Install OSX on Macbook Pro 2009

Hello,
I just bought a used Macbook Pro 17 inch form early 2009. There is Windows 8 installed, but I would like to install the OSX again.
If I start with command + r the book is still starting in Windows8.
I have a iMac from 2007 with Maverick running, and a old Macbook with 10.7.
What is the best way to recover a version of OS X
Thanks a lot.

The whole point of the retail version of the OS DVDs was that anyone who's system was capable of running that OS could buy the DVD. They were universal.
As I wrote if it were me I'd want the security of having the DVD. Of course the ideal solution would be to get the original DVD from the seller who was legally required to furnish them.
In any case the OP should do a reformat and clean install of whatever OS is used, especially if it is the clone. I would not want to run off of a clone from a different system in this case, to many unknowns.
As for the legal question I've found discussing that here on ASC is a thankless task which leads no where. Apple is a big company if they have issues with the legality of anything they can look into it. I got no dog in that hunt.
regards

Similar Messages

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

How to remote install osx on MacBook Pro, how to remote install OSX on MacBook Pro

I recently used an application called monolingual on my MacBook Pro and it seems that I have completely erased all apple input files that allow OSX to use the built-in alphabetical keys. I can still type using my iPhone through an application called TeamViewer.
Any help is greatly appreciated!

Re-install the OS from the original DVD supplied, boot holding down c to force the disc start up.

Problems re-installing OSX on macbook pro

Hi,
My macbook pro (2010 Snow leopard) has been freezing quite a lot and last night froze for 3 hours so I've been trying to re-boot unsuccessfully (majority of times). I've spoke to Apple and they have suggested using the OSX disk that came with the mac to repair utilities but for some stupid reason I'm trying to re-install OSX again and so far it has taken almost 2 hours. It has gone through the first install with the blue progress bar and now the time remaining keeps increasing. I'm afraid to quit it incase I do any damage.
Can I get out of it or should I just let it runs it's course?
Please help!!
thanks

The options under apple menu were greyed out so I'm in the process of restarting, I'll see if it will start up in safe mode or try the disk utilities instead of installing the OSX. My main concern was how long it was taking to install and also would it wipe my hard drive once it had installed.
Once again thank you for you patience and help, I'm sure I'll be back if I can't get it going. I have booked an appointment in the Apple store next week because the machine hasn't been running very well for a while now.

OSX Lion cannot be installed on used macbook pro

Dear all,
I inherited an old used macbook pro (2009 model) from a colleague. He cleaned it and it was ready to reinstall when I received it. I purchased a new OSX Lion set to install. As the macbook is a present for my daughters birthday, I purchased the software on het apple ID.
When installing (after entering the related apple ID) I get the following message:
This product is currently not available. Try again later.
Can I solve this without having to go to an Apple dealer. My girls birthday is this Friday, and I'd like to have the macbook ready before that date.
Thanks!

In order to install Lion (which all 2009 MBPs are capable of) you need to have Snow leopard (10.6.8) installed first. The simplest path is to order this disk from Apple:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Then download the combo update:
http://support.apple.com/kb/DL1399
Then the MBP will be ready for a Lion install.
Ciao.

Can I install only Windows on my Macbook Pro 2009?

Hello All,
For reasons far outwith my control. i.e. I am in the middle of borneo, needing desperatly to get on a full windows machine... I need answers to the following?
I have full gen versions of Windows 7 and MS Office 2010. I want to run these on my 13" MacBook Pro 2009. I know, boot camp, VMware etc are all great. But i can't at this time get those working.
I think, the best option is to just buy a HDD, remove the old one, install fresh copy (of win) onto new HHD.
However, my question is - will this work?
Thanks
Craig

As TheSmokeMonster indicated, you'll need to use either virtualization or BootCamp. BootCamp prepares your system to allow Windows to be installable on it (it also provides the drives for some of the hardware which may not be found elsewhere). Virtualization runs in OS X, so that should be a non-issue. Keep in mind, all firmware updates are only via OS X, so you would not be able to update your firmware unless you have a functioning bootable external OS X volume.
BootCamp does basically give you a full Windows machine... it just allows dual booting between Windows and OS X.

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

MacBook Pro 2009 new hard drive install results in very slow function and freezing

I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
Short version:
I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
Long version:
Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
http://scsc-online.com/Scannerz.html
I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

Hi, I am using macbook pro 2009 model.In that, there is wifi hardware is not installed. I am not able to use wireless networks. Anybody can help me out.

Hello,
I am using Macbook pro 2009 model. In that, when I tried to connect wireless network and wifi. I am not able to do. I have done R & D regarding this issue. Some them advice to do some below steps.
Restart your Mac.
upon start-up, hold down the Opt key until you see your drives.
click on the recovery drive (note: this will not affect or delete any files you currently have).
login if needed.
in the top right hand corner you will see the Wi-Fi icon (hopefully). Click the icon and then click "turn wifi Off" and then again click "turn wifi ON"
restart your Mac again and start it up normally.
recover from your near-heart attack.
I've followed your 1 to 4 steps & then after clicking on the wifi icon, I found Wi-Fi: No hardware installed just beneath the icon. That means no Wifi hardware is installed in this machine. Do you have any suggestion about installing it? I mean how can I get that hardware? Is it available on internet? Thanks a lot again.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

HT1338 Have a macbook pro 2009 currently at version 10.5.8 need to install new version for i phone 5 but will not let me until I install MAC OS X Version 10.6 cant find this anywhere! Any ideas thanks

Have a macbook pro 2009 currently at version 10.5.8 need to install new version for i phone 5 but will not let me until I install MAC OS X Version 10.6 cant find this anywhere! Any ideas thanks

Click here.
(75139)

HT201364 MacBook Pro 2009 will not down OS X Mavericks -cannot be installed on this computer

I have an MacBook Pro 2009 running 10.6.8 with 3 GB memory and plenty of disk space.
So why the error message:
OS X Mavericks cannot be installed on this computer??

Lanny,
The model identifier is as follows:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.33 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
So it seems that this maybe a late 2007 model. Does exclude this model from an OS upgrade?
Thanks.

If i dont have original install disks for my macbook pro 2009 can i create one?

if i dont have original install disks for my macbook pro 2009 can i create one?

No, but you might be able to purchase replacements:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

How do i updates itunes on a macbook pro 2009 10.5.8 to newer 10.6.8

Hey guys i hope someone can help me. I recenlty brought an older model macbook pro 2009 with itunes 10.5.8 on it. for a great low price of $ 300 dollars. How ever i cant update a newer version of itunes to replace the 10.5.8. So everytime I plug my new ipad into the older mac it says i need itunes 10.6.8 or higher. how do i update to a newer version for free???? youtube was not helpful or goole. So I am stuck.

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.

I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?

I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?

That disk from her computer is a machine specific version, you need this disk
http://store.apple.com/us/product/MC573Z/A
and follow these instructions
How to erase and install Snow Leopard 10.6

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Install OSX on Macbook Pro 2009

Similar Messages

Maybe you are looking for