Install on Mac osx 10.5.8

Please send me a version of Thunder bird that will install on my Mac
why is there no link to older virsions?

If the Mac has an Intel processor, [https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/16.0.2/mac/ TB 16] is the last compatible version.
If it has a PPC processor, use [https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/3.1.20/mac/ TB 3] or [http://en.sourceforge.jp/projects/tenfourbird/ Tenfourbird].

Similar Messages

How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

Elements 4 crashing immediately after install on mac OSX 10.4.11, can anyone help ?

I have an infuriating problem with Elements 4 crashing immediately after an install on mac OSX 10.4.11, can anyone help ?
I was given the computer, which still had Elements 4 on it although it always crashed on opening, i removed the program and bought a 2nd hand hard copy of Elements 4 from eBay.
When i install the new copy it opens up with the "credits" but at the bottom right it still shows the past owners name as licensee briefly, then crashes before fully opening.
Does anyone know what is going on? I know it's an old version but i find elements4 perfect for my needs
Thankyou for reading.
Simon

More information needed. Are you saying you're just running the computer from the PO's user account? I would very strongly recommend erasing the disk and starting over with a fresh install of OS X for a number of reasons.

Dreamweaver 8 install on Mac OSX 10.6 Snow Leopard

Hi all,
I have just done a fresh install of Mac OSx Snow Leopard (10.6) and am trying to install our copy of Dreamweaver 8 onto it. However I have now run into a few problems. Firstly it came up with an error message stating that some old format is no longer supported or something. I cant get the error message back up now, as now the CD will not mount within OSx!
Can anyone assist with this? Thanks.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

CS6 Acrobat install error - Mac OSX 10.8.2

Just purchase CS6 and attempted to install in on my Mac OSX 10.8.2. All went well accept for when I installed Acrobat. It errored out
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat X Pro : Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 0] Sat Dec 15 15:21:56 2012 INFO
Exit Code: 6 - Silent workflow completed with errors.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW006, DW050 ...
When I went to run Acrobat it loaded fine even though the install errored out. When I went to perform an upgrade it also threw an error stating that the install had been altered and therefor it couldn't install the upgrade. I've tried to uninstall and reinstall and it continues to do the same thing. Any ideas? Very frustrating...

Hi All
First of all I have to say that for the amount of money spent on a software product Adobe's level of support is simple unacceptable. After spending many hr's on the phone and over 6 calls I gavce up. Each call the technician started from scratch in trouble shooting and did not even read the ticket info to see what was previously tried. The last couple of calls after 3 hrs on the phone each time, I was informed that this would be escalated to second and then thrid level support. Each time I was called back a week later where they left a msg to call back. When I called back the first person I talked to was the person again who attempted to trouble shoot the issue and the problem was never escalated So in the end after about more then 20hrs on the phone, 6 or 7 repeated occasions on the phone with tech support not including the ones where I called and sat on hold for over an hr and gave up, I simply gave up on their support. Unfortunately this left me with the only option of completely reinstalling OSX.

Adobe Flash v 11.700.225 install on Mac OSx 10.8 issues

Installing Flash v11 on Mac OSx 10.8, installation gets to 50% and stops with "Error: General Installation error", please help.

DITTO...!
After this : "
How to perform a "clean install" of Flash Player in Mac OS X
I got this message :
Geez, what's the problem here...?

CC Apps showing not installed on Mac OSX 10.8.4

Can't seem to find a solution for this – when viewing the CreativeCloud menu under Apps, it says 'You have not installed any applications yet" They were showing up a couple of weeks ago, but now shows not installed. I've installed the new AAM and restarted the Creative Cloud, no change. What I did notice is that some apps updated using AAM instead of the CC. I would rather not download the entire suite again to make this work – any help here?

@mishmedia, the above solution is meant for Mac OSX.
Widows 7 and 8 (64 bit):
Rename OOBE to OOBE_old (it's in C:\Program Files (x86)\Common Files\Adobe.)
Relaunch the browser.
Go to https://creative.adobe.com/products/creative-cloud.
Sign in with your Adobe ID and password and download the CC Desktop App.
Windows 7 and 8 (32 bit):
Rename OOBE to OOBE_old (it's in C:\Program Files\Common Files\Adobe).
Relaunch the browser.
Go to https://creative.adobe.com/products/creative-cloud
Sign in with your Adobe ID and password and download the CC Desktop App.

Why does FlashPlayer not install in Mac OSX Snow Leopard?

I've downloaded FlashPlayer for Mac OS, and the entire install process is completed successfully. But I do not have FlashPlayer capability, and I cannot find FlashPlayer on my hard drive. I've downloaded all of the recent updates for Mac OSX Snow Leopard, have closed all programs, shut down and restarted--nothing works. After a supposedly "successful" installation, I don't have FlashPlayer. What's up?

ADE does not recognize Sony devices on the Mac. You'll need to use the Sony software instead.

