Install Oracle Linux + 11G Rac (itanium) HELP

Hello, sorry for the English ...
I have 2 hp server rx2620 itanium, mas1000 and should do tests to install oracle 11g rac linux oracle, but on linux I can not, someone can give me some advice or guide on the internet? my question is how to share the disk, so that the 2 servers are able to see them, I use ASMLib?
2 hp Server rx2620 itanium (4 NICs + 2 fiber channel cards)
MSA1000 (2 100gb disks to be shared) Fibre Channel
Oracle Linux 5.5 IA64
Oracle 11g Grid
Oracle Database 11g
Sorry and thanks.

There does not seen to be much current development in this area. Oracle Linux 5.5 is apparently the last version available. I would ask Oracle support about current and future plans to support the IA64 bit platform. Perhaps you might rather want to use HP Unix instead of Linux. Apparently Red Hat is no longer going to support the IA64 platform according to http://www.theregister.co.uk/2009/12/18/redhat_rhel6_itanium_dead. Oracle Stops All Software Development For Intel Itanium Microprocessor (March 2011) http://www.oracle.com/us/corporate/press/346696
I think this might actually be another example of a silly development in the IT industry, where customers prefer cheaper, often more trivial solutions, over more expensive superior solutions. The majority of customers is apparently buying into the the Intel x86-64 architecture to support x86 CISC based software like MS windows, thinking a x86-64 CPU is just as powerful as a IA 64-bit CPU.
Regrading your question to share the disks, you need hardware that supports device sharing and a cluster file system. There are several options for hardware, typically fiber-channel, iSCSI and the older differential (HVD) SCSI for SAN and even NFS can apparently be used with a certified NAS storage. MSA1000 should be fine. Oracle provides OCFS2 cluster filesystem and you can also use ASM. You don't necessarily need ASMLib, but need to setup multipath or udev. How to setup the MSA1000 for shared storage should be in the Storage controller manual.

Similar Messages

Install Oracle 10g R2 RAC on Linux 5.x (64 bit)

Hi Friends,
Please provide the document to Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Cluster : Local Disk
OCR and Voting Disk : OCFS2
DB Home : Local
DBF Files and FRA : ASM
Please let me know how to create OCFS2 and ASM Volumes for RAW Disks (SAN Lun's)
Regards,
DB

You can refer below
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
http://www.oracledba.org/10gR2/Pre_Install_10gR2.html
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=9&ved=0CHUQFjAI&url=http%3A%2F%2Fcommunities.vmware.com%2Fservlet%2FJiveServlet%2FdownloadBody%2F12534-102-1-13254%2F10gR2%2520RAC%2520INSTALLATION%2520IN%2520LUNX5.pdf&ei=71A5T-jrM8jMiQLihOS_Cg&usg=AFQjCNGnBrzhvm3j9PuPNy4FLJuaxetS1A&sig2=0b8VnMefcXueFUu44-66yQ
Hope this helps,
Regards
http://www.oracleracexpert.com

Installing Oracle Linux 6 For 11g

I'm downloading Oracle Linux 6,2 64-bit with the single intention to simply install Oracle Database 11g Enterprise Edition and I've never used or installed Oracle Linux before. I know that in order to install Oracle 11g database, I will need to have some kind of graphic utility like X but I do not need a Desktop Environment like Gnome or KDE (which is not permitted on servers per company policy). Can someone tell me what exactly or which specific options I will need to minimally install Oracle database 11g? I don't want to install the entire DVD content to my server but rather know what packages are required and ONLY install those. I don't know if the Linux installer has a fairly self explanatory / easy to use options based on me using this system as a database server but if anyone can please help, I'd greatly appreciate it!

