Install on Multiple PCs

Hi!
We need to install windows 7 on multiple pcs but there is no network. They will work as stand alone pcs. How can we create an image of one windows 7 pc which is ready with all the softwares and install in on other pcs? Is there any free software?
Thanks.

I'll try to summarize the process in general.
Is necessary to prepare a computer with all the software and drivers (when the same  hardware will be much simpler)
At the end of the preparation of master computer you will perform a SYSPREP process (To remove any computer's identification, and to  deleting files that are unrequired.)
http://technet.microsoft.com/he-il/library/cc721940(v=ws.10).aspx
PE BOOT disk or other boot disk  should be prepared, for pe:
http://technet.microsoft.com/en-us/library/dn613860.aspx
use with Microsoft IMAGEX  command with the CAPTURE   switch to save the IMAGE on mobile device like :DVD,DISKONKEY,mobiledisk..
http://technet.microsoft.com/en-us/library/cc722145(v=ws.10).aspx
to deploy the image from mobile device  to target machine  use with imagex with APPLY switch .
thanks,
Israel Chemo.

Similar Messages

  • Migrating from Zune to iTunes (not happy)  - How do I sync multiple PCs & music purchases with single library?

    Apple community:
    Have been fighting the change from Microsoft Zune to Apple iPod/iTunes for various reasons for a few years, but have no choice but to move now.
    Under Zune I could have the Zune desktop software (similar to iTunes) installed on multiple computers (four to be exact). All four installations of the Zune software pointed to the SAME single media library (\\server\media\music), and all four computers had instant access to new media purchased across any of the four PCs.
    In other words, if I purchased a song on my home office PC downstairs, if I went upstairs to my personal PC, the song I purchased on the office PC was immediately available on the other 3 PCs in the house. It was extremely convenient being able to access the same media library and purchased songs across any PC, and not have to worry about manually searching for new media and/or re-syncing, etc on every PC each time. Whatever I did in Zune on one PC was instantly replicated on the others. Very simple.
    Apple iTunes on the other hand works completely different, so I'm trying to wrap my brain around how to achieve a similar solution with iTunes. I know that each iTunes installation uses a seperate library (file) for EACH PC (and then there are limits with how many computers can access a song at once, and other drawbacks).
    My question is this - Is there ANY solution that allows me to have iTunes installed on multiple PCs, and be able to instatly replicate any changes to the other PCs? In other words, I would like to be able to purchase a song on one PC, and have that song immediately show up on the other PCs in the house.
    The same goes for playlists. If I create a playlist on PC #1, can I edit the same playlist on PC #3, and then see those changes reflected on PC #1?
    I hope that doesn't sound too confusing. Thanks in advance for help/tips.

    How to use your iPod to move your music to a new computer using iTunes7
    http://docs.info.apple.com/article.html?artnum=300173
    How to use your iPod to move your music to a new computer using iTunes6
    http://docs.info.apple.com/article.html?artnum=304304
    Cheers,
    Patrick

  • Deploying basic command line to multiple PCs

    Hi,
    I am trying to execute this basic command line to multiple PCs from SCCM.
    netcfg /c s /I MS_Server
    If I execute it locally with elevated permissions, it works fine
    If I execute it locally without elevated permissions, it doesn't work
    When I try to create a package in SCCM to run this command line, it is showing as it succeeded but when I look at the execmgr.log on the client machine, it says it failed with error code 1.
    Someone can give me a hint of what I could try?
    Thank you!

    To my knowledge, you do not need to 'install' File & Printer Sharing, it's just a firewall port configuration on Windows clients. This could be configured through Group Policies.
    Also, your command is for Windows PE as refrenced here:
    http://technet.microsoft.com/pt-pt/library/hh875638%28v=ws.10%29.aspx

  • Multiple PCs?

    Could I install Icloud sync to more than one PC (same user ID), and would it then sync my Outlook cakendar and contacts between those multiple PCs and one IOS device?
    Or would that likely result in duplicate entries?

