Install order, PS CS5 extended and LR3 upgrades...

I just purchased PS CS5 extended (upgrade from cs3 extended) and LR3 (upgrade from LR1). Which product should I install 1st, or does it matter?
Thanks for any suggestions.
Dan

Install 3.2 first, remove CS3, then install CS5. This should make sure that the correct app path is in the registry so 3.2 can find the path to CS5.
The reason people are having to reinstall CS5 is because when they install it, before removing the older version, the uninstaller for the older version removes the app path from the registry. One then must either reinstall CS5 or manually add the app path to the registry.
Doing it in the order I gave you should avoid having to jump through a bunch of hoops.
Rich
Edited to add KB article.

Similar Messages

I have installed adobe photoshop CS5 extended and I don't know where to find how to open it up.

I have downloaded photoshop CS5 extended and I don't know how to find where to open it up.

Which operating system are you using? It should open in the usual manner depending on your OS.

I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8

I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.

I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.

Upgrading photoshop cs5 extended to cs7 upgrade older version

upgrading photoshop cs5 extended to cs7 upgrade older version

NO. I want to upgrade to CS7, as that is the version I already own, and
want to install it on my computer, which already has cs5. When I try, the cs7
software says it cannot find photoshop software on the computer, although I
use it all the time.
Someone at Adobe help said my version of CS7, was too old to find the
version of CS5 on my computer and I should try the forum.
In a message dated 9/24/2014 7:10:40 P.M. Eastern Daylight Time,
[email protected] writes:
upgrading photoshop cs5 extended to cs7 upgrade older version
created by Jeff A Wright (https://forums.adobe.com/people/JeffAWright)
in Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6761437#6761437)

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place I can download the Install files from?

Pagemaker is ancient, obsolete and unsupported. It was discontinued over 10 years ago. (Though why it is still sold is a mystery.)
If you want to run PageMaker, your best bet is to use a Win2K or WinXP PC.
Otherwise move to Indesign or look at Serif's PagePlus or Scribus.

Installing Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services

Hi All,
Is it possible to install Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services. We are planning to use xenapp to publish these application.
Please let me know if this is a supported environment.
Regards
Radhika

As far as I know you will NOT be able to access OpenGL functionality through Terminal Services. as the OpenGL implementation provided in that environment is software, version 1.1 - not GPU-accelerated.
I seem to recall there was a thread about a year ago here where someone was trying to do what you are asking. I vaguely remember they were able to make it work, but I'm not sure. You might try doing a search of this forum.
-Noel

Hi what is basic diff between cs5 extended and cs 6 especially on the 3d

hi what is basic diff between cs5 extended and cs 6 especially on the 3d
need to do modeling for 3d printing
thanking u all kindly max geyer

I think that you may have the wrong forum. This is the forum for Audition, Adobe's audio editing software.

I Had CS5 Extended and the Installer Upgraded me to the CS6 Standard Version

Can someone explain this to me in terms I can understand?
I was happily running CS5 Extended which I purchased about a year ago.
I installed the CS6 Beta and it installed the Extended version, which I assumed was the only beta available.
I pre-ordered CS6 about a week ago. When the script asked me what version I had, I checked CS5 Extended. It made no reference to CS6 Extended nor did it ask me which version I wanted.
I just downloaded and installed CS6 about an hour ago. I removed the CS6 Beta first as instructed. I registered the install with the serial number I was given.
I now have CS6 Standard! What must I do to get the Extended version I was previously running?
(Also, there is a bug still extant in CS6 Bridge I was going to report the other day only to discover Adobe had made the CS6 Beta forum Read Only. Let's get this Standard versus Extended problem fixed first.)
Gerry

Sounds as if the serial number Adobe gave you is for the standard version. Perhaps a mistake on their part or perhaps an ordering error somewhere along the line.
I have the CS5 Design Premium and I also have CS4 Extended. I decided not to upgrade the CS5 DP so I just upgraded CS4E to CS6E. No problems at all with the install so far.
Oops, a problem! Camera Raw as shipped with CS6 does NOT support the Canon 5D Mark III. What a bummer. Looks as if Adobe dropped the ball.
Message was edited by: CR Henderson

I'm using Adobe Photoshop CS5 Extended and am having trouble with it.

I just reinstalled Photoshop CS5 Extended from my original disk because I was having trouble with it. I did do an uninstall before installing. Every time I quit Photoshop I get this message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders." Can you tell me what to do to fix this? I went to get info and made changes to read and write, but it made no difference. Thanks for your help.
Richard

Some folders are hidden in the Finder. Use the "Go to Folder" command for that.
Go menu > Go to Folder, enter:
/Users/YOURUSERNAME/Library/Preferences/Adobe Photoshop CS5 Settings
Gene

I am using Photoshop CS5 extended and I have tried to get an update to be able to use raw with my D600 and it won't give me any options. Any recommendations othere than to go to PSCC and LRCC?

