Install oracle 9i rac access from both node problem

Hai,
Recently we have planned to move oracle 9i rac databases to new servers. Our current configuration is oracle 9i rac (9.2.0.4) and aix 5.3 with hacmp 5.4
mksysb backup has been taken from old machine and restored in the new machine. For oracle binarys, tar have been done and restored in the new machine.
Now after restoring the database, i am able to mount and open from the one server at a time. If i try to mount the database from second machine it is hanging. Kindly help us to solve the problem.

lmon registered with NM - instance id 1 (internal mem no 0)
After the above mentioned line, no other errors.

Similar Messages

NTP(Network Time Protocol) Error whil installing Oracle 11gR2 RAC

Dear Friends,
I have installed oracle 11gr2 clusterware software in two node RAC. While i run the CLUVFY.SH, It shows error in NTP configuration.
1)I add "-x" parameter in "/etc/sysconfig/ntp" configuration file. and start the ntpd service and run the cluvfy.sh . then i got the below error.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 no
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
=============================================================================================
2)Down the ntpd service in both nodes and run the CLUVFY.SH.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 yes
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
==========================================================================
3)Based on some website advice, I down the ntpd service and move the "/etc/ntpd.conf" to another location.Then i got the below error.
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
ERROR:
PRVF-5402 : Warning: Could not find NTP configuration file "/etc/ntp.conf" on node "rac2"
PRVF-5405 : The NTP configuration file "/etc/ntp.conf" does not exist on all nodes
rac2
PRVF-5414 : Check of NTP Config file failed on all nodes. Cannot proceed further for the NTP tests
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
=============================================================
What should i do to solve this issue?? Please help me ...

Hi,
I start the ntpd start the service in both node and done the CLUVFY.SH.
The output is below,
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
rac2 passed
rac1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 yes
rac1 yes
Result: Liveness check passed for "ntpd"
Checking NTP daemon command line for slewing option "-x"
Check: NTP daemon command line
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon slewing option check passed
Checking NTP daemon's boot time configuration, in file "/etc/sysconfig/ntpd", for slewing option "-x"
Check: NTP daemon's boot time configuration
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
========================================================================================
[oracle@rac1 ~]$ /u01/app/grid/oracle/product/10.2.0/db_1/bin/cluvfy comp clocksync
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@rac1 ~]$
================================================================================
I hope the problem solved. Am i correct??

Howto install Oracle 12c RAC on a Laptop

Howto install Oracle 12c RAC on a Laptop
Hello,
Has anyone tried this! I got this article under "DBA Spotlight". the problem that I am having is with setting up the DualServer. It times outs, so something is not connecting.
This is the document: How to Install Oracle 12c RAC: a Step-by-Step Guide
This is the DSN server that you download
Pre-installed DualServer 6.94 (Local Windows DNS Server for SCAN)
http://dhcp-dns-server.sourceforge.net/
I sent a note to the owner of the document and he has not answered my question. Here is what I'm getting.
:\Users\Tammy>nslookup
      Default Server: Wireless_Broadband_Router.home
      Address: 192.168.1.1
      > server 10.154.137.1
      Default Server: [10.154.137.1]
      Address: 10.154.137.1
      > scan-f1.yuryffun.com
      Server: [10.154.137.1]
      Address: 10.154.137.1
      DNS request timed out.
      timeout was 2 seconds.
      DNS request timed out.
      timeout was 2 seconds.
      DNS request timed out.
      timeout was 2 seconds.
      DNS request timed out.
      timeout was 2 seconds.
      *** Request to [10.154.137.1] timed-out
      >
I appreciate all comments and help! Thank you.
Tammy

I suggest you just follow the steps in the lab from Oracle:
How To Deploy a 4 Node RAC Cluster Using Oracle VM Templates
Oracle already has VM templates for RAC ready to download and use.
Oracle VM Templates for Oracle RAC

