Install printer driver for the hp 3511

I have a mac 0S X older than 10.6 version and i need help finding and installing a driver

Hi,
First click the Apple icon and select About This Mac, if you may have any previous OS version than 10.6.8 be sure to run Software Update first.
For USB connection be sure to plug the cable and turn the printer on.
Next download and install the software below, be sure to select HP Recommended while installing:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-106099-2&cc=us&dlc=en&lc=en...
Finally reboot your Mac and run Sftware Update to update the latest drivers.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How can I get a printer driver for the hp psc 2410 photosmart?

When I tried toadd the printer, there was a message saying that the printer driver for the 2400 series was available, but when I tried to download it, I received an error message saying that I couldn't download it because of a network error. My Macbook is not on a network at the moment. How can I get the driver so I can print?

You can also install this update directly (not through app store):
http://support.apple.com/kb/dl907
If you want us to help more, you will need to give us more detailed info. "It didn't work" leaves me wondering exactly what you've done so far.
For example, after clicking Add/+ and selecting the printer you want, have you waited for a full minute for the Mac to find the driver
- OR -
when it starts searching for driver, have you tried going to the pull-down menu where it says "Use: Auto-select," and choosing "Select Printer Software..." to make a manual selection?

Can't install printer driver for Epson Workforce 845 on Lion

I can't seem install the printer driver for the Epson Workforce 845 on my MacBookPro running OS 7.2.
I installed the software from Epson but the printer installer can't find it.

I just finished installing an Epson Workforce 545 on Lion. This info is valid as of early March 2012. The trick seems to be this: DON'T install using the CD that comes with the printer. DON'T download the driver from Epson.
First do an Apple Software Update to make sure the machine is up-to-date. Then simply open the Printer & Scan preferences and add the Epson printer. It will download the driver directly from Apple and you will be good to go. If you do install the bad drivers from Epson, you have to remove the /Library/Printers/EPSON folder and also anything EPSON in the Cache folder, then start over.

Where can I find a Mac printer driver for the HP LaserJet 1536

Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
I work on behalf of HP

What happened to the printer driver for the HP Laserjet 1020?

After installing HP Printer Driver Update v1.1.1 for Mac OS X 10.5.3 my HP Laserjet 1020 no longer works. When I sent a print command from any software it seemed to work properly, but nothing printed. The information in printer utility window indicated that the printer was ready and there were no items in the queue.
I removed the printer and attempted to reinstall with the updated driver. However, there is no driver for the 1020 in the driver selection menu, despite the fact that it is listed as one of the drivers included in the update.
Can anyone suggest where I can obtain the appropriate driver?

greg sahli: I followed your suggestion to reset the printing system and re-install the driver update. While there is indeed a Receipt for the 1022 Series pkg, the driver does not appear in the drop down menu. The drivers closest to the 1020 that appear are 1010, 1012, 1015, and 1100. None of these drivers work.
I did find an 80% solution at Macosxhints. I will make do with this until the new OS X system comes out. If it has the 1020 or 1022 driver that works with my printer I would probably buy it. However, if it does not and the fix from Macosxhints doesn't work with Snow Leopard I'll be hard pressed to justify an upgrade until my printer dies.
Anyone interested can find it at the following url, if it is still active (there are no spaces in the url):
http://forums.macosxhints.com/showthread.php?s=eb4fe0d44e9dcd41a8da863618e391ac& t=40933&page=10

HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

How do you install a driver for speakers I have connected to the headphone jack?

You don't need drivers for speakers in a headphone jack.
What is the problem?

I need a print driver for the HP Color LaserJet 3600 for OS X 10.8.3

Now that I have updated to the newest OS I'm frustrated because neither Hewlett Packard nor Apple has a driver for the printers that I have. So I can't print from my laptop to any of my printers. I just need a driver option for and HP Color LaserJet 3600, Canon MF5900 Series, and a Hewlett Packard CP1518.

