 Pro 64bit; USB Connection; Unit worked great on my old computers running XP Pro 32bit; Bought new desktop and laptop-now same problem on both computers; I hope Shlomil is available. I am having the same problem outlined by zax5 on 2-14-14. I've downloaded and installed the full version software from hp, connecting the printer when instructed, but when I attempt to print, the printer indexes the blank sheet to the middle of the page (not the top??) and stops. The que initially shows the print job but after the paper indexes, the que says the jobs complete, but nothing printed and the page never indexes out of the printer. I am able to see ink levels. Fax works, don't know about scan yet. There is a patch referenced in the other post:
http://h10025.www1.hp.com/ewfrf/wc/document?product=3919449&lc=en&cc=us&docname=c03030583
but when I click on it I get an Error 404, Page not Found. I emptied the temp file, but it didn't help. Any ideas?

OK since my first message I've tried running the print & scan doctor, and hp printer diagnostic tool, following all instructions, cycling power on the printer, uninstalling, deleting temp file entries, doing selective startup, reinstalling, updating, everything I can think of, still to no avail. Upon completion of install, message says install completed successfully but when I try to print anything, the printer indexes the paper to the middle of the page (not the top??) and stops. Que says job pending until paper index, then indicates job complete, but nothing ever prints and the display on the unit continues to say "Printing". Does anyone have any suggestions? I'm at my end and thinking maybe its just time to buy a non-HP product to avoid the issue.

Officejet 4500 G510g-m | Windows 7 Driver Installation Problems

Hello!
I've just purchased a new Acer Aspire One 722 laptop running on Windows 7 64-bit for work and I'm having some problems getting it to play nice with the all-in-one at work. The model is an Officejet 4500 G510g-m and though I still have the CD, it seems to be of little help. Whenever I run any of the HP diagnostic tools, they attempt to download the full software suite (I assume, since it's the same 373MB package) and extract it, only to go back to step one of discovering the device and starting the download all over again.
I have tried running the Solution Center installer directly from the disk, at which point I get the 2732 error. I've uninstalled and reinstalled Flash to attempt to circumvent that error to no success. I have downloaded both the basic and the full driver suite from the HP site and attempted installation multiple times, using the scrubber in between to ensure a clean slate. I've copied the files from the CD to my computer and tried to install more directly, with exactly the same results, yet the printer continues to show up as problematic under the "Printers and Devices" window, troubleshooting which just returns me to the endless cycle of downloading a driver that seems to not want to install.
At this point, I haven't the faintest clue what's causing the problem, so I'd greatly appreciate any insights!
Thanks for your time in advance.

Hey Kyramor,
If you visit this link you can find the print and scan driver without the full feature software:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3919449&
This installation via this method.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

I can't seem to use the wireless connection to connect from my macpro to hp officejet 4500 g510g-m

Hi, I don't know how to connect my hp officejet 4500 g510g-m to my mac book pro. can anyone help me? i can't seem to find the ip address for the printer. this can be connected wireless right? it wasn't connected to the modem. it is okay?
Thanks in advance.

Hi,
The Officejet 4500 support ethernet connection only, using wired network connection.
Only the 4500 Wireless model provide wireless connectivity.
Please make sure to connect the printer to your router, then it should become available from the Mac.
For any further issue, please clarify what router you are using.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Able to send fax, but cannot receive fax... I have a HP Officejet 4500 G510g-m fax

Officejet 4500 G510g-m (fax)... I am able to send faxes out without a hitch, but cannot receive... When someone is trying to send me a fax, the machine rings and I can view the fax number but nothing comes thru ... I also made sure that "my device" had the correct device checked... any suggestions

