Install Portal into remote 9.2.0.3.1 database

Has any successfully installed portal into a remote 9.2.0.3.1 database? My O/S is Windows 2000. I've got IAS Rel 2 9.0.2.0.1 installed and patched up to 9.0.2.2 I've been working with MetaLink, but so far they haven't been able to solve the problem. The issue is that the DAD will not work. Everything appears to install correctly, but after creating the DAD and bouncing the http server, the DAD won't come up. Yes, I can connect with sqlplus, yes there are valid tns entries. I've even created a DAD to my existing portal30 install in my 8i database and that works. Its just this 9i install that refuses to work.
Does anyone have any ideas?

I turned on debugging in the DAD and this is the message:
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
Proxy log On failed.
Please verify that you have specified correct connectivity information i.e. username, password & connect-string in the DAD
Error-Code:12638
Error TimeStamp:Wed, 28 May 2003 12:31:15 GMT
The Apache error log has this in it:
[Wed May 28 07:54:49 2003] [error] mod_plsql: /pls/pallportal/pallportal.home HTTP-503 ORA-12638 <B>Proxy log On failed.</B><BR>Please verify that you have specified correct connectivity information i.e. username, password & connect-string in the DAD

Similar Messages

Installing Portal server on Solaris 10

hi,
I am installing portal server on a zone in Solaris 10 machine.Access Manager could be installed success fully . But now I am trying to install portal server. but it is showing installtion failed and configuratioin failed.
Are there any special steps to be followed fro installation of Portal server on a different zone.
The only product I have installed is the AM.
please advice
thanks in advance
dhawanmayur

Hi,
I ran into trouble because the installer "forgot" to install SUNWldapcsdk-tools, but later tried to use /opt/SUNWdsee/dsee6/bin/ldapsearch, which wasn't installed (and the error I got was just that installation and configuration failed).
You could either run the installer twice, first time just install the Directory Server, then manually install SUNWldapcsdk-tools (it is in Product/shared_components/Solaris_10/Packages directory), then run the installer again and install the other modules. Or you could get the Directory Server as a separate download, install that first (it is supposed to install everything you need, but I haven't tried it) and then run the installer for AM and the portal.
Cato

How to install Cocoon into Weblogi5.1

I try to install Cocoon into weblogic5.1 step by step according to Cocoon
install guide but it can't work . while I start weblogic it have followed
error:
Tue Dec 19 18:32:17 EST 2000:<E> <HTTP> Could not find Web application
'cocoonwar'
java.io.FileNotFoundException: Directory cocoonwar\ does not contain
WEB-INF/web.xml
at weblogic.servlet.internal.dd.DescriptorLoader.<init>
(DescriptorLoader.java:200)
at weblogic.t3.srvr.HttpServer.loadWARContext (HttpServer.java:648)
at weblogic.t3.srvr.HttpServer.initServletContexts (HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
Tue Dec 19 18:32:18 EST 2000:<E> <HTTP> Error creating servlet context for
Web application 'cocoonwar'
java.lang.NullPointerException
at weblogic.t3.srvr.HttpServer.initServletContexts (HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)

Hi,
9iFS must be installed in an 9i home type. So you must have it installed in a single box in your 9i DB home. You must use the Apache server of the DB, because the installer will modify the configuration files of this Apache, not this of 9iAS.
After just modify the port the 9i apache is listening (use 81 instead of 80 for example).
Be careful that if you install a new apache for the 9i database, your vw_gateway_cfg environment variable will be changed and will point to the 9i home instead of the 9ias home. So you have to change it back to your 9iAS home if you want to use the portal !!!!
Regards
Pierre

How to install 9ifs into 9idb with 9iAS 1.0.2.2.2a in window 2000?

Anyone know how to install 9ifs into 9idb with 9iAS 1.0.2.2.2a?

