Install Oracle Forms and Reports 11g (11.1.1.4)

Dear Gurus,
I would like to install Oracle Forms and Reports 11g (11.1.1.4) on Windows 2012 Server. So could you please suggest me whether Windows 2012 is certified or not for installing Oracle Forms and Reports 11g (11.1.1.4) .
Thanks & Regards,
Satish Kumar Sadhu.

Hi Satish,
Forms 11.1.1.4 is not certified for Windows Server 2012. Further more, no 11g Forms release is actually certified by Oracle to run on Windows Server 2012.
I would use Windows Server 2008 and use Forms 11.1.2.1 (11gR2). 11gR2 is the best release from Oracle and will run much better than Forms 11.1.1.4.
For a peace of mind, you can check My Oracle Support - Certifications Tab and/or the published Certification Matrices below:
11gR1 Matrix (For releases 11.1.1.x): http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
11gR2 Matrix (For releases 11.1.2.x): http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls
Thanks,
Gavin

Similar Messages

  • Hw to install oracle forms and reports 11g builder on windows machine

    HI Guys
    i need to install oracle forms and reports 11G builder on windows machine for devlopers.. do anybody know from where i can download them and install them on developers machine. if anybody know steps of them .. that will be great..
    Regards,
    Devender

    Maybe this thread will help you: Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32

  • Problem installing Oracle forms and report in windows 7

    I have a problem while installing Oracle forms and reports in windows 7 64 bit
    The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:619)
    So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
    But I am unable to get wls version 10.3.2.
    For better understanding I am listing my installers :
    (I) Windows 7 Ultimate 64 Bit
    (II) (Oracle 11g) win64_11gR2_database (1 & 2)
    (III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
    (IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
    (V)accessbridge-2_0_2-fcs-bin-b06
    (VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
    (VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
    (VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
    (IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
    (X)wls1033_oepe111150_win32.exe
    (XI)wls1035_win32.exe
    (XII)wls1035_oepe111172_win64
    (XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
    After the installation while configure the forms reports, I am stuck while creating domain.
    steps I follow is :
    (i) Install Windows 7 Ultimate 64 Bit
    (ii) (Oracle 11g) win64_11gR2_database (1 & 2)
    (iii) wls1033_generic.jar
    (iv) accessbridge-2_0_2-fcs-bin-b06
    (v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
    (vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
    Please any body help, for the installation of oracle forms and reports.
    I have a formatted Windows 7 Ultimate
    Where I have installed Adobe Acrobat Reader
    IIS server from windows installer
    Now I want to know the exact procedure so that i can run the forms and report in my machine.
    This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
    Please specify all the steps
    Furthermore if Another software I have to download then please tell me.
    And I will be grateful if you specify the mistakes in my side.
    Looking forward with anticipation.

    Solved, Thank you

  • Error while configuring Oracle Forms and Reports 11g

    Hi,
    I have been trying to install oracle forms and reports from last 5 days.
    I have installed weblogic server 10.3.6
    and trying to install forms and reports 11.1.2
    Earlier while installing I did not configure it as it was giving some error so I just installed it but not again I have to configure it and I am getting the same error its as follows:-
    INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
    Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install.
    I have latest version of WLS but still its not accepting.
    Please help me guys , struggled a lot for it...What shall I do?

    Thanks Guys for you suggestions I came one step foreward
    For this I downloaded the exact version 10.3.5 and problem got resolved.
    But now getting new problem at the end of configuration part on Creating Domain, process is getting stuck. I waited for more than an hour but still progress is 0%.
    Edited by: 966714 on Oct 26, 2012 7:25 PM

