Install OS on new SSD Drive

I have a late 2008 MacBook Pro. It always ran perfectly except the HD. The last time i lost everything i dumped it and got a new one. I wanted to revive the old one since it was such a powerful machine.
I installed a new 120GB SSD and began to install the OSX.
1. Do i have to install the original OS X the machine came with and then upgrade 3-4 times to get it to snow lepard?
2. Do i have to install w/an OS X disc in the drive?
3. The Grey Apple screen comes up and goes in circles endlessly, anyone have insight into how to get it actually load the OS successfully? locations?
very frustrated
ty
m

Have you formatted the new hard drive?  If not go to DISK UTILITIES>ERASE and format to 'Mac OS Extended(Journaled).
Back up your user data on a third disk as an insurance policy.
Then in Disk Utilities open RESTORE.  Drag the internal drive into the SOURCE field and the new drive into the DESTINATION field.  Click on the restore button.  Depending upon how much data you have, this may take a while.
Now swap the drives and you should be able to boot you MBP with the new drive.  (This process makes two HDDs with identical data on them.  No need to use your old install disks,)
Ciao.

Similar Messages

  • I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

    I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

    Tech support is not normally available on weekends.  You should contact them as soon as the weekend passes and pick up where you left off with them.

  • Approach for fresh OSX install to new SSD drive with restore from TimeMachine

    I have an early 2010 MacBook Pro with running Mavericks with FileVault 2 encryption.  The drive seems to be failing.  I am not able to boot it up.  I get a "Prohibitory" sign with freezing.  I have attempted various recovery steps:  booting with Command-R, running Disk Utility, attempting to do a full restore from TimeMachine, turning off encryption via terminal/command line with no success.  I am not able to mount the disk volume.  DiskWarrior doesn't seem to support bootable Maverick volumes.  I don't the the existing drive deserves additional time.
    I've purchased a new SSD drive and I plan to do a fresh OS install on that drive, followed by a restore of my most recentTimeMachine backup to that drive.  My backups are not encrypted.  Because the current HDD seems to be toast and is running FileVault 2, installing from scratch and then restoring apps and data seems to be the most realistic approach.
    Can somebody please tell me what the preferred sequence of steps would be to do this?  Particularly the initial OS X install?  Since the new drive will not have a recovery partition, I assume that I cannot do Command-R at boot-time to start the install.  My system has a DVD drive, but I don't have a Mavericks install disk.
    Comments appreciated...

    Restart the computer. At the chime press and hold down the OPTION key until the boot manager appears. There should be a disk icon for your Time Machine backup drive. Select it and click on the arrow button below it. This will start you into a hidden Recovery HD on your Time Machine backup drive. Select the Disk Utility option and click on the Continue button.
    1. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    2. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    3. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    5. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    6. Quit Disk Utility and return to the main menu. Select the Install OS X option and click on the Continue button.
    7. Be sure to select your SSD as the installation target.

  • I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

    I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
    Questions that I would like to get answered.
    1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
    2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
    3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
    I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
    Any help is appreciated.

    Let me first document the steps that did not work and then I will document the steps that worked.
    1) Replaced the hard drive with SSD.
    2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
    3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
    4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
    5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
    6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
    7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
    8) I had 236 GB to restore so took 3.5 hours before it was done.
    9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
    10) Heard the chime and after that it was a white screen with no Apple logo.
    Was visibly upset and started thinking what my next move will be. Then tried these steps
    1) Again powered off the machine.
    2) Connected my internal HDD once more as an external drive
    3) Powered on and on hearing the chime, pressed Command-R as before
    4) Once the OS X utilities screen popped up, this time chose Install OS X
    5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
    6) Installed OS X by following the prompts.
    7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
    8) Chose the option to move the data from my original HDD.
    9) Took another 3 hours to move the data.
    10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
    11) Booted successfully and all my content is now accessible on the new SSD.
    Moral of the story - It is the spirit that counts.

  • My late 2012 mac mini boots slow with new ssd drive

    So here is the situation.  I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3,   used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly.  I than tested it for dozens of reboots and it worked fine.  I then took apart my mac mini and removed the original hard drive and installed the new ssd drive.  When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive.  Aren't ssd drives supposed to be a lot faster?
    My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process.  Finally it can't find the drive so it boots to the ssd drive.  All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart".  After these steps your mac mini will now boot in about 17 seconds.  Issues solved. 

    Yes, my solution fixed the issue.  I went from a 47 to 53 second boot time to a 17 second boot time.  The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini.   This is my first post and I wasn't sure how to post this as a tip.  I have another tip regarding usb 3.0 hubs. 

  • Should I put the new SSD drive in main HDD bay or the Superdrive/Optical bay for a Mid-2010 Macbook Pro?