Sorry everyone but I've retured back from vacation to focus back on getting Oracle Database 11.2.0.3 installed on Oracle Linux 6.2 64-bit. I've got the O.S. up and I thought I selected all the correct / required packages to perform the standard installation using the Universal Installer but it's not working for some reason. I'm unable to forward my 'xclock' session from the database server host to my workstation (Ubuntu 12.04 Linux). When I open a terminal window on my Ubuntu Linux machine and type 'xclock', the application opens w/o any issues. When I SSH into my Oracle database server and attempt to forward the X11 session over to my machine, I get:
carlos@ghost:~$ ssh -x carlos@oracledb
carlos@oracledb's password:
[carlos@oracledb ~]$ xclock
Error: Can't open display:
[carlos@oracledb ~]$ logout
Connection to oracledb closed.I obviously have the application 'xclock' and all required dependencies installed but for some reason it doesn't forward from my Oracle server to my workstation so that I can start the installation...
Below is a list of all installed packages on Oracle Linux that have 'xorg-x11*' in their package header name:
[root@oracledb ~]# rpm -qa | grep -i "xorg-x11*"
xorg-x11-drv-qxl-0.0.14-13.el6_2.x86_64
xorg-x11-drv-v4l-0.2.0-4.0.1.el6.x86_64
xorg-x11-drv-savage-2.3.2-1.0.1.el6.x86_64
xorg-x11-drv-i740-1.3.2-2.0.1.el6.x86_64
xorg-x11-drv-sisusb-0.9.4-1.0.1.el6.x86_64
xorg-x11-drv-acecad-1.5.0-3.0.1.el6.x86_64
xorg-x11-xkb-utils-7.4-6.el6.x86_64
xorg-x11-apps-7.4-10.el6.x86_64
xorg-x11-drv-openchrome-0.2.904-4.el6.x86_64
xorg-x11-drv-penmount-1.5.0-2.el6.x86_64
xorg-x11-drv-nouveau-0.0.16-13.20110719gitde9d1ba.el6.x86_64
xorg-x11-drv-ati-6.14.2-7.el6.x86_64
xorg-x11-drv-mouse-1.7.0-4.el6.x86_64
xorg-x11-drv-fpit-1.4.0-2.el6.x86_64
xorg-x11-drivers-7.3-13.3.el6.x86_64
xorg-x11-xinit-1.0.9-13.el6.x86_64
xorg-x11-server-utils-7.5-5.2.el6.x86_64
xorg-x11-xauth-1.0.2-7.1.el6.x86_64
xorg-x11-utils-7.4-8.el6.x86_64
xorg-x11-drv-ati-firmware-6.14.2-7.el6.noarch
xorg-x11-server-common-1.10.4-6.el6_2.3.x86_64
xorg-x11-server-Xorg-1.10.4-6.el6_2.3.x86_64
xorg-x11-drv-r128-6.8.1-3.0.1.el6.x86_64
xorg-x11-drv-vmware-11.0.3-1.0.1.el6.x86_64
xorg-x11-drv-i128-1.3.4-1.0.1.el6.x86_64
xorg-x11-drv-trident-1.3.4-1.0.1.el6.x86_64
xorg-x11-drv-glint-1.2.5-1.0.1.el6.x86_64
xorg-x11-drv-apm-1.2.3-2.0.1.el6.x86_64
xorg-x11-drv-ast-0.91.10-1.0.1.el6.x86_64
xorg-x11-drv-siliconmotion-1.7.5-1.0.1.el6.x86_64
xorg-x11-drv-dummy-0.3.4-1.0.1.el6.x86_64
xorg-x11-drv-wacom-0.10.5-14.0.1.el6.x86_64
xorg-x11-drv-sis-0.10.3-1.0.1.el6.x86_64
xorg-x11-drv-evdev-2.6.0-2.el6.x86_64
xorg-x11-drv-synaptics-1.4.1-3.el6.x86_64
xorg-x11-drv-intel-2.16.0-1.el6.x86_64
xorg-x11-drv-mga-1.4.13-3.el6.x86_64
xorg-x11-drv-cirrus-1.3.2-2.el6.x86_64
xorg-x11-drv-mutouch-1.3.0-2.el6.x86_64
xorg-x11-drv-hyperpen-1.4.1-2.el6.x86_64
xorg-x11-drv-fbdev-0.4.2-2.el6.x86_64
xorg-x11-drv-vmmouse-12.7.0-1.el6.x86_64
xorg-x11-drv-keyboard-1.6.0-1.el6.x86_64
xorg-x11-drv-vesa-2.3.0-2.0.1.el6.x86_64
xorg-x11-drv-tdfx-1.4.3-2.0.1.el6.x86_64
xorg-x11-drv-rendition-4.2.4-1.0.1.el6.x86_64
xorg-x11-drv-mach64-6.9.0-1.0.1.el6.x86_64
xorg-x11-drv-voodoo-1.2.4-1.0.1.el6.x86_64
xorg-x11-drv-s3virge-1.10.4-2.0.1.el6.x86_64
xorg-x11-drv-xgi-1.6.0-11.0.1.el6.x86_64
xorg-x11-font-utils-7.2-11.el6.x86_64
xorg-x11-drv-void-1.4.0-1.el6.x86_64
xorg-x11-drv-aiptek-1.4.1-2.el6.x86_64
xorg-x11-drv-nv-2.1.18-2.el6.x86_64
xorg-x11-drv-elographics-1.3.0-2.el6.x86_64

Is it possible to Install Oracle Linux 6.2 64-bit in Itanium Server?

