Install Oracle 8.1.7 (TRU64 UNIX 5.1)

Need information on how to initate the istallation of Oracle
Software on TRU64 UNIX 5.1. Prior to 8.1.7, the "orainst" shell
for UNIX was used from the command line. The installation
instructions for 8.1.7 require the setting of the variable
DISPLAY, and the execution of the script "runInstaller". For
what I can tell, the new installation routine requires X-windows
to run, but I cannot figure out how to set it up.
Thank you in advance for any help on this subject.
Eduardo Bedoya

Dirk:
I had the same problem, which is caused by a
wrong version of Java. Follow the instructions
in Denis Claric's Oracle page:
http://staff.in2.hr/denis/oracle/
BUT do NOT install the RPM packages from the
RH7.1 CD-ROMs, get them from RedHat's web site instead.
-Ramon

Similar Messages

Oracle Performance problem in Tru64 Unix

Hello All,
I am having performance problem in Tru6u Unix. Details are mentioned below :
OS: Tru64 Unix
Oracle Version : 8.1.7.4.0
Forms : 6.0
Mode: Oracle Parallel Server
When, developers are trying to save some data using forms, it's taking too much time.
Any hint/idea, how to start tracking the things, will be highly appreciated.
Regards,
Rajeev Tomar

Check what are the session waits from v$session_wait and try to tune them.
If possible, get the code and tune the sqls.
Without knowing the application behaviour and other related stuff, no one can simple adice on performance problems.
Jaffar

When can we download the Oracle 10g for HP Tru64 Unix?

Hi,
Could you tell me the time to release the HP Tru64 Unix version?
Thanks

Check this: http://otn.oracle.com/software/products/database/oracle10g/index.html
Joel Pérez

Install Oracle 8.1.7 on Tru64 UNIX 4.0F

hello:
I have installed oracle8.1.7 on Tru64 UNIX 4.0F.
After startup database and start listener,at first only one listener service could be found using command lsnrctl status looks like:
Service "ORA8" has 1 instance(s).
The command completed successfully
,but after while (2-3min) use the same command can find another result, looks like:
Service "ORA8" has 1 instance(s).
Service "ORA8" has 3 instance(s).
The command completed successfully
Then client can not connect to database.
I can not find the reason.
Can you?
Thanks a lot!

make sure the required characeter set (called subset in TRU64 UNIX) is loaded in OS ...
you can check with command 'setld -l <>'
i dont have a UNIX box with me now ... so i can't tell you exactly what it is ..
take help of any OS (TRU64 UNIX) expert !
good luck

Download for Compaq Tru64 unix

Hello,
I am trying to install WLS6.1 on Compaq Tru64 unix. I have downloaded the
installable from the BEA website. The downloaded file is
"weblogic610sp3_generic.zip" and the site mentions that this is WLS 6.1
download with SP3. But it seems like this file contains only the SP3 files.
Where can I get the download for WLS6.1 for Compaq Tru64 unix?
Regards,
Madhavi

Thanks. I got this impression because usually the SP releases come as zip
files while the WLS installables for unix systems come as bin files. I could
install using the zip file successfully.
Madhavi
"Wayne W. Scott" <[email protected]> wrote in message
news:[email protected]..
>
>
>
What gives you the impression that it is just the SP3 files in there?
The SP3 file has a different name. For example, on Windows it is
wls61sp3_upgrade_win.exe. I hope you are not unzipping it.
Just try to install it. If you're stuck, open a case and I'll look forit!
>
>
Wayne Scott
Madhavi wrote:
Hello,
I am trying to install WLS6.1 on Compaq Tru64 unix. I have downloaded the
installable from the BEA website. The downloaded file is
"weblogic610sp3_generic.zip" and the site mentions that this is WLS 6.1
download with SP3. But it seems like this file contains only the SP3files.
Where can I get the download for WLS6.1 for Compaq Tru64 unix?
Regards,
Madhavi

About install oracle 8i on Tru64 Unix

I install 8i on Tru64 Unix according install guide,all requests but patch of OS kit2
is satisfied,when I run ./runIstaller,OS tips "./runIstaller line XX '(' unexpected",
etc.I want to know why and how to handle. thanks.My e_mail [email protected]

You need at least one X server.
You can install the database to a server which has no X environment on an X terminal.