Hello @Gibbs715,
Welcome to the HP forums.
I understand that you are having a problem receiving faxes.
I would like to help.
Double check that the 'Auto Answer' is turned on.
Press the Setup button () on the control panel of the product.
Press the Right Arrow button () to select Fax Settings, and then press OK.
Press the Right Arrow button () to select Answer Options, and then press OK.
Press the Right Arrow button () to select Auto Answer, and then press OK.
Press the Right Arrow button () to select On, and then press OK.
Have you ran a fax diagnostic test?
Load plain white paper into the tray.
Press the Setup button ().
Press the Right Arrow () to select Tools, and then press the OK button.
Press the Right Arrow () to select Run Fax Test, and then press the OK button. The product displays the status of the test and prints a report.
Also, if there is a voicemail service on your phone line, it could be intercepting the fax and preventing the 4500 form receiving the fax.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Officejet 4500 G510g windows 7 64 bit impossible to download working driver from HP

Hi
I am connecting to an HP officejet 4500 with no installation discs. I have been trying to download driver from HP . All the installations just advise tht it has stopped working. I have downloaded the correct drivers from HP website using Chrome and IE but same issues. It would appear that HP just do not have any "working drivers" available for this printer.
I am aware that I need to not have the usb cable attached when installing the driver. I have now tried installing same driver so many times now maybe I need to uninstal the previous driver instal attempts.
Either way, the HP printer ran out of warrenty Nov 2011 so I cannot chat direct to HP but guess could call them at a cost but just to get a working driver this should not be necessary.
The Product code of the printer appears to be CB867A.
Any advice much appreciated as otherwise it will have to go in the bin and never HP again.
Cheers
This question was solved.
View Solution.

Hi John,
First of all, click the start button and type %temp% within the search box.
Open the listed Temp folder.
Remove any of this folder's contrent by clicking CTRL + A and then the Delete key.
Any of this contect is a temporary content and can be deleted with no issues.
Next run the OJ4500vG510g_m_Full_13-en.exe once again.
Once the error appears again, run the patch as you listed on your previous post once again.
If it still points to the A-F folder, open the newly created HP folder within the same Temp folder, copy its path and paste it into the patch once it shows the installation path and check for any change.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet 4500 G510g

New printer has been connected to Window Vista for several months; no changes made to system.
Getting msg that Officejet 4500 series disconnected.
Ethernet cable is fully connected; have uninstalled and re-installed software.
Have run scan doctor which is showing Officejet 4500 series connected w/USB; will not connect.
Any suggestions on how to get this printer working?
Thanks in advance for all help. Thanks.

Hello OrchidSkys,
Welcome back to the HP Forums.
I see that you are having a connectivity issue with the printer.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable or the Ethernet cable from the printer and the computer and leave them off.
Click on the following link for the HP Officejet Software and Driver Removal Utility.
Once all the software and driver have been removed, please click on the next link for the HP Officejet J4500/J4600 All-in-One Printer series Full Feature Software and Driver. Save this download to your desktop so that it creates its own icon. Double click the icon and follow the instructions for the install. Please do not connect any cables until the installation prompts you to do so.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Installing Officejet 4500

Okay, so i bought my grandparents a new laptop. im having difficultes installing thier Printer(Officejet 4500). Near the end of every time i download the software i get a emessage saying download was canceled. im not sure if this is a network or compabatiblity issue.

kmoore1192
Welcome to the HP Forum.
It does not sound like you are getting to the point where it is software compatibility -- the download is not finishing.
Try a different browser?
Make sure the computer is not doing anything else...
Try downloading the software to your notebook, transfer to a USB stick and put it on their system...
Have a friend download the software?
Download the software to your OneCloud, iCloud, some-Cloud account...
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Officejet 4500 All-in-One Printer Series
Select your Printer from the “Results” list
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the printer’s website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, and alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Need 2 network my dsktop Win xp, HP Officejet 4500 G510g-m to my new laptop w/ windows 7 need help

just got new laptop with windows 7.. my desktop which has printer attached is windows xp
can't seem to get laptop to locate the printer. downloaded new drivers? but still doesn't work??
I am not a wiz at computers & need help

OK since my first message I've tried running the print & scan doctor, and hp printer diagnostic tool, following all instructions, cycling power on the printer, uninstalling, deleting temp file entries, doing selective startup, reinstalling, updating, everything I can think of, still to no avail. Upon completion of install, message says install completed successfully but when I try to print anything, the printer indexes the paper to the middle of the page (not the top??) and stops. Que says job pending until paper index, then indicates job complete, but nothing ever prints and the display on the unit continues to say "Printing". Does anyone have any suggestions? I'm at my end and thinking maybe its just time to buy a non-HP product to avoid the issue.