Is there a way to update PS CS5 extended to allow me to use raw with my D600. It works with my D300 and D90 raw but not with my D600.

CS5 Adobe Camera Raw stopped at 6.7 and the D600 support was introduced in 7.2 for CS6.
You are eligible to upgrade to Photoshop CS6 for $200 Standard or $400 Extended if you do not want the Cloud.
Creative Suite 6
Gene

Silent install Photoshop CS 6 extended and how do i get it?

I hva bought a license for Photoshop CS 6 extended, and i need to to get a hold of a .msi (microsoft installer) file for this application, where do i get it?
I also want to do the silent install for this application, with both installation and registration of the product using my license. I have no internet connection and i am wondering if this i possible?

Hi There,
Please go through the doc below to see the workflow to create a .msi.
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/AdobeApplication ManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
Thanks,
Ashish

Volume as install disk for Guest Domain and Live Upgrade

Hi Folks,
I am new to LDOMs and have some questions - any pointers, examples would be much appreciated:
(1) With support for volumes to be used as whole disks added in LDOM release 1.0.3, can we export a whole LUN under either VERITAS DMP or mpxio control to guest domain and install Solaris on it ? Any gotchas or special config required to do this ?
(2) Can Solaris Live Upgrade be used with Guest LDOMs ? or is this ability limited to Control Domains ?
Thanks

The answer to your #1 question is YES.
Here's my mpxio enabled device.
non-STMS device name STMS device name
/dev/rdsk/c2t50060E8010029B33d16 /dev/rdsk/c4t4849544143484920373730313036373530303136d0
/dev/rdsk/c3t50060E8010029B37d16 /dev/rdsk/c4t4849544143484920373730313036373530303136d0
create the virtual disk using slice 2
ldm add-vdsdev /dev/dsk/c4t4849544143484920373730313036373530303136d0s2 77bootdisk@primary-vds01
add the virtual disk to the guest domain
ldm add-vdisk apps bootdisk@primary-vds01 ldom1
the virtual disk will be imprted as c0d0 which is the whole lun itself.
bind, start ldom 1 and install OS (i used jumpstart) and it partitioned the boot disk c0d0 as / 15GB, swap the remaining space (10GB)
when you run format, print command on both guest and primary domain on this disk you'll see the same slice/size information
Part Tag Flag Cylinders Size Blocks
0 root wm 543 - 1362 15.01GB (820/0/0) 31488000
1 swap wu 0 - 542 9.94GB (543/0/0) 20851200
2 backup wm 0 - 1362 24.96GB (1363/0/0) 52339200
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
I havent used DMP but HDLM (Hitachi Dynamic link manager) seems not supported by ldom as i cannot make it work :(
I have no answer on your next question unfortunately.

I have photoshop CS5 extended and wish to upgrade to CS6 Extended.

The Adobe release says that this should be possible, but I can only find the student teacher editions. How do I purchase the Photoshop CS6 Extended as a perpetual license?

JatinDembla wrote:
Perpatual license of Photoshop and other Adobe creative software is not avialable to purchase now.
It is still available to purchase. Just hard to find on the Adobe website.
http://blogs.adobe.com/photoshopdotcom/2013/05/answering-your-questions-about-photoshop-cc .html
Q: Can I still buy a boxed/perpetual version of Photoshop?
A: Photoshop CS6 is still available for purchase as a perpetual software license, via electronic download from Adobe.com and authorized resellers. The Photoshop team will provide bug fixes and security updates for Photoshop CS6 while it is still available for purchase. New features and all the other Creative Cloud services, however, will not be added to Photoshop CS6.
Purchasing link:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?start=10

I am having problems installing adobe photoshop cs5 extended

Hi,
When I install this version of photoshop, I type in the serial number which allows me to install the program, then once installed it asks for another serial number in which I type the same number in only to be told it is an invalid serial number.
I was wondering if anyone is able to help me figure this problem out.
Thanks Leeroy

You've bought an upgrade version and you've entered your upgrade serial number.
The second serial number requested is one from an earlier version of Photoshop which made you eligible to buy the upgrade.
If you don't have an earlier version serial number then you've bought the wrong version. You need to return the upgrade version and buy the full version.
Return, cancel, or exchange an Adobe order

Using CS5 extended and Lightroom 5

Hi,
Using Photoshop CS5 and Lightroom 5, will RAW (NEF) files from Nikon D7100 be supported? Or do I need to upgrade to CS6?
Thank you!

You need to upgrade to CS6. The 7100 requires ACR 7.4 at least and that's only available with CS6 and up...
Camera Raw plug-in | Supported cameras
Mylenium

Install order, PS CS5 extended and LR3 upgrades...

Similar Messages

Maybe you are looking for