Install OS X on MacBook with broken DVD drive

Hi,
I need to install OS X on a MacBook that has a broken DVD drive. How is best to so this? Install over FireWire? Use Remote Install? I have access to a working MacBook Pro.
Thanks,
James.

You can also install via USB key.
Method explained here:
http://discussions.info.apple.com/thread.jspa?threadID=2726610&tstart=0

Similar Messages

  • How can I install Vista on my mbp with broken dvd drive?

    Hi,
    my internal dvd drive in my macbookpro is broken and I need to install windows vista on my mbp for educational reasons.. Anybody can give me a hand? (i cant afford a new internal drive)
    Ive got a LG external DVD drive - i used it to install snow leopard but it doenst launch the vista dvd...
    lookin forward to ur help.
    Its an mbp late 2007 i think.. - lg drive is gsa-e10n
    Message was edited by: Sply

    you should be able to boot off a usb thumb drive. there are lots of resources on the web for doing this. i've also found a thread to enable you to decide which device to boot from, including the USB drive by holding down option while starting up...
    http://forums.macrumors.com/showthread.php?t=631901

  • Trying to re-install OSX on mac Mini with broken DVD drive.

    I have a mac mini G4 and the DVD drive died a long time ago and i have been using a external USB DVD when necessary. Last week the machine was taking along time to boot so I got hold of a FireWire 400 cable and connected it to my Intel iMac and tried to repair it in target disk mode. Disk Utilities was unable to repair the drive so I had to erase it and re-format which was completed successfully. Now I have the problem that I cannot get OS X Leopard or Tiger back on the mac mini from the install DVDs. I cannot get the mac mini to recognize the USB drive or the iMac as a bootable drive. (N.B. the DVD drive has also died on the Intel iMac). When booting the mac mini whilst hold the alt key, the correct screen loads but nothing appears but for the reload key and the continue key.
    Any help would be grateful as I want to keep the mac mini running for my daughter to use.
    May

    First off, you can't use an Intel Mac to boot a PowerPC Mac.
    Secondly, 10.6 won't work on G4s.
    Third, machines older than 4 years, may need a PRAM battery replaced for their optical drive to work again.
    If the PRAM battery is not the problem, then you may need to find a safe cleaner for the drive.
    USB DVD drives won't boot G4s either.  Only Firewire will.  See http://www.macsales.com/ for some drives that may help you.

  • Upgrading mac mini from tiger to leopard with broken DVD drive (long)

    bonjour.
    I have a macmini (1.42PPC) with a broken DVD drive running tiger on which i would like to install leopard (from scratch). I have a retail DVD of leopard, and a macbook. Other equipment includes a PSP and an 8Gb memory stick duo, usb cables, a 40Gb ipod with firewire cable. Wireless keyboard and mouse.
    I've created a bootable image of my leopard DVD onto the 8Gb memory stick in the PSP using the macbook. I can plug the PSP into the macbook and the memory stick mounts as the leopard install DVD. I run InstallOSX and i'm prompted to reboot. Upon rebooting, my macbook boots from the memory stick in the PSP attached via USB and the language option menu of the install process appears. So far so good. I shutdown the macbook.
    I then take my bootable image of my leopard DVD and plug it into the macmini. It automounts, i run InstallOSX and i'm prompted to reboot and the macmini restarts.
    Unfortunately, the macmini reboots from it's internal HDD, and not the memory stick attached via USB so the installation fails.
    Is there a way i can force the macmini to boot or reboot from the USB drive? I only have a wireless keyboard. Does the macmini in fact support booting from a USB device at all?
    I don't know much about the firmware shipped with the macmini, and can not access it during startup to take a look as i have a wireless keyboard. Can i access the firmware from the booted macmini to change the boot device, like i can with a Sun Solaris box (eeprom)
    Could there be another solution that wouldn't involve playing with the firmware?
    I don't have the option of buying additional equipement.
    Any thoughts on this problem would be welcome.
    best wishes
    jack
    ps. I added (long) to topic subject, not to phish, but to save others' time, as it's quite a long and boring post

    thanks for your advice, however this is all but impossible as i have a wireless keyboard which doesn't permit me boot into anything but the OS, as the keyboard and bluetooth drivers don't load early enough in the boot process.
    however, i did find a firewire cable, so this is what i did:
    booted the macmini in target mode and added a 10Gb partition to it from the macbook, onto which i restored the leopard DVD image
    booted the mac mini normally, and it mounted my new partition. I just ran the install from there et voila

  • How do I upgrade from OS 10.5.8 to OS 10.6 with broken dvd drive?

