Install Oracle 9i RAC on Windows 2000

Hi there,
Can I install Oracle 9i Real Application Cluster on
the Windows 2000 without using logical drives? Does
Oracle 9i RAC support cluster file system on Windows
2000? If does, could you please give me an example?
Yes, you can install oracle RAC with OCFS, see metalink note 178882.1
"Step-By-Step Install of RAC with OCFS on Windows 2000"

Similar Messages

Installing Oracle 9i RAC under Windows XP

hi, all?
I am not good at Oracle, but I have to install Oracle 9i RAC on Windows XP(sp1) machine.
Is it possible to install it?
if so, is there any guide documents about it?
All documents which i found are talking about installing under Linux or win2k.
It didn't mentioned anything about win xp.
Thanks in advance

it is not support

Can not install Oracle 9i R2 on Windows 2000

I can not install Oracle 9i R2 on Win 2000. It failed at 48% with this message.
Error in writing to file C:
\oracle\ora92\oem_webstage\oem_webstage_8.jar
I tried by copying the 3 disks to my hard drive and reinstall but not success.
Help me please.
Thanks
Ken Wongho

I've been able to install 9iAS on Windows 2000 - I have the Origin database on a Solaris machine.
Your best bet is to have all 3 folders Disk1/Disk2/Disk3 on your computer and the run the install from there. I didn't have the disk space on my computer and ran it from a shared drive.
I'm currently in the post install section trying to Configure cache, and wondering if it's still working or hung up.
The 9iAS Installation took 3 1/2 days to run - I have a 300 Mhz PC with about 380 RAM. The Cache Configuration has been running for over 26 hours.
I don't know if this helps but I hope it does.
I didn't experience any of the problems you have.
Hope this helps

Steps for installing oracle 9i AS in windows 2000

Hi,
I have windows 2000 server and i have already installed oracle 9i database in c:\oracle9ids folder.
Now i want to install oracel 9i Application server and oracle 9i Infrastructure.
I am bit confused with the procedure of installation.
Can anyone help me with the steps and sequence whether i have to install the oracle 9i application server first and if so,what should be the oracle home for this.For this should i select c:\oracle9ids (where i have installed oracle 9i database) as the oracle home or should i install this in a separate oracle home.
Similarly when i should install oracle 9i infrasturcture(is it before the oracle 9i application server installation or after this) and also what should be the oracle home for that(is it the oracle home c:\oracle9ids,where the oracle database is installed or in a separate oracle home).
Also,can anyone send me the links for these 2 manuals.
Oracle9i Application Server Concepts Guide
Oracle9i Application Server Administrator's Guide
Any help is appreciated.
Thanks

Sri --
All of the doc is available from OTN - follow the links on the left nav bar -> Documentation -> Oracle9iAS and then choose the Doc library for the specific release you are interested in. The site seems to be down right now but if you follow the links above you will find both of these on the 'Getting Started' tab.
Oracle9i Application Server Concepts Guide
Oracle9i Application Server Administrator's Guide
The installation manual and release notes are in the platform specific doc libraries - also available from the Documentation link on the left nav. These should provide the information you need to understand the steps to follow to install - if you find these steps confusing please let me know your specific comments so we can look to make improvements in the next release of the product.
I am assuming you are installing Oracle9iAS 9.0.2.x.
Let me clarify how the Oracle9iAS 902 install works.
1. Firstly, if you want to use the Oracle9iAS infrastructure - ie for management purposes/single signon/portal or other components that require metadata then you need to install the Infrastructure first.
This must be installed into it's own brand new oracle_home. This will, by default, install an Oracle9i database tha[i]Long postings are being truncated to ~1 kB at this time.

How to install oracle enterprise edition on windows 2000

I have tried installing oracle 8.04 enterprise edition for NT on windows 2000 for several times. But it always missed listening on some serives.
could anyone help me?
Thank you!