Hi,
9iFS must be installed in an 9i home type. So you must have it installed in a single box in your 9i DB home. You must use the Apache server of the DB, because the installer will modify the configuration files of this Apache, not this of 9iAS.
After just modify the port the 9i apache is listening (use 81 instead of 80 for example).
Be careful that if you install a new apache for the 9i database, your vw_gateway_cfg environment variable will be changed and will point to the 9i home instead of the 9ias home. So you have to change it back to your 9iAS home if you want to use the portal !!!!
Regards
Pierre

How to install Oracle10gr2 into the IBM AIX 5.3 Server

Hi ALL,
Could you please give me instructions how to install Oracle10gr2 into IBM AIX 5.3 Server. Otherwise if any installation doucment please provide
Thank you all
Kishore

Hi Kishore!
Apart from posting an AIX question in a Linux forum it is not completely clear what your problem is.
Have you read the http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb19075%2Ftoc.htm&remark=portal+%28Installation%29
Installation Guide?
What are the problems you encounter?
cu
Andreas

I am trying to use firefox as the web lauch for citrix ica but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?

I am trying to use firefox as the web lauch for citrix ica client but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?
When I installed firefox, it asked if I wanted to use safari settings and I said yes but I think this might be causing the problem. Safari is no longer compatible with citrix ica client. When I reinstalled firefox it automatically installs the safari info. Does anyone know how to re-install firfox without installing safari info?

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

Why is it that directory server and IAS will not install through a remote Terminal Services session??

Hi,
I think this can be done in Unix, using telnet, you may log into the
system and install it.
Regards
Raj
Mozkill Williams wrote:
why is it that directory server and IAS will not install through a
remote Terminal Services session??
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Building Flex Application with Flex Builder installed in a remote server

Building Flex Application with Flex Builder installed in a remote server and different developers accessing it via VNC etc
I have a requirement as below..........this is mainly to look for a solution where we can see a environment.............where we can stop developer to install flex builder locally, download/check out code locally and work locally ..............Please have a look ........
1. There is Remote Server hosting our source code say 1st Remote Server
2. There is another 2nd Remote Server which support workspace for each user
3. Flex Builder installed in the 2nd Remote Server
4. Each Developer connects to the 2nd Remote Server via VNC etc log in to their workspace
5. Each developer check out code in their workspace by connecting to 1st Remote Server.
6. Start Flex Builder instance which is running in the 2nd Remote Server
5. Each developer open source code modifies, build application in their workspace and check
Do anyone have any idea whether this kind of environment is possible in Flex or can anyone suggest something which is almost close to this ? I heard Cloud Computing is something that world is looking to represent this kind of solution .............not sure though

Hi
The concept of cloud computing is not even very clear to me
I think this is what I understood about it ...........from this link http://communication.howstuffworks.com/cloud-computing.htm
It says
"Instead of installing a suite of software for each computer, you'd only have to load one application. That application would allow workers to log into a Web-based service which hosts all the programs the user would need for his or her job. Remote machines owned by another company would run everything from e-mail to word processing to complex data analysis programs. It's called cloud computing, and it could change the entire computer industry"
"There's a good chance you've already used some form of cloud computing. If you have an e-mail account with a Web-based e-mail service like Hotmail, Yahoo! Mail or Gmail, then you've had some experience with cloud computing. Instead of running an e-mail program on your computer, you log in to a Web e-mail account remotely"
My issue is not with the license. The solution that I am looking for is
1. Don't want the developer to download the source code in any fashion either checked out or anything else in the local machine
2. Want the developer to work directly on the server
3. Looking for a solution where each developer is not required to install Flex Builder locally and the developer can use Flex Builder that is installed on the server and in his workspace and create/modify build on the server itself
Hope I could make you understand this time ................
Regards
Biswamit

Downloading BW report from Portal into Excel

Hi All,
When a user is trying to download a BW report from Portal into Excel, it is prompting for User id and password of backend.
But since portal has SSO this should not happen??
Once the Uid and Pwd has been entered the report works fine.
Why is this happening ??
Need Urgent Help regarding this issue...
Thanks in Advance.
Regards,
Shailesh Nagar

are you connect the portal with proxy?

How do I install memory into the Pavilion 17z-F2 series laptops?

How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
HP appears to have no maintenance guide available for this model series. What's up with that?
Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

How about this one:
Pavilion 17z Manual
Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine.
If this is "the Answer" please click "Accept as Solution" to help others find it.