    Hi I have a MacBook from 2010 and I still have OS 10.5.8 on it but most applications won't work now (like I can't download a new itunes) because my OS is so outdated. I want to put the next OS on it but my DVD drive is broken. Is there a way I can get and install a new OS on it?

    In theory it is possible to use the DVD drive on another Mac.  The 2 Macs must be on the same local network, then you need to use a 3rd party control panel called "Secrets"
    https://www.macupdate.com/app/mac/27025/secrets>
    and then use Secrets to enable "Show Remote Disc" on the Mac that has a broken DVD drive.
    On the Mac that has a working DVD drive you use System Preferences -> Sharing to enable DVD sharing (if you do not have that option, it can be enabled via Secrets).

  • Snow Leopard as a virtual machine with broken DVD drive

    I upgraded to Lion from Snow Leopard.
    Additionally, i've got a broken DVD drive on my Macbook Pro and want to install Snow Leopard as a virtual machine.
    How do I do this?
    Regards

    Mac OS X Feedback
    <http://www.apple.com/feedback/macosx.html>
    And/Or
    BugReporter
    <http://bugreporter.apple.com>
    Free ADC (Apple Developer Connection) account needed for BugReporter.
    Anyone can get a free account at:
    <http://developer.apple.com/programs/register/>

  • How to install leopard on G5 with Broken DVD drive?

    The DVD drive on my Dual 2.7 GHz PowerPC G5 went bad. I have a MacBook Pro running Leopard with a good internal DVD drive. Can I put the leopard install disc in my MacBook Pro then put the Macbook Pro in Target Disc mode, connect it via firewire to my G5 and install Leopard on my G5 that way?

    Most Macs equipped with Firewire 400 or 800 are capable of booting into Target Disk Mode (toggle under Sys Prefs-> Startup disk OR hold T when starting the computer).
    When plugging a target disk mode running mac into another mac via firewire, the mac's drives (all hard drives and all optical drives - if media is inserted) will show up on the recipient mac. Therefore, use the good computer with good optical drive to put the disc media in, then start it in target disk mode. Finally plug it into the G5 with firewire cable (prefer 800 if your MBP has that). You will then see the drives and DVD, you can even restart the G5 holding down 'C' and it will boot from the CD drive of the other mac (it will try its own first - if available).

  • Install snow leopard on mac mini with broken DVD Drive

    I want to upgrade the OS on my mac mini but the hard drive keeps kicking out the disk - I read that I "might" be able to fix this by using a DVD cleaner but I am not overly optimistic about this fix. I have an external USB drive and a Windows PC to work with so I am wondering if I can use the DVD drive of the PC to copy the install disks to the external drive and then perform the instal from the external drive. I have been reading posts and can find advice on how to copy the Leopard install discs using another Mac or by using the remote disk feature - but since I don't have another Mac, these are not currently options.
    Thanks

    1. Clean your drive and reset the > PRAM, then try upgrading with the Mac Mini's drive.
    2. Try out that external USB DVD drive, some will work if they are not OS X compatible.
    3. Your PC might work, see > DVD or CD sharing: Using Remote Disc

  • HDD crashed! How to install Tiger onto 867mhz G4 with no DVD drive??

    Hi folks.
    My trusty 867mhz G4 Quicksilver Powermac drive has finally konked out. It was running OS 9.2.2 before. Now I want to install Tiger as the OS.
    Having only a CD drive (nope, can't read or write DVD's), how do I proceed to install Tiger (I have the original install disk) onto the brand new blank hard drive?
    Possible tools that I have:
    1) last generation 1.67mhz G4 powerbook
    2) dual 2.5ghz G5 powermac
    3) Lacie external firewire DVD drive
    Things I have tried:
    1) hold down "c" while starting up the Quicksilver with the Lacie DVD drive hooked up to it, hoping I can start up from the optical drive, which contains the Tiger install disk. Result: blank white screen that goes nowhere. Found out that the Lacie needs at least 10.3.9 to run.
    I'm out of ideas.
    Can someone tell me the right way to do this?

