Install optional driver updates from Windows Update for IdeaPad Yoga 13?

Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates:
Conexant - Audio Device - Conexant SmartAudio HD
10.01.2014
Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000
Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 2014
04.06.2014
Should I install those updates or should I keep the original drivers?
The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated:
Conexant Audio Driver for 64-bit Windows 
8.65.3.53 10/22/2013
Integrated Graphics Driver for 64-bit Windows
Windows 8.1 (64-bit)
9.17.10.2843 10/23/2012
Intel Video Driver for 64-bit Windows
10.18.10.3282 10/22/2013

Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site.
So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

Similar Messages

  • Is there any "contraindication" about installing every updates from Windows Update (and Intel drivers)?

    Hello!
    The question is in the title.
    I decided to reinstall Windows 7 on my MacBook Air using Boot Camp and I'm trying to play a video game which is quite laggy. I downloaded and installed the lastest driver for HD Graphics 4000 and my computer didn't explode. Can I also download all the optional updates with Windows Update, including the ones concerning drivers? I read somewhere that we shouldn't install other drivers than the ones on the Boot Camp x.x Support Software installer... Is it true?
    Thanks!

    Peter,
    From what I read, I thought Internet based clients always download from Microsoft Windows Update first?
    "New in System Center 2012 Configuration Manager, when you have a software update point that is configured to accept connections from the Internet, Configuration Manager Internet-based clients on the Internet always scan against
    this software update point, to determine which software updates are required.
    However, when these clients are on the Internet, they first try to download the software updates from Microsoft Update, rather than from an Internet-based distribution point. Only if this fails, will they then try to download the required software updates from
    an Internet-based distribution point. Clients that are not configured for Internet-based client management never try to download the software updates from Microsoft Update, but always use Configuration Manager distribution points."
    https://technet.microsoft.com/en-us/library/gg712701.aspx

  • Download non-english updates from Windows Update Catalog

    Hi, I would like to integrate all updates to install image. However, I must select all language of each updates on Windows Updates Catalog each by each. Any idea to download all updates with differance language as easier?
    thanks

    Hi,
    I'm afraid that it is inevitable and you have to tick "Select all" for each update if you want to download all language of Updates. Why do you want to integrate all language updates into an image? if you need additional language user
    interface, then you just need language pack added to your image.
    Yolanda Zhu
    TechNet Community Support

  • KB2388210 Update from Windows Update Breaks Sound Driver

    My sound card driver stopped working after I installed this update. ?I reinstalled the driver multiple times and the issue was not fixed. ?I uninstalled the update and my driver worked once again. ?I have a Xtreme Gamer Fatality card.

    It's an application compatibility update. I don't think it is a common issue.
    Did you remove the update?

  • Windows 8.1 Update from Windows 8 Giving Error Message During Installation

    I was instructed to use a generic Windows 8.1 key, and then change it to my Windows 8 key after installation. But, at either 94% or 96%, it gives me the following error during the installation:
    Windows 8.1 Update has failed.
    I have tried everything online and can't find anyway around it. In the meantime, all of my Windows Store apps are broken, and thus I can't update from the Windows Store. I have the correct ISO files from http://microsoft.com/ and I even have the option to
    install Windows 8.1 from a program that was automatically added to the "Classic Start Menu" that was presumably placed by Windows automatically. No matter how I attempt to install it, it fails. I would really appreciate it if someone would help me
    soon.
    Thank you,
    Ben

    Hi,
    I was instructed to use a generic Windows 8.1 key, and then change it to my Windows 8 key after installation.
    What's the meaning of it?
    Did you update from Windows 8 operating system from Window store?
    Please locate to %WINDIR%\Panther, see if there is any clue in the setupact.log and setuperr.log.
    Meanwhile, please refresh or reset your original Windows 8 system to ensure it's complete and correct.
    Then retry to update to Windows 8.1 from Windows Store.
    Best regards,
    Karen Hu
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Unable to switch from Windows Update to Microsoft Update

    On a new Windows 7 64 bit computer I am unable to access Microsoft updates. Windows update works fine, but when I click the link to get updates for other Microsoft Products it will only take me to the screen that tells me to use the start menu to check for
    updates. I have also tried other links to Microsoft Update from other Microsoft webpages and end up with the same result.
    I have Office 2013 Standard installed and activated, and from previous installation experience know that I should be able to access numerous updates through this method.
    To verify that I am able to install updates for Office I manually downloaded and installed one Office 2013 update through the Microsoft download site.
    How do I get this machine to switch to Microsoft Update?

    Hi,
    According to your description, I think you may had a misunderstand between these two updates installation. Here is a paragraph which talking about Use Windows Update to Check for Updates to other Microsoft Products:
    By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update—a service for managing updates to Microsoft
    Office and several other Microsoft products—into Windows Update so that you no longer need to visit Office Online to get updates.
    If you do not already have Windows Update integrated with Microsoft Update, you will see the message “Get updates for other Microsoft products” on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside
    this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates “For Windows and other products from Microsoft Update.”
    From: http://technet.microsoft.com/en-us/magazine/ff642466.aspx
    Hope this helps. If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
    Roger Lu
    TechNet Community Support

  • How to update from Windows 8.1 Eval to Full version ?

