Install Problems with 8.1.7 and 9.2.01
I tried to install 8.1.7 and 9.2.0.1 on a notebook with Win2000 Pro SP4 German (512 MB RAM, 1500 MB swap-file) and I failed in both cases.
I downloaded both install kits from OTN, unpacked to disk etc. (9.2.0.1 consists of 3 Zips, I unpacked to 3 folders called Disk1, Disk2, Disk3).
I have J2RE 1.4.2-06 (the latest available from Sun) installed on this notebook.
- 8.1.7:
Installer starts but crashes when I clicked on "Install" !!!
Very disappointing ...
What to do now ???
- 9.2.0.1:
Clicking on setup.exe in Disk1 folder: nothing happens !!!
Very disappointing ...
Ok, opening folder autorun and clicking an autorun.exe: whow, oracle installer is starting!
I did a standard installation with "Personal Edition" and "Universal Database".
Everything seems to work well...
After about 1h and heavy disk access it looks like the installation process is hanging! Nothing happens anymore!
Last message is "Erstellen von Clone-DB (Creating Clone-DB)" with progress bar hanging at 93%.
I did this 3 times in the meantime, deinstalling evrything, cleaning the registry (because Oracle Installer seems not to be able to realy clean the registry! Very disappointing ...), but the problem is still remaining: every time installation is hanging at exactly this point (93%).
Overall very disappointing compared to a MS SQL-Server installation on the same notebook, which needs no more than 15 minutes and works on the first run!!!
What the hell is going on with that stupid oracle installer on windows ??? Is oracle not able to produce a working install kit for windows ???
Any help would be highly appriciated !!!
Hans
Hans,
It is a known problem on Windows 98, Windows and Windows 2000 if you are using Intel Pentium 4 processor with Sun JRE and Symantec JIT. I had the same problem with Windows 98. Oracle has a patch. Please see Note:131299.1 on metalink for details.
Similar Messages
-
I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?
So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu). -
?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.
Error 1402 | Error 1406 | Acrobat, Reader
-
IE11 Problem with Windows 8.1 and IIS 8.5
I have upgraded my computer from Windows 8 to Windows 8.1, 64bit and IIS 8.5 is installed on the upgraded machine. I am unable to view with IE11 the default page of the default website hosted on the local machine. The problem occurs with both
the desktop version of IE11 and the Windows 8 metro style version.
When Chrome is installed on the machine the page is visible but when using IE11 a "This page can't be displayed" message appears. The IIS Log Files reveal that it is receiving nothing from IE11. Other machines I have that have also been upgraded
to Windows 8.1 exhibit the same fault.
The strange thing is that when viewing pages on other networked machines exhibiting the same problem, you can see the pages on the remote machines but in all instances the local page cannot be viewed.
It appears that there is a problem with IE11. Uninstalling and reinstalling IE11 does not fix the problem.
Can anyone help me? Assitance with this problem would be most appreciated.Description
<dir>
</dir><dir></dir><dir></dir><dir>
Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
</dir>
Problem signature
<dir>
</dir><dir></dir><dir></dir><dir>
Problem Event Name: APPCRASH
Application Name: IEXPLORE.EXE
Application Version: 11.0.9600.16384
Application Timestamp: 52157231
Fault Module Name: MSHTML.dll
Fault Module Version: 11.0.9600.16432
Fault Module Timestamp: 52620354
Exception Code: c0000005
Exception Offset: 002964a7
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: ab90
Additional Information 2: ab9026eb5cad8b25f882a373e2d752b2
Additional Information 3: d486
Additional Information 4: d48664e52db6f0b0676e13c96e422192
</dir>
Extra information about the problem
<dir>
</dir><dir></dir><dir></dir><dir>
Bucket ID: 45b7b98d077be82c89ec9142c2213a5f (-374769956)
</dir> -
I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.
Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
I have a problem with the effect gallery and the saving libraries in Illustrator CS6
Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP. -
Problem with update Photoshop, Illustrator and Indesign CS6
Hi all. I have problem with update Photoshop, Illustrator and Indesign CS6 on OSx 10.8.4. Application are OK but update (bug fixies) not working. Update failed. (U44M1P7)
Hi El Gondo,
The following might explain and help solve the problem...
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
Thanks!
Ankit -
Any problems with Adobe CS5.5 and the Maverick system?
Has anyone had any problems with Adobe CS5.5 and the new Maverick OS? I don't want to install if there are issues. Thanks!
First thing I would suggest is to upgrade your server OS to a newer version if possible. Secondly try removing the apps out of the allowable apps list and instead change it so that you allow the apps that are within the specific application folder, ex: Applications/Adobe Photoshop CS5
I had similar problems with CS5 apps and by adding the apps by allowable folder instead it corrected my problem. Granted, if you have savvy users, there is the potential to open a can of worms here but it was the only way I could get it to work for "standard" non-admin user types. -
Weird install problem with OS X, please help!