Install ORACLE 8.1.6 and 9i on HP UNIX 11.20 (11i)

Hi,
When I install ORACLE 8.1.6 and/or 9i on HP UNIX 11i (11.20, hardware: i2000 workstation), I got the following error message:
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target nnfgt.o of makefile
/opt/oracle/product/8.1.6/network/lib/ins_net_client.mk
Exception Severity: 1
Would appreciate very much if someone can help to analyse the cause of the problem.
Thanks.

Hi,
When I install ORACLE 8.1.6 and/or 9i on HP UNIX 11i (11.20, hardware: i2000 workstation), I got the following error message:
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target nnfgt.o of makefile
/opt/oracle/product/8.1.6/network/lib/ins_net_client.mk
Exception Severity: 1
Would appreciate very much if someone can help to analyse the cause of the problem.
Thanks.

Oracle Installer Problem while installing Oracle 9i on HP Unix

Hi Everyone ,
I had earlier installed 9.2.0.1 on Linux and had no probs whatsoever . When i am trying to install Oracle 9.2.0.1 on HP Unix , the Oracle Installer opens up a window saying CHOOSE JDK HOME DIRECTORY . I have already set the PATH environment variable to point to /opt/java1.4 and /opt/java1.4/jre/bin and also JAVA_HOME to point to /opt/java1.4 . Even after trying to put the directory information it refuses to go thru giving the Error INVALID JDK HOME.PLEASE ENTER CORRECT JDK LOCATION.
Any replies would be greatly appreciated
Thanks
Ravi

This could be due to you have multiple JDK homes like java1.4 and java1.3. Instead of type JDK home in the windows box, try to browse and select the JDK home and try it. Otherwise, if you have multiple JDK homes, then try to remove one of them.

Oracle 8.1.7 Installation (tru64 Unix)

Hello all,
I am having some problems installing Oracle on tru64 V5.1b. I have set up all the files with the right permissions and all, and i have edited the login file, but for some reason, whenever I try to install, it keeps giving me the error Ünable to setup inventory. You may not have proper permissions." Any ideas?
Thanks

check out the available disk space for temp, oracle installer need 500MB of available disk space for temp, or delete OraInstaller directory on /temp

Does Oracle 8.1.5 Run On Tru64 Unix 5.1

Does Oracle 8.1.7 Run On Tru64 Unix 5.1
We plan to upgrade the OS and Oracle in two steps.
1. First weekend - upgrade the operating system from Tru64 4.0d to Tru64 5.1.
2. Second weekend - upgrade Oracle from 8.1.5 to 8.1.7
Questions:
1. Will Oracle 8.1.5 run successfully on Tru64 5.1 during the one-week transition period?
2. Does it make any difference if we upgrade the OS to Tru64 5.1a instead of 5.1?
Thanks in advance,
Alan Holsted
Metro, Portland, OR.
null

A question along the same lines, does Oracle 7.3.4 run On Tru64 Unix 5.1?
We plan to upgrade the OS and Oracle in two steps.
1. Firstly - upgrade the operating system from Tru64 4.0F to Tru64 5.1 (via 5.0A).
2. Secondly - upgrade Oracle from 7.3.4 to 8.1.7 or perhaps 9.x
Questions:
1. Will Oracle 7.3.4 run successfully on Tru64 5.1 during the transition period?
2. Does it make any difference if we upgrade the OS to Tru64 5.1A instead of 5.1?
TIA
Chris

Installed Oracle client on UNIX is 32 bit OR 64 bit

I have Oracle 11G DB client installed on Unix system: RHEL 5 64 bit. I would like to know whether the installed oracle client is 64 bit or 32 bit. How do I get to know the same?

