Install Oracle on Solaris

I have Installed Oracle 8 on Solaris Intel with starter Database. Its fine and working, but when I create custome database It reports can not connect to Oracle. I am struck. Please help me out.
Regards,
null

you would need to startup your database in order to connect! Or if you are connecting using sqlplus "/ as sysdba". You would need to be in the unix dba group in order to connect.

Similar Messages

Disk partitioning tool, to install oracle in solaris

I need to install oracle in solaris.Is there any version of solaris for intel processors.
Is there any free disk partioning tool availbale

The partitioning tool (fdisk) you need comes with OpenSolaris 10. First Download this free Operating System from sun.com. Then start the installation. You will be asked to partition your hard disk. The system automatically recognises Windows Installations and Linux Installations on the same disk. Windows Installations will be bootable after the Solaris Installation. Linux and Solaris is not able to use the same disk. Because they have the same boot loader/manager called GRUB and must make a different disk layout for this boot loader. But you can use Linux and Solaris on different disks.
Oracle 10.1 and 10.2 is available for Solaris x64. I strongly recommend to use the 64 Bit AMD64 version. Its a real fun and fast as hell. Supported Raid Controllers can be found at the Solaris driver discussion forum at www.opensolaris.org.

How to Install oracle 11G Solaris 10 NO GUI using command line

Hello
I need to install oracle 11G R2 on Solaris 10 but cant use interactive mode i tried the following
/runInstaller -silent -force -debug FROM_LOCATION="/var/tmp/oracle/database/stageproducts.xml" ORACLE_HOME="/oracle/product"
As per oracle metalink documentation - however i get the following messages
[SEVERE] - My Oracle Support Username/Email Address Not Specified
has anyone installed oracle with no interactive mode how can i do so ?
thank you

Have you followed the needed steps in the Install Guide ? http://download.oracle.com/docs/cd/E11882_01/install.112/e17163/app_nonint.htm#BABFEECI
HTH
Srini

Installing oracle on solaris

Hi all ,
Can anybody please provide me the document for installing oracle database 9i on solaris OS. thanks
Thanks & Regs
RG

Its all documented properly.
http://download.oracle.com/docs/html/A96167_01/toc.htm

Install Oracle on Solaris 10

To install Oracle 10g in a Solaris 10, Do I need to launch a GUI or do I can install it in text mode?

An interactive installation needs the graphical installer. Alternatively you could perform a silent installation using a response file. You find all necessary steps in the installation guide.
Werner

Install Oracle on Solaris Intel

I have purchased Oracle8i Enterprise Edition, Release 2(8.1.6) for Intel Unix(Solaris Intel), and have installed successfully. However, as soon as I shut down and reboot the machine, I can connect to sqlplus
internal, but I cannot log into the database as "sys".
The procedure I did is as following:
Immediately after the installation (message says "installation successful"),
1. Log in as user "oracle" in the Bourne shell.
2. At the $ prompt, type "sqlplus internal"
3. It come out with SQL prompt
4. SQL> show user ( I typed show user under SQL prompt)
5. Then it return "sys"
Things seemed to work fine at that point.
But, when I shut down and reboot the machine and logon again, and follow the same steps 1-5 as above, it did not work. When I did the "show user" command at SQL prompt, the user is not "sys", instead it returned
" ". I followed the installation guide and tried to reinstall 5 times.
Every time I had the same problem. I was wondering if this is a bug in
the CD. How can I solve it?
Thanks,
Lillian

Got past this spot... Thanks to the beefier shared memory/semaphore settings in this website (from another response in this forum)
http://www.dbspecialists.com/4dbas/presos/oracle817solaris.html

Err when installing Oracle on solaris (URGENT) please help

while installing 10g database on solaris i am finding the following error
" ./runinstaller : line 56: /root/desktop/database/install/.oui: cannot execute binary file

Have you carefully followed the installation documents of your OS specific?
$ uname -a
By the way, Oracle has a good "Quick Installation Guide 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit)". Don't miss any pre-requisite steps. I have followed the same documentation to install and configure Oracle Database 10g on Solaris 5.10 - SPARC Machine.
http://download.oracle.com/docs/cd/B19306_01/install.102/b28053.pdf
Regards,
Sabdar Syed,
http://sabdarsyed.blogspot.com

Installing Oracle Patch Solaris 9 Oracle 9i

Hi Guys I have to install a PATCH that I downloaded from METALINK but I've never done it before so where should I load it and does the database has to be down.
Thanx.