New Officejet 4500 will not connect wirelessly

We just got a new Officejet 4500 that I began to set up last night. First I followed the recommended setup path for setting it up wirelessly: USB connection to my MacBook Pro, install the software, use the setup wizard, etc. It chugged away for a while and eventually I got back a bunch of errors "Failed to retrieve IP".
I have a wireless hub provided by my ISP which I have set up with WEP (no Mac filtering, no special firewall within the home network). After googling around for a while I decided to switch to WPA personal. I got my MacBook working with that, then tried the printer wireless setup wizard again. No go, same errors.
Next I tried setting it up (still with WPA) directly on the printer using it's menus. This also didn't work. The printer printed out a Wireless Network Test Report which looked like this in the Diagnostics Summary:
Wireless On: PASS
Wireless Working: PASS
Network Name (SSID) Found: PASS
Security: PASS
Printer Settings Consistent with Wireless Router Settings: PASS
No Filtering: FAIL
Connected: Not Run
Signal Strength: Very Low
Other networks detected matching your network name (SSID): No
Downlink count: 2
Channel: Not Run
I also switch back to WEP and reran the setup via the printer menus, and failed the same way and got the exact same diagnostic summary.
What now?

Hello-
If you have a Officejet 4500 G510g , the printer is not wireless. You can use an ehternet cable and do a network install. That way any device that is wireless can use it as long as your on the same network.
The OJ 4500 G510n is wireless.
Specs :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01954185&tmp_task=prodinfoCategory&cc=us&dlc=en...
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Cb867A HP Officejet 4500 will not connect to network

I have tried over and over to connect my cb867A HP Officejet 4500 wireless printer, and it will not work. I have changed cables, triple checked everything, uninstalled and re-installed software, and I cannot get this printer to work as a wireless printer. I have a Windows 7 64 bit Compaq laptop. Any ideas on why this is not working? I am certain I am following the directions HP is giving. Thank you in advance for your help.

Hello-
If you have a Officejet 4500 G510g , the printer is not wireless. You can use an ehternet cable and do a network install. That way any device that is wireless can use it as long as your on the same network.
The OJ 4500 G510n is wireless.
Specs :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01954185&tmp_task=prodinfoCategory&cc=us&dlc=en...
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

OS 10.4.11 and HP Officejet 4500 compatibility issue (scanning)

