Install plugin for Apache2 for Windows???!!!

Please, anybody tell me the steps to make to install the plugin for Apache2 on Windows platform.
The documentation found on the Bea site at.:
http://e-docs.bea.com/wls/docs61/adminguide/apache.html#115010
is rather ambigous.
If anybody knows how to do this, where to put the .so files, what to write in the httpd.conf ... etc, please reply me.
Thanks in advance,
Stefi.

I ran into the same situation. I contacted BEA support and confirmed that this
is the current situation: the current WebLogic 7.0 Apache 2.0 plug-in works on
Apache 2.0.39 but not Apache 2.0.40. This, evidently, is because of a change in
Apache's plug-in API. BEA is processing a change request to support Apache 2.0.40
but no date was given for when it would be available.
"Shao Ling" <[email protected]> wrote:
>
i have download the plugin from dev2dev,it works on apache2.0.39.but
it can't work
on the new apache2.0.40.it said:apache: module "mod_weblogic.c" is not
compatible
with this version of Apache.Please contact the vendor for the correct
version.
another question:do i have to get new version of the plugin if apache2
update
it's version again?will you please give us a version that not depend
on apache's
update?

Similar Messages

How to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?

how to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?
kindly recommend me any best one and tel me step by step how i will add more plugins n filters

A Plug_in normally come with an installer or install instructions. Check the documentation for the plug-in you trying to install. It sounds like you don't know what plug-ins you want to install. In that case you don't need to install any. At some point you may read about a plug-in and what it can do and feel you have a need for it. Then you will have a reason to install a plug-in that is not installed by default. There may also be a cost involved most worthwhile plug-ins are not free.
Adobe Optional Plug_ins downloads are Plugins Adobe want to remove from Photoshop and no longer install by default. Also at some point in time these will no longer install into the current Photoshop for Adobe will remove feature or interfaces the use. For example the CS5 optional plugins will install in Windows CS6 perpetual version 13.0.1.3 but not in Subscription version 13.1.2 or perpetual Mac version 13.0.6 fot its 64bit only and the Mac CS5 optional plug-in for Picture package is only a 32bit plug-in.
You will need to keep and maintain old versions of Photoshop if Adobe remove features you use in new versions of Photoshop.

How to Uninstall a Plugin in Safari for Windows?

Hi,
Im using Safari 4.0.3 on Windows XP and can view my installed plugins through Help>Installed Plug-ins, but how do I uninstall plug-ins?
I know that on the Mac they are stored in specific folders but I dont know how it works in Windows. How do I uninstall Safari plugins in Windows?
Thanks,
Dan1ell

I am also trying to do this. I am trying to remove the Flash plugin from Safari for Windows. Anybody know how to do this?
Or, is there a Flash blocker for the Windows version of Safari? That would work, too.

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

When I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run"

when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.

Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem.

Cannot install driver software for N8-00, Windows ...

I'm having a lot of trouble getting any Nokia software to work on my PC.
(This was the same for my previous Nokia 2730.)
The first time I connected my N8-00 to my PC, running Windows Vista 32, my PC worked out it was an N8-00 and a window appeared asking me to confirm AutoPlay settings - there was a checkbox (which I checked), but no OK button.
I could go to Start > Computer and see the N8-00 there though.
I opened the device and found the Ovi Suite Installer and tried to run that (because the downloaded version didn't work either - I'll start another thread about my troubles with Ovi Suite) but it didn't work.
I then removed the phone from my PC.
Now whenever I connect my phone to my PC Windows tries to install the N8-00 drivers and fails, giving me these messages:
"Found New Hardware - Nokia N8-00"
"Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
Nokia N8-00 USB Phone Parent
No such interface supported
If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Obviously not being able to connect my phone to my PC is very frustrating and restricts many of the features I wish to use.
Help in solving this issue would be very greatly appreciated.

Could someone of you resolve the problem about the connection of N8-00 to PC??
I have the same problem and I can't resolve it.
Best regards!!

Install optional driver updates from Windows Update for IdeaPad Yoga 13?

Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates:
Conexant - Audio Device - Conexant SmartAudio HD
10.01.2014
Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000
Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 2014
04.06.2014
Should I install those updates or should I keep the original drivers?
The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated:
Conexant Audio Driver for 64-bit Windows
8.65.3.53 10/22/2013
Integrated Graphics Driver for 64-bit Windows
Windows 8.1 (64-bit)
9.17.10.2843 10/23/2012
Intel Video Driver for 64-bit Windows
10.18.10.3282 10/22/2013

Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site.
So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to ex

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to extract Adobe Photoshop Elements 13. Please download all parts.: I've also gotten an Exit Code: 7 when trying to install. I've turned my McAfee virus system off while trying to install.

Hi,
Have you tried downloading Photoshop Elements 13 from here?
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
There is only one file to download - which one depends on your system (32-bit or 64-bit).
These are the trial versions but will convert to the full version when you supply your serial number.
Brian

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Download and instalation instruction of itune for windows 7 operating system

download and instalation instruction of itune for windows 7 operating system

This is a user to user technical support forum, you are not addressing Apple here.
Regardless, if you want/need help... provide the specific details and error messages that are occurring.
We are not mindreaders.

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Installing ArcSDE 9.2 for Oracle version 10G R2 on Windows 2003 x64

We submitted this question on an ESRI user forum, but we would also like to submit it elsewhere to ensure an answer.
We are trying to install ArcSDE 9.2 for Oracle. The version of Oracle is 10G R2 (10.2.0.1). The server is a Windows 2003 R2 Enterprise x64 edition with SP1. There are now 2 instances of Oracle on the server, but this problem originally occurred when there was only one instance. The issue: ArcSDE 9.2 apparently installs just fine. There are no error messages during the run of the installation process. However, when the Post-Installation process is called, a critical error alert pops up reporting, "The application failed to start because OCI.dll was not found. Reinstalling the application might fix this problem." ArcSDE has been uninstalled and reinstalled several times. Oracle has been uninstalled and reinstalled several times. Various searches have been made, concerning this error message. On Friday the only ESRI Article we could find mentioning this error was Article ID: 25388 which stated that the "ORA81/bin" directory needed to be added to the PATH environment variable. However, today we found a new ESRI forum entry dated 6/2/2007 with the querystring "c=2&f=1717&t=223961" in which someone reported the need to install the 32 bit Oracle_HOME. However the ESRI Support Center article he referenced, (dated November 14, 2006), stated that the 32 bit Oracle Client needed to be installed to a different Oracle_HOME and the service name created for it, is to be used in the Post-Installation process. And finally our Oracle DBA reported seeing another Support Center Article which stated that the 32 bit versions of the Oracle libraries are installed by default in a different location, and it was only necessary to add that location to the PATH environment variable. I have also seen information on Oracle forums stating that this message means that the Oracle client needed to be installed, but our Oracle DBA reports that this is installed by default with Oracle DB server. My question is of course which if any of these solutions is correct?
E.R. Joell MCSD MCDBA

I have managed an ORacle/ArcSDE environment for many years where multiple SIDs were running.
If it doesn't know which SID then it would indicate that it is picking up the wrong ORACLE_SID environment setting. To be honest, UNIX is an easier environment to operate software in as one can set environment variables to suit software very directly. Now I have not run ArcSDE on a Windows environment before so any suggestions I have may not work as I write them.
Still, I would suggest you consider writing a CMD/batch script that:
1. Set all appropriate Oracle environment variables DIRECTLY eg
SET ORACLE_BASE=c:\oracle\product
SET ORACLE_HOME=c:\oracle\product\10.2.01
SET ORACLE_SID=...
2. Set the ArcSDE environment
3. Sets the Path to include all Oracle, ArcSDE and required Windows executables
4. Start the ArcSDE service:
NET START ESRARCSDE (or whatever this thing is called)
I suspect if you can get this going you will never go back to any other method of starting and managing ArcSDE (this approach works and works well on UNIX so you will be all skilled up to migrate across to Linux/Solaris etc if you see fit).
Hope this helps.
PS I have run ArcSDE against non-supported versions quite successfully over the years so I would say try it against 10.2.0.1 and see what happens.
regards
Smon

How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

Sorry my bad english..
See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

Install plugin for Apache2 for Windows???!!!

Similar Messages

Maybe you are looking for