    Hi All,
    I have a issue. I had installed the Windows 8.1 Eval 90 days edition. I need to update this to Full version by entering the product key.
    But how ever it is not accepting it. Is there any other way of updating from Windows 8.1 Eval to full without loosing data ?
    Gautam.75801

    Hi Guys,
    Thank you. 
    I have decided to wipe out and do a fresh installation. For time being i have altered the OS files which is not recommended to avoid automatic restart for every one hour using the below.
    http://nepalitalks.blogspot.in/2013/02/how-to-stop-windows-8-evaluation-from.html
    Gautam.75801

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • Prevent local administrators from opting out of Microsoft Updates / accessing Windows Update "Change settings" page

    Hello,
    Is there a a group policy setting / dll file / registry setting that I can restrict access to that would either:
    A) prevent local administrators from unchecking the "Give me updates for other Microsoft products when I update Windows" box?
    or
    B) prevent access to the "Change settings" option on the left side of Windows Update?
    Thanks!

    > referring to the "Remove access to use all Windows Update features"
    Yes.
    > enabling this group policy setting would disable Windows Update and
    No. It removes access to windows update, not windows update itself. If
    you enable it, you have to make sure that windows update is properly
    configured:
    http://gpsearch.azurewebsites.net/#2791
    >
    https://technet.microsoft.com/en-us/library/bb490846.aspx). This is not
    This article is - hum - somewhat outdated :)
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • I updated from windows xp to windows 7 and can not get into my itunes account.  I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one.  How do I get to my itunes?

    I updated from windows xp to windows 7 and can not get into my itunes account.  I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one.  How do I get to my itunes?

    Take a look at Apple's document for authorizations -> iTunes Store: About authorization and deauthorization.
    You can deauthorize all computers from iTunes. All you have to do is click iTunes Store, click your account name in the upper right corner of iTunes, then deauthorize all.

  • I updated from Windows 8.0 to Windows 8.1 and ever since Firefox has run somewhat strangely. In particular when on sites with a lot of images like Facebook,etc

    Hello, I am writing as I am experiencing some issues with my favorite web browser after updating to Windows 8.1. Here are some details. I updated from Windows 8.0 to Windows 8.1 and ever since Firefox has run somewhat strangely. In particular when on sites with a lot of images like Facebook. It is like there is some kind of Flikr effect between the desktop and the images and between the images and the browser (almost like old 16 bit video games flikering). It is not too bad but it is an issue. I have tried resetting firefox and restarting the computer. I haven't tried a repair, and I haven't done an uninstall yet.

    thank you for helping, the issue seems to have been caused by the hardware accelerator

  • How Do You Filter, Or Stop Automatic Updates From Windows or HP to a Windows 8, 2000 Notebook PC.

    I would like to know how I can see automatic updates from Windows or HP before they go into my computer?  The reason is, is that these auto updates mess up my IE and my printer software.  I have a HP 2000 Notebook PC, Windows 8, 64 bit.  I would like to be able to filter or see these updates before they go in my computer.  Is there anything I can do, or a setting I can set?
    Thanks,
    Susie

    Hi Mikipups,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 2000 Notebook and issues  Microsoft updates. Here is a fix from Microsoft.
    Type Update in the Start Menu search box, select Windows Update from the top of the menu and in Windows Update select Change Settings on the left side of the window.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I can't download updates from the update option in PS CS 5.1.

    I can't download updates from the update option in PS CS 5.1. Also having trouble installing the update directly from ADOBE. The program is crashing my system on a regular basis. Anybody got any ideas?

    It might help if you were a bit more specific, e.g., ''I chose Help - Updates, and this happened, then that happened, then an error message that stated 'xxxxxx' was displayed''.
    It could also help others help you if you'd describe your system - what kind of hardware, what operating system, etc.  One good way to do that is to choose Help - System Info in Photoshop, then copy and paste the info into a post here.
    -Noel

  • Downloading Service Pack 1 from Windows Update

    I have a laptop I just restored Windows 7 Professional from a recovery disk and have run 1indows Update till there are no more updates to be applied.  However Service Pack 1 is unavailable to download.  I don't want to apply SP1 from a download
    site but I will if that is the only way.  Is there a way to get SP1 from Windows Update or where is the best download location to get a convenient simple download of SP1?  Thanks.
    Michael T. Glenn
    Michael T. Glenn

    Hi Michael,
    How did you get that SP1 update?
    As Arnav provided, these address are all available.
    In addition, please follow these steps to check if your computer have already installed SP1.
    1. Open Windows Update by clicking the Start button. In the search box, type
    Update, and then, in the list of results, click Windows Update.
    2.In the left pane, click View update history.
    Karen Hu
    TechNet Community Support

  • I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

    I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

Maybe you are looking for

  • Help!  iPad Mail replying with account name

    Greetings, I couldn't find a topic about this so I am starting a thread here.  It's just a quick question: I have all of my email accounts set up on my iPad, for example, "My Yahoo" but when I reply or forward emails from the account on the iPad, peo

  • History for a locked tcode

    Dear Experts, Someone had locked a Tcode in our production system. Now we have unlocked the Tcode through SM01. But I want to find out the person who has locked that particular Tcode. Its very important for us to find out. Is there any way out to get

  • WaveOut is causing ducking/audio attenuation to occur unintentionally.

    Hi there, I've encountered a strange issue with the waveOut API's and I'm not sure if its by design or if I'm missing something. Basically If I open a device specifying that the default communication device is to be used, that device will always caus

  • Understanding the basic feature of the editor

    The JDeveloper does edit time code check. It complains for a method like, public String test() { return 2; // invalid return but it does not complain for, public String test() { // no return statement Please someone explain the idea behind this behav

  • Viewing items in Finder full screen

    I seem to remember reading somewhere that when viewing finder items in cover flow (at least I think it was in cover flow), you could make the item appear full screen size, or at least very large. Is this right? If so how? Thanks! DanK