    Thanks guys.
    Didn't sleep at all last night, BUT, I did it!
    1) Set the Quicksilver as a firewire target disk hooked up to my G4 1.67GHZ Powerbook. Result = frozen blue screen.
    3) Set the Quicksilver as a firewire target disk hooked up to my dual 2.5GHZ G5 Power Mac. Result = frozen blue screen
    So that got me thinking, the common thing about the Powerbook and Power Mac is that they both run Leopard. It makes sense to me that computers that already have Leopard installed will probably not run a Tiger installer.
    So, I whip out the oldest and slowest computer I have, which is an old 550MHZ Titanium Powerbook, complete with 1 broken hinge, flickering screen and peeled paint. It runs Tiger. I set the Quicksilver as a firewire target disk hooked up to the Titanium Powerbook.
    Voila! It works like a charm!
    So for anyone facing the same problem, one of the possibilities is: you can do it with the computer set as a firewire target disk hooked up to another computer running nothing newer than Tiger.
    Thanks again for your help guys!

  • Install photoshop elements on MacBook with no disc drive

    I purchased photoshop elements from a store.  My Macbook doesn't have a dvd drive to install the program.  How do I install from the internet?

    Download, install, and activate with your serial number...
    PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

  • Installing Elements on a laptop with no DVD drive

    I have been given Elements 11 on DVD but the new laptop it is destined for has no DVD drive. How can I install it?

    Note that the user in the topic linked to by Michel failed to get PSE11. He encountered an authorization error which is typical of NOT following the 'Very Important Instructions' step by step (authorization errors typically because of not following steps 0 and/or 2). They do work but you must read and follow the instructions properly - every step.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Installing Windows 7 on Parallels with external DVD Drive

    Hi. I have a Mac Mini, and just finished installing Parallels 8. I am now trying to install Windows 7, but they system is not recognizing my external DVD drive. I get a message telling me to install from an image file? Not sure what that means. Help! Thx.

    I am doing this after doing a full wipe of my hard drive and reinstalling lion.
    Previously, I had lion, and made a partition using disk utility and booted from the disk (this time it was from my Mac's SuperDrive which was functioning perfectly at this point in time) and finished the installation completely fine. I then used the drivers that were in my Snow Leopard DVD (I have a Snow Leopard DVD from a previous Mac I purchased).
    The only difference between then and now is that I am using an external DVD drive.

  • Why apple?? cant install Windows on My Macbook with broken descrete graphic card

    hi
    i have a mc723.early 2011 macbook pro with ATI radeon 6750 vga
    it seems that its broken,becuase when im on heavy load or launching a game,screen goes white
    apple doesnt support IRAN and there is no apple store to fix this for me
    i want to install windows but becuase graphic switching doesnt work on windows,installing process uses discrete graphic and it hangss and screens goes white
    why apple??
    any solution guys??
    im using GFX.IO to force use intel HD to stop this

    its up to you which version of windows do you want to use.
    just to tell you that there is a update to your version of bootcamp here Boot Camp Support Software 4.0.4033   to enable it to install windows 7
    your video card may be able to play those game at a low setting

  • Installing Snow Leopard on MacBook Pro if DVD drive doesn't work

    My superdrive is very finicky, and I don't want to risk an install with it if it decides to kick the DVD out halfway through the install. Can I connect to my iMac and install VIA firewire? I tried this today but the install seemed to stall and wouldn't progress. I had to do a hard restart which I know neither machine liked very much. Ideas? Advice?

    You can connect them via Firewire cable. Both machines must be Intel models. Boot the MBP into Target Disk Mode. Boot the iMac from the OS X Installer DVD:
    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.
    Proceed to the screen where you select the destination drive. Select your MBP's disk drive then click on the Option button. Select the Erase and Install option then click on the OK button. Complete your installation.
    When finished Eject the MBP's disk drive from the iMac. Shut down the MBP and remove the Firewire cable.

  • How to erase macbook with broken cd drive?

    i need to completely wipe my wife's MacBook computer but the CD drive does not work. and can't read the install disk. Can anyone point me to some simple steps that will ensure it can be completely erased? Thanks!

    macjack wrote:
    Hey, I didn't even mention the sudo rm you don't care for
    That will trash the directory but leave the data on the disk. You want the dd command.
    It would be something along these lines.
    rm everything on the directory then do.
    mac $ dd if=/dev/zero  bs=1024 count=1kx1k of=/Volumes/MacOSFirewire/zero
    1048576+0 records in
    1048576+0 records out
    1073741824 bytes transferred in 77.977957 secs (13769812 bytes/sec)
    Note this command isn't harmful in itself. It creates the file zero.
    Delete the file zero.
    *How zero a partition*
    boot in single user mode.
    #It is best to do the pdisk command before you eject the external hard drive. Now, eject the external hard drive. Do another pdisk command to see what drive name has disappeared. The disappearing name is the name of your external hard drive.
    pdisk -l
    unmount the partition
    use dd to zero the partition.
    Robert

Maybe you are looking for