PSE 10 not installing on Mac OSX 10.7.2

I recently bought a new IMac and also got Photoshop Elements 10 for it
Now I did the software update for the IMac and now I have Mac OSX 10.7.2
Today I tried to install PSE10 but there wasn't even any installwindow showing up on my screen
After searching through the forum I still don' have any clue
I installed adobe support advisor but it didn't find any problems
what shall I do now?

Hi Christina_F,
Follow these steps and then try installing the application:
1. In the Finder, choose "Go" from the menubar and then select "Utilities". A new Finder window should open.
2. Locate and run Activity Monitor.
This will provide a listing of all running processes on your Mac.
3. Look for ShellExtLoader in the list. Select it and quit the process.
Reinstall the software from the disc.
Do let us know if you continue to face issues installing.
Thanks

GPIB-ENET/100, NI-488.2 fails to be properly installed on Mac OSX.

I am trying to install a new GPIB-ENET/100 on my Mac iBook 600 MHz 384 MB running Mac OSX 10.3.2. The GPIB-ENET/100 will eventually be used with LabVIEW 7.0. After running the installation procedure, IP 192.168.0.12 is assigned to the GPIB-ENET/100 device. When I then run the Trouble Shooting Wizard the first two steps are passed but the third, "GPIB Interfacees Sequentially Verified" fails. I am instructed to click on the interface in the associated list to get help but the whole help system is dead in this installation. The firmware is B9.
The device does not seem to work from LabVIEW either.
Any help would be very much appreciated.
Lars Hellberg, Chalmers U. of Technology, Sweden

Scott,
Thank you for your response.
I am pleased to say that everything (except the 488.2 help) works now. The road here was not all straight however and strange things happen.
Firstly the "Troubleshooting Wizard" reports, even when the ethernet cable is REMOVED (as a test), that:
1) NI-488.2 Software Presence Verified-PASS (Seems ok to me)
2) GBIB Hardware Presence Verified-PASS (??????????? very odd to me)
3) GPIB Interfaces Sequentially Verified-FAIL
This is what made me look in the wrong direction as, to me, the test seemed to say that the GPIB-ENET/100 "box" was actually detected and the IP number settings was ok (my cable was NOT disconnected when I wrote the first time). Now I (think) I know that my problem was associated with incomplet
e IP-number settings in terms of "Sub net mask", "Gate way" and "DNS server" which caused the comunication to fail. This problem is related to my incompetence in the science of IP.
Secondly, now I know that the "Explore GPIB" program works equally well independent on whether or not the ethernet cable is connected. This further contributed confusion and added to the impression that the GPIB-ENET/100 "box" was actually detected and communicated with.
To sum up, if you are not using DHCP you have to be very careful with ALL the IP settings.
As far as the dead help function in all the NI-488.2 programs is concerned I have no clue at the moment but I will look in to it at a later time.
Regards
Lars
P.S.
"Sometimes, having a GPIB Instrument connected to your GPIB interface can cause the Sequentially Verified step to fail."
This doesn't seem to give me any promlems.
D.S

I want to clean install my MAC OSX. Do I need to deactivate CC first?

If I do a clean install of my Mac OSX I will reformat my hard drive and thus lose my apps. Do I need to deactivate Adobe CC first? I have only one other computer with CC installed.
Thanks for any guidance.
Tim

Paul,
My intention is not to clean reinstall Adobe CC, but my OSX operating system, which will reformat my HD. I will then reinstall ALL my apps including CC, which I expect to be straightforward. The question was really about deactivation.
Thank for the reply, though.
Tim

Oracle 9i Client Install on Mac OSX

Is there a way to just install the Oracle client on Mac OSX 10.2.7 (not OS X Server)?
I downloaded the 9.2 Mac installer, but everything I've seen/read shows this installation will install the DB server and set up a database.
If anyone knows, please let me know... I'm just looking to connect (through PHP CLI) to a Oracle DB within our corporation. Thanks.

Hi,
Checkout MacSQL on www.rtlabs.com, there is info on installing Oracle OCI client and a link to the client only software.
HTH
Koen

Dell 2130cn leftover from PC life--hot to install for Mac OSX 10.6.5?

I have this Dell color laser printer. Since I switched to Mac last year I have been unable to install for Mac. Read the threads about downloading Ghostscript and Foomatic etc., but still can't INSTALL the stupid printer, much less get it to print anything.
Is there a DUMMY'S GUIDE to INSTALLING and SETTING UP this stupid printer? Else I'll just put it out on the street and hope somebody takes it away.
Thanks.

Pier Rodelon wrote:
Is the sequence important/essential?
Should I have rebooted after the uninstall?
The sequence of installing the packages makes no difference. You do not have to reboot after the installation of the printing software.
I cannot say why you were getting the error message. I would have to see the CUPS error_log. If you are indeed running 10.6.x (you are posting in the forum for 10.5.x) then the foomatic error should have caused about 50 lines of debugging information to be logged. You can see the error_log by using a browser and going to http://127.0.0.1:631/admin/log/error_log?
Please note that the error message you are getting does not mean that the drivers will not work with your printer. Usually the type of message you are getting is during processing of the print file and before it is sent to the printer.

Install on Mac osx 10.5.8

Similar Messages

Maybe you are looking for