Hi Gurus,
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.
Regards
Hasan Al Mamun
Systems Analyst
Bangladesh Bank
Dhaka, Bangladesh.

HasanAlMamun wrote:
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.It's not possible. We do not provide Oracle Linux 6 for Itanium.

Install Oracle Database 11g release 2 on Oracle Linux 6.0?

I'm running Oracle Linux Server 6.0, and am trying to install Oracle Database 11g release 2 on it. The installation is failing because it says I need "glibc-2.3.4-2.41", but I think the OS came with glibc 2.12.
How do I upgrade glibc on this machine to glibc-2.3.4-2.41?

898649 wrote:
Thanks. What's UEK?UEK = Unbreakable Enterprise Kernel. It is installed by default with Oracle Linux 5 Update 7. Also, if you install the oracle-validated RPM (as part of the initial install or via yum afterwards), all the pre-requisites for installing database will be taken care of for you.

Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
i went through the pre-requisites ok before beginning with the installation.
since RHEL 5.3 doesnt support raw devices i used
http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
udev to configure shared storage. my storage is on openfiler as a iSCSI target.
fdisk -l on both nodes shows the shared drives.
[root@node1 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          13      104391   83 Linux
/dev/sda2              14        2053    16386300   8e Linux LVM
/dev/sda3            2054        2372     2562367+ 82 Linux swap / Solaris
Disk /dev/sdd: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdd1               1       10016    10256368   83 Linux
Disk /dev/sdb: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1       10048    10289136   83 Linux
Disk /dev/sdc: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdc1               1       10048    10289136   83 Linux
Disk /dev/sdf: 10.5 GB, 10569646080 bytes
64 heads, 32 sectors/track, 10080 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdf1               1       10080    10321904   83 Linux
Disk /dev/sde: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sde1               1       10016    10256368   83 Linux
[root@node1 ~]# ls -l /dev/iscsi/arpl*
/dev/iscsi/arpl1:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sde
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
/dev/iscsi/arpl2:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdd
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
/dev/iscsi/arpl3:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdb
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
/dev/iscsi/arpl4:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdc
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
/dev/iscsi/arpl5:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdf
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
[root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
still when i enter the name of the raw device which i have created i get the following error. please help
Image: !http://img91.imageshack.us/img91/7448/oracle.png!

did you check this
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
also before you do what is suggested on the url posted by Mufalani,
it seems that you should do the following:
Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
# ls /etc/udev/rules.d/60-raw.rules
/etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
# touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
# cat /etc/udev/rules.d/61-oracleraw.rules
# Raw bind to Oracle Clusterware devices
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
#!/bin/bash
grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
if [ -z "$minor" ]; then
echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
else
echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
fi
done

Problem installing Oracle Linux Release 5 Update 2 from Oracle e-Delivery

Hello
I have been trying to install Oracle Linux Release 5 Update 2 from Oracle e-Delivery so that I can install Oracle 11g express edition beta.
Here are the steps that I took and the problem that I am having:
1. I downloaded the file, unzipped the file twice, which gave me 3,042 files and 13 folders with the total size = 3.07 GB.
2. I put in the DVD and restarted my PC hoping that my PC will boot from the DVD, but instead Window started.
I reported this issue to tech support from e-Delivery, but they referred me to contact you. Please assist.
Julia

3,042 files and 13 folders with the total size = 3.07 GBWhich download .zip did you choose from edelivery? Under linux-x64 I peeked "Oracle Linux Release 5 Update 2 for x86_64 (64 Bit) - DVD" file V15099-01.zip downloaded, it has just the one .iso file. You'll need to burn that to DVD, but with burn s/w that handles ISO files.
Also keep in mind you'll need 64 bit hardware (amd/intel 64? itanium? those are different), the only *nix platform I've got handy to try it out is -x86 :(

How to install oracle database 11g express edition on Windows 7

Hi Guys,
i am trying to download and install Oracle database 11g express edition on windows7 and i can't seem to get it right. i did get the download but when i try to install, it keeps saying it appears to be an invalid archive.
Please help..

