Install Oracle EBS on Windows Server 2003 R2 hosted on Oracle VM VirtualBox

I had run md5sum to verify the integrity of the stage 12.1.1 area directory successfully
installation process stopped on Step 3 of 5 at 53 % (The lower Status bar shows 92% ) with the common error "Oraccle JAAS Exception : 9"
I had Install VS 2005 express with latest updates
I had install the latest cygwin 1.71 and enusre that the make version is 3.81
i review all the releated docs. except doc No. ID 1333997.1 cause i cannot execute the steps inside
this problem drive me crazy
thank you in advance for your help :)

Every thing except A new Rapid Install startCD (Patch 11072566) because I don't have access to downloads patches from my oracel account

Similar Messages

  • JRE Error : while Install oracle 10gR2 on Windows Server 2003

    Hello,
    I am trying to install a Oracle 10gR2 on windows server 2003.
    I have unziped the files and when I run the oui.exe it gives the below error:
    cannot find any matches for wildcard specification "../stage/components/oracle.swd.jre/1.5.0.0./1/DataFiles/*.jar
    Error : JRE missing in Scratch Path
    I tried changing the oraparmaini file but it did not allow to make any changes.
    Not sure if its looking for any particular java files.
    What should i edit ,to specify the java location.
    Thanks

    What exactly did you unzip? This error occurs if there are several zip-files extracted to different target locations. But - if I remember correctly - 10gR2 database is only one zip-file, so you should not face this issue. JRE for OUI is part of the downloaded software,so you don't need to specify a location for JRE, OUI knows where to find this.
    Werner

  • About memory issue during installing Oracle 11g on Windows Server 2003

    Hi, all
    When I installed Oracle 11g on Windows Server 2003 which the server is a virtual server, Oracle only can detect 2G memory.
    But there are 4G memory with my server.
    I want to know if the Oracle 11g's new feature or the virtual server lead the issue.
    Also , I want to get your help to resolve the issue, thanks a lot.

    Let me get this straight:
    You have created some virtual machine using someone's unknown VM software.
    You have installed Windows Server 2003 (perhaps, but not confirmed 32-bit) to that VM.
    You have allocated 4GB of memory to the VM (we guess ... not sure I'm ready to take your word on this)
    You are attempting to install Oracle 11g (presumably 11gR1 32 bit for Windows) in the VM
    And the Oracle (installer?) seems to be reporting that you only have 2GB RAM.
    Since I personally have installed Oracle 11g 32bit for Windows on Windows 2003 server with 4GB RAM and had no issues, I would be investigating the (unknown) VM environment.

  • Can't get past OCX error when installing ODAC 11g on Windows Server 2003

    I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
    If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
    Thanks!
    Michael Young
    Latitude Geographics
    Victoria, BC

    Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
    So you say you checked instant client and you still got the error? That doesn't add up...
    Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
    Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
    You can do this as follows:
    1) Under the download links on OTN, go to the database download page.
    2) Download the Oracle Database client 11g for Microsoft Windows
    3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
    4) Close the installer
    5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
    6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
    This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
    Christian

  • HELP! Oracle 9i on Windows Server 2003

    Hi, if I go to download the 9.0.2.1.0 release 2 of Oracle 9i for Windows Server 2003 there is only a patch and another small zip file, and not the full 3 Disk zip files? Then if you read the release notes under the zip links it points to the 9.0.2.1.0 release 2 of Oracle 9i for Windows 2000/XP? And then talks about applying some patches...
    Can someone confirm that I do need to install the 9.0.2.1.0 release 2 of Oracle 9i for Windows 2000/XP on the Windows 2003 Server and then apply these patches?
    TIA

    This is the release option for the Windows 2003 Server:
    Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
    for Windows Server 2003 (32-bit)
    but like I mentioned above it only has a patch and another small zip file which is obviously not the complete Oracle9i database:
    Here is the link to the release notes:
    http://www.oracle.com/technology/software/products/oracle9i/htdocs/win2k3soft.html

  • Oracle 10g on Windows Server 2003 Standard 64bit

    We are running Oracle 10g on Windows Server 2003 Standard 64bit Edition. I am NOT a DBA, so forgive my ignorance.
    We have 16GB of physical memory in this server. I was told by a DBA that Oracle runs on "a single process", and because of that, he said that Windows Server 2003 Standard will only allow 2GB max for a single process.
    Can anyone confirm this? Thanks.