Information/possible solution:
Printer Setup
https://discussions.apple.com/message/4367330#4367330
HPIJS for Mac OS X
Gimp - Print

Installing a driver for the Apple Keyboard in Boot camp windows

I recently installed Boot Camp, VMware and Vista on my Mac so that I could move all of my computing on to one computer (I use a few programs that aren't available for the iMac). In Windows I cannot use the number pad for input - I can only use the numbers just above the letters. This is a major inconvenience because I input numbers often. I have tried to search for the driver for the Apple Keyboard that is compatible with windows, but have been unsuccessful.
Anyone know of a fix for this?
Thanks!

I tried putting in the Leopard disk and running setup.exe and that went through the motions of installing all of the drivers, but after I restarted the windows machine it still doesn't recognize my keyboard. This may be a system wide issue, because when I work in Windows it also tells me that I do not have a camera installed for video chat. At first I thought this was just part of the price I had to pay to have a Mac and use windows on it, but now I'm thinking that my drivers were not installed properly because I know a camera is installed internally (obviously - its a less than one year old iMac all-in-one).
Can anyone think of something that I'm not doing? I have gone into the control panel in the Windows machine and tried to update my driver, but it keeps telling me that the driver is correct (it has windows driver for a standard ps/2 keyboard).

Install printer driver for a shared printer MP520

Hi,
I need to install the Canon MP520 (http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&mo delid=15483) printer to my MBP. The printer is connected to another a mac running OSX and is shared. I installed the OSX driver provided on the Canon page and I can see the shared printer in the network printers but when I am asked to choose the driver I can't see the correct model listed.
On the other hand, if I simply connect the same printer via USB, to my MBP it is recognized directly.
When I'm asked to provide the driver while adding the printer via the network, there is also the option to browse to the driver location. So my question is, where are the can I find the right driver on the OS ?
Thanks in advance ,
Tex

Reading your first post it sounds like the method you used to connect to the shared printer may have been incorrect.
When a Mac is sharing a printer, to add this printer on another Mac, you select the Default browser view. You should see the printer name followed by Shared in this view. When you select it, there should be no requirement to browse for a printer model. The queue should just be created with minimal driver options.
If you want to have all the features of the MP520 available to your Mac, then you need to install the same driver on your Mac as what is being used by the Mac sharing the printer. Check this carefully as Canon offers two drivers for Mac OS X and you can also use the free Gutenprint driver set for the MP520. If you open System Preferences > Print & Fax on the sharing Mac, select the printer in the list and look at the Kind section of the right hand pane, the driver version will be displayed. With a bit of luck the driver that was used to install on this Mac might still be available so that you can install it on your Mac.
Note also that you don't have to add the printer queue to your Mac to print to a shared Mac printer. From the majority of applications, when you select to print, you should find a Shared Printer option in the print dialog > Printer menu. This can be beneficial if you don't have a requirement to add this printer to your list, such as when you are visiting someone with Mac's. This doesn't sound like your situation but wanted to make you and others you read this aware of this fact.
PaHu

Can not install printer cartridges for the first time use

Trying to set up my F4500 all in one printer. Printer cartridge port will not center as shown in the diagram.

Maybe this will help.
It is a bit more detailed than a diagram.
Help:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=3944758&
"How To" Page --> Please select Cartridges:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01671728&tmp_task=useCategory&cc=us&dlc=en〈=en&...
Good Luck.
Kind Regards,
Dragon-Fur

Print Driver for HP 720C - for my eMac

I am trying to install my old HP 720C printer onto my eMac while I send my Epson back to be serviced. I can't find a Mac print driver for the printer and my attempts to download the linux solution have to this point been unsuccessful. My computer doesn't recognize that there is any new print drivers installed.

