Install PE10 on Disk 1 only

I purchased PE10 on disk. The box contains 3 disks. At the main menu I indicated I only wanted to install PE10.
I inserted Disk 1 in my DVD drive. After running for a time a screen appeared prompting installation of Disk 2. At this point my PC froze.
I removed Disk 1. I Uninstalled the program per Adobe instructions and rebooted my PC. I inserted Disk 1 again.
This time at the completion a screen appeared indicating PE10 had been successfully installed. Is PE10 installed using only Disk 1?
If yes, what do Disks 2 and 3 contain? If no, what do I need to do to get a proper installation of PE10 only?

Yes you only need disk 1.
Disk 2 is for the trial of Premier Elements and disk 3 is for the Mac OSX installation.

Similar Messages

Can't do factory restore & only disks that keep ejecting are the osx install and apps disks

First of all let me say, this is my first Apple computer and I'm not experienced in forums. Please do not read rudeness into what is actually frustration at searching forever for a solution and trying not to wish I had been talked into an Apple. With that said....
I've had my iMac for about a year and a half. We had lost our internet and were using a hotspot for awhile so we could look for another provider and get online if we needed to. One day I signed on and, we didn't have an isp mind you, but the browser opened up to the dominant isp in this area saying a virus was detected coming from this iMac address? I thought that was strange and panicked so decided to do what I would on a pc, just restore the whole thing to factory settings. Everything was going smooth, (my updates were at 10.6.8 at the time)... when I restored I was back at 10.6.2. (osx disk) I was doing systems updates and one apparently hung.... when told to restart, I did... but the computer would never boot back up. It would turn on.... go to gray screen... then blue screen... then shut off. I couldn't boot in safe mode, pram reset did nothing, smc reset did nothing, couldn't hold 'd' to get to diagnostics, couldn't boot to recovery... it kept spitting out disks after trying to read them... with all those solutions I found online and nothing helping I had to call Apple... they couldn't help over the phone because Apple Care expired, unless I purchased help... this frustrated me because every where I found my problem and a different solution their Apple Care had expired too.... so had to set an appt at an Apple store.
So took it in to Apple, just got it back yesterday. I let them know I was restoring to factory settings so wasn't worried about losing anything. When I picked it up, I was told no charge... it was a software issue they saw where it hung and fixed it. I tried to ask questions about the 'software repair' but they didn't seem to want to answer my questions. It just says 'software repair' on my order. So I asked 'okay, so it's back to factory settings like when I bought it?' I was told yes and I said great that was my goal anyway. I get home and it's NOT like when I first purchased it or like a factory restore. Everything I was doing before it crashed is on there. So I'm back to trying to do a factory restore. But for some reason now, it seems the only disks that keep self ejecting are the osx install and application disks. I still can't do a boot recovery, AHT, or 'c' boot... since the apple disks eject I can't use start up to get to them.
I find it odd that both the oxc install disk and applications disk would be damaged at the same time when they both previously worked. I called the Apple Store where I took it to talk to the geniuses that worked on it because I had a question about the repair they did....
Apple: I'm sorry we don't offer tech support
Me: I understand but I had a question about the repair done from there the other day
Apple: We are just a store and can't answer tech questions
Me: I understand and get that but since I took my mac to your store to be worked on I thought I could ask the person that worked on it a question about the 'software repair' and meaning and what software was repaired
Apple: No you will have to set another apt to bring your computer in if you are still having problems
Me: UGHHHHHH (pulling hair out)
So (a little late huh?) to make a long story short giving what I stated above:
Why is it, only the osx install and application disks not working now? They worked before taking it to Apple
What can I do at this point?
Can you do a factory restore without disks on a Mac?
If by chance both disk did for some reason go out, how do I get them replaced?
If I gave TMI without enough important info let me know.
My OS X install disk says version 10.6.2 on it
About this Mac currently says Mac OS X version 10.6.8
Batteries died on keyboard and mouse so am using usb wired keyboard and mouse
At some point I had used bootcamp and then later found parallels so I could install a Corel product and keep using... could some windows files be messing something up in there somewhere?
It used to say Mac OS X Version 10.6.8 and I could have sworn I saw it said 'snow leopard' in there somewhere, now I can't even find that word in search on the computer. Long post I know but trying to set what was going on at the time I took it in.
I'm not sure what else needs to be added to get this to the correct thread or help. As I stated my goal is to have it like I just pulled it out of the box for the first time so no solution will scare me off about loss of data.
Thanks for any help.