Hi there,
I am having a compatibility issue with a G4 (OS 10.4.11) and a HP Officejet 4500 (all-in-one).
(Sorry if this is a little long, but there are many specs and many attempts listed here).
Problem: I cannot scan from the computer (upon opening HP Scan, a Browser Device window pops up, asking to "Choose a scanning device" the model is not listed, and it continues to search for a device but cannot find it) or from the scanner control panel to the computer (I tried selecting Open in HP Scan and Open in Preview from the panel –it then says on the panel "Starting scanning" but it doesn't scan even though the power button flashes (it then reverts to date and time), and the program it's opening in on the computer just seems to hang).
Still, some functions work fine:
- I can print from the computer to the printer (it recognizes the printer)
- The HP fax test seemed to run fine (via computer)
- As a stand-alone device (without the computer), I can photocopy in B&W and color –so there doesn't seem to be anything wrong with the scanner itself.
Here are the specs:
Computer specs:
- PowerPC G4, 933 MHz, 512 MB SDRAM, running OS 10.4.11 (no Intel Core processor)
(the hard drive is partitioned into 3 –one runs 10.4.11 (the others Jaguar and OS9 –for compatiblity with other programs/peripherals) –21GB space remaining on 10.4.11 partition
All-in-One specs:
- HP Officejet 4500 G510g-m (USB, not wireless) all-in-one (printer/scanner/fax/copier) with USB 2.0 high-speed A-B printer cable (says in literature and on box it is compatible with the G4 running OS 10.4.11, 256 MB RAM, 500 MB HD)
I contacted HP Tech Support. They suggested the following which were tried and failed to work:
- shutting everything down and restarting (many times)
- they checked to see if there was any update to the HP software –there didn't appear to be
- plug power cord directly into wall outlet
- switch to USB 2.0 cable (from 1.0)
- unplugging and replugging the USB 2.0 cable
- plug USB directly into the G4
- turning off the firewall (under System Preferences - Sharing)
- "scrub" or complete uninstall of all HP software (twice)
- search and removal of files via system and user libraries pertaining to HP (and some Epson files)
- verify and repair permissions (twice)
- reinstall of HP software (twice, second time after scrub/uninstall and verify/repair permissions)
- Software Update (via Apple menu) –only found Java 1.3.1 and 1.4.2 Release 2 (version 2.0) which they suggested might fix the problem –I downloaded and installed them, and then J2SE 5.0 Release 4 (version 4.0) which I downloaded but could not install (error message)
I then contacted Apple Tech Support and they said to go to support.apple.com and do a manual search for "HP 4500" –I did not find any drivers.
[I did previously have an Epson CX 4600 all-in-one which scanned fine with a USB 1.0 cable, even after the printheads had clogged shut –and I had had a HP Officejet J4580 which worked fine (which was for a family member) –this software would've been removed with the current HP installs and scrubs]
I am on the verge of returning this –it has also gotten several very bad reviews on the Apple site (for the wireless), however, I may have trouble finding a compatible device, as one running 10.4 is getting hard to find (unless I buy used, then no warranty and potentially other problems).
If anyone knows of any drivers or has any other information as to why this is not working, I would be most grateful (BTW, I am not much of a tech guy, so please bear with me).
Thanks.
Frazzled Macuser

Hey @Greenise,
Welcome to the HP Support Forums!
I would like to assist you today in getting the proper Full Feature Software and Driver package to install your HP Officejet 4500 Desktop All-in-One printer on your Mac OS X 10.4.11 Operating System.
Below is the link for the Full Feature Software and Driver Installer. Simply click on the link and select the 'Download' button in the top left hand corner. Once the download is complete just run through the on screen instructions to install your printer.
HP Officejet Full Feature Software and Driver (Universal) - Mac OS X 10.4,10.5 and 10.6.
Please let me know if this installer works for you and if you have any other questions. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

