Install OS X Lion on new hard drive without a physical copy/install disc

Hi,
i´ve just upgraded my new macbook pro with a bigger harddrive. While I don't own (didn recieve) a physical copy of OS X Lion, i can't (respectivily don't know how to) install the operation software on the new HD. Is there a way to install OS X Lion anyhow?
Greetings
Stan

You first need to install Snow Leopard and then, you can install Lion via the App Store.
I suggest making a copy of OSX Lion on a USB key. "Lion Diskmaker" from "macupdate" will walk you through the process.

Similar Messages

How can I re-install CS2 upgrade on a new hard drive without serial no. of previous Photoshop 5?

A new hard drive has been installed on my G4 Mac with OS10.4. I am trying to re-install CS2 Premium on the new hard drive but I no longer have the serial number of my previous Photoshop 5. I need to enter this as the CS2 was an upgrade. I have spoken to Adobe technical support but they no longer support CS2 so are not able to help. They recommended that I try the Adbe Forum. All my Adobe products have been bought legitimately. I know people manage to use pirated Adobe software so there must be some way for me to activate a legally bought product.

Michael
Thank you for your email and suggestion.
I have tried that and the only product listed is my CS5 Design Premium (which was an upgrade), none of my previous Adobe products are listed.
I am now looking to see if I can buy an old version of Photoshop that will work on a Power PC G4 Mac with OS 10.4.
I only need Photoshop on that Mac to paint from, not the rest of the Suite.
It is infuriating that I already have a legitimately bought Adobe product (as all mine have been) but I am unable to use it.
Regards
Trevor

Hi, I have a late 2008 iMac with a new hard drive. How do I install Mountain Lion from my bootable USB flash drive.

How do I install Mountain Lion to a new hard drive without having the recovery partition on it.
I have the USB flash drive with software on it but when I switch my Mac on all I have is a white screen & a flashing question mark.
ATB,
Steve.

Did you use LionDiskMaker or DiskMaker X?
Boot the machine with the option key down until you see your bootable USB stick. Select the latter, and reboot.
When the installer boots up, you will first need to choose Utilities and Disk Utility. Select the target HD device name and then the partition tab. Select 1 partition, name it Macintosh HD. Format is Mac OS Extended, and option is GUID. Apply. Exit Disk Utility and return to the installer, which will now show your newly partitioned HD as available for install.
When OS X is installed and all updates applied, press shift+command+U and run disk utility again. Verify/repair permissions and verify the boot disk.

How to install a new hard drive without bootable disc/usb

Hi- my hard drive has totally failed and although I can get into disk utility it won't let me create images and keeps coming up with input/output errors when I try.
I don't have another mac to work from and have no discs whatsoever even for older OS versions
I've ordered a new hard drive(a seagate 750GB 7400rpm one) but how do I get mountain lion on the new hard drive without any discs? If I just put in my new hard drive will it come up with an option? I have a mid 2009 MBP if that helps

I have a mid 2009 MBP if that helps
Here is how it helps:
You need the Utilities from Recovery_HD. Your broken Mac can boot from a Thumb drive.
Use this article to download this Utility to copy the Recovery_HD from your older, working Mac to a minimum 1GB USB thumb drive:
OS X: About Recovery Disk Assistant
Then boot the new mac with the thumb drive by holding down Alt/Option, wait wait wait while it draws an Icon for each bootable Volume, choose the Recovery_HD, choose proceed arrow, and use Disk Utility to erase the drive and create GUID partition Map, 1 partition, Mac OS X Extended (journaled). Then install Mac OS X by download.

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contactin

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contacting you

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

I have a G5 with a brand new hard drive,when I try and install the os I get a panic we are hanging error. What can I do to load the os

I Get a panic we are hanging error when trying to install the os on a new hard drive on a G5

Yes, the hard drive needs to be formatted and OS X must then be installed.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit Disk Utility and return to the installer. Proceed with the OS X installation.
It's only a lost cause when nothing else works.

Installing a new hard drive and want to re-install Photoshop

I need to install a new hard drive and want to re-install Photoshop. Since I will installing a new OS, when I deactivate Photoshop from the old hard drive, should I permanently deactivate or suspend activation?

Help > Deactivate

Installing OS X on a NEW hard drive

I just installed a new hard drive on the macbook pro. however, when i run the installation disk it never actually installes os x instead it trys to install the applications, but cant find the drive. How do I install OS X on a new hard drive? Thanks.

