Install oracle goldengate at ASM for data replication in RAC system?

Hi Experts,
We have 2 RAC server and each server have a 4 nodes RAC with 10R2 database in linux.
We will install oracle goldengate as data replication between two RAC servers.
Our database install on ASM in SAN box in linux
Based on Goldengate install requirement, 16. Set a shared driver that is accessed by each RAC nodes
and install goldebgate on shared driver.
As I understand, can we install goldengate on ASM that is shared by each node?
Or we MUST set up other shared driver ( NO ASM) for installation of goldengate.
Please advise me?
Thanks
Jim

http://www.oracle.com/technology/products/goldengate/10/whitepapers/ha-goldengate-whitepaper.pdf
This will answer your questions.

Similar Messages

Installing Oracle Database with ASM on Oracle VM for SPARC

We're installing Solaris 11 and Oracle VM for SPARC so we can install Oracle Database with ASM. There is a requirement when creating the database that the raw disk have an owner that is the same as the database. Everytime we try to change the owner it will always show that the owner is root.
Any ideas?

Hi
Please let me know from where you are allocating ASM raw disks for the guest domain.
i hope you are changing the disk permissions using chown -R
Also confirm the permission using command # ls -IL /dev/rdsk
Regards
AB

How to install Oracle Change Management Pack for 11g database.

Hi,
I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
Oracle Configuration Management Pack
Oracle Data Masking Pack
Oracle Diagnostic Pack
Oracle Tuning Pack
using following URL
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
Regards
DBA.

As far as I could understand, this is a part of Oracle EM/Grid installation:
The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

How to install oracle 11gR2 Grid Infrastructure for standalond server

Hi Experts,
we do not want to install ASM. under this condition, does any expert install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5 at file system?
Please share tip and experiences of installed oracle 11gR2 as single instance include install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5. no one node RAC configuration.
If we do not install 11gR2 Grid Infrastructure for standalone server . which function will be lost? restat server only?
Thanks
Jim

Grid Infrastructure automatically uses Oracle Restart as default if you're installing Standalone. You can turn this off using crsctl ('disable has', I believe).
According to the inference in the install docs (http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/oraclerestart.htm#CIHCBGCC), you can install 11gR2 without Grid Infrastructure, but you lose ASM and Restart.

How to install Oracle 10g ODBC driver for win 64 bit?

I need to install Oracle 10g ODBC driver for win 64 bit, I donot know how to do that,
where to find the driver....
The driver 10.1.0.5.0 25-Apr-2006 2.1 MB isnot for 64 bits Win server 2003.

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

Howto for install Oracle Client or ODAC for W2k8R2?

Hi all!
I want know if it gives a Oracle Docu for installing Oracle Client or ODAC for Windows Server 2008 R2 64bit. I have a MS SQL 2008 Server and want make a linked Server to an Oracle 10g RAC-Database (10.2.0.4) and want know if i must only install the Oracle Client or did i also need ODAC?? And i have read, that it is better to install by the Client 32bit and 64bit from Oracle Client. So what is the best way to make a linked Oracle-Server on my MS-SQL 2008 on Windows 2008 R2? Hope someone have a positiv answer. Thx
Greetz
Franco

Hi,
No, you don't need to download the Grid Client infraestructure file. That's a tool to install on servers.
The problem is that you are downloading a version of 11.2 in 64 bits, and 11.1 in 32 bits. So maybe they hay changed something between 11.1 and 11.2 that you dislike.
You could download the 64bit version of 11.1 client, but however, you can manually create a tnsnames.ora if you want. You could use netca for that purpose.
Regards,
Mario Alcaide
http://marioalcaide.wordpress.com

Installing oracle 11g with ASM

Hi ,
Thanx for priviuos supportss.
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
Kindly provide me any guidence / steps regarding same as i havent configured this yet..

user12045405 wrote:
Thank u very much for interest ...
version = 11.2.0.2
Can u plz ans my below questions :
1.When we say ASM , is it considedred as a Grid Infrastructure ASM is one component of Grid Infrastructure. You can't have ASM without it.
2.What is ORACLE RESTART , do i really need to install it...It is also part and parcel of Grid Infrastructure - at least for a stand-alone.
there is an entire forum dedicated to GI installation, located [url https://forums.oracle.com/forums/forum.jspa?forumID=62]here
>
And fwiw, if you run the GI installer, one of the options is gives is to Install Grid Infrastructure for a standalone server. Pretty painless as long as you have correctly configured your disks that will be used with ASM.
kindly revert.........Edited by: EdStevens on Feb 28, 2013 7:25 AM

How to Install Oracle 11g on Linux for Power?