    Hmmmm. The easiest way to handle that involves manual management rather than syncing, i'm afraid. See:
    Using iPod with multiple computers
    Managing content manually on iPod

  • ITunes 9.0.2.25 Library Issue with Multiple PCs

    I have been using iTunes for years with minimal issues on multiple PCs on the same network. My iTunes library and all of my music resides on a network-attached drive mapped as drive "Z" on two PCs.
    - One PC is running XP Media Edition and is hard-wired to my Ethernet hub
    - The other PC is running Vista and is connected wirelessly to the network
    Once in a while, when my versions of iTunes got out of sync, I'd get a message saying that the library was created with a different version of iTunes. I'd simply update the PC that had the older version and everything was fine.
    Now, with a recent update to version 9.0.2.25, only the hard-wired PC (the XP machine) will read the library. Both machines have 9.0.2.25 installed, but when I try to use the laptop it says that it appears as if the library is corrupt, renames the library "(Damaged)" and creates a new, empty library. I was able to re-import nearly all of my music, though some purchases are gone.
    Has Apple now somehow eliminated the ability for multiple PCs to access the same library? I find it suspicious that the only machine that can access the library is the one with which I imported the songs to begin with.
    Any advice would be appreciated.

    I don't try to open iTunes on both machines. If memory serves, I think that causes problems.
    Last night I checked for updates and it offered a new version - 9.0.3. I upgraded the laptop (the one that I'm having problems with) and it fixed it. The other machine is still 9.0.2.25 but it doesn't seem to bother it.
    All fixed!
    Thanks!
    Jim

  • Can i install itunes multiple times on one computer for multiple users?

    Can i install itunes multiple times on one computer for multiple users?

    Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
    tt2

  • Can i use this download and install on multiple computers?

    Can i use this download and install on multiple computers?

    I assume you're talking about the Lion installer?  If so, yes, you're allowed to use it on any machines authorized with your Apple ID (which I believe means a maximum of five machines).  This is, of course, meant for family use...  I'm not sure about business use, but I'd suspect you need one copy per machine at a business.  If you're in that situation, you may want to wait for the $69 Lion flash drive Apple will be releasing next month sometime, as that won't be tied to an Apple ID.  But check with Apple to be sure on that.

  • Can multiple PCs access one remote panel at the same time?

    I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
    "LabVIEW:  Serial port receive buffer overflow.
    LabVIEW:  The network connection was refused by the server."
    My question is: Can multiple PCs access one remote panel at the same time?
    Thanks in advance!
    Y

    Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

  • Installing Reader on PCs without internet access.

    How do I download and install Reader to a CD so that I can install on desktop PCs that do not have internet access.

    You can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    copy it in any suitable media, and run it on the other computer.

  • Can I use iTunes to download iOS 8.0.2 once and then install on multiple new iPhone 5S we have at work?

    Can I use iTunes to download iOS 8.0.2 once and then install on multiple new iPhone 5S we have at work?
    Our 30 new iPhone 5S came with iOS 7.1.1. 

    The fact that the OS requires 3.8GB of storage is ridiculous to begin with.  Especially when they know there are a ton of 16GB models out there.  Clearly another big brother attempt by Apple to force new iPhone sales which amazes me beyond description.  If I experience pain with a product, I'm not going to buy another one and "hope" the problems go away.  I'm going to buy a competitor's product.  Apparently the lemmings keep following the herd or Apple couldn't continue these strong arm tactics.  I'll stay on iOS 6.x until I'm ready for a new phone then...by another manufacturer.

  • How to install/uninstall multiple packages from a list

    Is there any way to install/uninstall multiple packages written in file? E.g. I have text file with content:
    packageA
    packageB
    packageC
    And I want use something like "pacman -S <<< file-with-packages". I know, I can get these files on one line and paste it as parameters, but this is not pretty way.
    I tried searching (also in man), but I didn't found anything (if I missed this in man/wiki, I am sorry, now is "early tomorow" and my mind needs redbull or sleep )

    https://wiki.archlinux.org/index.php/Pa … d_packages

  • I have attempted to install iTunes multiple times but to no avail. I have installed every file, and followed every instruction on the support pages. I click download, and it takes me directly to the "Thank You for Downloading" page without doing anything.