[SOLVED] Can't Scan with HP OfficeJet 4500

My cups says at http://localhost:631/printers/HP_Officejet_4500_G510g-m this:
HP_Officejet_4500_G510g-m
HP_Officejet_4500_G510g-m (Idle, Accepting Jobs, Not Shared)
Description: HP Officejet 4500 G510g-m
Location:
Driver: HP Officejet 4500 g510g-m hpijs, 3.14.10 (color, 2-sided printing)
Connection: usb://HP/Officejet%204500%20G510g-m?serial=CN21CG201N05CQ&interface=1
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
and it prints fine.
But I can't scan now. I could before. This is what I see in my terminal:
$ sudo hp-check
Saving output in log file: /home/kirk/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if
the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: arch distro is not found in AUTH_TYPES
warning: unknown- version is not supported. Using unknown-0 versions dependencies to verify and install...
| SYSTEM INFO |
Kernel: 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 GNU/Linux
Host: arch
Proc: 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 GNU/Linux
Distribution: unknown
Bitness: 64 bit
| HPLIP CONFIGURATION |
HPLIP-Version: HPLIP 3.14.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.10
html=/usr/share/doc/hplip-3.14.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.14.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
policykit Admin-Policy-framework OPTIONAL - 0.112 OK -
gs Ghostscript REQUIRED 7.05 9.15 OK -
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.8.10 OK -
cups CUPS REQUIRED 1.1 2.0.1 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.999 OK -
| General Dependencies |
error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
error: pil Python-Image-Lib OPTIONAL - - MISSING 'pil needs to be installed'
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.3 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.20 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 3.4.2 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.3 OK -
cups-devel CUPS-SDK REQUIRED - 2.0.1 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 2.0.1 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
| Compile Time Dependencies |
gcc gcc-Compiler REQUIRED - 4.9.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.1 OK -
| Python Extentions |
cupsext CUPS-Extension REQUIRED - 3.14.10 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.10 OK -
hpmudext IO-Extension REQUIRED - 3.14.10 OK -
| Scan Configuration |
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.10 OK -
| DISCOVERED SCANNER DEVICES |
/^Cerror: User exit
Done.
I kill it because it just hangs. The issue appears to be "reportlab needs to be installed" but I beleve I have all the packages installed:
$ sudo pacman -Qs pyth
local/cython 0.21.1-1
C-Extensions for Python
local/gnome-python 2.28.1-9
PyGNOME Python extension module
local/libftdi 1.2-1
A library to talk to FTDI chips, optional python bindings.
local/libreoffice-still-common 4.2.7-2 (libreoffice-still)
Common files for LibreOffice maintenance branch
local/pygtk 2.24.0-5
Python bindings for the GTK widget set
local/pygtksourceview2 2.10.1-5
Python bindings for gtksourceview2
local/pyorbit 2.24.0-5
Python bindings for ORBit2
local/pyqt4-common 4.11.3-1
Common PyQt files shared between python-pyqt4 and python2-pyqt4
local/python 3.4.2-1
Next generation of the python high-level scripting language
local/python-atspi 2.12.0-1
Python 3 bindings for at-spi
local/python-bsddb 6.0.1-3
Python interface for BerkeleyDB
local/python-cairo 1.10.0-4
Python bindings for the cairo graphics library
local/python-dbus 1.2.0-4
Python 3.3 bindings for DBUS
local/python-dbus-common 1.2.0-4
Common dbus-python files shared between python-dbus and python2-dbus
local/python-gobject 3.14.0-2
Python 3 bindings for GObject
local/python-pyqt4 4.11.3-1
A set of Python 3.x bindings for the Qt toolkit
local/python-reportlab 3.1.8-1
A proven industry-strength PDF generating solution
local/python-setuptools 1:7.0-1
Easily download, build, install, upgrade, and uninstall Python packages
local/python-sip 4.16.4-1
Python 3.x SIP bindings for C and C++ libraries
local/python-xdg 0.25-2
Python library to access freedesktop.org standards
local/python-xlib 0.15rc1-6
A fully functional X client library for Python programs
local/python2 2.7.8-2
A high-level scripting language
local/python2-beaker 1.6.4-2
Caching and sessions WSGI middleware for use with web applications and stand-alone Python scripts and applications
local/python2-bonobo 2.28.1-9
Python bindings for interacting with Bonobo
local/python2-boto 2.34.0-1
A Python interface to Amazon Web Services (AWS)
local/python2-bsddb 6.0.1-3
Python interface for BerkeleyDB
local/python2-cairo 1.10.0-2
Python2 bindings for the cairo graphics library
local/python2-crypto 2.6.1-2
Collection of cryptographic algorithms and protocols, implemented for use from Python 2.
local/python2-dbus 1.2.0-4
Python 2.7 bindings for DBUS
local/python2-distutils-extra 2.38-2
Enhancements to the Python build system
local/python2-ecdsa 0.11-2
Implementation of ECDSA in Python
local/python2-gconf 2.28.1-9
Python bindings for interacting with GConf
local/python2-gnomecanvas 2.28.1-9
Python bindings for the GNOME Canvas
local/python2-gnomekeyring 2.32.0-15
Python bindings for libgnome-keyring
local/python2-gnomevfs 2.28.1-9
Python bindings for interacting with gnome-vfs
local/python2-gnupginterface 0.3.2-2
A Python interface to GNU Privacy Guard (GnuPG).
local/python2-gobject 3.14.0-2
Python 2 bindings for GObject
local/python2-gobject2 2.28.6-11
Python 2 bindings for GObject2
local/python2-keybinder2 0.3.0-2
Library for registering global keyboard shortcuts - Python 2 bindings
local/python2-keyring 4.0-2
Store and access your passwords safely.
local/python2-libgnome 2.28.1-9
Python bindings for libgnome
local/python2-lockfile 0.10.2-1
Platform-independent file locking module
local/python2-mako 1.0.0-1
Hyperfast and lightweight templating for the Python2 platform
local/python2-markupsafe 0.23-1
Implements a XML/HTML/XHTML Markup safe string for Python
local/python2-notify 0.1.1-13
Python bindings for libnotify
local/python2-numpy 1.9.1-1
Scientific tools for Python
local/python2-paramiko 1.15.1-1
Python module that implements the SSH2 protocol
local/python2-pyqt4 4.11.3-1
A set of Python 2.x bindings for the Qt toolkit
local/python2-pysqlite 2.6.3-4
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
local/python2-sip 4.16.4-1
Python 2.x SIP bindings for C and C++ libraries
local/python2-wnck 2.32.0-15
Python bindings for libwnck
local/python2-xdg 0.25-2
Python library to access freedesktop.org standards
local/sip 4.16.4-1
A tool that makes it easy to create Python bindings for C and C++ libraries
local/wxpython 3.0.2.0-1
A wxWidgets GUI toolkit for Python
and I just reinstalled some and rebooted.
I am a bit lost as to what's wrong.
Last edited by CaptainKirk (2014-12-05 12:23:09)

