Install on 2 machines?

Hi,
I would like to install on my desktop and on a small notebook so I can do quick checks in the field.
Is this allowable?
Or does the on-line registration pick up the different machines?
Ron

Thanks chaps.
So... does it still work if it's not registered?
But if the license says you can install on 2 machines that's what I'll do.
Yes it's FCE I will be using.
Ron

Similar Messages

  • Can CS3.3 & CS4 Master play nice installed on same machine at same time?

    First off here are the specs on my desktop and laptop:
    Desktop:
    Mac Pro running OSX 10.5.6 - 2 x 3 GHz Dual-Core - 6 GB RAM - CS3.3 Master Collection currently installed
    Laptop:
    MacBook Pro running OSX 10.5.6 - 2.4 GHZ Intel Core 2 Duo - 2 GB RAM - CS3.3 Master Collection currently installed
    I recently received all the install discs for CS4. Spent the last hour researching how CS3 and CS4 play together when installed on same machine at same time. I haven't found anything that addresses my questions, thus the post.
    At present, not enough of my work colleagues have CS4, so if I install CS4 and uninstall CS3 - and need to pass a file on to someone who doesn't have CS4, they can't open it in CS3.
    Also, I use AfterEffects with many 3rd party plugins. Until I can verify that CS4 plays nice with these plugins, I can't afford to uninstall AfterEffects CS3. Obviously, I need to keep CS3 up and running on my desktop and laptop.
    But now that I have CS4 ready to install, I of course want to start using it and learning the new features.
    Has anyone successfully been able to install CS4 Master apps on a machine similar to either my desktop or laptop specs and have CS3.3 Master apps continue to work properly?
    I trust Adobe takes these types of version overlaps seriously and plans for them since people want to try out or start using the newest version but ensure there is a sufficient overlap period before uninstalling the older versions.
    Thanks for your comments
    jslicer

    j,
    Your old apps will work. But the new versions will be the defaults. You can touch your files to the old application to launch it or launch the old application first, and then open files "normally".
    If you need to ensure compatibility with older versions on other machines, don't delete the old apps. Or be prepared to save back to the old version before handing off the files. Note that InDesign cannot save back more than one version and in general, any features used that are new to the new apps will not be recognized when those files are saved back.
    Neil

  • Logic does not see my hd omni as an input device. Any ideas?  I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

    Logic does not see my hd omni as an input device. Any ideas?  I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

    I'm having the same issue with a file called IMG_2353.MOV that was imported into iPhoto from my iPhone and also have to manually select the items to import (so the rogue file doesn't error everything out). I've tried using Image Capture to locate/delete the file directly from my iPhone, but even though I can SEE it in Image Capture, I can't delete it or anything. This is VERY frustrating! My friend/Apple guru's only suggestion was to backup my phone then restore it through iTunes. Risky but should do the trick. I'm too scared to try, though!

  • Feb/Mar 2015 Update: OneDrive for Business Error "Incompatible Office products are installed on your machine."

    After Installing the Feb 2015 Updates for Office 2013 ProPlus via ClicktoRun, OneDrive no longer opens with the error message:
    "Sorry, we can’t perform this action. Incompatible Office products are installed on your machine. If you have an administrator, please contact them for help. "
    The eventviewer info is:
    - <System>
      <Provider Name="Microsoft Office 15 Alerts" />
      <EventID Qualifiers="0">300</EventID>
      <Level>4</Level>
      <Task>0</Task>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-02-11T17:08:53.000000000Z" />
      <EventRecordID>605</EventRecordID>
      <Channel>OAlerts</Channel>
      <Computer>BP-W-7DB824.raydon.com</Computer>
      <Security />
      </System>
    - <EventData>
      <Data>Microsoft OneDrive for Business</Data>
      <Data>Sorry, we can’t perform this action. Incompatible Office products are installed on your machine. If you have an administrator, please contact them for help.</Data>
      <Data>702089</Data>
      <Data>15.0.4693.1000</Data>
      <Data />
      <Data />
      </EventData>
      </Event>
    I have other office products on here including:
    SharePoint Designer 2010
    SharePoint Designer 2013
    Microsoft PowerBI Designer Preview
    and this is installed on Win 8.1 Enterprise
    Kind of stumped what is causing this... I see KB2920798  mentions this error message is now added when cant open a document due to a mix of click-to-run and MSI install for office.  I only have click to run for Office 2013 and the MSIs are only for
    addons in excel (power query) and the additional Microsoft Software...
    Anyone have ideas what is causing this and how to resolve?
    I just finished applying March 2015 C2R updated on Office and the same issue recurred.  This time I simply rebooted and it resolved.  My best guess is it has something to do with a locked file that can't be updated but the Office Update installer
    doesn't prompt to reboot.

