Install oracle 8.1.7 win 2000

Check this link if your computer have a P4.
http://support.intel.com/support/processors/pentium4/issues.htm

I have the same problem, I have been told it is because MTS can't view the DBA_PENDING_TRANSACTIONS on the Oracle db to see if the transaction went ok. I am connecting to oracle 7.3, and I think these views are named differently, but I can't find any if on configuring Oracle 7. If you get any more info let me know!
Cheers

Similar Messages

Can not install Oracle 9i R2 on Windows 2000

I can not install Oracle 9i R2 on Win 2000. It failed at 48% with this message.
Error in writing to file C:
\oracle\ora92\oem_webstage\oem_webstage_8.jar
I tried by copying the 3 disks to my hard drive and reinstall but not success.
Help me please.
Thanks
Ken Wongho

I've been able to install 9iAS on Windows 2000 - I have the Origin database on a Solaris machine.
Your best bet is to have all 3 folders Disk1/Disk2/Disk3 on your computer and the run the install from there. I didn't have the disk space on my computer and ran it from a shared drive.
I'm currently in the post install section trying to Configure cache, and wondering if it's still working or hung up.
The 9iAS Installation took 3 1/2 days to run - I have a 300 Mhz PC with about 380 RAM. The Cache Configuration has been running for over 26 hours.
I don't know if this helps but I hope it does.
I didn't experience any of the problems you have.
Hope this helps

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

How to install oracle8.1.5 on win 2000

how do i install oracle 8.1.5 on win 2000 operating system

Oracle 8.1.5 isn't certified to run on Windows 2000. Release 8.1.6 is though.
Alison
iSQL*Plus Team

How to install oracle enterprise edition on windows 2000

I have tried installing oracle 8.04 enterprise edition for NT on windows 2000 for several times. But it always missed listening on some serives.
could anyone help me?
Thank you!

I am installing Oracle 816 on Win 2K Server. Its installing everything except I am getting error while in the
process of creating Instance and Initializing it.
I am getting
Oracle Database Configuration Assistant Alert
"ORA-12638: Credential retrieval failed"
while in the process of copying database files and initializing database. And the process is halting
at this point with showing 85% completion. Do you think any conflict between OS files between Win 4.0
and Win 2K?
What do I have to do to resolve this.
I tried to Install on 3 machines and I get this problem on all machines. But, when I Upgrade to Win 2K from NT 4.0 and doing the Oracle 816 Installation, I am succesfull.
This is happening only on fresh Install of Win 2K.
null

Steps for installing oracle 9i AS in windows 2000

Hi,
I have windows 2000 server and i have already installed oracle 9i database in c:\oracle9ids folder.
Now i want to install oracel 9i Application server and oracle 9i Infrastructure.
I am bit confused with the procedure of installation.
Can anyone help me with the steps and sequence whether i have to install the oracle 9i application server first and if so,what should be the oracle home for this.For this should i select c:\oracle9ids (where i have installed oracle 9i database) as the oracle home or should i install this in a separate oracle home.
Similarly when i should install oracle 9i infrasturcture(is it before the oracle 9i application server installation or after this) and also what should be the oracle home for that(is it the oracle home c:\oracle9ids,where the oracle database is installed or in a separate oracle home).
Also,can anyone send me the links for these 2 manuals.
Oracle9i Application Server Concepts Guide
Oracle9i Application Server Administrator's Guide
Any help is appreciated.
Thanks

Sri --
All of the doc is available from OTN - follow the links on the left nav bar -> Documentation -> Oracle9iAS and then choose the Doc library for the specific release you are interested in. The site seems to be down right now but if you follow the links above you will find both of these on the 'Getting Started' tab.
Oracle9i Application Server Concepts Guide
Oracle9i Application Server Administrator's Guide
The installation manual and release notes are in the platform specific doc libraries - also available from the Documentation link on the left nav. These should provide the information you need to understand the steps to follow to install - if you find these steps confusing please let me know your specific comments so we can look to make improvements in the next release of the product.
I am assuming you are installing Oracle9iAS 9.0.2.x.
Let me clarify how the Oracle9iAS 902 install works.
1. Firstly, if you want to use the Oracle9iAS infrastructure - ie for management purposes/single signon/portal or other components that require metadata then you need to install the Infrastructure first.
This must be installed into it's own brand new oracle_home. This will, by default, install an Oracle9i database tha[i]Long postings are being truncated to ~1 kB at this time.