I've installed RedHat Enterprise Linux 5.4 on IBM PowerPC server.
Now I want to install Oracle 11g on it. But there are no Oracle 11g downloads for Linux for Power.
Is there any workaround so Oracle 11g can be installed on Linux on Power?

Hi,
I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
Cheers,
David
OCP 9i
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

How to install Oracle BPEL Process Manager for OracleAS Middle Tier

hi,
i need to install BPEL process manager, so i download the following file from otn
1.soa_windows_x86_101310_disk1
2.soa_windows_x86_bpel_101310
here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
so i start to complete the pre-installation task
1.installed Oracle database 10g
2.Run the Integration Repository Creation Assistant on the Database
3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
and installed according to the Oracle application server installation guide.
installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
the next screen is select installation type here there are two types named
1.BPEL process Manager for Developer (371MB)
2.BPEL process manager for Oracle AS Middle tier (107MB)
i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
pop up window opens with title dependencies
error:
BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
Thanks in Advance
Aswath Thaniga

If you choose the developer version you will be fine.
If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
The bin directory is just the executables for that home, its not the actual. home.
cheers
James

Problem to install Oracle Application Server, required for BI EE

Hi all
I want to install Oracle BI EE and it need OracleAS wich I can install from Oracle SOA suite (2nd choice of the installation type). But in the setup progression of AS, I had a message that the ORACLE HOME exist.
I had an instance of SOA suite installed, but I have uninstall it and remove the oracle home from system variables.
in my machine, I have : Windows Vista, Oracle database 11g, JDeveloper 10.1.3.3, Oracle 10 XE.
Any help please !!!!

The standard installation give me thoses features at the end :
with the following features:
Oracle Business Intelligence ODBC Driver
Oracle Business Intelligence JDBC Driver
Oracle Business Intelligence Systems Management
Oracle Business Intelligence Server
Oracle Business Intelligence Administration Tool
Oracle Business Intelligence Cluster Controller
Oracle Business Intelligence Scheduler
Oracle Business Intelligence Client
Oracle Business Intelligence Presentation Services
Oracle Business Intelligence Presentation Services Plug-in and BI Office
Oracle Business Intelligence Catalog Manager
Oracle Business Intelligence Job Manager
Oracle Business Intelligence Publisher
and, there is no Answers ????

How to Install Oracle 10g in Windows 7 Home premium 64bit operating system

Hi,
I am using Windows 7 Home premium 64bit operating system. While i was installing oracle 10g i got error and not able to install. How to install the Oracle 10g databse on this operating system. Is there any patch to install this or i have to use other version of oracle with window 7 operating system?
Thanks in advance
Mayank Adhikari

The argument would be who wants to install Oracle database on Windows 7. I think most probably by the developers who wants to "Try" something prior deal with a production database, right?
For a developer, installing database using the hack is more than NOT having a local database running from the local system. I installed all the products mentioned with windows7bugs post and used the following tools to successfully connect and retrive data from the database instances.
Toad 9.7.x.x
SQL Developer
SQL/Plus
Developer 6i (Another hack, please check this link http://windows7bugs.wordpress.com/2010/03/01/installing-oracle-developer-forms-reports-6i-on-windows-7-64bit/).
I think the discussion about whether all the features of client/server are still available with such a hacked installation is meaningless as far the information requested was strictly for Windows 7, not for a Server OS.
regards,

How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
I need to use my Adobe programs, rescue my email, i-tunes and iphoto data. The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash. There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine. Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

No, the disk was backed up with time machine a few hours prior to the crash. I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up) was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available. And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive. I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed. But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive.
I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder). And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash. That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up. Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive. So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
Thanks for any help. Peggy
Message was edited by: peggy toole

Install Oracle 11.2 (ASM) failover on Red Hat Enterprise Linux Suite

Hi everybody,
I need installer Oracle 11.2 with asm on Failover Cluster Red Hat linux Suite (two servers), could someone help me?
There is documentation about that...
My idea is
- Installer oracle in both servers
- Installer Infraestructure Grid for asm in both server
- Create database on asm (ams disk shoud be same for boths servers)
Is soported gfs (global file system) and asm?
I have many doubts.
Thanks in advance.