    This sounds more lika a Windows issue. If both Windows and app is "64-bit", I would expect the user virtual address space (per process) to be in the TiB range, if not larger.
    (The said 2GiB limit applies to a 32-bit system.)
    Message was edited by:
    orafad

  • Error running universall installer using Oracle 11g on Windows server 2003

    Hi,
    I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
    Checking swap space: 0 MB available, 500 MB required.
    Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
    Thanks,
    Ant

    Hi;
    For swap problem, please check:
    Swap space problem on Windows XP
    http://www.pcnineoneone.com/howto/swpfile1.html
    For remove process please check:
    Oracle 11g on Windows Srv 2003
    WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
    Regard
    Helios

  • Oracle 10gR2 on Windows Server 2003 R2

    What is the patchset for Oracle 10gR2 on Windows Server 2003 R2? I have check 'Patches/Updates' tab but the patch p5337014_10203_WINNT.zip is ONLY dowloadable from Microsoft Windows (32 bit)
    platform? Is there a separate 10.2.0.3 patch for Microsoft Windows 2003 (x86)
    Version 2003 R2? Please advice.
    My current Oracle version is 10.2.0.1 and I am trying to upgrade to 10.2.0.3

    I don't think that this is the place to ask about downloads external to OTN. See forum description. Questions about the patches from Metalink (after searching/reading existing Notes and still not coming up with a definitive answer) should in general be directed to Metalink (e.g. open a SR).
    With that said.. If you are asking on how to retrieve the patch set via Metalink interface, then you should turn to Patches & Updates (one of the main tabs). Use e.g. Simple Search or Quick Links to the Latest... to drill down.
    When you have found a patch set, the Patch Set readme documents system requirements and other vital information.
    If you are looking for other information regarding patches and patching, the first place to look is again Metalink. Certification and supportability information can be found via Certify tab. There are several "tactical" Notes such as 161549.1 and 316900.1 useful for supporting your own procedures and for finding further information.
    Edited by: orafad on Aug 24, 2008 12:39 PM

  • Can't install DPM agent for Windows Server 2003

    Hi,
    We have DPM 2012 backup server.i try to install DPM Agent on Windows server 2003 PC. but installation failed.below error are Occured.
    Install protection agent on (serverName.domain name) failed:
    Error 347: An error occurred when the agent operation attempted to create the DPM Agent Coordinator service on (serverName.domain name).
    Error details: %1 is not a valid Win32 application
    Recommended action: Verify that the Agent Coordinator service on(serverName.domain name) is responding, if it is present. Review the error details, take the appropriate action, and then retry the agent operation.
    HOW CAN SORTED OUT FOLLOWING ISSURE
    Thanks,
    Gayan

    Hi,
    The below blog outlines the needed steps for protecting
    Windows Server 2003 computers using Data Protection Manager 2012 R2.
    http://blogs.technet.com/b/dpm/archive/2014/06/11/details-on-protecting-windows-server-2003-computers-using-data-protection-manager-2012-r2.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
    answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

  • Install Oracle 10g on Windows Server 2003 Enterprise Edition

    I have a machine with the following specs:
    Windows Server 2003 Enterprise Edition
    16GB Memory
    1.2TB Storage
    I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?

    mrp wrote:
    I have a machine with the following specs:
    Windows Server 2003 Enterprise Edition
    16GB Memory
    1.2TB Storage
    I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
    More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
    Oracle Database Scalability on Windows
    * Support for Very Large Memory (VLM) Configurations
    * Windows 4 GB RAM Tuning (4GT)

  • Oracle 11g on Windows server 2003

    I've oracle 11g installed on Windows Server 2003.
    I have installed oracle 11g twice, so wasn't sure how to uninstall one version without effecting the other.
    There are a few databases set up, none of which are now working.
    Trying to connect using mysql client, or the oracle11g client results in TNSListener errors:
    'TNSListener does not currently know of service requested in connect descriptor'
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
    ction
    Start Date 02-MAR-2009 11:54:42
    Uptime 0 days 3 hr. 30 min. 1 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File c:\apps\oracle\product\11.1.0\db\network\admin\listene
    r.ora
    Listener Log File c:\apps\oracle\diag\tnslsnr\selene\listener\alert\log.
    xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=selene.compsci.cs.tcd.ie)(PORT=1521)
    Services Summary...
    Service "cs.compsci" has 1 instance(s).
    Instance "cs", status READY, has 2 handler(s) for this service...
    Service "cs_XPT.compsci" has 1 instance(s).
    Instance "cs", status READY, has 2 handler(s) for this service...
    The command completed successfully
    Trying to modify the database (using Database Configuration Assistant) results in the error:
    'there is an error in creating the following process: c:\apps\oracle\product\11.1.0\db\bin\sqlplus.exe -S /NOLOG the error is: Error 6 initializing SQL*Plus Messaging file sp1<lang>.msb not found SP2-0750: You may need to set ORACLE_HOME to your oracle software directory'
    If there are forums you would recommend to a completely new oracle sysadmin please let me know.
    Many thanks.