    I have attempted to install iTunes multiple times but to no avail. I have installed every file, and followed every instruction on the support pages. I click download, and it takes me directly to the "Thank You for Downloading" page without doing anything. I am running it on FireFox, and I have tried with Internet Explorer, neither have worked. I have been trying to do this for weeks now, and I am getting majorly frustrated. Please, help.

    Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

  • IPhone3 - can I sync onto multiple PCs running iTunes ? or is this a one-one relationship ?

    Can I sync onto multiple PCs running iTunes ? or is this a one-one relationship ?
    My situation - use home computer for music etc., boat computer for weather file downloads,officecomputer for email / pictures ...
    Thank you

    There is an App called Weathertrack, which pulls from the web GRIB files (weather information), that I would like to download onto the laptop we have on the boat, that runs some routing software (SeaTrack), that in turn integrates weather, tide, GPS etc to help with vessel navigation.
    I can obviously do this from my home computer (this is the one that has the 1-1 sync relationship), but I don't want to empty the IPhone content whilst on the boat ...
    If you can think of a way of making this happen, I would be very appreciative. Both PCs are windows based, home is Vista, boat is XP.
    Kind regards

  • How is Acrobat licensed? I'm seeing in forum that license is for install on two PCs. Correct?

    How is desktop (non-subscription) Acrobat licensed? I'm seeing in forum that license is for install on two PCs. Correct?

    Hi sc47074929,
    A non-subscription Acrobat needs to be licensed using a serial number.
    Please refer to this KB doc. : Installing and Activating a Try & Buy product your will find information regarding how to purchase a licence.
    And yes, licensed Acrobat can be installed on two computers, however you will able to use the product only on one system at a time.
    In case if you still have any query, please let us know. We will be happy to help you.
    Regards,
    Aadesh

  • Synchronizing E90 with multiple PCs

    I have an E90, and I used to have an E61i. I have a PC at home and another PC at work. They both run MS Outlook 2003. Does PC Suite recognize that there are the E90 is being sync'd with more than one PC? I am getting duplications, tasks that are done reappearing, and notes not being synchronized all of that when I sync between owrk, home, and the E90. I used to have a WM phone and with Activesync, it acknowledges that there are multiple PCs and these problems never did exist. Is there something I am missing or some settings I overlooked? Please help!!

    No, you're not the only one. I think I've hit a very same problem. In my case I can't synchronize contacts properly, as soon as I synchronize contact with one PC my E70 just won't synchronize it with other
    For now I'm thinking of synchronizing my phone with only one PC and using this PC to synchronize with other devices. That's the only workaround I can think of and it's not very convinient

Maybe you are looking for

  • Collection Errors in Grid Control Sybase Plugin

    Hi. I have some collection failures in a Sybase 15 Database i registered to Grid Control using the Sybase ASE Plugin. These are the 3 of them: Result has repeating key value : 0,5,0,, Result has repeating key value : 0000000000000000000000000000,2008

  • Old Toad's automator workflow to backup Library6.iPhoto database

    Dear Old Toad, I just today downloaded your workflow to backup the iPhoto database file, and am having problems making it work. When I run it, either from the dock or the script menu, it launches Automator but then closes without doing anything. I do

  • How to run Policy manager in 10g on UNIX

    Hi, I have installed Oracle 10g and I want to install Label Security. Can anybody let me know how to open Policy Manager in 10g. I am working on HP-UX platform.... JAI HIND Darshan

  • RMS India Localization (L10N) Documentation

    Where can I find whitepapers detailing the RMS India Localization functionality (apart from default release notes of 12.0.5 and 12.0.10)? Where can I find End-to-End test scenarios for RMS India Localization?

  • About UI element in webdynpro

    Hi Experts, Can anyone give coding or link for BreadCrum and BIApplicationFrame UIelement. Regards, Anita.