Install on Mac
Trying to install on my new mac, and it keeps taking me through the download process when i click the desktop icon and cannot find anywhere else on the computer. anyone been through this?
Install what? You need to be a lot more specific.
Mylenium
Similar Messages
-
Safari won't quit, so I can't install Office Mac.
Hey guys. I got my new Office Mac, and I was hoping to install it. It said Firefox and Safari needed to close. Firefox was a snap (good job guys!), but Safari is doing HORRIBLE. It is not forcing to quit at all, and I don't want to restart or shut down (I bet it wouldn't work.) Now, according to THIS issue... I can't install my Mac Office 2011, and THAT on the other hand stinks, because I need it for school projects.
Is anyone willing to offer advice??? Thanks!!!
~AppleFan17You say even force quitting won't work? When Safari is open hold down Option + ⌘ + Q.
-
I recently purchased an iMac to replace my 2008 macbook.
I used migration assitant to transfer all of my macbook files to the iMac. I noticed that I had the old 2008 version of Office:mac 2008 on the iMac and decided to install Office:mac 2011 which installed successfully.
However, now I can't open excel or word or powwerpoint now using either 2008 or 2011.... I just get an error message saying there was an error and the app had to close. It offers to send a report to Microsoft.
I tried moving Office:mac 2008 to trash but this didn't resolve the issue.
Can anyone help (I am not a really sohpisticated user so be gentle)
Thanks DaveHello Dave,
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums -
I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Blue Scorpio 500 GB. When i tried to install the MAC OS, it identifies a hard drive with 3.6 TB and i'm not able to do the installation. I touhgt the new ard drive was bad but i was able to install windows XP. Any ideas what do i have to do?
Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty. -
How to convert an ipod with Windows software installed to Mac operation
I have a 20MB ipod which has windows software on it. It is very hard to load songs onto as I can only see the ICON on the desktop and not in itunes and this way they don't seem to properly mount! I have a 12" ibook that I connect it to. I can't seem to follow how one is supposed to wipe the Windows OS (or whatever) off the ipod and install the Mac one ?!?!? Am I trying to do the impossible? A step-by-step answer would be soooooo appreciated.
12" ibook Mac OS X (10.4.2)Information on the iPod not appearing in iTunes is available in this article. To reformat the iPod for Mac, open a new Finder window and click the Applications icon in the sidebar; from here, open Utilities and then iPod Software Updater. Locate the most recent version of the iPod updater inside, open it, and click the Restore button with the iPod connected. Doing this will change the iPod into the Mac format and erase everything currently on it.
(10717) -
working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic by inserting the tech tool DVD, wich produces the following highligted text:
panic(cpu 0 caller =xffff0003): 0x300 - Data access
latest stack backtrace for CPU 0:
Backtrace:
0x0009CC88 0x00D63C 0x00029DAO 0x000BOA10 0x000B4270
proceeding back via exception chain:
Exception state (sv=0x26acd700)
PC=0x2717E900; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x2717EBE4; R1=0x26AD3AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27178B0 0x00344ACB 0x00345970 0x2717EC08 0x2718458 0x00340590
0x003496EC 0x0034B59C 0x0034A6BC 0x000B1DD4
Kernel Loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWDHC1(3.9.5)00x2717c000->0x271aafff
dependency: com.apple.iokit.10PCIFamily(2.6)00x1e840000
dependency: com.apple.iokit.I0FireWireFamily(3.4.7)00x270dd000
Exception state (sv=0x26abd280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000;R1=0x00000000; XCP=0x00000000 (unknown)
BSD process name corresponding to current thread: kernel_task
so what
greetings from berlinGreetings,
It appears to be a FW problem, possibly flaky case, or drive problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
How do I re-install my Mac OSX Server from scratch
Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
DonIf you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps -
While using Bootcamp 5.1, and OS X 10.8.2, I partitioned my Mac disk with 80 Gigs for Windows 7 home and the install went great, but I must have missed the time when I was to install the Mac drivers disk to install the drivers for Windows,(when in Windows I don't have a mouse or optical drive.) Is there a way to install the drivers after Windows is installed, or do I have to go through the whole process all over again?