How can i create/install oracle 10 rac on my single windows machine

can anyone help me to step by step install oracle 10g rac(rac environment) on my single window machine.
if its not possible then y ?
thxs

Vmware is available for both Windows & Linux.
Secondly you have to decide whether you want the guest OS (OS on which you would configure RAC) to be Windows or Linux ?
And before everything, check your PC configuration. As Tim mentions in those articles, to run this setup, you need lots of RAM n power.
Perhaps 4 GB of RAM and Core 2 Duo 2 Ghz + processor. If you are not having an appropriate configuration, it may not even run properly or your might hit memory dump errors on host OS.
Amardeep Sidhu
http://amardeepsidhu.com/blog
http://oracleadmins.wordpress.com

Installing Oracle 10g rac on linux 4 using vmware :problem

Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan

hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp

Install Oracle 11g RAC on Solaris 10

Hello,
I'm new joined DBA in my organization.
There is a requirement from a client to install Oracle 11g RAC on Solaris 10 env.
Can anybody please guide me with some doc or pdf for the steps.
Till now, i've install Oracle 11g DB on Solaris, but i'm pretty new to RAC env.
Note:
I've to do installation via commands, No GUI.
Thanks for your help.
Regards,
Gags

Hi,
Q) Can Oracle 11g Release 2 RAC be installed on Solaris (x86)??yes, you can Install it on Solaris X86
Q) Can the links of Oracle RAC installation over Unix and Linux be taken as base?? As i haven't seen any doc for installing 11g RAC on Solaris, where as it was provided in Oracle 10g.yes, you need to consider Oracle RAC installation over Unix and Linux be taken as base as base document.
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
In addition Refer:
http://www.oraclemasters.in/?p=963
thanks,
X A H E E R

Install Oracle 11gR2 RAC : Cannot remove directory bootstrap under /tmp

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a "
In order to fix the above error, I run "cluster verification utility" according to
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/cvu.htm I run the following command:
[ora11g@rac1 \]$ /home_grid/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Output:
/bin/rm: cannot remove directory '/tmp/bootstrap': Operation not permitted
./runcluvfy.sh:line 99:/tmp/bootstrap/ouibootstrap.log: permission denied
From the above output, we can see the directory bootstrap under /tmp causes the problem. The solution is to remove the directory bootstrap. I run the 2 commands:
[ora11g@rac1 tmp]$ rmdir bootstrap
Output: Operation not permitted
[ora11g@rac1 tmp]$ rm -rf bootstrap
Output: cannot remove bootstrap: Operation not permitted.
[ora11g@rac2 tmp]$ ls
Output: there is no 'bootstrap' directory.
My questions are:
First, does "cannot remove boostrap in rac1" cause that /tmp in rac2 could not be determine mount point ?
Second, can any folk help to remove the directory bootstrap under /tmp ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I have just run the 2 commands:
[root@rac2 \]# chown -R ora11g:dba /u01
[root@rac2 \]# chmod -R 775 /u01
ora11g is the user who installs the Grid and /u01 is the directory where Grid is installed and dba is the group.
I go back to Grid Installer Step 7 of 10 in rac1 and check again and see as below:
Free Space: Rac2 : /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available
Expected Value: n/a
Actual Value: n/a
The problem is not solved after run the above 2 commands in rac2.
In addition, I have run Cluster Verification Utility using the command:
[ora11g@rac1 grid]./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -r 11gR2 -orainv ora11g -verbose
Output: All of items for rac2 are passed. There is only one item for rac1 is failed as below:
Check default user file creation mask:
NodeName: rac1
Available: 0002
Required: 0022
Comment: failed
As we see above, the result of CVU command is not the same with Grid Installer step 7 of 10 (Installation Environment Verification):
CVU command doesn't find /tmp mount point problem for rac2 that Grid Installer does.
Grid Installer step 7 of 10 doesn't find user file creation mask problem for rac1 that CVU command does.
I have tried to find out whether creation mask failed for rac1 causes /tmp problem for rac2. I have changed the line "umask 002" to "umask 0022" for rac1 in each of the 3 files below and run CVU command each time for each file:
rac1:
/etc/bashrc
/etc/profile
/etc/csh.cshrc
But chang the line "umask 002" to "umask 0022" for rac1 in each of the above 3 files does not solve the problem.
My questions are:
First, why is the result of CVU command not the same with that of Grid Installer step 7 of 10 ?
Second, why change the line "umask 002" to "umask 0022" in 3 files can't solve creation mask problem for rac1 ?
Third, how to solve /tmp problem for rac2 and creation mask problem for rac1 ?
Thanks.