Wow, sorry to hear of your experience. Seems strange that your disk would just eject like they did. It could be a lot of things but more than likely you just kind of have to start all over.
What I would do is insert your system disk and instead of going immediately to an install I would go to disk utility and erase the drive. That will erase everything on the disk and give you a new blank disk to start with. After that I would try to reinstall the system. Assuming that goes well then you should be restored to where it was when you purchased it. After that you can reinstall all your applications or personal files. I hope you have good backups.
I remember one time I was having a similar problem and don't ask my why I did it but I actually could not get it to install a system. I removed both of my ram sticks, shut the computer down for about 10 minutes including unplugging it from the wall plug, then reinstalled the ram, plugged it back in and started up from the system disk and all worked just fine. To this day I have no idea if pulling the ram helped but I have never had to do it since and for some dumb reason that solved the problem I was having, which is the same problem you are having now. Call it voodoo but it worked.
Good Luck!!
Message was edited by: Al Van Malsen

"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error

Hey Im getting the following error when trying to install windows from a USB.
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
I installed the windows 8 (64bit) iso using boot camp to a usb. I was able to do this after changing the info.plist to allow me to place the iso on the usb. After I make the partition and start the install, I get the above error. I formatted the partition in the installation but I keep getting this error. I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on. If you can help me that would be greatly appreciated

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks

Hi All,
I have been trying real hard to install Windows 8 on my Macbook Pro early 2011 model. I followed the instruction given by Bootcamp word to word, all things went very smoothly untill I was asked Windows Setup Instaled to selct the Hard drive. Here's the error:
"Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks...."
Let me know guys what should I do?
Thanks,
Attiqe

You have started the Windows 8 installer in EFI mode, and you don't have to start in EFI mode on a Mac because your Mac emulates a BIOS and a MBR partition table in order to install Windows in non-EFI mode.
To start the Windows installer, hold the Option (Alt) key while your computer is starting and have a look at all the boot options you have. You should see two with a DVD above and they must be named "Windows" and "EFI Boot". Choose the option with "Windows" and follow the steps to install Windows. Note that you have to format the "BOOTCAMP" partition from the installer to be able to install Windows.
If you are trying to install Windows from a USB drive, note that your computer isn't compatible to do it

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x.

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!

you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/

When installing mountain lion on my computer, why does it say "OSX Mountain Lion couldn't be installed, because the disk \ is damaged and can't be repaired."

I'm unable install mountain lion on my computer. Every time it says "OSX Mountain Lion couldn't be installed, because the disk \ is damaged and can't be repaired. Click restart to restart your computer and try installing again." So I press the only button listed as an option, it restarts, and the same screen comes up again. I can't make mountain lion go away...I've tried many times. What is wrong with my computer? It's stuck like this and I can't even get snow leopard back on there if I wanted to because I can't get away from the same screen. Please help : (

Insert your OS installer disk in the optical drive. Power the Mac down by holding down the power button. Then power back up and hold down the 'c' key so the MBP boots to the installer disk. From Disk Utility you should do a Repair Disk. If DU successfully repairs the disk quit the installer and reboot your Mac. You should update to 10.6.8 prior to upgrading to ML.
http://support.apple.com/kb/DL1399
Then do your ML upgrade install.

No more optical drive and windows 8 issue: "Windows cannot be installed on this disk as it has an MBR partition table."

I have an Early 2011 13" MBP going strong with an SSD and original HDD installed in the optical drive. However, having had success with windows 7 on my old HDD I was planning to install Windows 8.1 (from .iso) on my SSD. However, for the past day or so it's been a nightmare.
I tried the official procedure but by editing the bootcamp info.plist so I could boot from USB (you can't install windows from an external optical drive apparently) partitioning as bootcamp wanted too.
I then tried it a number of different ways using disk utility etc and with an empty space
However, I always seem to end up with the error "“Windows cannot be installed on this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only installed on GPT disks“
I read some interesting stuff here http://www.royhochstenbach.com/installing-windows-8-1-on-a-2013-mac-pro/
He points out that
"Windows 7 and 8 in x64 support EFI. Normally if you install Windows on a Mac and use the installation DVD, it boots into regular BIOS mode, thus can be installed on an MBR partition. I tried the same, but since the Mac Pro doesn’t have an optical drive I had to use an external drive. And apparently the Mac boots external optical drives in EFI mode too. The Bootcamp wizard is aware of this, and creates a GPT partition on a non-superdrive Mac but an MBR partition on a superdrive Mac."
This means Bootcamp is essentially making the wrong type of partition?
My real question is? How do I install it windows 8? I'm really on my last legs!
I really don't want to have to open this thing up and reinsert my optical drive as its really really difficult to get out of the enclosure (would probably have to break it).
A huge thanks in advance!