Hi;
Please see:
How To Find Oracle Client Version And Check If It Is Instant Client Or Full Client [ID 818454.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Installing Oracle 734 on tru64

Hi All
After a h/w issue ("the disk-controller blew taking out the os but maybe not the array" - whatever that means :-) ) , the o/s is being rebuilt, and I may soon be called upon to re-install Oracle 734 on tru64 (circa 1999).
My knowledge is Oracle9i on Solaris (argh!!)
please help.
Richard101

I am not pretending to write a full reference, the documents listed above are enough for a 7.3 administration. Oracle 9i/10g has a graphical environment. Back in 7.3 everything was CLI (command line interface). You have to manually create everything, database, listener.ora, tnsnames.ora, sqlnet.ora files.
It didn't have sqlplus as the administrative tool, it was jus a client you can use to connect regular users. The connect / as sysdba connection didn't exist, there in only was the svrmgrl CLI to perform administrative tasks, such as recover, create database, and all regular SYSDBA tasks.
There was no spfile, but the regular init.ora file. Just to name some meaningful first hand features.

Unable to Install Oracle 11g R2(11.2.0.1.0) on RHEL 6

I'm performing installation of Oracle 11g r2 with Server class on RHEL(installed as Desktop class)
In prerequesites check i'm getting the following errors:
     Checks          STATUS FIXABLE
     Soft Limit: maximum user processes     FAILED     Yes
     Packages     FAILED
     Package: gcc-3.4.6     FAILED
Package: compat-libstdc++-33-3.2.3     FAILED
     Package: elfutils-libelf-devel-0.97     FAILED
     Package: glibc-devel-2.3.4     FAILED
     Package: glibc-headers-2.3.4      FAILED
     Package: gcc-c++-3.4.6     FAILED
     Package: libaio-devel-0.3.105     FAILED
     Package: libstdc++-devel-3.4.6     FAILED
     Package: unixODBC-devel-2.2.11     FAILED
     Package: pdksh-5.2.14     FAILED
Previously i got Hard Limit : maximun Use rlimit process.
I've solved them by running appropriate Script file.
But i can't the understand the above errors as i'm totally NEWBIE to Linux(I've preciously have an experience of Installation of above mentioned version of DBMS on WIndows 7 32 bit OS)
My Linux OS Details:
when the following command executed: df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 50G 11G 37G 22% /
tmpfs 1.8G 608K 1.8G 1% /dev/shm
Also Kernel architecture:
for uanme -r
i got
2.6.32-44.1.el6.i686
Please Help me to solve my errors .........I'm totally Confused of new OS parameters.
Thanks in advace for Help
Regard's Tejaswi.

Hi;
Oracle 11gR2 is not certified wiht RHEL6 yet. Its mean you ar making installation on uncertified platform.
Please check certfication matrix
Oracle Certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Also see:
Oracle® Database on Unix AIX®,HP-UX®,Linux®,Mac OS® X,Solaris®,Tru64 Unix® Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Installation guide:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/pre_install.htm#CHDFFBIF
Regard
Helios

Error while installing Oracle 10G on Oracle Enterprise Linux 4.8 32 bit

Our machine is a x86_64 machine with 32 GB of RAM available. I have installed OEL 4.8 32 bit on this machine (configured swap space of 32 GB) and OEL by default boots with the Hugemem kernel.
I am trying to install Oracle 10G enterprise edition on this. All required kernel parameters, shell limits etc. have been verified and configured. The preinstallation checks succeed on all the tests and installation proceeds smoothly. However in the last step of configuring the database using dbca following two errors are thrown:
1. ORA-27102 - out of memory
2. ORA-01034 - ORACLE not found
Most places where I am reading are telling to configure kernel parameters. However that doesn't seem to be the problem in this case.
Please Help.

Hi;
What is exact db version? What installation log says?
Please see and confirm you have all pre-req settings
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Install Oracle 8.1.7 (TRU64 UNIX 5.1)

Similar Messages

Maybe you are looking for