Installing Oracle 9i RAC under Windows XP

hi, all?
I am not good at Oracle, but I have to install Oracle 9i RAC on Windows XP(sp1) machine.
Is it possible to install it?
if so, is there any guide documents about it?
All documents which i found are talking about installing under Linux or win2k.
It didn't mentioned anything about win xp.
Thanks in advance

it is not support

Installing Oracle 11gR2 RAC Problem: ASM disks

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
At the first time, I create VM rac1. While its OS Oracle Linux 5.6 is booting, initializing ASMLib Driver OK. I create 5 ASM disks successfully using the command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: OK
Because the hard disk space of rac1 is not enough to install Database, I create VM rac1 again with bigger hard disk space (30GB). I do everything the same with that at the first time. But this time, While OS Oracle Linux 5.6 is booting, initializing ASMLib Driver failed. I create 5 ASM disks using the same command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: failed
But when I use the command:
[root@rac1 /]# /etc/init.d/oracleasm listdisks
Output: ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5
My questions are:
First, can the 5 disks "ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5" be used correctly in spite of Marking disk "ASMDISK1(2 3 4 5)" as an ASM disk failed ?
Second, how to fix OS Oracle Linux 5.6 so that initializing ASMLib Driver OK while booting ?
Thanks.

Folks,
Hello. The issue is solved by myself. Thanks.

Install Oracle Clusterware/RAC Windows x32bit or Windows 64bit ?

Hi,
What is your suggestion to install Oracle Clusterware RAC on Windows.
Why choose Windows 32 bit ?
Why choose Windows 64 bit?
What are the advantages and disadvantages?

Hi,
I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
TNS-00510: Internal limit restriction exceeded
32-bit Windows Error: 8: Exec format error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
Another point:
With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
Check this note..
*ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
There are lot services involved wich require memory and a big limitation of memory on 32-bit.
At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
Benefits of Use 64-bit are:
64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
No performance penalties for large memory
Unlimited user connectivity
64-bit Windows versions allow addressing of large physical memory sizes without using PAE
*Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
This document gives a better understanding of my perspective.
http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
Regards,
Levi Pereira

How to access Oracle 11.5.5 from another node

Hi,
I have installed Oracle 11.5.5 on Windows NT4.0. I could access it on the same machine through the internet explorer by typing http://computername.domain name:8002/OA_HTML/US/ICXINDEX.htm
Now i want to access application from another machine. How to do it?. Can i find any help documents on this & where?
Please help me on this.
Thanks & Regards,
Arun
[email protected]

Hi
i installed 11.5.5 , but when I log in , it prompts me for again to Login,
after that (ie, 2nd time), it allows to log in.
when i click on any module option, the system exits totally from the APPS.
PL. let me know if u have any solution
also let me know about how to set up client as u r disscussing,
my server configuration : NT SERVER , SP 6, 256 MB RAM, P4 40 GB
TKS
NR

How to install Oracle 11g on linux from VNC

Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
BTW, when I click on "Start TightVNC service" from Start button, I got "Failed to start TightVNC service for the following reason: Access is denied(error code 5).
The VNC on the linux server is running.
Thankyou.
Edited by: 907485 on Mar 21, 2012 7:21 AM

907485 wrote:
Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
Thankyou.we only know what you post.
where does linux reside?
where is VNC installed?

