Install PIXMA MG5320 on my second computor with windows 8 software/ .printer drive already in use.

I installed the printer on my wifes computor without and issues. Now I am attempting to install it on my computor. I am getting blocked in the installation point where you select all the software needed . when i hit ok it goes into the install mode but a window pops up saying printer driver is already in use. I never had a printer associated with this computor ...thisis the first. what do I do?

Hey addonag!
The reason this is occurring is because the driver bundled with Windows 8 is already installed on your computer. This happened automatically when the printer was connected to your computer through a USB cable. The installation does not overwrite this. All you need to do is uninstall the bundled driver and then this will install correctly. Please perform the following to do this:
1. On your keyboard, hold the windows key and press " X ".
2. Click Control Panel.
3. Select Devices and Printers. The Devices and Printers window opens.
4. Right click the PIXMA MG5320, then click Remove or Delete.
5. Confirm deletion.
6. Disconnect the USB cable if connected.
7. Reinstall with the disc that came with the printer.
I hope this helps.

Similar Messages

TS1363 I have a new computor with windows 8 and have installed I Tunes but it will not reconise my old I Pods, as I don't want to lose these tunes what can I do?

I have a new computor with Windows 8 and an old nano I Pod, I Tune does not reconise this, what can I do without losing all my music?

How to use your iPod to move your music to a new computer
iPod appears in Windows but not in iTunes

How to make my pixma ip 90 to work wireless with windows 7/64

how to make my pixma ip 90 to work wireless with windows 7/64 i installed the bu-10 it is authorized but can't make it to print wireless.

Hi again manny2249,
If the Bluetooth Settings feature does not appear on the Canon iP90 Setup Utility screen, the Bluetooth unit may not be installed correctly. We recommend contacting us via one of the support methods listed at the Contact Us link below for assistance with setting up the printer via Bluetooth.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

I had an early version of photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older photoshop?

I had an early version of Photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the Photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older Photoshop?

I think you mean Photoshop CS2. Photoshop 2 is from around 1992. The old Adobe activation servers were taken down. CS2 is about a decade old Adobe made a new download for old customers that legal customers can download and install. Download Acrobat 7 and CS2 products

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck

How can I install my Adobe Photoshop on my computer with Windows XP Service Pack 3?

How can I install my Adobe Photoshop on my computer with Windows XP Service Pack 3? Seriously frustrated. I put the disc in the drive and nothing happens. I open up add/remove programs and I get an error message stating it can't find a disc. I chatted with Adobe support, and they decided to send me here. Probably because they knew I wanted to spend all day online trying to figure this out.

Download from Adobe's website, install then enter your serial number.
Download and Installation Help

My Pixma MG5220 seems to "process" unendingly with the initial print command each time I use it.

My Pixma MG5220 seems to "process" unendingly with the initial print command each time I use it. May be autocleaning, but it extends time necessary to print, and I suspect it is wasting ink. Can anything be done to shorten the "Processing" cycle or limit the number of times it occurs?

Hi excomm,
The PIXMA MG5220 and all of our Canon printers are setup to automatically perform a cleaning when it has been a certain amount of time since the last cleaning was performed. This is done automatically by the printer and is hard wired into the printer system. Unfortunately, this cannot be changed.
I hope this answers your question.

How can I replace my old print driver with my new printer driver on 13

how can I replace my old print driver with my new print driver on photo elements 13

The print driver is not installed in PSE.
Check with the manufacturer of your printer.

Has anyone figured a way to use the Magic Trackpad with Windows 7 on a partitioned disc using Bootcamp?

Has anyone figured a way to use the magic trackpad with Windows 7 on a partitioned disc using Bootcamp?

Yes. After Windows/Bootcamp discovers your bluetooth device (Magic Trackpad or Mouse, be sure to make it discoverable), right click, with your wired mouse, of course, on the icon and select Properties.
Then check the mouse drivers box and your device should work. (I located this solution on another thread)
It works for both the Magic Mouse and Magic Trackpad.
Must admit, the solution was not intuitive within the Windows environment. But we all must remember. It IS Windows, after all.
Another thing. Keep in mind that the gestures on these devices that work just dandy in OSX do not carry over into Windows.
It's Windows.

Time machine won't backup on second mac because it says sparsebundle is already in use?

time machine won't backup on second mac because it says sparsebundle is already in use. What is the fix?

Make sure that the first Mac is not backing up at the time....then....
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Try a backup again from the second Mac in a few minutes
Post on your results

How to convert an ipod with Windows software installed to Mac operation

I have a 20MB ipod which has windows software on it. It is very hard to load songs onto as I can only see the ICON on the desktop and not in itunes and this way they don't seem to properly mount! I have a 12" ibook that I connect it to. I can't seem to follow how one is supposed to wipe the Windows OS (or whatever) off the ipod and install the Mac one ?!?!? Am I trying to do the impossible? A step-by-step answer would be soooooo appreciated.
12" ibook Mac OS X (10.4.2)

Information on the iPod not appearing in iTunes is available in this article. To reformat the iPod for Mac, open a new Finder window and click the Applications icon in the sidebar; from here, open Utilities and then iPod Software Updater. Locate the most recent version of the iPod updater inside, open it, and click the Restore button with the iPod connected. Doing this will change the iPod into the Mac format and erase everything currently on it.
(10717)

How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

Sorry my bad english..
See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

I need help installing iTunes on my new Dell Inspiron with Windows 7.

When I attempt to install iTunes (downloading from the iTunes website) on my new Dell Inspiron with Windows 7, I get the following error message, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
Please help. Thank you.

Have you tried to install other programmes on the same PC? If they have worked, your installer should be in working order, so redownload iTunes and try again

Install PIXMA MG5320 on my second computor with windows 8 software/ .printer drive already in use.

Similar Messages

Maybe you are looking for