  • Help me install oracle form and report 9.0.4 on red hat AS 4 x86

    i installed oracle database 10.0.2 on my red hat AS 4 x86 in /u01/app/oracle/product/10.0.2/db_1. Now i want to install oracle form and report 9.0.4 on my computer in /u02/app/oracle/product/9.0.4
    The oracle installer checks for required packages. It will produce the following list of missing packeges:
    Package gcc-3.2.3-20 is missing
    Package compat-gcc-7.3-2.96.122 is missing
    Package compat-gcc-c++-7.3-2.96.122 is missing
    Package compat-libstdc++-7.3-2.96.122 is missing
    Package compat-libstdc++-devel-7.3-2.96.122 is missing
    Package setarch-1.3-1 is missing
    Package sysstat-4.0.7 is missing
    Package gnome-libs-1.4.1.2.90-34.1 is missing
    Package libstdc++-3.2.3 is missing
    Package compat-libstdc++-devel-7.3-2.96.122 is missing
    Package compat-glibc-7.x-2.2.4.32.5 is missingbut i installed newer versions of them. so can i continue to install without missing packeges??? and how to install missing packages because they conflict with packages i installed.
    i tried to continue installation without missing packages and have some errors:
    "Error in invoking target 'agent' of makefile /u02/app/oracle/product/9.0.4/sysman/lib/ins_sysman.mk"
    Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/sqlplus/lib/ins_sqlplus.mk"
    Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/plsql/lib/ins_plsql.mk"
    Error in invoking target 'relink' of makefile /u02/app/oracle/product/9.0.4/precomp/lib/ins_precomp.mk"
    Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/webcache/lib/ins_calypso.mk"
    Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/network/lib/ins_net_client.mk"
    Error in invoking target 'webm-install'(or genm-install or gen-install) of makefile /u02/app/oracle/product/9.0.4/forms90/lib/ins_forms.mk"
    Error in invoking target 'proxy install' (runm-install,server-install,cgi-install,cli-install,conv-install,qv-install) of makefile /u02/app/oracle/product/9.0.4/reports/lib/ins_reports.mk"
    and error in Configuration Assistants:
    "output generated from coniguration assistant "oracle net configuration assistant":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/jre: relocation error
    ":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/libjava.so: symbol_ _libc_wait, version Glibc -2.0 not defined in file libc.so.6 with link time refrence
    Someone help me!!!
    Thanks.

    The requirements for installing 10.2.0 and 9.0.4 on RHEL4 differ - 9.0.4 is based on older versioned RSFs and require linking against older compatibility libraries.
    The OUI may incorrectly complain if later versions of the required/pre-requisite packages really are installed - this should not be a problem functionally, however.
    The latter errors you report, however (make, relocation error, glibc/symbol), are symptomatic of trying to link with/against incompatible gcc/glibc versions. Try installing the following additional compatibility files (appropriate for your architecture);
    - http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-oracle-rhel4-1.0-5.i386.rpm
    - http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-libcwait-2.1-1.i386.rpm
    If you have not already done so, I suggest you create and use (i.e. source) separate environment definition files when working with each product/version environment. For 9.0.4, ensure that you specify environment variable LD_ASSUME_KERNEL=2.4.19 before installing 9.0.4 (or relinking).
    If you have MetaLink access, refer also to Note.315832.1, Note.389811.1.
    Message was edited by:
    mychan

  • How to install oracle Forms and Report 10g in windows XP OS

    How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
    It is working good.
    please help me this issue.
    please give the steps..............
    Thanks
    Rajeev

    Hello Frank,
    for development, you need to install Oracle Developer
    Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
    What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
    Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
    Best regards,

  • Install oracle forms and reports in ubuntu gusty gibbon

    Hi,
    Can anyone help me in installing oracle forms and reports on ubuntu. You can send me the link or email me.
    Regards
    Anup NAIR

    Which version r u planning to install? 6i or 10g?
    If you are planning for 10g , I think it is not supported by Oracle.
    I found the below link which tells step by step process though you need to do your own research as well.
    http://www.eckford.ca/Sympatico/htdocs/ODS_Install.html
    Please let me know whether it worked or not.
    I am also planning to install it on BOSS Linux.

  • How to install Oracle Form and Report 6i on existing database

    Hi all please help me,
    My system is rhel 3 (update 6). My question is how can i install Oracle form and report 6i on my machine, which is already have database 10g R2? I known i have to create two separate ORACLE_HOME. Since i already had database 10g R2, can i just go head install Oracle form and report 6i on separate ORACLE_HOME? or i need to remove database 10g R2 first, and then install Oracle form and report 6i
    Thanks in advances

    << Why Forms/Reports 6i and not something later, BTW? >>
    Presumably he has to support a client/server application. They haven't all disappeared overnight, despite what Oracle tell everyone.

  • Installing oracle forms and reports 6i

    Hi
    If I install oracle forms and reports first on win xp pro, then will I be able to install database after that using the oracle installer from the CD?
    When installing oracle forms and reports 6i, I get a screen says which product u want to install?
    1. Forms builder
    2. Forms server
    3. Report builder
    4. Report server
    Whats the 2 and 4 used for? do I have to give the same oracle_home path for 1 and 2?