Hi,
Have you tried that suggestion?
You also could use this commands to check and install again:
Inside windows installer, hit Shift+F10 to get a command prompt, then run diskpart and type List disk to displays a list of disks and information about them, such as their size, amount of available free space, whether the disk is a basic or dynamic disk,
and whether the disk uses the master boot record (MBR) or GUID partition table (GPT) partition style.
and then select the target disk. Zap the drive (with the clean command), create GPT table (new gpt), create the GPT-EFI special partitions.
Step-by-step instructions is here for reference:
HOW TO: Use the Diskpart.efi Utility to Create a GUID Partition Table Partition on a Raw Disk in Windows
http://support.microsoft.com/kb/297800?wa=wsignin1.0
Then reboot so the firmware finds those partitions and adds the disk to the EFI-native boot order (Windows installer checks this).
Karen Hu
TechNet Community Support

Cant install software from disk. Terminal window opens with a logon and bash message?

I cannot install software from disk & in some cases download.
If any software disk is inserted the terminal window appears.
The Disk has to be clicked to open the contents but install files or package files show as a blank doc and not the usual yellow package icon.
All that shows is a log on message in the terminal window, but nothing about install.
I thought Drive issues but the drive plays audio and DVD perfect
I cannot install:-
Office for mac updates
Live Interior 3D (managed to install from download)
ION Audio Converter
This has only come to my attention in the last couple of weeks.
The machine is a late 2011 with Lion installed

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Nope. It just opened the installer and stayed in the same loop.
It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
Eveything was working fine until the mountain lion failed install.

Windows cannot be installed to this disk... but HDD works

Hi All, I have an issue with the internal SATA HDD in my Pavilion dm4t laptop (PR #: XQ1313AAR). The drive is working, when connecting via external USB enclosure is recognized by the PC, can read/write data, format partitions etc… When plugged in as internal HDD of the laptop, BIOS does not recognize it. When booting from Windows Installation Disk, the drive (and its partitions) are recognized, but I get the following message when trying to select a partition to proceed with Windows install: Windows cannot be installed to this disk. This computer’s hardware may not support booting to this disk. Ensure that the disk’s controller is enabled in the computer’s BIOS menu. Used external USB enclosure again, connected to a working PC and using TestDisk, I deleted the partition table (by zero writing it several times), then created a new MBR. When connecting back as internal drive, it is now recognized by BIOS and in the Windows installation screen, I can actually select a partition on the drive to install Windows on; the installation actually runs, but as soon as I get to the point of having to restart the PC during the installation process, upon restart the drive is not recognized anymore… When I remove it, and repeat the same steps with TestDisk, it once again works, can start Windows installation, but it fails upon restart. I have already read numerous forums on the topic, have tried various drive utilities. I also saw in one of the forums a suggestion to enable AHCI for the SATA controller, but the laptop BIOS is extremely limited and does not have that option.Please help!!! Have been without a working laptop for several weeks and is driving me crazy. Saving any data on the drive is not needed – I have recovered all data from it that I need. So my only objective is to restore the harddrive to fully working state and be able to install OS on it (Windows 7, 64-bit)! Thanks in advance for any help!

I've tried many things already, spend countless hours on this and still no luck What seems to get me at least a step closer:- Boot using Windows 7 Install DVD-Go to Repair Computer and open Command Prompt-Run DiskPart, Clean the disk-After restart am able to create partitions on the disk through Windows 7 Installation and install Windows-As a last step of Windows install, it reboots the system, and upon reboot drive is not recognized - goes again into booting from DVD and starting Windows installation from scratch... When following the installation steps, this time it does not allow to go through with the installation stating that "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu." When in diskpart and using Detail Disk command, I see that disk is NOT bootable. Could that be causing the issue and how can it be solved?

Install windows 8.1 in only one partition ( GPT )

Is possible to install windows 8.1 in only one partition (GPT ) ( There are at least three in a default installation ).
Thank you !

Its simple, I am listing steps below, feel free to ask for clarification if you need assistance.
1. boot into winpe and clean the disk if it has some other partition. (boot from media and then at wekcome prompt press shift F10)
2. open diskpart.
3 select the disk and create partition for EFI. (create partition efi size=350)
4 format this partition with FAT32, (format fs=FAT32 quick)
5. create second partition with NTFS, (create partition primary and then format it with NTFS file system assign it letter c:)
6. In windows DVD, locate install.wim, it should be by default under x:\sources\
7. Apply the wim file on the image,
Dism /apply-image /imagefile:x:\sources\install.wim /index:1 /ApplyDir:C:\
8. Run the command to copy the boot files to this new EFI partition.
bcdboot c:\windows
boot up!
regards
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.

Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table. On EFI Systems, Windows Can Only Be Installed to GPT.
I found one solution to this problem on hp forum but my laptop has boot legacy and does not disable the efi boot order.
HP Model# HP 1000-1140TU Notebook PC
Serial# 5cg2481dbg
Product# c8c94pa#uuf
This is solution which is found on hp forum
SolutionThe resolution to this issue depends on the the hard disk volume size:
Follow these steps if the hard disk volume size is less than 2.19 TB:
Temporarily disable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
Select File > Save Changes > Exit .
Install the Windows operating system.
Enable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
Select File > Save Changes > Exit .
Follow these steps if the hard disk volume size is greater than 2.19 TB:
Install the HP BIOS Update UEFI utility from the HP Web site:
Click here to access the document "HP BIOS Update UEFI" .
NOTE:The HP BIOS Update UEFI utility is installed by default on some HP computers.
Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition.
Click here to access the document "How to Configure UEFI/GPT-Based Hard Drive Partitions" .
NOTEne or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside the HP Web site.

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Java for OS X 2013-005 can't be installed on this disk. An error has occurred while evaluating javascript

I have a Mac Mini OS X 10.8.5. Try to do the Java update and got this message: Java for OS X 2013-005 can't be installed on this disk. An error has occurred while evaluating javascript for the package. I can't find a fix or a solution. How can I fix this? Any help would be appreciated

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Logic 9 can't be installed on external disk not running OS X - huh?

Would really appreciate some help...
Did a basic install of Logic Pro 9 on my MacBook but didn't install additional content as my MacBook doesn't have sufficient space and I just wanted to get started.
Now I have tried to install the additional content (loops etc.) on my Time Capsule (which isn't even recognised) or my external drive (connected via USB).
When I try the latter I get the following message...
"Logic Studio can't be installed on this disk. You can only install this software on the disk that is running Mac OS X" ????
I didn't realise external drives ran OSX? My MacBook doesn't have space for all of the content.
Please help me install this additional content to either my Time Capsule or external drive
Many thanks!!

bill borez wrote:
Yep, the additional content will only install on your system disk unfortunately.
Not quite true. The additional content cannot be directly installed on USB-disks connected to a Macbook, to be precise.
What you could do is free up enough space on your system disk, by (temporarily) moving stuff to your USB disk, then install the content on your startup disk, and then move the content to the USB disk. Here's how to:
EXS content:
1. Copy (drag) the folders inside /Library/Application Support/Logic/EXS Factory Samples/ and in /Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/ to an appropriate place (folder) on your external drive (this may take anywhere from two to fifteen minutes, depending on your system and number of EXS- and Garageband Instruments);
2. Delete the originals;
3. Open Logic, load EXS, click on its display window until the instrument menu drops down; choose 'refresh overview' if necessary. Done.
*Be aware that this works for Logic, but if you also use Garageband, the /Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/ folder should remain on the boot drive.
If you use Garageband Instruments in Logic, note that you can also load those in the EXS24.
Loops:
Establish where your loops are, then move them anywhere you like. After the move you have to reindex the loop browser, so Logic 'knows' where to find the files.
First delete the index files from the accompanying *Apple Loops Index* folders (they're text files).
these are the default Apple Loops locations:
YourHD/Library/Audio
YourHD/Users/'you'/Library/Audio
YourHD/Library/Application Support/Logic
YourHD/Library/Application Support/Garageband
To reindex now drag'n drop your folders containing the loops, from the Finder >onto Logics' Loop Browser. Note: Every individual folder you drop on the Loop >Browser will get an entry in the 'Show' dropdown menu in the Loop Browser.
The reindexing can take 0.5 to 20 minutes, depending on the number of loops and >the power of your Mac.
regards, Erik.

TS1600 OS X could not be installed on your computer. OSX can't be installed on the disk Macintosh HD because a recovery system can't be created.

I just bought the new OS X 10.8 and downloaded but when I tried to install it on my computer Installation Failed and I got this message:
"OS X can't be installed on the disk Macintosh HD , because a recovery system can't be created."
I tried so many times but the same message comes out to me each time and when I restart the computer I am back to the same OS X installer and can't access my computer any more so I am really stuck I can't install the new OS X version and can't go back to the old OS X version or access my computer.
Please help
My computer is MacBook Pro 13"

OK. You have a Boot Camp partition which is why the issue. See the following:
It seems the issue is that the space at the "bottom" of your available space when Lion installs it's partition is already occupied by BootCamp. The fix was to go into Disk Utility; Select your Hard Drive; Select Partition; Move the bottom of your main partition "up" a bit to create a space for Lion; close Disk Utility; Install Lion; once Lion is successfully installed, go back into Disk Partition and drag the bottom of your main partition back "down" to the bottom of the window.
In your case use Disk Utility to "shrink" your OS X partition a little more than 1 GB.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired empty space. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.
Remember that you only need to shrink the OS X partition a little more than 1 GB. Now, when you try the Mountain Lion installation the installer will be able to make the Recovery HD.

Install PE10 on Disk 1 only

Similar Messages

Maybe you are looking for