    I have the same problem. But I have Czech versions of the Word and OneDrive for Business ("OneDrive pro firmy").
    I do not have the SharePoint Designer nor update KB2020798. I received KB2920746
    on 11th February (plus other updates for Office, but any other for OneDrive for Business). Anyway,
    uninstall of the KB2920746 doesn't help.
    The error in Czech:
    Microsoft Word
    Je nám líto, ale tuhle akci nemůžeme provést. Na počítači máte nainstalované nekompatibilní produkty Office. Pokud máte správce, požádejte ho o pomoc.
    P1: 702089
    P2: 15.0.4693.1000
    P3: 
    P4: 
    It helped me to unistall OneDrive for Business (Onedrive pro firmy) - displeasing solution,
    right?;-(

  • Snow leopard can't be installed on my machine.

    Alright, here goes. Thank you in advance.
    BACK STORY:
    I have an Intel iMac. I've had it for a few years and it's always been awesome. I was running Leopard, and it was all gravy. So much so, that I even took it in to my Apple store to see if there was anything I needed to do to protect my machine, or if there were any updates for my machine that I should purchase. Dude at genius bar said yea, there is an iLife update and a new version of OS, Snow Leopard. He told me he would update my macbook (which was getting a new hard drive put in) for me and show me how to do it, so that when I got home with my iMac, I could do the same update to it. iLife 11 and Snow Leopard installed perfectly on my Macbook (my secondary computer). I tried to installed Snow Leopard verbatim what the Apple associate showed me, with his written directions. Popped in my disc, selected English, install began, got about 1/3 of the way through the progress bar and an error message came up reading "Snow Leopard can't be installed on this machine". Interesting. Apple store guy said I was good to go?
    DIAGNOSIS FROM APPLE STORE:
    I took my iMac back to the apple store the next day, with my macbook incase I needed to run a firewire from iMac to Macbook to transfer files. Dude tried to save some of my data but couldn't access it. He told me there was a OS conflict and he was unable to archive and install. He gave me a card with all the information for a data recovery service and told me I was SOL. Great. I took my mac in to make sure it was good to update, he said yes, and then I did it, in turn frying my main computer into a useless paperweight.
    FUNCTIONALITY:
    When I try to turn on my iMac now, it goes to a grey screen with an apple and a spinning gear. This screen stays up for about 45 seconds and then the computer shuts off. I've connected a firewire to the iMac and my Macbook and held the T key down in an effort to save my photos and music etc. The firewire symbol comes up on the iMac, but nothing appears in my finder on my Macbook like an external hard drive would. If I put the Snow Leopard disc in, and hold the T key, the Snow Leopard disc will show up in my Macbook's finder/desktop. If I put the Snow Leopard disc in the iMac and boot it up the computer just shuts down, even if I hold the C key. If I boot with the Leopard disc and hold C, the disc will mount and I can re-install Leopard, but I get a warning that all of my data will be erased in doing so. Obviously I don't want to part with 200+ GB of data. My last back up was about a month before all this so it won't be the end of the world but there are photos and other things that are recent to my hard drive with no back up and that I'd rather not lose if I don't have to.
    BASIC INFORMATION:
    I'm 24 with a bachelors degree and I am very comfortable with my mac. AKA you don't have to reply like you're teaching your grandma how to email.
    My iMac IS an Intel iMac.
    I have 47 GB of free space on it, plenty of room for an OS update.
    Firewire ports are FW400 on both computers.
    I had to archive and install Leopard once about a year ago on my iMac. Not sure why there was issue, but the problem was fixed when I did this.
    So, do I have any options here besides erasing my hard drive? Has anyone ran into this before. Sorry for the rant. Thank you again.