Action - Refer to the logs or contact OracleFinding the problem is the key. "Refer to the logs" is the only option, XE has no oracle support offerings.
Which plugin failed, and why did it fail will be important clues. There should be error messages in the log that will be helpful.
Otherwise, we don't have much help to offer. Fixing a problem means identifying the problem and performing steps to correct it, if there a fix is available.
A MOS lookup on the ins-20802 error has snippets from one installer session, this one is from an x64 install. Not x86. To paraphrase the details:
... Created a new file <drive>:<OH path>\cfgtoollogs\configToolAllCommands
SEVERE: java.io.IOException: Access is denied
...So from those symptoms, the user trying to run the installer does not have appropriate rights on that drive and/or folder. The fix for that particular problem is adding the user to the local administrators group. And rerunning the install. After running the deinstall steps to clean up the installation. As specified in the XE install guide for Windows.
http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Also note the System Requirements, it specifies a System architecture Intel x86, which is not X64. There is no X64 installer for XE on Windows. So it might work. Or it might not if your host is x64.
So if that is your particular error, verify that your user is in the local admins group. Either use the local users and groups applet (Start/Run/lusrmgr.msc) and open up the Administrators group. Click the Add button. Find your user. If your OS user is a windows domain user, be sure you have authenticated to the domain.
Try the `net ...` list of the adminis group, that should reveal whom is indeed in the local administrators group:
net localgroup administrators
Administrator
<domain>\Domain Admins ... # ??? is the host in windows domain ???
<domain>\Local Admins
<domain>\<user1>
<user2>
<user3>
echo %USERNAME%
# if relevant:
echo %USERDOMAIN%Like it also states in the Windows install guide, under Permission Required quote:
... must be a member of the Administrators group on Windows to install Oracle Database XE.

Installing Oracle Linux 5.8 on Virtual Box

I'm trying to install Oracle Linux 5.8 on Virtual Box. I have downloaded V31120-01 and burned to the DVD, I think successfully.
However, when I start the Virtual machine, I get the Opening screen, "Oracle Linux" the little picture of the penguin guy, etc, so I think my DVD is good.
The screen says, "To install or upgrade in graphical mode, press the <enter> key." So I do.
Several lines of text flow across the screen, but then the process seems to stop with no prompt on what to do next or any indication that an error has occurred, it just stops.
The last lines I can see are:
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 5 devices
usbcore: registered new driver usbfs
usbcore: registerd new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try 'pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPS0v4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMC northbridge found.
NET: Registered protocol family 2
I'm not sure if it's waiting for some input from me, or if there is a problem, but nothing happens beyond this point until I power down the virtual machine.

There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
Note: This is not a Virtualbox forum.

Hyperion errors after installing Oracle Database 11G

Hello,
The company I work for has a bunch of Oracle databases available, two which I connect to (use to connect to). I have multiple applications that I use to connect to these databases, Hyperion Interactive Reporting Studio 9.3.1 being one of them. I'm using Windows XP as my client.
I made the mistake of installing Oracle Database 11G Express Edition and now I cannot connect to any of the database using my applications, but I can connect to the same databases using SQL Developer. When I try connectiing using Hyperion, I get "SQL NATIVE ERROR [12504] SQL MESSAGE [[INTERSOLV][ODBC ORACLE 8 DRIVER][ORACLE 8][ORA-12504; TNS LISTERNER WAS NOT GIVEN THE SERVICE_NAME IN CONNECT DATA".
When connectiing using other company applications, which use the same database, i get "IM006: [INTERSOLV][ODBC ORACLE 8 DRIVER] DRIVERS SQLSETCONNECTATTRFAILED. UNABLE TO CONNECT TO DATABASE. CHECK USER NAME AND PASSWORD AND TRY AGAIN"
I'm assuming that I updated a driver or registry setting and I need to know how to reverse . I also copied a tnsnames and listerner from an associates computer and placed it in the same location on my computer, but this has not helped at all, even after rebooting the computer.
I even double checked and logged onto anothe computer and I can connect to the database using these same applications, so I definetly messed something up locally on my computer.
Any help is appreciated. Joe.