I am installing Oracle 816 on Win 2K Server. Its installing everything except I am getting error while in the
process of creating Instance and Initializing it.
I am getting
Oracle Database Configuration Assistant Alert
"ORA-12638: Credential retrieval failed"
while in the process of copying database files and initializing database. And the process is halting
at this point with showing 85% completion. Do you think any conflict between OS files between Win 4.0
and Win 2K?
What do I have to do to resolve this.
I tried to Install on 3 machines and I get this problem on all machines. But, when I Upgrade to Win 2K from NT 4.0 and doing the Oracle 816 Installation, I am succesfull.
This is happening only on fresh Install of Win 2K.
null

Can't install oracle 9i DB on Window 2000

Hi all,
I have a error message with "Need Service Pack 1" when I install oracle 9i DB. I have download IE Service Pack 1 and try it again. The problem is stay still. I don't konw why? Could anyone tell me? Please.
Amy

The minimun servipack to install Oracle9i on W2k is Srvpack 2.
You can download it from Microsoft site or you can post your e-mail address to send you it.
Joel P�rez

INSTALL Oracle 10g RAC on Windows 2003. ERROR on starting services

During installation assistances try to configure and start RAC services,
but I get next message with error:
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'C:\oracle\product\10.1.0\crs/install/crssetup.config.bat'
Start output from spawned process:
clscfg: EXISTING configuration version 2 detected.
clscfg: version 2 is 10G Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: bdserver01 oracnode01 bdserver01
node 2: bdserver02 oracnode02 bdserver02
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Oracle Cluster Registry already initialized
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
bdserver01 service OracleCSService in improper PENDING state, err(997)
bdserver02 service OracleCSService in improper PENDING state, err(997)
:-(((

During installation assistances try to configure and start RAC services,
but I get next message with error:
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'C:\oracle\product\10.1.0\crs/install/crssetup.config.bat'
Start output from spawned process:
clscfg: EXISTING configuration version 2 detected.
clscfg: version 2 is 10G Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: bdserver01 oracnode01 bdserver01
node 2: bdserver02 oracnode02 bdserver02
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Oracle Cluster Registry already initialized
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
bdserver01 service OracleCSService in improper PENDING state, err(997)
bdserver02 service OracleCSService in improper PENDING state, err(997)
:-(((

Installing Oracle 8I PE for Windows 2000

I downloaded the huge zip file, unzipped it, and tried to run set up....it won't run. What am I missing?
Thanks
DDS

Hi
The following is a an excerpt of solution to Windows ME problem provided by Beau Leo:
I have helped lots and lots of people fix the installation problems and they said it does work great!
Oracle8i and 9i are not certified on Windows ME because ME is not supported. here is the following resolution:
1. Edit the WIN.INI file by adding JREW=0x00080000 at the end of [Compatibility95]
section
2. Save the WIN.INI file
3. Reboot your machine
4. Execute the setup.exe from the win32 directory
Best Regards,
Bo
PLEASE NOTE THAT ORACLE DOES NOT SUPPORT THE USE OF THIS PRODUCT IN WINDOWS ME,
BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY.
I AM NOT RESPONSIBLE FOR ANY DAMAGES OR LOSS OF YOUR DATA TO YOUR COMPUTER.
Hope that helps...

Install Oracle Clusterware/RAC Windows x32bit or Windows 64bit ?

Hi,
What is your suggestion to install Oracle Clusterware RAC on Windows.
Why choose Windows 32 bit ?
Why choose Windows 64 bit?
What are the advantages and disadvantages?

Hi,
I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
TNS-00510: Internal limit restriction exceeded
32-bit Windows Error: 8: Exec format error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
Another point:
With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
Check this note..
*ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
There are lot services involved wich require memory and a big limitation of memory on 32-bit.
At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
Benefits of Use 64-bit are:
64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
No performance penalties for large memory
Unlimited user connectivity
64-bit Windows versions allow addressing of large physical memory sizes without using PAE
*Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
This document gives a better understanding of my perspective.
http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
Regards,
Levi Pereira