In reality I couldn't print either. Not sure what really fixed it, but it seemed that adding hpoj from AUR and rebooting did it. I then readded the printer and now all works.

HP OfficeJet 4500 and MAC OSX 10.6.8 installation problem

I've recently bought a HP OfficeJet 4500 and I'm having problems with the Macintosh installation.
I'm on Intel Mac OS X 10.6.8 and I connected the printer to my iMac by using the USB cable.
The CD included with the printer is not readable, so I had to download the driver (OJ4500vG510a-f_Mac.dmg) from the HP website.
When I run the installer, the application is not able to recognize the device so no model is displayed in the list; then, I choose to continue the installation without specifying the model but when I have to do the configuration the installer is not able to find the correct device and so the setup procedure fails.
What I want is to use the printer wireless, so I think I should perform the configuration procedure and to specify that I want to use the Wi-Fi connection but I never reach this step because installer fails before.
I have to say that I successfully installed this printer on Windows XP and Windows 7 by downloading the drivers from the HP website and installing them without problems, but I'm not able to do the same thing with my Mac.
Can you help me, please?
What I have to do to get my printer work with my mac?

Hi,
I got the impression you are using the wrong software for your printer.
In order to get aligned, there are 3 sub models of the 4500 series:
HP Officejet 4500 Desktop (G510a) - Provide USB connectivity only. - The driver posted above intended for this model.
HP Officejet 4500 (G510g) - provide USB and Wired ethernet network connection
HP Officejet 4500 Wireless (G510n) - Provide USB and Wireless network connection,
As you mentioned the printer connected to the network, therefore I doubt if the correct driver has been used.
Above you may find a direct download link for both of the models
Simply click the model which identical to the one listed on the front of the printer,
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Install officejet 4500 g510g-m

Similar Messages

Maybe you are looking for