Press X key after the startup sound to boot into OS X. Then, open Boot Camp Assistant, download Boot Camp drivers and burn them into a USB drive or DVD. Finally, boot in Windows and install drivers
-
I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?
I didn't see this update come up in "Software Update"
If I was not meant to install this update, would it cause ANY damage at all to my mac ( this is my second as I dropped the first )
If I were to re-install ML would this fix any errors that this may have caused ?
The bottom of the page I link to says:
Boot ROM or SMC Version Information: MM51.0077.10
But when I click on "About this Mac" it says:
Boot ROM Version: MM51.0077.B10
SMC Version (system): 1.75f0
What does the additional "B" mean?
My mac mini is the Mid 2011 Model.
I am sorry if I am sounding super paranoid about this, but I don't want to have caused any permanent damage.Hello,
It's somewhere between almost impossible & impossible to install the wrong EFI Update with all the checks it does!
Mac mini (Mid 2011) with Intel graphics
Macmini5,1
MM51.0077.B10 (EFI 1.6)
Mac mini (Mid 2011) with Radeon graphics
Macmini5,2
MM51.0077.B10 (EFI 1.6)
Mac mini Server (Mid 2011)
Macmini5,3
MM51.0077.B10 (EFI 1.6)
http://support.apple.com/kb/HT1237
Not sure what the B means.
If I were to re-install ML would this fix any errors that this may have caused ?
No, Firmware is unaffected by any OS change or re-install. -
I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?
After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.
-
i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me
If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I have this iMac late 2006 and I want to install the Mac OS X Lion
Hello,
I want to install Mac os X lion, (not mountain lion) on my iMac Late 2006 , but it is no longer available in the mac app store. How can I do to install the Mac OS X Lion on my computer?
The thing is that i was hoping the the mountain lion was compatible with my iMac, so is there a way i can still get the Mac OS X lion?Apple for some dumb reason removed it from the App store, so you now have to call them and ask for it. I also have a Late 2006 Mac Pro and luckily I took the plung awhile ago and bought it from the App store. Since they cut off so many machines still being used they should have left Lion in the store. Any 2006-2007 Mac Pro and any other Mac that has a video card that doesn't have 64b drivers cannot go to Mountain Lion.
-
hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?
On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode -
CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!
Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8 -
Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?
Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts. -
hello sir
i have mac os x lion and A
fter upgrading to Lion i can't instal the face time app its type ( FaceTime can’t be installed on “Mac” because the version of Mac OS X is too new. ) can anyone help me please .
notes : on snow leopard the face time was work normally but i delete it the app i thought it will work after i reinstall itLion comes with FaceTime. Look in your dock or in the Applications folder.
Maybe you are looking for
-
Error handling in post-mapping (10gR2)
Hi all, I raised an application error in a procedure executed in post-mapping with : raise_application_error (-20001, varMessage) ; but when it raised the mapping is not marked on error and there is nothing in the mapping execution details displayed
-
PE9 loading achdv files no problem, but playing them in preview screen shows lot of distortion
Hello everyone, We bought pe9 to be able to edit hd files. Loading them and editing them works perfectly, But when you play them back in preview screen or full screen the movie is blurred and shows a lot of distortion. This happens to every file we l
-
Add PA_NON_LABOR_RESOURCES.DESCRIPTION in Invoice Report
I need to modify the Invoice Report by adding the PA_NON_LABOR_RESOURCES.DESCRIPTION for each line in the invoice (q_lines query). I'm not sure how to tie a record in ra_customer_trx_lines back to pa_expenditure_items (also ensuring a one-to-one mapp
-
Need Information about how to integrate with Struts
i need information/sample code for how to integrate flex with jsp/struts. please help me
-
I got a new computer so I transfered all my old music to my new iTunes. When I play a song I have purchased on a previous computer, the song stops playing after 40 seconds or so before the song ends. What's the deal?