I have several comments:
Don't use the RPM utility to install software. It does not resolve dependencies. As of RHEL 5, YUM or UP2DATE are the standard software management tools.
RHEL? Do you have a paid subscription or money to waste? If not, you will be much better off using Oracle Linux, because you can download it for free and also have access to all errata and patches for free (http://public-yum.oracle.com). If you need the RHCK kernel instead of the more advanced Oracle UEK kernel, which is optimized by Oracle for Oracle products, no problem, because Oracle Linux ships with both. If you want to use Linux ASMLib under RHEL 6, you need a RHEL subscription to download the kernel module. The Oracle UEK kernel includes the driver.
Also if you use Oracle Linux, you can install the oracle-rdbms-server-11gr2-preinstall package, which triggers the installation of all prerequisite software and takes care of kernel parameters and creating the Oracle account. You then simply set a password for the Oracle account and you're done.
RHEL 6.0. Why such an old version and not 6.4?
According to my records, you can use the following command under RHEL 6 to install the 11gR2 prerequisite software. Yum will automatically install other depended software as required.
yum install compat-libstdc++-33 compat-gcc-34 compat-gcc-34-c++ \
elfutils-libelf-devel ksh sysstat make gcc gcc-c++ compat-libcap1 \
glibc-devel glibc-common glibc-headers libstdc++-devel libaio-devel

Help! Errors in installing Oracle 8.0.5 for Linux on RedHat

Hi, everyone:
Oracle free installation support group points me here. They
said: "Unfortunately, the trial release of Oracle8 for Linux is
not supported by this group. You can obtain peer support on the
Oracle8 for Linux trialproduct from the discussion group on the
Oracle Technology Network (OTN)(http://technet.oracle.com). "
Thanks in advacnce.
=================================================================
===
SAVED PROBLEM REPORT:
=================================================================
===
Thu Apr 8 20:28:10 EDT 1999 Platform: unixRelease:
8.0.5Product: rdbms_common
Version: 8.0.5.0.0Area: (Installation) Install
information:
Installer Version: 4.0.3.0.0 Installer Script: [
rdbms_common.ins 907 ]
Install Action: Complete Software/Database Fresh
Install
Stage Home /mnt/cdrom Oracle_Base
/u01/app/oracle (true)
Oracle Home /u01/app/oracle/product/8.0.5
Owner oracle
Log
/u01/app/oracle/product/8.0.5/orainst/install.log
During installation of the above product the error below
is encountered:
Error during action 'Creating ntcontab.o'.Command: make -f
/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
ntcontab.o
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\ rm -f
/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
/u01/app/oracle/product/8.0.5/bin/gennttab:
/u01/app/oracle/product/8.0.5/bin/get_platform: No such file
ordirectory
ntcontab.c:7: sys/types.h: No such file or directory
mv: ntcontab.o: No such file or directorymake: *** [ntcontab.o]
Error 1
=================================================================
===
=================================================================
===
SAVED PROBLEM REPORT:
=================================================================
===