    I recommend you read the '2 Days DBA' manual in order to get a basic understanding. It may be necessary to uninstall the current installation(s), especially the last error message looks like a corrupted environment.
    Werner
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28301/toc.htm
    Edited by: oradba on Mar 2, 2009 7:57 PM

  • Cannot Install Portal 10g on Windows Server 2003

    Downloaded Portal 10G from downloads server (as_windows_x86_portal_wireless_101200) to a new Windows 2003 Server. Attempt to install, get the series of messages "checking prerequisites" ending with "All installer requirements met."
    At that point the DOS window disappears, and nothing else visible happens. The "checking prerequisites" messages are also written to a log file in
    c:\program files\oracle\inventory\logs
    which contains no other information after the message "All installer requirements met."
    However, in the server's event log I get two entries:
    First...
    Application Error:
    Faulting application setup.exe, version 0.0.0.0,
    faulting module unknown, version 0.0.0.0,
    fault address 0x00000000.Followed by...
    DrWatson:
    The application, C:\Documents and Settings\All
    Users\Documents\Downloads\
    as_windows_x86_portal_wireless_101200\
    Disk1\setup.exe, generated an application error
    The error occurred on 03/23/2005 @ 13:09:23.531
    The exception generated was c0000005 at address
    0020224D (<nosymbols>)After I repeat these steps several times I still get the "Application Error" log entry, but the "DrWatson" error is replaced by a simpler message
    Application Error:
    Fault bucket 00134882.I noticed another recent entry in the forum that describes a similar problem -- I entered this one to insure that you had as much information as necessary to diagnose the problem. If there's any other information you would like please let me know.
    Thanks in advance!

    mrp wrote:
    I have a machine with the following specs:
    Windows Server 2003 Enterprise Edition
    16GB Memory
    1.2TB Storage
    I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
    More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
    Oracle Database Scalability on Windows
    * Support for Very Large Memory (VLM) Configurations
    * Windows 4 GB RAM Tuning (4GT)

  • How to install rootsupd.exe on windows server 2003?

    hello
    i need to update the root certificates. but i can't use "rootsupd.exe", it's only for windows xp...
    there doesn't seems to be a similar update for windows server 2003, correct?
    how can i solve my problem, do i need to install the certificates manually? if yes, how does this work?
    thank you very much!
    best regards, jan
    regards, jan

    "when ich click on "rootsupd.exe" in my windows server 2003 web edition virtual machine (virtualbox), nothing happens - i can't see any actions after clicking that file... and i don't think that behavior is usual...?"
    same behavior on windows 7 (x64) workstation - nothing happens after clicking.
    maybe i need to extract it, and install the files manually?:
    - authroots.sst
    - delroots.sst
    - roots.sst
    - updroots.sst
    regards, jan

  • Symantec antivirus Best practice for oracle database on windows server 2003

    Hi all,
    I have an oracle database server on windows server 2003 platform of version 10.2.0.4. what would be best practice of running symantec antivirus on that server as well as database file exclusions from scanning them.
    My server had rebooted unexpectedly for many times. in event log i have id as 6008. what may be cause of it..?

    Normally, you don't run a virus scanner on a database server because your database server isn't vulnerable to viruses. It's behind firewalls, people aren't reading mail on it, people aren't plugging thumb drives into it, etc. If you do decide that you need to run a virus scanner on a database server, at least exclude the Oracle data files from the scan. Oracle gets very unhappy if someone else tries to open its data files (or, worse, if someone opens a data file before it gets the chance to acquire exclusive access).
    Justin

  • Needed steps for installing oracle 10R2 on windows server 2003

    Hi to All,
    Can anybody give me steps for how to install oracle 10R2 on windows 2003 server in production environment and what is the preinstallation task and postinstallation task.
    Thanks and Regards
    Mohd Khaja

    There is one pre-requisite that is missing from the documentation - ensuring that the administration team is adequately trained.
    Since you are asking this question, I wonder whether your team is properly prepared for, and aware of, the possible nuances or changes from default that might be relevant to your environment.
    For example, is your team familiar with the concept of Flashback Recovery Area and how it may fit, or conflict with, your production needs? Use of RMAN? Location of Oracle software Inventory and implications in your OS-level backup? How to configure both the software and the database to meet your Service Level Agreement requirements.
    The referenced document is an excellent first step, as it asks some of the questions. If you are serious about production stability, you want to go through that as well as get appropriate level of expertise in your shop.

Maybe you are looking for

  • Best Practice: changing a user's short name?

    I administer the OS X Servers and user accounts at my school, where typically a few teachers will come back from the summer having gotten married and changed their names. We use a standard for usernames of first letter of first name and last name, wh

  • ME1P Report

    Hi Experts, I want to have ME1P Purchase Order Price History SAP Standard Report want to export into Excel Format. How to do it?  Otherwise, I have to develop this report  or what? can anybody clarify the same. Thanks in advnace KK

  • Automatically prompt to save PDF when Print Preview for Purchase Order?

    We recently upgraded to EP7. I have an end user that does our PO's. She swears up and down that she used to be able to go into any given PO, be it new or existing, and click on the print preview button. She says when she did this she was prompted to

  • Duplex printing of multiple copies of single page

    I really like that the settings for printing are retained so you can leave it set to duplex rather than having to select it each time. Although I do get caught with not resetting the number of copies on occasion. I do a lot of printing and like to co

  • Message Number NR751

    Hi all, I am facing a problem with billing document reversal through SD. When i try to cancel a billing document, it is giving me the following error relating to Number ranges: For object RF_BELEG 1000, number range interval 22 does not exist FBN1 Me