Hello,
The first thing you need to do is partition and format the drive.
From the OS X installation screen, go up to the menus at the top, and locate Disk Utility.
Launch Disk Utility.
Now, select your hard drive on the left.
Then, click on the Partitions Tab.
Now, choose the single partition option (unless you want to divide the drive for some reason). Then, give it a name.
Choose the format "Mac OS X Extended (Journaled).
Now, click on the button to partition the drive.
When it's done, exit Disk Utility.
Now, proceed with the installation. If it still won't see the hard drive, then re-start from the installation disk again and try it again. It should see the hard drive now and permit you to install on it.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
http://support.apple.com/kb/ht1661
http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

How to install Windows XP on a new hard drive in desktop computer

Have a Lenovo desktop. I replaced the defective hard drive. Obtained Windows XP installation disks from Lenovo. I received recovery two
Recovery CDs, namely Rescue and Recovery CD and Product Recovery CD along with 5 CD Roms ( 1of 5 through 5of 5).
I want to install Windows XP in my new Hitachi hard drive. Should I use only the 5 CD ROMS 1 thru 5, leaving out the Recovery and Rescue CD
and Product Recovery CD Rom.
How to I install Window XP in my new hard drive? I am not a computer
wizard. As a retired IBM senior citizen I need some help from the community. I am not cognizant with the steps to follow. I am a new
member of this great community.
Thanks a bunch ! padman
personal informations removed for your own security

padman215, welcome to the forum,
you need to boot from the Rescue and Recovery cd and select to recover the system and then to recover to factory state. It will then eventually ask for the other discs.
Please be sure that you read the messages carefully; if it asks for a supplementary disc, (which you don't seem to have), you need to click on "no" should it ask for one - this throws alot of people.
Happy installing
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Trouble installing 10.4 on a new hard drive

My hard drive died, so I'm trying to install 10.4 on a new hard drive. I'm using the same disk that came with my laptop. I get as far as "select a destination" and the hard drive doesn't show up to choose. I saw another post that suggested partitioning the hard drive first, so I did that, and still no luck. Can anyone help?

Thanks for the welcome, and for the attempt to help. I'm starting to wonder if I got a bum replacement hard drive? I've just restarted twice, it now takes FOREVER for the apple and the little spinny thing to show up when I start up and hold down the C key, and now when I go to disk utility the hard drive doesn't show up in the list of choices at all. Do you think it's worth pulling out the hard drive and sticking it back in again? I have no idea if that will make any difference?

Need Help Installing an OS on a new Hard Drive

H, I just installed a new Hard Drive on my G4. My problem is I cannot find the original G4 install discs.
I do have OSX Panther discs which I bought later. Can I use these to install a new OS?
How would I do this as the new Hard Drive is brand new and probably not formatted? Do I power up the mac and load the Panther install disc 1 or is this not the correct procedure?
Also I have an external LaCie CD drive because the one in the mac doesn't work. Will the external LaCie CD drive be recognized when I put the OSX Panther discs in it to install an OS on my new Hard Drive?
Sorry for so many questions but I don't want to mess this up.
Thanks

Thanks for replying Thomas. Well my G4 Hard Drive was shot so I took it out and installed a new one so I have to reinstall everything (new OS & all applications). I tried to use Super Duper to Clone the HD but the HD was too far gone, so now I need to install an OS on the new Hard Drive.
I can't find my original G4 install cd's. I do have Panther OS discs and an iLife disc I bought awhile back. Can I use these instead of the original G4 install disc?
Here's the process to install a new OS as I understand it. Please correct me if I am wrong or am missing a step.
1) Put the first Panther install disc in the cd tray.
2) Power up the G4 while holding down the "C" key
3) Follow the installation instructions
Thanks!

New Hard Drive and drivers are not installing

I recently got a new hard drive and now I cannot install drivers from the recovery disk.
mobile intel 4 series express chipset family
nuvoton CIR Transceiver
nuvoton HID CIR Receiver
Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
INtel High definition Audion HDMI
I receive device status for each one of:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged or that might be malicious software from an unknown source (code 52)
HELP

Which computer? There is a label on the bottom.
Exactly which hard drive is it? Give us the specific model so we can look it up.
Windows cannot verify the digital signature for the drivers required for this device.
If you have restored the hard disk to its original out-of-the-box contents using Toshiba recovery media, that probably means you restored to a drive with the new advanced-format technology.
Try installing this driver.
Intel Rapid Storage Technology
More information in this thread.
After Restoring to New Hard Disk, No Windows Update - a Fix
Please let us know how it goes.
-Jerry

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

Can I load "Pages" onto new hard drive without having to pay for it again?

I have a 5 yr old Mac that just had it's hard drive replaced. I had paid for and loaded Pages onto the original hard drive. Wondering if there's any way to load Pages onto my new hard drive without having to pay for the program again. Thanks so much

If you originally installed Pages from a CD or DVD, reinstall it from there.
If you installed Pages from the Mac App Store, yes, from the Apple ID you purchased it with.
If you got Pages from the iTunes App Store, the Mac version of it is a separate purchase.
(67842)

Install OS X Lion on new hard drive without a physical copy/install disc

Similar Messages

Maybe you are looking for