Installing Oracle 11gR2 RAC issue

I am installing Oracle 11gR2(11.2.0.3) RAC on RHEL 5.6. I am facing "TCP connectivity check failed" on my precheck using CVU
Interface information for node "hublpr4"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU
eth0   172.16.34.71    172.16.32.0     0.0.0.0         172.16.32.4     00:17:A4:77:08:10 1500
eth1   192.168.10.3    192.168.10.0    0.0.0.0         172.16.32.4     00:17:A4:77:08:12 1500
Interface information for node "hublpr3"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Address        MTU
eth0   172.16.34.69    172.16.32.0     0.0.0.0         172.16.32.4     00:17:A4:77:0C:30 1500
eth1   192.168.10.2    192.168.10.0    0.0.0.0         172.16.32.4     00:17:A4:77:0C:32 1500
Check: Node connectivity of subnet "172.16.32.0"
Source                          Destination                     Connected?
hublpr4[172.16.34.71]           hublpr3[172.16.34.69]           yes
Result: Node connectivity passed for subnet "172.16.32.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "172.16.32.0"
Source                          Destination                     Connected?
hublpr3:172.16.34.69            hublpr4:172.16.34.71            failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 172.16.34.69" and "hublpr4 : 172.16.34.71" failed
Result: TCP connectivity check failed for subnet "172.16.32.0"
Check: Node connectivity of subnet "192.168.10.0"
Source                          Destination                     Connected?
hublpr4[192.168.10.3]           hublpr3[192.168.10.2]           yes
Result: Node connectivity passed for subnet "192.168.10.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "192.168.10.0"
Source                          Destination                     Connected?
hublpr3:192.168.10.2            hublpr4:192.168.10.3            failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 192.168.10.2" and "hublpr4 : 192.168.10.3" failed
Result: TCP connectivity check failed for subnet "192.168.10.0"
Interfaces found on subnet "172.16.32.0" that are likely candidates for VIP are:
hublpr4 eth0:172.16.34.71
hublpr3 eth0:172.16.34.69
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "172.16.32.0".
Subnet mask consistency check passed for subnet "192.168.10.0".
Subnet mask consistency check passed.
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "172.16.32.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "172.16.32.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"

Try following metalink note for sorting out multicast issues.
Oracle Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1]

Install Oracle 11G, RAC with VMWare, APPS R12, and OBIEE on one server?

Dear Experts,
I'm looking to upgrade my skills, and want to learn more of:
Oracle 11G, RAC, VMWare, APPS R12, and OBIEE
My server has two quad cores (8 CPU altogether) and 16 gigs of RAM.
Years ago, I took a shots at installing RAC on multiple servers and firewire.
One thing I remember was that after I installed RAC, I was not able to use the database unless I enabled all the RAC processes on the server. So, I was not able to just boot the database and use it in the traditional single server manner.
Which I will also want to do.
1) Does this symptom/aspect/characteristic of RAC install still exist?
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?
Thanks a lot!

Hi,
1) Does this symptom/aspect/characteristic of RAC install still exist?No.
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?For learning/traning/demonstration purpose you can Install all these software on same machine.
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?There will not be any conflicts. I would suggest you to select vmware or virtual box in order to configure all these sw's.
I have done such a configuration on my laptop with i7 Quad processor, 16GB RAM and 640 GB HDD.
I have Installed 2 node RAC, 2 Node ERP and all are running smoothly without any issues.
Refer:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
thanks,
X A H E E R

Having problems in ocfs2 while installing oracle 10g rac on linux as 4

this is the frist time i am try to install oracle rac based on three PCs after installing ocfs2 when i try to configure nodes through console i see the following msg "Could not start cluster stack .this must be resolved before any OCFS2 file system can be mounted "

Please check the user guide
http://oss.oracle.com/projects/ocfs2/dist/documentation/01-cluster_start_stop.pdf
Regards
Jason

Install oracle 9i rac access from both node problem

Similar Messages

Maybe you are looking for