You may find the README.txt/html file in the Patch directory when you unzip the patch and follow those steps carefully to install the patch.
Regards,
Sabdar Syed.

Install oracle 8.1.7 in Solaris Problem

I have completed to install Oracle in solaris and
created database, when I use sqlplus login to new created database
The following error is displayed:
"ora-07217 : sltln : environment variable cannot be evaluated"
The following is the environment variable for oracle user
HOME=/oracle_data1/oracle/product/8.1.7
HZ=100
IFS=
LD_LIBRARY=/oracle_data1/oracle/product/8.1.7/lib:/usr/openwin/lib:/usr/db/lib
LD_LIBRARY_PATH=/oracle_data1/oracle/product/8.1.7/lib:/usr/openwin/lib:/usr/db/lib
LOGNAME=eprc817
MAILCHECK=600
OPTIND=1
ORACLE_BASE=/oracle_data1/oracle
ORACLE_HOME=/oracle_data1/oracle/product/8.1.7
ORACLE_SID=eprc
PATH=/usr/bin:/usr/ucb:/etc:/oracle_data1/oracle/product/8.1.7/bin:/usr/ccs/bin:/usr/openwin/bin:.
PS1=$
PS2=>
SHELL=/bin/sh
TERM=ansi
TZ=Hongkong
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=400
set shmsys:shminfo_shmseg=50
set shmsys:seminfo_semmni=100
set semsys:seminfo_semmsl=1024
set semsys:seminfo_semmns=1024
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767

You may try to add the environment variable
ORACLE_TERM=vt100 which is not include in your envornment setting.

Installing Oracle 10.2.0.2 on Solaris 11 (Solaris Express) x86

Hi!
I have a problem with installing oracle on Solaris 11. When I ran installation program I got a message like this: "Wrong version of OS. The version must be 10".
Then program finished its work.
Is it possible to install Oracle 10.2.0.2 (or another version) on Solaris 11?

Solaris 11 is not certified with 10g R2, that's why you getting error.
Check link for more details => Certify - Oracle's Certification Matrices
Virag

Installing oracle 10g release 2 on spark solaris!! urgent help!

hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.

This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error in invoking ntcontab.o while installing Oracle 9.2.0.1.0 in Solaris 9

Hi all,
Pre-installation:
I install the oracle with user "oracle" which belongs to "dba" group.
The environment variables are
PATH=/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,Ultra-80/sbin:/opt/sun/bin:/opt/SUNWexplo/bin
LD_LIBRARY_PATH=/usr/openwin/lib
OPENWINHOME=/usr/openwin
ORACLE_OWNER=oracle
Also, i created /oracle folder for the installation of oracle
Synonym:
While installing oracle, I was encountered the error in invoking target ntcontab.o of makefile /oracle/OraHome92/network/lib/ins_net_client.mk while installing Oracle 9.2.0.1.0 in Solaris 9 unix machine.
The content of /oracle/OraHome92/install/make.log is as follows
/usr/ccs/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/OraHome92
(if [ "assemble" = "compile" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
(if [ "assemble" = "assemble" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.s ;\
/usr/ccs/bin/as -xarch=v9 -P -o ntcontab.o ntcontab.s ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
Error in finding run directory. Using default /opt/SUNWspro/binerror: Unable to
find current directory
*** Error code 1
make: Fatal error: Command failed for target `ntcontab.o'
Could anyone give me a suggestion how to fix the problem.
It's urgent
Many thanks,
Kelvin

If someone having above problem....
umount partitions where installing oracle and then check perrmisions to mount point and mount back.
This work for me.
Thanks

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

Can I install Oracle 8.1.7 on solaris 2.8

We have a working product which uses oci 7.x calls on solaris 2.7 OS and the oracle version is 8.1.7.
But when we installed oracle 8.1.7 on solaris 2.8 OS , We are unable to connect to Oracle data base using the same executables.
My question is : --- Is oracle 8.1.7 is supported on solaris 2.8 OS ?
thanks and regards

Yes! We made it only in 1 month, but now it works fine.
greets
hgs

Install Oracle on Solaris

Similar Messages

Maybe you are looking for