Install OS X 10.5 on powerbook G4 help
i need to upgrade my operating system from tiger 10.4.11 to leopard 10.5. my computer meets all the tech specs but i wanted to find out of i can install any version of leopard OS X 10.5 (e.g. 10.5.6) or if i have to start at OS X 10.5 and then update via software updates (I need to get up to 10.5.8 for the iphone 4 to work). i'm having trouble finding OS X 10.5 in general, but have been able to find 10.5.6.
maikib wrote:
i'm having trouble finding OS X 10.5 in general, but have been able to find 10.5.6.
Be careful, 10.5 disks can be hardware specific disks and all seem over-priced.
You can order them from Apple Store's phone sales, 1-800-MY-APPLE (1-800-692-7753), for $129 USD. Alternatively, Customer Service and Sales Support at 1-800-676-2775.
-mj
Similar Messages
-
Can't install iTunes 10.7 on my PowerBook G4 PowerPC
Can't install iTunes 10.7 on my PowerBook G4 PowerPC
iTunes 10.7 requires Mac OS X 10.6.8, which requires an Intel Mac.
(71832) -
Installing CS5 Design Standard on my powerbook
i would like to install CS5 Design Standard on my new Powerbook without a DVD reader and can't find the place where i can download the two files (design standard and acrobat professional)? I have the two serial numbers.
Thank you very must for the information.
I still have a problem by entering my serial numbers. When I check the mail with the the serial numbers that I’ve received in 2011 from Adobe (for CS5 Design Standard en Adobe Professional) it is mentioned that the language is DUTCH.
Could that be the problem why I get a message “serial number incorrect” ? I think the software I downloaded is an English version.
Greetings
Jan Germonprez
Belgium
Op 4-jan.-2015, om 16:46 heeft Mylenium <[email protected]> het volgende geschreven:
installing CS5 Design Standard on my powerbook
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Creative Suites - View the full discussion <https://forums.adobe.com/message/7063941#7063941>
Download CS5 products <http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html>
Mylenium
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063941#7063941 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063941#7063941
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creative Suites by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=32 54>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>. -
Can't boot after installing 10.5.4 on 17" powerbook
I've has Macs since 1987 and have never seen this one. I bought a family pack of 10.5 and it installed perfectly on both my Intell Powerbook and my wife's EMac. yesterday I tried to install it on my mother-in-laws 17" power book. It seemed to be working fine even though I had to ignore some Norton warnings. Even managed to get on the internet. So I shut it off. After a couple of hours decided to try it again just to make sure everything was working before I sent it home with her. The chime sounded, the little propeller thing started turning but after quite a while I got a picture of a circle with a line through it. Kind of like those warning signs like no smoking or no whatever without any words. It stayed like that for 15 minutes until I finally shut it down. Tried to reboot using the Leopard install DVD holding the C key down and got the same thing. Got kind of panic cause my MIL hadn't backed up for awhile. Finally got it to reboot using the 10.3 install discs so decided to just install 10.3 and see if I could back up everything before trying again on 10.5. Two questions:
What is that symbol ie what does it mean? and
What do I do about it?
Thanks '
GSNormally this issue would only appear with Disk Doctor or Speed Disk on any version of Mac OS X. Since you are using anti-virus, then it probably was more likely due to something else that made the directory damaged. See my FAQ* on the directory:
http://www.macmaps.com/directoryfaq.html
Norton's anti-virus and firewall are actually relatively redundant except in cases where you are trying to avoid becoming a "typhoid mary." If using them, make sure the version they have has been tested with your operating system. ClamXAv is a much better anti-virus application for more current operating systems as it offers less bloat on the operating system.
- * Links to my pages may give me compensation. -
Running Win7Pro64. Tried to update to 3.6.4 and it failed. It said to download the whole program so I did. Tried to install and says that the "License File" is missing. SO I go to un-install 3.6.3 myslef with Control Panel. All that did was remove Firefox as a listed program in control panel, all of it is still there in Explorer and it runs fine. So I go to use Helper.Exe under the Uninstall folder of Mozilla Firefox and when I click that, it says "Not a Valid Win-32 Application" What's up with that?? All I want to do is remove 3.6.3 so that I can clean install 3.6.4. I tried installing 3.6.4 two different ways with failures both times. I tried to remove 3.6.3 using two different ways, and that also failed both times.
== This happened ==
Just once or twice
== I tried updating to 3.6.4. It failed both with the update and the full download, so tried to un-install 3.6.3 in control panel, then helper.exe with no luck.You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/ -
those are all of the details.