DGAAA wrote:
When I select the printer, the add button doesn't turn blue - it doesn't do anything when I click it.
Is the name of the printer appearing at the bottom of the list when you select Advanced? After you select the printer, what is filled in for the *Printer Name* and *Device URI*?
You might also want to try using the alternative communications software for USB printers called 'usbtb'. You can download it from http://buymelunch.org/printing/usbtb/ This software will often times work better with parallel to USB adapters than the standard Apple supplied software.
Matt

Need printer driver for Canon imageclass D320

Anyone direct me to a printer Driver for the Canon Imageless 320?
Canon support says none available.
Macbook pro under Yosemite.
thanks

Canon never made an OS X version of its proprietary driver "CARPS" that is used by the D320. And the Canon driver link provided above is just for Canon inkjets - there is no support for your model.
If you want to print to the D320 from the Mac, you would need to install a virtual machine application like VMware's Fusion and then load Windows 7 into the VM.

TS3276 I've been using Mac OS X 10.6.4. I want to install printer driver of Brother DCP -7030 .I tried it online I could not do it. Would you help me providing suggestions.

I've been using Mac OS X 10.6.4. I want to install printer driver of Brother DCP -7030 .I tried it online I could not do it. Would you help me providing suggestions. It would be great help.
Dinesh from Nepal

Mac OS X 10.6.8 is the current incarnation of Snow Leopard, and fixes various issues in earlier releases.
Current versions of Mac OS X 10.6 include the necessary printer driver for the Brother DCP-7030 printer (HT3669). (The asterisk footnote on that printer indicates there was a recent update via Software Update, so get to current 10.6.8 and ensure the Brother printer software update has been selected and loaded.)
If you're on the current Mac OS X version and if have the Brother update loaded (from Apple) and if problems with the printer persist, then remove the printer from your current Mac OS X configuraton, and re-add it, and see if that clears the particular issue(s) you're having with this printer.
From experience, the Brother software for Mac OS X is a little odd, and the older software stuff (and particularly around the scanner controls for their multi-function series) were, um, unusual, and a little unstable. Printing generally worked fine, though. Recent versions of the Brother software are working better including for the scaller, but the UIs and the set-up are both still odd. If you're using the box as a printer (I haven't looked at the DCP-7030 features), then you're best using the Brother software that arrives from Apple and not the software from Brother.
Also ensure the printer firmware is current. That's corrected some odd behavior on some Brother printers.

Windows 7 in OS printer driver for Deskjet 6840 not printing properly

The Windows 7 (32 bit) in OS print driver for the Deskjet 6840 produces print in "Normal" mode that is blurred (not properly registered left to right and slightly vertically). When printing in "Draft" mode it is apparent that the driver is not setting the left and right margins correctly, so that each line is alternately shifted left or right on the page. If I switch to a 500C driver, the printer works fine (but of course high res images do not print properly). This is occuring on two wired network computers, both running clean installs of Windows 7 professional with all current updates including Service Pack 1. Microsoft says, "It's a HP printer, it's their problem". I'm just looking for an answer. Anyone have experience with this?

Hello Bhl3302,
Thanks for posting at NI forums! I think you should follow RavensFan advice on contacting the vendor for information on the driver’s support, or if you have a readme file, you could check on that. Also, are the Windows XP and Windows sharing the same architecture (32 or 64 bits)? Maybe the driver is not compatible with one of them, in case it changed. I did a quick search on the error message you're getting, and I found this forum in which they give some steps you could follow regarding the INF file. For instance, in one of the comments, they say they had a similar issue with another device and they found some work arounds.
Best Regards,
Alina M

Print driver for hp laser 4650

I need the print driver for the hp laserjet 4650. The hp website displays on the universal print driver. Thanks

It seems that it is policy for HP (and other printer vendors) to only supply product-specific printer drivers for new models when those new models are introduced.
Thereafter (and especially when new operating system versions are subsequently introduced), the only HP drivers supplied for older printer models are the Universal Printer Drivers (UPDs), one each for the Page Description Languages (PDLs) PCL5, PCL6 and PostScript).
One or more relevant basic drivers may also be available as drivers built-in to the Operating System version you are using, as mentioned in this document:
HP LaserJet - Driver and software support for Windows 7

Install printer driver for the hp 3511

Similar Messages

Maybe you are looking for