    Uninstall Oracle client from your PC and then install Forms .It will work.
    Regards
    Saroj.

  • Query about to download Oracle Forms and Reports 11g

    I have a Windows vista (Home basic).
    I am trying to download Oracle Forms and Reports 11g to learning purpose from this link.
    [http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html]
    there is two links to download Oracle 11g for windows:
    Windows x86
    Windows 64
    Should i use Windows x86 link?
    please suggest.
    Thanks!
    Edited by: 968895 on Dec 8, 2012 2:36 AM
    Edited by: 968895 on Dec 8, 2012 2:58 AM

    Should i use Windows x86 link?Well, it depends on your OS. Anyway, look at Installation of forms 6i and 11gR2 in a home PC

  • Can i start oracle forms and reports 11g services in linux with opmnctl ?

    Hi:
    I am so confused with weblogic and forms 11g that i don't know nothing at all looll :)
    Someone told me that to start oracle forms i need to this
    [oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
    This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...
    Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
    Regards
    Ricardo

    Hi Ricardo,
    Someone told me that to start oracle forms i need to this
    [oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
    This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...After starting WLS_FORMS, you can very well send it to background.
    Press Ctrl+Z and then type bg it will move it to background
    >
    Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
    with just opmnctl we cant run Forms I believe, we need to have WLS_FORMS also running ..
    Forms requires ohs or wc to be up and running along with WLS_FORMS , thats is what is my understanding ..

  • Instalation Oracle Forms and Reports 6i

    Hi
    Where can I a tutorial about instalation of the Oracle forms and reports 6i ?
    Tia
    using 9.2.02

    Its just executingbthe setup.exe and following the dialogs. Make sure you choose a separate Oracle-Home.

  • Oracle Forms and reports 11g release 2

    I would like to know if there is any documentation of High availability active-active solution for oracle forms and reports configuration (regardless of platform restriction) , oracle docs/meta link docs are welcomed :)

    Samadulhaq wrote:
    I would like to know if there is any documentation of High availability active-active solution for oracle forms and reports configuration (regardless of platform restriction) , oracle docs/meta link docs are welcomed :)
    Please see these MOS docs.
    Examples of Building Highly Available, Highly Secure, Scalable OracleAS 10g Solutions [ID 435025.1]
    Understanding Reports Execution from Forms Under High Availability [ID 363699.1]
    Upgrade Planning for Fusion Middleware 11g - FAQ [ID 1073206.1] -- Where to start reading, if upgrading a "distributed" and/or "high availability" OracleAS 10g architecture to FMW 11g?
    Thanks,
    Hussein

  • Install fmw forms and reports 11g

    i try to install forms 11g but i have problem in the configuration phase : creating ASINSTANCE failed
    i have windows servver 2003 sp2, 3GHz 3G ram\
    i install WLS
    i install the MS loopback adapter

    You don't specify your OS architechture. If you are on a 32-bit Windows 2003 Server, you can install the 32-bit (x86) version. However, if you are running the Windows 2003 Server 64-bit (x64) version, you MUST use the x64 installation media. This also involves manually installing a 64-bit JDK, before installing WebLogic. The 32-bit WebLogic will install a 32-bit JDK, which is not compatible with the 64-bit version of Fusion Middleware.
    I believe the complete installation instructions for 64-bit Windows was posted here on the forum at some point. I know from personal experience, that if you try installing the 32-bit FMW on a 64-bit Windows, you will encounter errors like the one you describe.
    Hope this helps,
    Jacob

  • How to install Discoverer 11g on Web Logic Server with Forms and Reports 11g Rel2

    Hello,
    We finally started to migrate from Oracle iAs 10g Release 2 to Oracle Forms and Reports 11g Release 2 using Web Logic. I don't see an option to install Discoverer on the server.
    My OS: windows 2008 R2
    Installed Web Logic 10.3.6
    Forms & Reports: 11.1.2.2.0_64 (64 Bit Forms)
    How do I install Discoverer Plus in 11g? All I can find is Discoverer 11g Desktop/Administrator to run on User work Station. We were using discoverer Plus in 10g iAS.
    Thanks
    Rao

    907485 wrote:
    Hi:
    I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
    under that I have
    Accept clipboard from viewers
    Send clipboard to viewers
    Send primary selection to viewers
    From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
    What is next? How do I connect to the server. (When I login I used hostname:1)
    Thankyou.we only know what you post.
    where does linux reside?
    where is VNC installed?

Maybe you are looking for