    Hello All,
    I'm considering getting a new SSD drive to add on to my Mid-2010 Macbook Pro (13 inches, unibody), and wondering which one of the following two options I should really adapt: 
    (1) Replace the original OEM hard drive in the main bay with the new SSD drive, and then remove the Superdrive (or the optical CD drive) and to be fitted into an external enclosure for using it externally in the future, and then relocate the original OEM hard drive into the Superdrive position, so both the new SSD (preferably for running the OS and system files) and the old OEM hard drive (for storing media and documents for example) could be used; and
    (2) Keep the original OEM hard drive in place in the main drive, and buy a superdrive/optical drive caddy to goes with the new SSD drive, and together place the new SSD drive fitted inside the caddy into the position of the Superdrive/Optical CD drive, and configure the boot preference to be booting from the Superdrive/Optical Drive (which is now the SSD drive with OS and system files);
    I've done some researches and some suggested that option (2) is better approach for at least two reason: (a) the MBP main drive come with some sort of shock proof sensor, so placing the original optical hard drive in the main is better than placing it in the super/optical drive where there is NO shock sensing feature provided, and placing SSD in the super/optical drive, one doesn't really have to worry so much about shocks; and (b) as during the process of shutting down the MBP, for optical hard drive, some power will sometimes needed to finally spin down the drive, but if such optical hard drive is place in the superdrive, the power maybe cut off right away when MBP shut down, which may cause issue to the optical hard drive in a long run as it never properly spin it down.
    Then the main concern is that, if I adapt option (2) above, placing SSD in the super/optical drive bay and install and running the OS from there, will it decrease the performance (i.e. speed, latency, and etc.) as if i was to put the new SSD in the main drive?
    Also, any suggestions with respect to Samsung 840 EVO vs. Samsung 850 EVO (250GB)? any well-rated HD caddy aside from OWC for moving the main HDD to optical CD bay? and perhaps an external enclosure for the Superdrive?  Thanks in advance for any comment and/or suggestion. 
    - Jack

    Could you provide some rationale(s) behind it?  As far as I know, the mid 2010 Macbook Pro, the HDD is running via the SATA interface at running at 3.0 Gb/s, which is SATA II, and the Super-drive and/or the Optical drive, which is also running via SATA II interface, so I would assume the performance (i.e. primarily in speed) would be similar if not the same by placing the SSD drive in either one of the two places. 
    Also, wouldn't it be better by placing the SSD in the optical so the OEM HDD could be kept in the original main bay since it has the shock-sensing feature there?

  • Clean Install Yosemite onto new SSD (Also, what is TRIM?)

    Hi,
    I've been researching how to replace the Hard Drive on my Late 2011 13inch Macbook Pro (MacBookPro8,1 / 2.4 GHz / Intel Core i5 / SATA III) with a new SSD (maybe a Samsung 840 EVO) and clean install Yosemite onto it. I've found a few ways to do this on the support forums and the macrumors forum, but I want to confirm if I can do it this way:
    1. Plug new SSD into the Macbook via a USB cable
    2. Download Yosemite onto current Macbook Hard Drive. When I'm prompted to install, chose the new SSD from the list. Complete Installation.
    3. Remove old Hard Drive from Macbook and plug new SSD in it's place (and not in the optical bay).
    Would this work? I have another external hard drive with all of my documents, pictures and music on which I'm just going to manually remove over, and have no problem doing. I can also download the iLife programs directly from the App Store so I wouldn't be missing out on those either (I do have the iLife '09 discs too). I've also read about creating a bootable USB using DiskMaker X, but I feel the route I outlined would be easier.
    Am I missing anything? I do have the EFI Firmware v2.7, so the problems the 2011 MacBooks were having with SATA shouldn't be an issue during this. Also, during my research, I found a references to something called TRIM. Can someone explain TRIM to me?
    Thanks,
    Steve

    Thanks for the response and confirming I can clean install Yosemite onto a new SSD using the process I listed in my initial post.
    I have a 13'' MacBook Pro with Yosemite already installed onto it so my graphics card should be set. After almost a month of using it, I haven't noticed any issues on that end.
    I guess this TRIM thing is a totally separate subject from this thread. I read Apple is no longer supporting third-party SSD for TRIM support. If you turn it on, but keep a security feature on, you risk your computer not booting correctly. It looks like the only way to have TRIM enabled on a SSD using Yosemite is to have an Apple supplied SSD, or an SSD that can trick Yosemite into thinking it's Apple supplied (like the Angelbird Wrk for Mac SSD).
    I've also done a good amount of research that TRIM is only necessary if you're saving a lot of items to the hard drive in one sitting (like photoshop). I primarily use my Mac for Pages (which saves my documents into the cloud now), iTunes and Safari. I guess this would fit me into the "casual user' criteria? I've also read that if you don't use TRIM, your SSD uses "Garbage Collection" (which actually sounds terrible) to keep the SSD informed on what data can be overwritten since it's been deleted by the user. I read that most modern SSD hard drives have a pretty decent Garbage Collection function, so if you leave your computer idle, keep "Put the hard disk(s) to sleep when possible" unchecked, the SSD will run Garbage Collection on it's own and that should be sufficient enough to keep the SSD in good working order.