Oracle 10g RAC on Windows

Installed Oracle 10g RAC on Windows... Everything was
working fine, now when I install CRS it completed at 100% and then in the configuration it gives error
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I am using VMware WorkStation 5
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
I can see my disks from both machines. Open the "Computer Management" dialog (Start > All Programs > Administrative Tools > Computer Management
I use Windows XP SP2 as the host operating system
Any suggestion?
Message was edited by:
MEXMAN

You know its not certified?
My first thought when I read the subject of this thread, and before reading what you posted, is that you've either done no research on RAC or didn't understand what you've read.
You can create a RAC cluster using any operating system certified by Oracle.
But the operating system is the least important part of creating a cluster. The questions you need to be able to address are:
1. What is your solution to created shared storage?
2. What is your solution to create the cache fusion interconnect and VIPs?
If you don't have an answer to these questions you can not build a RAC cluster.

How to install Developer 10g suite on windows 2000

Hello
I downloaded the two files namely ds_windows_x86_101202_disk1 and
ds_windows_x86_101202_disk2.
When I try to install these after extracting to one temp folder and when I run the setup
on windows 2000 OS, I am always getting the the error insert disk 1 or specify the location of the product .
Please suggest how to proceed.
Also if I extract the above files can I proceed with that or are there are any additional files to be extracted. I fact I went through all the files and folders and whereever there was archive files I have extracted them.
I need urgent help to install these files.
Thanks in advance

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rajesh at [email protected]:
I am trying to install Oracle 8 Enterprose on
Windows 2000 , but I am geting OS Error
at the beginging of the installation.
Does anybody knows whether I can install
Oracle on Windows 2000?<HR></BLOCKQUOTE>
Hi Rajesh borikar,
I encounter similar problem as you. If you have any clues, please let me know too..thanks
regards
Andrew
null

How can i create/install oracle 10 rac on my single windows machine

can anyone help me to step by step install oracle 10g rac(rac environment) on my single window machine.
if its not possible then y ?
thxs

Vmware is available for both Windows & Linux.
Secondly you have to decide whether you want the guest OS (OS on which you would configure RAC) to be Windows or Linux ?
And before everything, check your PC configuration. As Tim mentions in those articles, to run this setup, you need lots of RAM n power.
Perhaps 4 GB of RAM and Core 2 Duo 2 Ghz + processor. If you are not having an appropriate configuration, it may not even run properly or your might hit memory dump errors on host OS.
Amardeep Sidhu
http://amardeepsidhu.com/blog
http://oracleadmins.wordpress.com

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Oracle 8i Client Setup - Windows 2000

We have just installed Oracle 8i on a Windows NT server, and are using the standard LISTENER configuration.
On the client side, we are trying to use Windows 2000. When the install process goes through the setup routine, it keeps wanting to use NAMES SERVER as the way to connect to the server.
There does not appear to be anything that we are doing that would change this set up, ad yet, we can not seem to generate a TNSNAMES.ORA files on the client.
ARe there any known problems with using a Windows2000 client to a WindowsNt server, and if not, what advice might anyone have?

Hi Douglas:
Can you email me copies of the following:
tnsnames.ora
listener.ora
sqlnet.ora
If any of the files contains a link to the pfile send me that as well.
Thanks
Jay

11.5.9 + Oracle Fail Safe on Windows 2000

Hello, I need to know if Oracle E-Business Suite 11.5.9 is it certified against Oracle Fail Safe on Windows 2000, I just checked the certification matrix on metalink, but, there's no information about 11.5.9.
Thanks in advance,
Marco Correa
Technical Consultant
EP e-solutions
[email protected]

user4428447 wrote:
Can I Install Oracle Fail Safe with Oracle 11.1.0.6.0 on 64 bit Servers ? If Yes how otherwise what is the alternative ?
Yes ....
http://download.oracle.com/docs/cd/E16161_01/doc.342/e14976/toc.htm#insertedID3
http://www.oracle.com/technetwork/database/windows/index-082893.html
Regards
Rajesh

Install Oracle 9i RAC on Windows 2000

Similar Messages

Maybe you are looking for