Thu Apr 8 20:29:19 EDT 1999 Platform: unixRelease:
8.0.5Product: rdbms_common
Version: 8.0.5.0.0Area: (Installation) Install
information:
Installer Version: 4.0.3.0.0 Installer Script: [
rdbms_common.ins 907 ]
Install Action: Complete Software/Database Fresh
Install
Stage Home /mnt/cdrom Oracle_Base
/u01/app/oracle (true)
Oracle Home /u01/app/oracle/product/8.0.5
Owner oracle
Log
/u01/app/oracle/product/8.0.5/orainst/install.log
During installation of the above product the error below
is encountered:
Error during action 'Creating ntcontab.o'.Command: make -f
/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
ntcontab.o
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\ rm -f
/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
/u01/app/oracle/product/8.0.5/bin/gennttab:
/u01/app/oracle/product/8.0.5/bin/get_platform: No such file
ordirectory
ntcontab.c:7: sys/types.h: No such file or directory
mv: ntcontab.o: No such file or directorymake: *** [ntcontab.o]
Error 1
=================================================================
===
LINUX ENVIRONMENTAL VIABLES DUMPED===========================
Machine Environment:--------------------
User: uid=502(oracle) gid=502(dba) groups=502(dba)
Current Directory: /mnt/cdrom/orainstMachine: {
Linux localhost.localdomain 2.0.36 #1 Tue Oct 13
22:17:11 EDT 1998i586 unknown
[From uname -a] localhost.localdomain [From
hostname]}Ulimit: {
core file size (blocks) 1000000 data seg size
(kbytes) unlimited
file size (blocks) unlimited max memory size
(kbytes) unlimited
stack size (kbytes) 8192 cpu time (seconds)
unlimited
max user processes 256 pipe size (512 bytes)
8
open files 256 virtual memory (kbytes)
2105343}Swap: {
procs memory swap io
system cpu
r b w swpd free buff cache si so bi bo in
cs us sy id
0 0 0 40 9168 14632 56620 0 0 22 16 171
64 4 2 94
[From vmstat]}Disk Mounts: { /dev/hda10 on / type
ext2 (rw)
none on /proc type proc (rw) /dev/hda8 on /boot type
ext2 (rw)
/dev/hdc on /mnt/cdrom type iso9660 (ro) [From
mount]}Disk Free: {
Filesystem 1024-blocks Used Available Capacity
Mounted on
/dev/hda10 1112004 253147 801403 24% /
/dev/hda8 21927 596 20199 3%
/boot
/dev/hdc 397472 397472 0 100%
/mnt/cdrom [From df -k]
}Environment: { HISTFILESIZE=1000 HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=localhost.localdomain HOSTTYPE=i386
LD_LIBRARY_PATH=/u01/app/oracle/product/8.0.5/lib
LOGNAME=oracle
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/8.0.5
ORACLE_SID=ORC1 ORACLE_TERM=386x
ORA_NLS33=US7ASCII OSTYPE=Linux
PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/app/oracle/
product/8.0.5/bin:/bin:/usr/bin:/usr/local/bin
SHELL=/bin/sh SHLVL=2 TERM=linux TMPDIR=/var/tmp
USER=oracle _=/usr/bin/env}
System Tables: {}Semaphores: { ------ Shared Memory
Segments --------
key shmid owner perms bytes
nattch status
------ Semaphore Arrays --------
key semid owner perms nsems
status
------ Message Queues --------
key msqid owner perms used-bytes
messages
[From ipcs -sa] }Shared Mem: { ------ Shared
Memory Segments --------
key shmid owner perms bytes
nattch status
------ Semaphore Arrays --------
key semid owner perms nsems
status
------ Message Queues --------
key msqid owner perms used-bytes
messages
[From ipcs -ma] }/etc/oratab: {}Tracing: { } :
null