    Attach an external hard drive to the iMac. Boot from the Snow Leopard disc again, launch Disk Utility, go into the Restore tab, select the internal drive as the source, select the external drive as the destination, and restore. Then partition -- do not merely erase -- the internal drive, and see whether you can install onto it. If you can, use Migration Assistant to restore your data from the backup.
    Not backing up = inevitable data loss.

  • If Mountain Lion comes pre-installed on my machine, how can I get the OS discs if it's only available via download?

    Had someone ask a very good question, I think.
    If you buy a new Mac that has Mountain Lion pre-installed on the machine, you are able to download updates as they come out; however, you can't necessarily download the Mountain Lion installer via the App Store since it came already installed on your computer.
    So my question is, how can you get a OS disk/drive of Mountain Lion if your computer fails? I know Apple has the Recovery drive, and even the Internet Recovery drive, along with Time Machine and whatever else, but what if none of these options are available to recover the computer?
    I suggested to the person to clone their hard drive using the 30-day trial of Carbon Copy Cloner. That way, they have a bootable image with the OS already available in case they run into this option. BUT, what if that isn't even an option? How does one go about recovering their computer if no OS disc of Mountain Lion is available?
    I haven't been able to find anything about workarounds besides the methods I mentioned above, so please tell me if I am missing something.

    you can't necessarily download the Mountain Lion installer via the App Store since it came already installed on your computer.
    Not true. You can go to the Mac App Store and download the installer
    (from the link that WALTER-MILANO-ITALY posted above)
    Install OS X Lion or OS X Mountain Lion
    If you completed your installation of OS X, your installer may have been removed after your successful first login to OS X Lion or OS X Mountain Lion.  Mac App Store's Purchases page should show Install OS X as being "Installed", and disallow its download, when viewed from a computer running OS X.
    To redownload the installer on a computer running OS X Lion or OS X Mountain Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install OS X Lion or OS X Mountain Lion item doesn't change to "Install" and allow you to download OS X, use Spotlight to search for "Install OS X Lion or OS X Mountain Lion" on your computer.

  • What ssd drive can i install in my machine

    This is my mac pro
    Model Name:
    Mac Pro
      Model Identifier:
    MacPro1,1
      Processor Name:
    Dual-Core Intel Xeon
      Processor Speed:
    3 GHz
      Number of Processors:
    2
      Total Number of Cores:
    4
      L2 Cache (per Processor):
    4 MB
      Memory:
    4 GB
      Bus Speed:
    1.33 GHz
      Boot ROM Version:
    MP11.005C.B08
      SMC Version (system):
    1.7f10
      what ssd drives would i beable to install in this machine, i need more speed but cantafford to buy a new mac.

    because 4GB RAM don't go that far with your system and with photos.
    Between the OS, other apps, your photo editing program, file sizes of photos, and the system needs free memory and cache.
    SSD helps when you are low on memory and to load apps.
    your photos should not be on the boot drive.
    4 x 2GB $110
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    SAMSUNG 830 SSD $145
    http://www.amazon.com/gp/product/B0077CR60Q/
    http://www.legitreviews.com/article/1804/1/ Corsair Series SSD GT vs Performance Pro
    High speed data drive for your photo library $200 (comes in 250GB and 1TB also)
    http://www.amazon.com/gp/product/B007VPGK42/
    1TB $117 vs $179 2TB
    http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B004CSIG1G/
    4GB isn't enough. I just bought the above RAM, that made a nice difference. I was using an SSD to begin with though. And your OEM ? graphic card too is probably long in the tooth.

  • If I have CS5 installed on one machine, do I need a new license to install on another machine?

    If I have CS5 installed on one machine, do I need a new license to install or transfer to another machine?