I know the Firefox developers had good reasons for introducing this feature, but they failed to consider their users who are web developers.
I've installed a web server on my computer to help with web design, and I access the homepage through http://localhost
However this won't work in offline mode, and (with my dial-up connection and all) it's not practical to always dial in to my ISP just to have Firefox start in online mode, plus I don't need to be *actually/literally* online to access my local web server. And the extra clicks to File -> Work Offline are a pain.
The best option IMHO would be to provide a pain-free way to disable this setting for advanced users. Emphasis on *pain-free*.
My 2 cents, for myself and (hopefully) on behalf of the poor, forgotten web designers out there. -
I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help
I have eactly the same problem - it seems that the downloaded version on MBA is version 6.0 and on iPad is is version 2.0 -
Issue is when i tried to save the presentation on MBA Keynote 09 - Keynote crashed.
I tried to save is as Powerpoint in MBA and it crashed as well!
Message was edited by: Innovaxin -
Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?
Work through the suggestions in this article:
Mac OS X: Gray screen appears during startup -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
i have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help before i throw the computer out the window!
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Error on installing oracle apps 11i on RHES3 _URGENT! HELP~
Hi can anyone help on how to resolve i error i get when i install the oracle application 11.5.10.2 on RHES3. i follow and applied all required patches but i received an error:
FINISHED INSTALL PHASE : 9i RDBMS : Fri Aug 22 03:03:28 PHT 2008
There was an error while running the command - su oradb -c /d01/vision/visdb/9.2.0/temp/VIS_oratest/adrun9i.sh APPS APPS
Exception in thread "main" java.lang.RuntimeException: AC-00002: Unable to create log file - /home/oraappl/oraInventory/logs/OracleHomeCloner_08220303.log
Raised by oracle.apps.ad.util.LogFile
at oracle.apps.ad.util.LogFile.appendLogFile(LogFile.java:343)
at oracle.apps.ad.util.LogFile.log(LogFile.java:233)
at oracle.apps.ad.util.LogFile.info(LogFile.java:212)
at oracle.apps.ad.clone.util.OracleHomeCloner.registerOracleHome(OracleHomeCloner.java:272)
at oracle.apps.ad.clone.util.OracleHomeCloner.main(OracleHomeCloner.java:859)
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Database Availability Check
HELP PLEASE!Exception in thread "main" java.lang.RuntimeException: AC-00002: Unable to create log fileDo you run RapidWiz as root user? Is this a multi-user or single user installation?
-
Hello,
While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
Message was edited by: Juan VeranoIs there anything else beside the number 2203?
Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/ -
I erase my mac at disk utlity...after that My Mac can't reinstall, after I press continue to instal he say cnt install n pleas cal apple care..please help my macccc... ..Mac pro 13
Huzaie wrote:
I erase my mac at disk utlity...after that My Mac can't reinstall, after I press continue to instal he say cnt install n pleas cal apple care..please help my macccc... ..Mac pro 13
There is a problem with the activation process between your machine and Apple to verify your machine is allowed to reinstall OS X.
You will have to call AppleCare to resolve this issue. (even if you did't purchase AppleCare you still call their number)
https://support.apple.com/kb/HE57
Another method is to take it back to the AppleStore you purchased the machine at. -
User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!
First, ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others
Maybe you are looking for
-
Tells me i can't use cover flow?
hello, i just reinstalled windows xp home on my computer, itunes gives me the "itunes is unable to browse album covers on this computer" my specs are the following: windows xp home sp3 latest directX updated drivers (i think, windows was having a pro
-
PL/SQL using BULK COLLECT and MERGE
what i am trying to do is to use bulk collect to create an array of row data, then loop through the array and either insert or update a table, hence, merge: FORALL i in ID.first .. ID.last SAVE EXCEPTIONS MERGE INTO table1 t USING ( select ID(i) ID,
-
Looking for a script that will save as v11
I need to save a book and all its files as version 11 (from version 12)
-
Synchronisation between server and local systems
Hello guys, I hired a Vserver running with Debian and would like to synchronise it spaced (after/before start/shutdown of my local systems and in between every 30 minutes or so) with my local systems, more precisely with my home directories or some d
-
Using aux-in cable for music play-back in car.. help needed
Has anyone had any issues using an aux-in cable for music playback with the S3? I know the cable works fine on other devices (itouch, moto x, etc) and headphones work fine on the device, but I cannot get thing to work using the aux-in cable in my car