John -
You are missing some required Linux files. When you install
Linux, pick the 'everything' option, then weed out the obvious
things you don't want (like the Serbian How-To's, etc.)
I say this because I ran into the exact same thing this past
weekend after picking and choosing which packages to install for
Linux. After re-installing with the 'everything' option, the
Oracle install went swimmingly. I wish I could tell you which
package in particular you are missing, but I never figured that
out.
carl
John (guest) wrote:
: Hi, everyone:
: Oracle free installation support group points me here.
They
: said: "Unfortunately, the trial release of Oracle8 for Linux
is
: not supported by this group. You can obtain peer support on
the
: Oracle8 for Linux trialproduct from the discussion group on
the
: Oracle Technology Network (OTN)(http://technet.oracle.com). "
: Thanks in advacnce.
=================================================================
: ===
: SAVED PROBLEM REPORT:
=================================================================
: ===
: Thu Apr 8 20:28:10 EDT 1999 Platform: unixRelease:
: 8.0.5Product: rdbms_common
: Version: 8.0.5.0.0Area: (Installation) Install
: information:
: Installer Version: 4.0.3.0.0 Installer Script: [
: rdbms_common.ins 907 ]
: Install Action: Complete Software/Database Fresh
: Install
: Stage Home /mnt/cdrom Oracle_Base
: /u01/app/oracle (true)
: Oracle Home /u01/app/oracle/product/8.0.5
: Owner oracle
: Log
: /u01/app/oracle/product/8.0.5/orainst/install.log
: During installation of the above product the error below
: is encountered:
: Error during action 'Creating ntcontab.o'.Command: make -f
: /u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: ntcontab.o
: (if [ "compile" = "compile" ] ; then \
: /u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
: cc -c ntcontab.c ;\ rm -f
: /u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
: /u01/app/oracle/product/8.0.5/bin/gennttab:
: /u01/app/oracle/product/8.0.5/bin/get_platform: No such file
: ordirectory
: ntcontab.c:7: sys/types.h: No such file or directory
: mv: ntcontab.o: No such file or directorymake: ***
[ntcontab.o]
: Error 1
=================================================================
: ===
=================================================================
: ===
: SAVED PROBLEM REPORT:
=================================================================
: ===
: Thu Apr 8 20:29:19 EDT 1999 Platform: unixRelease:
: 8.0.5Product: rdbms_common
: Version: 8.0.5.0.0Area: (Installation) Install
: information:
: Installer Version: 4.0.3.0.0 Installer Script: [
: rdbms_common.ins 907 ]
: Install Action: Complete Software/Database Fresh
: Install
: Stage Home /mnt/cdrom Oracle_Base
: /u01/app/oracle (true)
: Oracle Home /u01/app/oracle/product/8.0.5
: Owner oracle
: Log
: /u01/app/oracle/product/8.0.5/orainst/install.log
: During installation of the above product the error below
: is encountered:
: Error during action 'Creating ntcontab.o'.Command: make -f
: /u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: ntcontab.o
: (if [ "compile" = "compile" ] ; then \
: /u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
: cc -c ntcontab.c ;\ rm -f
: /u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
: /u01/app/oracle/product/8.0.5/bin/gennttab:
: /u01/app/oracle/product/8.0.5/bin/get_platform: No such file
: ordirectory
: ntcontab.c:7: sys/types.h: No such file or directory
: mv: ntcontab.o: No such file or directorymake: ***
[ntcontab.o]
: Error 1
=================================================================
: ===
: LINUX ENVIRONMENTAL VIABLES DUMPED===========================
: Machine Environment:--------------------
: User: uid=502(oracle) gid=502(dba) groups=502(dba)
: Current Directory: /mnt/cdrom/orainstMachine: {
: Linux localhost.localdomain 2.0.36 #1 Tue Oct 13
: 22:17:11 EDT 1998i586 unknown
: [From uname -a] localhost.localdomain [From
: hostname]}Ulimit: {
: core file size (blocks) 1000000 data seg size
: (kbytes) unlimited
: file size (blocks) unlimited max memory size
: (kbytes) unlimited
: stack size (kbytes) 8192 cpu time (seconds)
: unlimited
: max user processes 256 pipe size (512 bytes)
: 8
: open files 256 virtual memory (kbytes)
: 2105343}Swap: {
: procs memory swap io
: system cpu
: r b w swpd free buff cache si so bi bo in
: cs us sy id
: 0 0 0 40 9168 14632 56620 0 0 22 16 171
: 64 4 2 94
: [From vmstat]}Disk Mounts: { /dev/hda10 on / type
: ext2 (rw)
: none on /proc type proc (rw) /dev/hda8 on /boot type
: ext2 (rw)
: /dev/hdc on /mnt/cdrom type iso9660 (ro) [From
: mount]}Disk Free: {
: Filesystem 1024-blocks Used Available Capacity
: Mounted on
: /dev/hda10 1112004 253147 801403 24% /
: /dev/hda8 21927 596 20199 3%
: /boot
: /dev/hdc 397472 397472 0 100%
: /mnt/cdrom [From df -k]
: }Environment: { HISTFILESIZE=1000 HISTSIZE=1000
: HOME=/home/oracle
: HOSTNAME=localhost.localdomain HOSTTYPE=i386
: LD_LIBRARY_PATH=/u01/app/oracle/product/8.0.5/lib
: LOGNAME=oracle
: MAIL=/var/spool/mail/oracle
: ORACLE_BASE=/u01/app/oracle
: ORACLE_HOME=/u01/app/oracle/product/8.0.5
: ORACLE_SID=ORC1 ORACLE_TERM=386x
: ORA_NLS33=US7ASCII OSTYPE=Linux
PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/app/oracle/
: product/8.0.5/bin:/bin:/usr/bin:/usr/local/bin
: SHELL=/bin/sh SHLVL=2 TERM=linux TMPDIR=/var/tmp
: USER=oracle _=/usr/bin/env}
: System Tables: {}Semaphores: { ------ Shared
Memory
: Segments --------
: key shmid owner perms bytes
: nattch status
: ------ Semaphore Arrays --------
: key semid owner perms nsems
: status
: ------ Message Queues --------
: key msqid owner perms used-bytes
: messages
: [From ipcs -sa] }Shared Mem: { ------ Shared
: Memory Segments --------
: key shmid owner perms bytes
: nattch status
: ------ Semaphore Arrays --------
: key semid owner perms nsems
: status
: ------ Message Queues --------
: key msqid owner perms used-bytes
: messages
: [From ipcs -ma] }/etc/oratab: {}Tracing: { } :
null

Install oracle goldengate at ASM for data replication in RAC system?

Similar Messages

Maybe you are looking for