Install Oracle 9i RAC on Windows 2000

Hi there,
Can I install Oracle 9i Real Application Cluster on the Windows 2000 without using logical drives? Does Oracle 9i RAC support cluster file system on Windows 2000? If does, could you please give me an example?

Hi there,
Can I install Oracle 9i Real Application Cluster on
the Windows 2000 without using logical drives? Does
Oracle 9i RAC support cluster file system on Windows
2000? If does, could you please give me an example?
Yes, you can install oracle RAC with OCFS, see metalink note 178882.1
"Step-By-Step Install of RAC with OCFS on Windows 2000"

Solution for installing oracle 9i successfully on win XP

I have found this method to be reliable in installing oracle 9i on win XP without giving any problems.Try it out and let me know if it helped you all too.
1. De-install Oracle 9i and any other Oracle products.
2. Clean out your registry, removing all references to any Oracle product.
3. Delete all Oracle folders, including the inventory folder in C:\Program Files.
4. If installing from a CD, wait until the splash screen appears then cancel the installation. Find AUTORUN.EXE on the AUTORUN folder of the installation CD. Right click on it, select PROPERTIES, then click the COMPATIBILITY tab. Check "Run this program in compatibility mode for:", then select "Windows NT 4.0 (Service Pack 5)" from the drop down list. Click OK. Do the same for SETUP.EXE.
5. Double click AUTORUN

Hi
I download Oracle
Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
for Windows XP 2003/Windows Server 2003 (64-bit)
And try to install it on XP.
I installed it according to your explanation.
I installed from a CD and wait until the splash screen appears then cancel the installation. Find AUTORUN.EXE on the AUTORUN folder of the installation CD. Right click on it, select PROPERTIES, then click the COMPATIBILITY tab. Check "Run this program in compatibility mode for:", then select "Windows NT 4.0 (Service Pack 5)" from the drop down list. Click OK. Do the same for SETUP.EXE.
I Double click AUTORUN, click “install/deinstall products”, A message came out “ unable to start oracle installer: Please verify path for the file D:\install\win64\setup.exe”. I went to the directory D:\install\win64, Double click setup. A message came out “D:\install\win64\setup.exe is not a valid Win32 application”.
Can you help me ?

Installing Oracle 11gR2 32bit on Win 2003 R2 server virtualized in Hyper-v

I have here 2008 server 64bit with Hyper-V and inside the virtualized server 2003 R2 32bit to install oracle!!
The installation goes normal but in the end when you create the database the following message appears:
ORA-03113 end-of-file on communication channel error
or
ORA-12560: TNS: protocol adapter error
These machines are all in domain
Hyper-V with 3 GB
Logged in with administrator privileges
NONE put in the file sqlnet.ora
Forgot something?
Can anyone help?
Thanks

Thank Madrid
I'm using DBCA tool!
It is the moment of creation of database errors that occur!
Looking at the documentation under +'Check the Software Requirements'+
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support
Is it so complicated to install oracle in Hyper-V?
Is there anything else that might help?
Thanks

Unable tu install Oracle 9i Client on Win XP Professional

Hello!
I have problems installing Oracle 9i Client on Windows XP Professional. The error appears when I try launching the setup.exe file from the "Disk1" folder on my HD. The message error says something like "I can't run the set up". If somebody have any ideas please help me.

double click autorun.exe in the autorun folder.

Can't install oracle 9i DB on Window 2000

Hi all,
I have a error message with "Need Service Pack 1" when I install oracle 9i DB. I have download IE Service Pack 1 and try it again. The problem is stay still. I don't konw why? Could anyone tell me? Please.
Amy

The minimun servipack to install Oracle9i on W2k is Srvpack 2.
You can download it from Microsoft site or you can post your e-mail address to send you it.
Joel P�rez

Is it possible to install Oracle 11gR2 on a Win 7 64b Home edition comp?