How is the best way to send data from local database into remote database ?

Hi all,
I need to send data from local Oracle database into remote oracle database. Both sites connected via 128 kbps frame relay connection.
The sending need to be done once a week, can be done nightly.
How is the best way to do this ?
Thank you very much,
xtanto

How is the best way to do this ?How much are you planning to send?
You can use COPY command. Ensure that you have valid database link between two databases.
Available options are:
create - creates a new table. errors out if the destination table exists.
replace - drop the destination table and re-creates with data.
insert - inserts data if the destination table exists.
append– appends data into an existing table.
use set arraysize 5000 -The arraysize specifies the number of rows that SQL*Plus will retrieve from the database at one time.
copy from scott/tiger@ORCL to scott/tiger@ORCL92 create new_emp using select * from emp;

Can't get CS6 pkg to install through Casper Remote

I'm sure this has been talked about in here, but I read through several message boards and it looks like I'm not getting the answer to it, but people are mentioning it in various areas. Forgive me if this is a repeat question.
Can anyone get CS6 to install on to your user machines using Casper Remote? I'm at a 80/20 % install rate.
We're a Macintosh office with everyone one either 10.6 or 10.7. All meeting the spec and system requirements. I'm using JAMF Spftwar, LLC Casper Remote v 8.31.
Here is what happens with us.
You choose the computers to install.
Choose the package to install (CS6)
Casper Remote launches and starts to install.
Looks great. You can see the apps populate in the Application folder. One after another. Then when it gets to about 97% installed, it start to uninstall them one by one. Then closes out and states this...
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
Unmounting file server...
Submitting log to https://treasure.schawk.com:8443//...
Finished.
Any ideas? I have about 100 machines to install on within the next week.

Interesting that no one has responded. But now, here in September, I'm seeing the same problem with my CreativeCloud package created with CreativeCloudPackager.
Still no ideas anyone?

Hello, My computer crashed, I removed the hard drive and installed it into a hard drive enclosure and now I am trying to get my Thunderbird data off of it

Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
AN

lets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows.

How to recognize if application is installed using "Install Application on Remote Desktop" option on Windows Server 2008 R2

How to recognize if application is installed using "Install application on remote desktop..." option in Control Panel in Windows Server 2008 R2?
Basically, as administrator, I can't say if the user installed application using "Install application on remote desktop..." in Control Panel or he just installed it by clicking the .msi executable. I can't find anything that makes any difference.
I could not find anything in the registry. I am quite confused.
Thanks,
Aleksandar9

Hi,
Thank you for your posting in Windows Server Forum.
Please make sure that you are using category view of control panel-programs to check the application. And in addition to “install application on Remote Desktop server” user can also use command line also.
change user /install
change user /execute
change user /query
“The first time you run the application, it searches the home directory for its .ini files. If the .ini files are not found in the home directory, but are found in the system directory, Terminal Services copies the .ini files to the home directory, ensuring
that each user has a unique copy of the application .ini files. Each user should have a unique copy of the .ini files for an application. This prevents instances where different users might have incompatible application configurations.” (Quoted formthis
article).
Hope it helps!
Thanks,
Dharmesh

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)?
HP appears to have no maintenance guide available for this model. What's up with that?
I took a look at the Pavilion 17z-F100 (sent by mistake). It does not have any removable panels on the underside. And, the User Guide for the 17z-F200 indicates that it will be the same (assuming it ever arrives).
I am probably going to have to disassemble the entire outer-shell to install memory (or replace the hard disk drive, once the time comes). But, every laptop I have worked on in the past has had its own special place for hidden screws or special trick to disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

@DLBurkhart ,
Hello and thank you for posting on the HP support forums. Here is a link to the HP Pavilion 17 notebook Maintenance and service guide.
HP Pavilion 17 Notebook PC Maintenance and Service Guide
In the guide you will find the instructions on how to access the memory module and as well you should find the supported memory configurations.
I hope this was helpful.
Thank you for posting and have a great day
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Install Portal into remote 9.2.0.3.1 database

Similar Messages

Maybe you are looking for