Probably you could solve odbc driver issues by removing the PATH entry from XE installation.
It looks something like:
Path=C:\oracle\oraclexe\app\oracle\product\11.2.0\server\bin;<remaining paths>
In system variabels settings, edit PATH to remove the "oraclexe" path and semicolon, leaving only <remaining paths>.
However, removing it will likely have an affect on XE usage. But that may be preferred over other apps working.
Edited by: orafad on Oct 12, 2011 2:55 PM

Can't Install Oracle BI 11g

Hi Friends,
I need you to help me to fix this problem out, the problem is about the network while I tried to install Oracle BI 11g. (This is emergency)
Problem:
in step 5 of 15, the application ask you to input the Password for Weblogic , but after i fill the those two boxs. And then i press next
after that : i got this message " INST-08058: A lookup of the address for this machine return an IP address rather than a hostman ".
Note: I am on:
Window Server 2003 ,
Oracle 11r2 ,
already created the shcema of DEV_MDS and DEV_BIPLATFORM ,
already install weblogic 12R.
How can i fix the problem above ? I am looking forward from all of you.
Thank,
Dorang

Hi,
Refer My Oracle Support Note:
OBIEE 11G: Unable to pass Installation Screen requesting Administrator User name and Password [ID 1265295.1]
Change the host file to contain the local IP address.
IP_address hostname.domainname hostname
i.e:
Replace IP_address with the local IP address of the loopback adapter.
also check below link
OBIEE 11g installation issue
Thanks
Deva

How could I install Oracle Linux 6.3.

When I am going to install oracle Linux 6.3 in my machine after selecting the installation option(i.e "Install or Upgrading the existing system" or "Install system with basic video driver") nothing is appearing except a blank screen. Please help.
My machine config is as bellow.
Mother Board : Asus P5Q Pro
Processor : Core2Duo 2.8GHz
RAM : 6GB
Video Card : Nvdia GForce 9 series

Nvdia GForce 9 series is not a server type video card. Oracle Linux and other RHEL derivatives are designed for server hardware. You might want to keep this in mind because there may be additional problems. Your mileage will vary.
Regarding your problem, it sounds like you are experiencing a typical compatibility or support problem with your video card DRM. A common way around this problem is to disable support for Kernel Mode Setting (KMS). You can test this by setting the nomodeset Linux kernel parameter by pressing any key at the very system startup to enter the grub bootloader menu.

Install Oracle BI 11g 11.1.1.5.0 Configuring OCM failed

Hi all,
I'm installing Oracle BI 11g on Window7 32 bit.
It's almost done. But I have an error at Configuration Progess / Configuring OCM failed. The message is: "Error encountered in deploying OCM instance. Exit code =1"
I check the install Log:
[2012-12-27T13:36:37.349+07:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] Checking for $ORACLE_HOME/ocm.rsp file existence
[2012-12-27T13:36:37.349+07:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] $ORACLE_HOME/ocm.rsp exists
[2012-12-27T13:36:37.349+07:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] Install handler params :-componentName ocm1 -componentType OCM -cfgHome C:\OracleBI11g\instances\instance1 -rspFilePath C:\OracleBI11g\Oracle_BI1\ocm.rsp -oracleInstance C:\OracleBI11g\instances\instance1
[2012-12-27T13:36:37.349+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: C:\OracleBI11g\instances\instance1\auditlogs
[2012-12-27T13:36:37.349+07:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE
[2012-12-27T13:36:37.379+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: connect] Creating connection to weblogic.management.mbeanservers.runtime
[2012-12-27T13:36:37.379+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: getAttribute] Getting RegisterMBean attribute: RegisteredInstanceNames
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: disconnect] Breaking connection to mbean server
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: connect] Creating connection to weblogic.management.mbeanservers.runtime
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: invokeMBean] Invoking RegisterMBean operation: getRegisteredComponentNames
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: disconnect] Breaking connection to mbean server
[2012-12-27T13:36:37.389+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponent] Creating empty component directories...
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: createComponentDirs] ENTRY
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Confirming Oracle Instance exists: C:\OracleBI11g\instances\instance1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Creating empty component directory: C:\OracleBI11g\instances\instance1\OCM\ocm1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Creating empty component config directory: C:\OracleBI11g\instances\instance1\config\OCM\ocm1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Creating empty component log directory: C:\OracleBI11g\instances\instance1\diagnostics\logs\OCM\ocm1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: createComponentDirs] RETURN
[2012-12-27T13:36:37.389+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponent] Provisioning OCM files for ocm1
[2012-12-27T13:36:37.399+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.PortTracker] [SRC_METHOD: removePorts] Port tracker removing ports for component:
[2012-12-27T13:36:37.399+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] ENTRY
[2012-12-27T13:36:37.399+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] Creating OCM instance directories in ORACLE_INSTANCE
[2012-12-27T13:36:37.399+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] Deploying the OCM packages.
[2012-12-27T13:36:37.399+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] running cmd /c C:\OracleBI11g\Oracle_BI1\ccr\bin\setupCCR.exe -S OUI -V 10.3.0.3.0 -c -R C:\OracleBI11g\Oracle_BI1\ocm.rsp
[2012-12-27T13:36:39.621+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 27] [ecid: 0000JjR4vD52ZNYzLouHOA1GqxDq00000I,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl$StreamBleeder] [SRC_METHOD: run] *Error : C:\PROGRA~1\Java\JDK17~1.0_0\bin does not contain java.[[*
JAVA_HOME does not contain a valid JDK/JRE.
Redefine JAVA_HOME to refer to a JDK/JRE 1.3.0 or greater.
when I check the System variables:
JAVA_HOME = C:\Program Files\Java\jdk1.7.0_05\bin\
Maybe I have problem in JDK version?
Can you plz help me fix?
Thank you