If so how can I? If not, why? Frustrating

Windows Home versions are not certified for Oracle installs - so, no you cannot.
You have two options
1. Upgrade to a supported OS listed in the Install Guide - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
2. Install VM software (such as VirtualBox, free install from http://www.virtualbox.org), then download and install Oracle Linux 5.7 (free from http://linux.oracle.com) in the VM, then install 11gR2 in the Linux VM (Install Guide at http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=)
HTH
Srini

Oracle 9iAS Installation Issues, Win 2000

Hi Folks,
I'm trying to Install 9IAS on a WIN2000 PE.
I already have Oracle NT Personal Edition (download nt817personal), up and running.
My Question is do I need to use Oracle nt817ee (Enterprise Edition)
Any suggestions ?
Thanks

I agree with your 5 P's, but Oracle is killing themselves by not improving the installation issues. Oracle is in a fight to the death with Microsoft, and there are a lot of people who give up on Oracle products because the learning curve is too steep just to be able to login as Scott. I have a lot of experience with Windows and Oracle, and have installed the RDBMS on probably 50 separate machines in the last several years, yet I still cringe when I double click setup.exe since I never know if universal installer is going to abort. I'm not a Unix or Linux guru, and I tried and tried to get Oracle RDBMS 8i to install on several flavors of Red Hat, but I gave up. DB2 and Interbase both installed without the hassles. Take a look at the Linux forum on Technet, and look at the effort that some people are doing to try to get it to work. It should not be this hard. I would like to use Linux/Oracle on some of our servers, but frankly it is too hard currently. You shouldn't need a metal link account to install software on a clean install of Windows, or be a guru at writing device drivers for Linux to install Oracle on that platform.

Oracle Apps 11i under Win 2000/NT

I'm having some problems installation 11i with rapid install. I'm trying to install the visions demo but can't seem to get it right. The following are the things that I did.
1. Fresh install of Windows (2000 twice and NT server once, both without IIS install)
2. Using windowsupdate, applied all patches and rebooted
3. created USER ORACLE and USER APPLMGR. Logon as ORACLE user Copied all cd's to STAGE11i directory
4. Ran rapid install wizard and selected single node install
5. Unselected PROD option and selected VIS option
6. Entered password for APPLMGR and complete DNS name for machine and left everything else as default.
7. Rapid install completes with no errors.
Results:
Can bring up oracle install portal but can't log onto apps using logon links. I realized that OracleConcMgrVIS and the webDb listeners (2.2 and 2.5) would not come up under services. Tried starting them manually, OracleConcMgrVIS starts but can't start either WeDB Listener VIS service. What am I doing wrong??? Tried this on both Windows 2000 server and windows NT 4.0 server with similar results!!!
null

Rakesh,
No, we not bounced the database. We will get the outage only by tomorrow.Check if you get the same error after bouncing the database.
When we close the IE and login back its going in with out issue. Is there any other specific issue on why we are getting "Oracle error &ERRNO: &REASON has been detected in &ROUTINE." apart from the org_id & triggers.I guess not.
Note: 311329.1 - Unable to login: &REASON has been detected in &ROUTINE
Note: 464072.1 - Unable to login: &ERRNO: &REASON has been detected in &ROUTINE
Regards,
Hussein

Installing Oracle 8I PE for Windows 2000

I downloaded the huge zip file, unzipped it, and tried to run set up....it won't run. What am I missing?
Thanks
DDS

Hi
The following is a an excerpt of solution to Windows ME problem provided by Beau Leo:
I have helped lots and lots of people fix the installation problems and they said it does work great!
Oracle8i and 9i are not certified on Windows ME because ME is not supported. here is the following resolution:
1. Edit the WIN.INI file by adding JREW=0x00080000 at the end of [Compatibility95]
section
2. Save the WIN.INI file
3. Reboot your machine
4. Execute the setup.exe from the win32 directory
Best Regards,
Bo
PLEASE NOTE THAT ORACLE DOES NOT SUPPORT THE USE OF THIS PRODUCT IN WINDOWS ME,
BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY.
I AM NOT RESPONSIBLE FOR ANY DAMAGES OR LOSS OF YOUR DATA TO YOUR COMPUTER.
Hope that helps...

Install oracle 8.1.7 win 2000

Similar Messages

Maybe you are looking for