    No. Adobe apps can be installed and activated on 2 systems.
    Mylenium

  • How to know the latest version of SMO installed on my machine

    I have different versions of SMO installed on my machine. Is there any method to know the latest version of SMO installed through program?I mean is there any API or something like that for the purpose?
    For example, if the latest version of SMO is the SMO corresponding to SQL Server 2014, then i would like to receive the version something like "12.0.2000.8"
    Any help would be greatly appreciated...

    If you're checking for an installed component, then the best bet is to check the uninstall registry key.
    On my machine the key value for "Microsoft SQL Server 2012 Management Objects (x64)" is this:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{43A5C316-9521-49C3-B9B6-FCE5E1005DF0}
    There may be a different key entry for the 32bit version if you need that, but this is the way I always did software install checks when I was an SCCM admin.
    EDIT: As it seems that Microsoft change the uninstall key every version making it difficult to keep track of the installation this way, there is another key here which is probably a good one to check:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\SharedManagementObjects\CurrentVersion
    You could check the value of this to see if it's greater than 11 and if not (or it doesn't exist) do your install.

  • Java(TM) Update (1.4.2_02-b03) cannot be installed on this machine...

    I am able to install the 1.4.2_02-b03 JRE package on Windows 2000 Pro (SP4).
    However, the 1.4.2_02-b03 SDK package does not install: some way through the process (the file copy stage) a modal dialog is displayed ("Warning - Java(TM) Update
    Java(TM) Update (1.4.2_02-b03) cannot be installed on this machine because the Java(TM) Virtual Machine is currently running.
    Please close all running Java(TM) applications, especially browsers.
    Retry Cancel
    ---------------------------") and when Cancel is clicked, the main MSI installer program displays an Error 1722 modal dialog ("A program failed to execute blah blah...") and the MSI program announces installation has failed, nothing has been installed, and so on.
    The MSI log in the temp directory displays "Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action patchsdk, location: C:\Program Files\Common Files\Java\Update\Base Images\j2sdk1.4.2-b28\patch-j2sdk1.4.2_02-b03\patchsdk.exe, command: -s "C:\Programs\Java\SDK\"
    === Logging stopped: 06/11/2003 23:53:02 ===
    Examination of the installation directory (C:\Programs\Java\SDK in my case) shows that program files have been copied (and it looks complete), but the Java applet in the Control Panel does not show that the JRE in the SDK directory has been registered as a JRE choice (normally it is in the drop-down list of available JREs).
    So what can I do? Both 1.4.2_01 SDK and 1.4.2_02 SDK show this problem; 1.4.2 (FCS) does not. The problem also occurs with the IFTW installers.

    I think I found a <fix> for this. I was having the exact same problems on 10 different WinXP and Win2k machines. I found a couple things may help on some systems. Try installing the following updates:
    WinXP: http://support.microsoft.com/default.aspx?kbid=322913
    Win2k: http://www.microsoft.com/windows2000/downloads/recommended/q322913/default.asp
    You may have better luck installing 1.4.2 after installing these patches. I did on SOME systems. Otherwise, when installing 1.4.2 and you come to the point where it asks you to "Retry" or "Cancel" just keep on clicking on "Retry" until it installs successfully. Sometimes this may take 50 times sometimes once. But it will install.
    Sometimes I found that if I opened taskmanager, then close it, clicking Retry would work after that point.
    The moral is: Just keep clicking Retry!

  • Connecting to SAP from VB. Is it MUST to have SAP installed in the machine?

    Hi All,
    I have a requirement to connect to SAP from VB. I did it by creating an RFC and a Bapi for that. Now, I could execute the SAP function from VB based application. I have no issues so far.
    But, when I try to execute the same from the system which doesn't have SAP installed in it, it couldn't execute. Is it MUST to have SAP installed in the machine to execute the SAP function from VB..? or is there any otherway to avoid this problem. Is there any way to execute the SAP function from VB from the machine which doesn't have SAP installed in it.
    Please give me your valuable inputs. Thanks in advance,
    Thanks & Regards,
    Pradeep.