OBIEE 11g is not certified with windows 7 32bit. Please see the certification matrix: http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.html

ERROR INSTALLING ORACLE ENTERPRISE 11G in RHEL 63

Dear All:
I am installing Oracle Enterprise 11g in RHEL 6.3, but I got some errors due to components of Red Hat in the section : "PRE_REQUISITE CHECK"
The versions of componentes of RHEL are newer than version required by Enterprise 11g.
package: libaio-0.3.105 Failed
package: compaq-libstdc++-33-3.2.3 Failed
package: libaio-devel-0.3.105 Failed
package: libgcc-3.4.6 Failed
package: libstdc++-3.4.6 Failed
package: unixODBC-2.2.11 Failed
package: unixODBC-devel-2.2.11 Failed
package: pdksh-5.2.14 Failed
I need your help to define what to do? I should omit them? or correct them? how to correct?

Hi,
Kindly find the prerequisite packages in the following note
Requirements for Installing Oracle 11gR2 RDBMS on RHEL6 or OL6 64-bit (x86-64) (Doc ID 1441282.1)
If you have newer than defined prerequisites, you can ignore these warnings and continue installation
Thanks,
Krishna

Install oracle db 11g r2 on Windows 7 Error

Hi,
i install oracle db 11g r2 on windows 7 ultmate and founded error :
file not found orandce11.dll.dbl
and
file not found orancds11r.dll.dbl
how to solution ?
thanks,
Khun

Coincidentally, I installed the 11.2 client myself this morning and got the same result. In my case, I'm loading to Windows XP Pro. I have no solution, but I can add a bit of detail in case it helps.
I'm installing from a file I downloaded last week. There is only one zip file, so your suggestion doesn't apply Werner. I did a search through the entire directory structure, and these files don't appear at all. Of the two files orandce11 and orancds11r, there is nothing closely resembling the former, but there is the similar file orancds11.dll (same right up to the trailing 'r').
In both cases, I selected to continue with the install. It finished sucessfully and works, but I don't know what these files are for. I did a Google search, and the one and only hit was Khun's post.
Here are the log entries, I included a few of the preceding lines in case the context helps.
INFO: Copying files for 'Oracle Advanced Security 11.2.0.1.0 '
INFO: Copying files for 'Oracle Advanced Security 11.2.0.1.0 '
INFO: 4/19/10 9:46:33 AM EDT: Starting install Install Phase 1 of component Oracle Advanced Security
INFO: Calling Action fileActions10.2.0.6.0 moveFile
     selectedNodes = null
     source = D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl
     destination = D:\oracle\product\11.2.0\client_1\bin\orandce11.dll
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll'
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll'
INFO: Exception thrown from action: moveFile
Exception Name: FileNotFoundException
Exception String: File not found D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl
Exception Severity: 2
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Ignore
INFO: Calling Action fileActions10.2.0.6.0 moveFile
     selectedNodes = null
     source = D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl
     destination = D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll'
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll'
INFO: Exception thrown from action: moveFile
Exception Name: FileNotFoundException
Exception String: File not found D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl
Exception Severity: 2
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Ignore
Thanks,
Roddy

Install Oracle Linux + 11G Rac (itanium) HELP

Similar Messages

Maybe you are looking for