I've been upgrading a friend powerbook firewire 400Mhz G3, we installed 1GB of memory and put in an 80GB HD. I partioned so that OSX can be on the first 8GB, put 9.1 on the second parition of 7GB, upgraded the firmware, and i think i have tried just about everything i could find here on the discussion board.
I have several versions of X including the first version, panther (retail), and tiger (borrowed, on DVD). tiger and the original version get as far as installing, then go into kernal panic (you must restart right now.....etc). 10.2 just gts to the apple screen then a white jagged bar pops up.
i'm at a loss. i really don't know what i try to make this better, any help is greatly appriciated!!!!
oh, and the memory seemed fine when her original 6GB drive was in there, which had tiger installed.
jjhw1,
I will just run by you some potential causes for your problem and hope that one hits the target.
- I will ask, out of curiosity, why you are making an 8GB partition for OSX? This limitation applies only to the older Wallstreet powerbook. There is no need to partition the HD unless you have a specific reason.
- Since the HD is new, and you still want to run Classic and also boot 9.x, make sure you install the MacOS 9 HD driver, an option in OSX's Disk Utility when erasing an HD, or go ahead and install OS 9.x first...this will automatically install the OS9 HD driver. If you install OSX first on a clean HD without installing the OS9 HD driver, MacOS 9 will run fine in Classic under 10.x but 9.x will no longer boot.
http://docs.info.apple.com/article.html?artnum=107285
- The Pismo has a history of failing DVD-ROM drives and usually the CD-side starts acting up first. If you have access to another Pismo or Lombard, swap drives and try the install. If you have access to a FireWire CD-RW, you can also boot OSX CDs using it.
- Reset the PRAM if you have not done so.
- You may have dirty or bad CDs; carefully clean or try others.
- You mentioned the 'book ran fine with 1GB of RAM and running Tiger on a 6GB HD, but probably the 1GB was installed after Tiger was on the HD. There is the remote possibility that the RAM is problematic when running the installers. A Wallstreet, for example, often has problems installing with 512MB, but if one 256MB module is removed, the install goes fine, then the RAM is reinstalled.
If this were my 'book, I would try this:
1. Disconnect all peripherals and reset the PRAM.
2. Boot to the 9.x CD > use Drive Setup to repartition the HD (if you wish) > install 9.x to make sure the HD, RAM, etc, are good-to-go.
3. Boot to your OSX CD and see how the install proceeds. If it fails, it may be a problem with the optical drive and/or CDs. Try the options I mentioned earlier.
4. If you wish, remove the top memory module and try the install again. If successful, reinstall the module.
5. If there is no workaround for the optical drive, you might try installing via FireWire Target Disk Mode. The 'target' will be the Pismo's HD on the desktop of the 'host' computer and you will boot the host computer to the OSX CD and select the Pismo's HD as the destination.
http://docs.info.apple.com/article.html?artnum=58583 -
I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again
Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library. -
I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.
Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541 -
Wireless printing problems with 10.5.4 and Epson printers
Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printerI have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.
-
I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?
- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store -
Problems with MSI K8N-Neo3 and Command Queing.
I had some problems with two computers, based on the MSI K8N-Neo3 mainboard - they wouldn't boot into Windows after installing the drivers for the graphiccards. Before the breakdown of the forum, some people suggested that I was using to small PSUs. In the meantime I've solved the problem, by disabling the Command Queing feature in the drivers. Seems there may be a problem with the MSI board, and Maxtor SATA drives with Command Queing.
Key system components for the two computers:
AMD Sempron 3000+
MSI K8N-Neo3
1 GB Kingston PC3200 DDR-SDRAM
MSI GeForce 6600GT or MSI GeForce 6600LE graphics
Maxtor 120 GB SATA disk (6L120M0)
Sony DVD-RW drive
Anyway, I wanna say thanks for the quick answers...Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not? -
I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.
Please authorize ADE 3 with same credentials that you used with older version of ADE
Maybe you are looking for
-
How do I change the default folder for saving contacts?
I have happily used Outlook for several years for POP accounts. My recent addition of an Exchange account has hijacked several default behaviors that I was used to. For one, contacts are now saved by default in the exchange related contact folder
-
Applying Streams for oracle 10g 10.2
Dear all, i'm new to streams however i wish to deploy it in our environment, i have one instance 10g 10.2 (source) small size 9.5 GB which i want to replicate using streams to another stand by instance (destination) of the same version, both running
-
When I first built www.tutsheaven.com, I used Dreamweaver and Flash buttons. Everything has worked fine until IE7 came out. Now, you need to double click on the buttons to navigate to the next page. Is there a fix for this problem, or do I need to ch
-
Has there been any announcement by Adobe on approximately when AIR will support mobile devices?
-
My keyboard failed to put accents spelling. Through the system can not recognize the keyboard. This keyboard has one year and has always worked well and suddenly became this way, what to do