    Hi,
    No need of SAP environment to execute, but you should provide all the necessary parameters in your application in order to execute the RFC function module like: target host, m/c no, and etc of the SAP server.
    best regards
    Mahesh

  • "Mac OS X Server 10.6 cannot be installed on this machine"

    Hello,
    I got this message "Mac OS X Server 10.6 cannot be installed on this machine" when i was trying to install the Mac os x server on a Macbook Pro. The Macbook pro has 4GB memory and a intel 2.2 Ghz Intel core 2 Duo.
    I understand that the min requirements was an intel processor and 2GB RAM?
    So anybody know why it won't install on my macbook pro?
    TIA

    It's not officially supported, but it will install. That's probably not the problem here.
    FWIW, Last time I tried this with SLS, the install balked, and I didn't bother wiping the disk to install it.

  • "10.4 cannot be installed on this machine?"

    I'm currently running 10.4.7 on my macbookpro. To make a long story short, I was partitioning my hard drive using bootcamp when I get the error message saying basically, "can't verify hard disk. run off your installation cd and repair disk."
    I get into problems when I try to run off my tiger CD. I have a total of three tiger CDs of different versions (10.4 retail, 10.4.6 that came with my MBP, and a 10.4.7 version that was mailed to me from ADC). I've tried them all, and each time I get the message, "MAC OSx cannot be installed on this machine."
    I can't restart holding C either. Anybody know what's going on? Thanks in advance.

    Hi Horn,
    the problems are evident for the 10.4 retail: There is no retail version of Tiger for Intel Macs. Retail versions are PPC only. Also check the 10.4.7 DVD. It might be a PPC-version as well.
    However, you SHOULD be able to boot from the software restore DVD that came with your MBP, so calling AppleCare is definitely a good idea.

  • Beta or prerelease versions of Creative Suite 5 Master Collection are installed on the machine

    Hi,
    I try to re install the CS5 master collection that I have but this message appear :
    Beta or prerelease versions of Creative Suite 5 Master Collection are installed on the machine, and must be uninstalled before this installation can proceed. Please uninstall these products, restart your computer, then run this installer again.
    I erase all that is link to Cs5 but I think something still there.
    Can someone help me ?
    Thanks a lot
    Roch

    Ok will you can try running the uninstaller which is located in Applications/Utilities/Adobe Installer.  It may not function due to the method you utilized to remove the software.  If you still have problems then you can try running the CS5 Cleanup Script - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  • Can flash media live encoder feed stream to remote adobe media server installed on other machine?

    Hi All,
    i have installed  Flash Media Live Encoder 3.2 on my one machine xxx and AMS version 5 on another machine yyy.
    i am trying to configure FMLE for ams server URL - i.e. stream to flash media server option on FMLE. I have generated FMS URL as "rtmp://yyy/live" and clicked "connect" to. Its not getting connected to it.
    please find attachment for error.
    is there any restriction that our AMS should be on same machine wehere we have installed flash media live encoder ??
    please help on this!!

    If you have any trouble to understand from above query then please go through following scenarios and do reply if you have answers to it.
    I have installed Flash Media Live Encoder 3.2 on my machine and Adobe Media Server 5.0.3 on another machine.
    My requirement is to stream RTMP from Flash Media Live Encoder which is installed on my machine(source) and receive RTMP stream on Adobe Media Server which is installed on another machine.
    I am unable to connect to "rtmp://<"IP Address of Adobe Media Server installed system">/live on AMS installed machine.
    Atached please find the error message screen shot:
    Are there any restriction that Adobe Media Server and Flash Media Live Encoder must be installed on the same machine?

  • Generating a list of programs installed on a machine

    Hello,
    I am working on a project at the minute, and I need to find out, is it possible to create a list of all the programs installed on a machine using java?
    Thanks

    For what purpose one would ask.
    One can do a directory scan (File.listFiles).
    In java you can ask for the root drives (see FileSystemView, JFileChooser), and query whether they a removable/remote media.
    Then you simply need to collect all .exe files (on Windows).
    Windows uses the registry for software products. There are some native-code based APIs that give access to the registry. Or you might in RegEdit export a CURRENT_SOFTWARE tree from the registry and parse the text file..
    As you can execute command line programs in java (Runtime.exec) you can run RegEdit,
    see http://techsupt.winbatch.com/TS/T000001029F18.html for options.

Maybe you are looking for