Install Printer on Second Computer

A new 5530 was instaled on a desktop computer, with some difficulty but it works and commincates wirelessly. Computer knows it is there and has setup properties available.
I tried to set it up on a netbook that has no CD drive. I copied the CD fiels to a memory stick and carried it cross. Installation looks good but never completes.
I went through the troubleshooter numerous times, and tred to download to software. Each tiem it stops and asks if the downloaded installation file exists, and if I have access to it.
It is in the download file, and if I tell it to run, it runs and then asks if it exists and if I have access to it.
The troubleshooter wanted me to make numerous changes to my computer, which I did, none of which helped.
The netbook knows the printer is part of the network, but has no software to drive it.
How to escape from this? I have spent at least five hours working on this and got nowhere.

Gene67 wrote:
.. I tried to set it up on a netbook that has no CD drive. I copied the CD fiels to a memory stick and carried it cross. Installation looks good but never completes.
Hi,
That probably is the problem. Please download the following file, save on your laptop (remember where) then right click the download file and run as Administrator:
http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Color Laserjet CP1215 on XP home network will not print from second computer.

Win XP SP3 home network with two computers and one HP Color Laserjet CP1215 printer(USB) that is shared.   Computer one prints just fine, but second computer cannot print.
Print job goes to the queue and says "printing" and stays there for about two minutes and then says "error - printing" and then I have to delete the print job from the print queue.
Downloaded latest CP1215 print driver and installed it to second computer, added printer just fine. No errors until the print job enters the queue. Downloaded the CP1215 Diagnostic Utility, but it will not work on second computer. Have not tried it on first computer when job errors.
Message Edited by remleys_west on 06-23-2009 10:29 AM
Message Edited by remleys_west on 06-23-2009 10:35 AM

The Firewalls are disabled and from my laptop you can view all of the shared
Folders on the Desktop with the CP1215 attached via USB.
When I issue the print from my laptop that is on the same network, you see the
print file show up in the CP1215 print queue of the Desktop the CP1215
is USB attached to and then disappears about 15 seconds later. Here is
how it appears on in the Desktop CP1215 Print Queue before it disappears
Doc Name    Status    Owner Pages    Size    Submitted    Port
E-mail print Printing      Guest        1      547 KB     2:00pm 08/26/09      USB003
I've also download/installed the latest drivers. When I reinstall the CP1215 on my laptop from
the Desktop, the "PRINT TEST PAGE works from the Laptop but then all print commands after
that do not work.
I see from my Google search I'm not the only one having this problem
ANY IDEAS what to try next?
Wes

Install Lightroom on second computer?

How do I contact Adobe to get a second copy of Lightroom to install on a second computer? It says you can do this with one license, but they don't say how to contact Adobe to get the second copy. I tried using my serial number when the trial was over and it does not work.
thanks
SallyTurner

Hi,
I just bought LR2 through the online store. I have installed it on my desk top and my lap top. I used the same ser. # for both installs and had no problem at all. I also installed pse7 from disc on both machines with no problem. I dont have the reason why it is not working for you. you should be able to do what you want. The only thing I can think of is if you had one machine running the program while you were trying to install the other one the install may have been stopped because you can only use one machine at a time.
Good luck
Randy

Question: How do you install CC on second computer?

Question: Bought CC. Installed it on my computer at work. It works nicely. I was promised when I signed up that each license could be installed on a second computer. When I log in on my home office computer, all I can see is trial versions of individual programs — not CC (as promised). How should I proceed? Retro-compatibility with CS6 is *challenging*.

Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscriptions may not be in use at the same time

Installing Photoshop on second computer without original installation CD

I have been upgrading Photoshop on my desktop for years and have just ordered the CS5 upgrade. I now want to also install it on my laptop. Can I do this with the upgrade CD? I no longer have the original CD and I was using Windows 3.1 at the time anyway.
Thank you! Kathy Juron

Hi Kathy, you don't need a previous version installed on that second computer, but in order for the upgrade installation to work on new computer, you'll need the serial number of a prior version to enter at the time of the upgrade install...
It doesn't have to be the very original version you had, just a prior version (up to three versions back). Each time you upgrade, you get/have a new serial key.

Trouble installing Captivate on second computer

Captivate was installed on my second computer (have a work computer at office and second at telework site)
When I launch Captivate it pops upt box "sign in required", but it asks for a certificate.
If I hit 'yes' or 'view certificate' it goes in long wait mode, then tells me I'm not connected to internet.
So I never get opportunity to put in my username/password/license code

Screen shots
If I select Yes
Timer wheel spins for about a minute then
If I select View Certificate I get
My telework computer is a virtual clone of my office desktop.
I'm not an administrator for the machine. But the admin who installed it was also unable to put in the license info.
It's been several months since it was purchased and installed on my telework computer.
Hope this helps.

Use of hp Photosmart Premium Fax e-All-In-One C410 Series Printer On Second Computer

I have recently purchased new hp Pavilion dv5 laptop and photosmart C410 printer. Have loaded printer software onto computer and it works fine. Both of these are running in a wireless network. I would like to hook a second laptop that is running Vista to the new printer on a wireless basis also. The second laptop needs to print only, don't have to print photos, scan or copy.
Do I need to buy or download software to do this?
This question was solved.
View Solution.