  • Install windows on new SSD

    I own the HP Pavillion P7 1449, and I just finished installing a new SSD drive. I am currently running windows 8, and I want to now use the SSD as my boot drive. My computer did not come with a windows product key, and I don't believe I was given a windows installation disk, do I have to buy a new key to install windows onto the new drive?, or can I use the key which is on the motherboard?

    Hi,
    Backup your data and create the external HP recovery.
    What BIOS level is PC running?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfull restarted my sy

    I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfully restarted my system using the SSD as the boot device.  I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins.  I successfully tested the key features that I frequently use.  Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found.  All drives are available on the system via the Finder and Disk Utility.  I can access all drives including the old MAC HD which is no longer the boot device.  I've even attempted to launch Photoshop from the old device yet the same error persist.  Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch?  I've even restarted my system several times to see if that would resolve the issues.  Does anyone have any recommendations for this issue?  Have you previously address this issue? 
    Thank you Gregg Williams

    Boilerplate text:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html
    --OB

  • How do I install Lion on new flash drive?

    How do I install Lion on new flash drive?

    For an emergency pocket size boot device?
    Or something else?
    Or, do you want to setup the Lion Installer for clean or reinstalls on flash memory card, which is what many use?
    Create an OS X Lion Install disc
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
    USB on Intel Macs has always supported booting, that is what MacBook users have had to deal with. With a Mac Pro you have four internal drive bays, Firewire, and all of those are more suited and capable.
    Old thread, never die do they.

  • Can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?

    can i install a 32gb msata ssd drive on my hp envy 6 1002tx laptop?
    Is their any msata port in my laptop motherboard?
    is their any problem by installing msata in my laptop?

    Hi,
    Please check the following documnet to find down a slot on the system board because this is an option:
       http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03282148/c03282148.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?

    Hello All,
    Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?
    I have a new Corsair GT SSD sata 3 drive on my mack book, I have read on corsair web page that is good tho activate the AHCI and TRIM but I cant find information about how to do this on OS X.
    Thank you all

    That's information for non-Apple hardware. You can activate TRIM using third-party software: TRIM Enabler 2.2. However, most new SSDs should not need TRIM activated on the Mac.

  • I need to deactivate this copy of Acrobat X to install on a new hard drive.

    I need to deactivate this copy of Acrobat X to install on a new hard drive.  When I click on help, there os no Deactivate or Activate.  Wjat do I do?

    I do not know.  I have a serial/key number for the software.  Can I
    install it again and use the same number?
    Denis

  • My hard drive is fried.  I need to reinstall moutain lion to a new SSD drive.  How do I install without media?

    My hard drive fried.  I can't reinstall from the OSX utilities because it only shows the recovery partition.  I was thinking about adding an SSD drive.  But I dont know how to install OSX mountain lion without any media.  What are my choices?  What should I do?

    First, the recovery option is built in to OS X - not the disk. If you install the new drive without formatting it first or without having an OS on it, it will not work (at least as far as I know). Most drives need to be formatted and it needs to be Mac OS Extended (Journaled) and use the GUID Partition Scheme.
    You said that your hard drive is fried but that you can access the recovery? The Command + Option + R is the internet recovery which means it accesses Apple's servers and a limited number of things including disk utility. I've not dealt with this type of problems, so I'm not sure, but If you can access that and you have your new drive in an external enclosure and attached, then you may be able to use Disk Utility on the recovery to format your new drive and then choose to install the OS directly on it.
    The second possibility - and, according to the following article, this should work directly (I've not tried it, so I can't guarantee it will):
    http://support.apple.com/kb/HT4718
    The easiest way would be to attach the new drive in an enclosure and use your internal's disk utility to format and then clone the entire thing to it, but that does not appear to be an option. Unless...... do you have a bootable clone backup or a Time Machine backup?

  • Upgraded hardware, and went from XP to Win7 - how do I transfer/install CS5 onto new SSD hard drive?

    I recently upgraded all my computer internals; new mobo, Samsung SSD (solid state drive), CPU and ram. Also went from XP Pro to Win 7 Pro, with Win 7 Pro now residing on the new solid state drive. I still have the old 1TB Serial ATA hard drive connected as a storage device, and this is where CS5 resides. But of course, my CS5 applications are now unusable.
    Can someone please give me some guidance as to how to transfer the CS5 installation from the old HD (XP Pro) to the new SSD (Win 7 Pro)? I started doing some research, and read about first "deactivating" CS5, but I cannot open any of my CS5 applications to "deactivate". So I am stumped. I am reticent to attempt a new install from my CS5 disks until I learn the proper process..........
    Any advice would be greatly appreciated.
    Dave F. in Rhode Island

    don't transfer, reinstall.
    if you need to reset your activation count, contact adobe support -  http://helpx.adobe.com/x-productkb/global/service1.html
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for