Install on Mac and Windows?

I need to install photoshop which i have installed on a windows based program on to my macbook. How do I get this done

Hi north by northwest,
Please refer the article: http://helpx.adobe.com/creative-cloud/help/install-apps.html.
Regards,
Romit Sinha

Similar Messages

  • Unable to install Boot Camp and Windows 8.1 on Mac Mini

    Hello,
    My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
    I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
    I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I  settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
    I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
    My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
    Thanks,
    Doug

    Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
    Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
    I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
    So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • My Bluetooth disappeared from my MacBook. How do I reinstall? That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windo

    My Bluetooth disappeared from my MacBook. How do I reinstall?
    That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windows 2011 with the same key? Why does the snow leopard has not fixed the bluetooth?

    Download and install this update combo. This update combo for Snow Leopard can bring any version of Snow Leo up to 10.6.8 with the lastest version of App Store for Snow Leo.
    OS X Snow Leopard 10.6.8 v1.1 update combo
    http://support.apple.com/kb/DL1399

  • Adobe Lightroom 4 for Mac and Windows, can I install the same license on both systems or only 1?

    I just purchased 1 full license of Adobe Lightroom 4 and I can see there's an installer for Mac and Windows.
    does it mean I can install on both systems or my license is only valid for 1?
    Thank you
    BR,
    Lucia

    Yes, LR is cross-platform and you can install it on both systems.
    Mylenium

  • Can i instal cc on both my mac and windows laptop?

    can i instal cc on both my mac and windows laptop?

    Hi Aephoto,
    Yes, you can install and activate Creative Cloud desktop applications only on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership.
    For more info please refer to http://www.adobe.com/products/creativecloud/faq.html
    Thanks!
    Eshant

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • Install CS5 on both Mac and Windows

    Hi all,
    I have an Adobe CS5 Design premium which I have been using for 2 years now. Recently, I switched to a Macbook Pro with Bootcamp, which allows me to dual-boot to Windows. Does my CS5 license allow me to dual-install on BOTH Mac and Windows OSes on the same laptop (technically, I am not installing on separate machines). If yes, how do I do so? It seems like my installation DVD is for Windows only.
    Appreciate any clarifications. Thanks.
    Wayne

    Your serial number is only good for Windows, as well as the version of the software that goes with it.

  • How do I use an external hard drive on Mac and Windows?

    How do I format an external HD for use on Mac and Windows? She has two laptops and have to use both.

    format the external for Mac and use MacDrive or HFS+ for Windows on the windows side.
    use the FAT32 format and live with the "4-GB-per-file" limit
    format the drive NTFS and install e.g. the NTFS 3G driver on the Mac.

  • Mac and Windows on same iTunes Library? NAS?

    I moved my mac iTunes library to a NAS, hoping that all machines in the house (Mac and Windows) could access and update the library (but not at the same time because of file locking).  So I moved the .itl and .xml files over to the NAS as well but some machines can only see parts of the library.
    Is this not a supported configuration?  How could I set up such a sharing library with update capability?  Thanks in advance.

    You don't need any software installed on the windows PC. Just plug it into the Ethernet port on the router to the Ethernet port on the NIC card. If you want the Fios software installed go to activatemyfios.verizon.net and click configure another computer and enter your fios user name and password. If you are having connection problems go to verizon.com/connectionwizard and install that software.

  • Creative Cloud both on Mac and Windows on a second computer

    Is it possible to use Creative Cloud both on Mac and Windows on a second computer with one license? At home I work with Mac, and out I work with Windows.

    In 2.1.5 of the Software License Agreement it says that you have to own tow separate licenses if you use Mac and Windows on one computer. Is this not also the case if you have two computers, one operating with Mac and one operating with Windows?
    2.1.5 Dual Boot Platform. The Software is licensed for use on a specific operating system platform. Customer
    must purchase a separate license for use of the Software on each operating system platform. By way of example,
    if Customer desires to install the Software on both the Mac OS and Windows operating system platforms on a
    device that runs both of those platforms (i.e., a dual boot machine), then Customer must first obtain two separate
    licenses for the Software. This is true even if two versions of the Software, each designed for a different operating
    system platform, are delivered to Customer on the same media.

  • External hard drive use with both Mac and Windows

    I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

    Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
    (9844)

  • 1 hd with 2 file formats for use between mac and windows?

    Think this is the right forum...
    I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
    My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
    This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
    Thanks.

    An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
    Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

  • 5g with Mac and Windows?

    Can I use my 5g ipod with both a Mac and Windows PC? I've been syncing with my Mac but I also have a PC. I downloaded the Ipod updater for Windows XP and installed it. When I connect my Ipod I receive a message that the Ipod cannnot be read and needs to be formatted. Will this formatting erase all data and not allow syncing with the Mac? Thank You,
    Charles

    Hi Charles, welcome to Discussions. You will need to reformat the iPod with Windows, then it work with the Mac. A Mac formatted iPod will not work with Windows. When it is formatted via the PC, you can resynch with the Mac, to upload your data. After this, set synch to manual, so you can use both computers.

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

Maybe you are looking for