Hello,
Just make sure the new compuuter is in the same network as your printer and install the Vista software either from the cd (if it says Vista on the disk) or download it HERE. And normally it should work fine.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Difficulty installing Photoshop on second computer?

I had contacted Adobe a while back regarding installing my Photoshop elements and Premiere elements purchase to a second computer. I have it on my pc and need to install on my laptop. I was told I could do it but there is no response when I hit download on 'my orders'. I'm stuck.

Can't download Adobe Store purchase
Troubleshoot Adobe Download Assistant
Mylenium

Installing photoshop on second computer

how do I install photoshop on a second computer. detailed info

snamedroc wrote:
On my first computer, which has mac OSX 10.6.8 operating system, I was able to install photoshopCC
On the second computer, which has the same operating system, I says the operating system is not supported by photoshop anymore.
Is there anything I can do to navigate this problem without upgrading my operating system?
When you say you were able to install on OS X 10.6.8 on your first computer, how long ago did you do that? The reason I ask is that Photoshop CC supports 10.6.8, but Photoshop CC 2014 (released this month) does not. That might be why the current version won't install. What you could do instead on your second machine is use the Previous Versions feature of the Creative Cloud app to install one of the older versions of Photoshop that does support 10.6.8, either Photoshop CS6 or Photoshop CC.
Also, regarding CC activation: You don't have to manually deactivate installations of software you installed with the Creative Cloud desktop application. As you install the software on more machines, it will let you use the two most recent installations you signed into, while automatically signing you out of all older installations.

Installing onto a second computer? Getting this error message: Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW006 ... -------------------------------------- Summary -------------------------------------- - 0 fa

Hi there,
I have just installed creative cloud on my mac laptop and am trying to download lightroom and photoshop (as a second computer) and am getting this error message
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.4.0.0 Adobe Photoshop Lightroom 5.pkg_5.4 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

See:
Exit Code: 6, Exit Code: 7 Installation Errors -
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

Printing from second computer?

Hi there,
I finally got my new Airport Extreme set up, and am able to access the Internet and print wirelessly from my primary computer.
I have a second computer on the network, and can surf the net, but I can't seem to print wirelessly from it, as I can with the primary computer.
Any suggestions?
evj

Wondering if you've had any luck with this problem, as I just set up my new AirPort Extreme this evening and am having the exact same challenge. Both computers connect fine to the internet. My newer iMac is able to print wirelessly, however my 2 1/2 year old eMac will not print. I keep getting a "communication error" message. I've checked all the settings and tried resetting the AirPort and the printer, which is about all that I know how to do. Both computers are running Leopard...
Any advice would be greatly appreciated.
Carina

Installing CC on second computer

I'm trying to install my CC apps on a second computer but it doesn't let me log in properly and won't show any programs in the 'apps' section of the Creative Cloud installer.
This all works fine on my primary computer. What am I missing?
Both computers are iMac's not that it should make any difference.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Why can't I install on a second computer?

Why can't I install Premier Elements 12 on a second computer without paying for it again. The computer I originally installed the program on died. When I open Premier 12 on the second computer a window pops up to either buy it or use it on a trail basis. I already paid for it once.

bowguy1
There could be several scenarios for your situation.
1. You purchased Premiere Elements 12 as a download to a Windows computer and you want to use those downloaded 12 installation files on a Mac computer.
2. You already have the same purchased serial number on more than 2 of your computers. If this is the case and you want to download to a 3rd computer, then you need to deactivate that same purchased serial number from one of the 2 computers.
a. you can deactivate the purchased serial number from the working computer
b. you will need Adobe via its Adobe Chat to deal with the purchased serial number trapped on the crashed computer.
Please review and determine which scenario applies to you. If none, please give more details.
We are not Adobe. Rather user to user forum.
ATR

Installing on a second computer

I am supposed to have a right to install Creative Cloud on a second computer, but I cannot find simple instructions for doing so. How do I do it?

HI Eda S ,
Sorry for the incovenience.
To install Adobe Creativ Cloud on your second machine, simply navigate over to Adobe.com>Login with your Adobe Id & Password and navigate to apps to initate the download procedure. Also, you would like to download the Creative Cloud desktop application using the following link .
Creative Cloud Help | Creative Cloud for desktop
Cheers,
Kartikay Sharma

Trying to install on a second computer takes me to "Billing Info"

When trying to download and install Lion on my second computer, I go to the MAS - Purchased - and Lion is there with all my other purchased apps. On this computer (without Lion) it says "Install" to the right of Lion. I click on Install and it then takes me to my Apple ID Billing Info page and apparently wants me to confirm my credit card (pre-filled except for the CV code). Is this going to charge me a second time...or is it truly just a confirmation of the credit card I used to purchase Lion initially?

John...the best instructions for this seem to be at http://tidbits.com/article/10253. You can vary things as necessary, but I've given up and just use native Gmail since for me it's simply the best. That, pluse Google Calendar and I'm happy. Everything else is Mac, but I need to have a 1000% perfect sync with our Android phones, so this just works for me.

Install Printer on Second Computer

Similar Messages

Maybe you are looking for