Install Process for solaris 10 6/06

After installation, Solaris prompts me for a login and pass
What is the default admin pass??

I've seen this before. Sometimes the installation doesn't prompt for a root password, and you can't login as root. Just power-off the system and start in failsafe mode. Then mount the root partition(it asks you if you'd like to do that) and edit /[mountpoint]/etc/shadow and remove the encrypted passwd string:
root:R1yP.BOK1xTeU:6445::::::
becomes
root:::::::
Then reboot, choose command-line login and log in as root.
/A

Similar Messages

After installed language for solaris, how to use it in Netscape

After installed languages for solaris,
How can I see them in Netscape:
View/Character set/...
Do i need to modify some files?
Thanks
Joanna

Hi,
Not certain what your external system is, but it may be worthwhile to go through the QM-IDI documentation to see if that meets your requirements
http://help.sap.com/saphelp_erp60_sp/helpdata/en/26/b43927506511d182c20000e829fbfe/frameset.htm
Alternately, take a look at BAPI_INSPOPER_GETDETAIL to determine how the lot expects to receive results, and BAPI_INSPOPER_RECORDRESULTS to set the results accordingly
Regards,
JL

Installing isqlplus for Solaris 8/Oracle 9i

Does anyone know how I can install isqlplus for Solaris 8? It does not seem to be installed with the Oracle 9.0.1 Enterprise Ediition full installation.
Thanks.

Did you resolve this issue?

Install error for Solaris 8 intel

When my Solaris 8 install gets to the spot where it asks for the language to use (0-9, english is 0, which I want), anything I hit on my keyboard sends bogus VT codes to the screen. Earlier in the install process (when it asks for solaris interactive vs custom for example), my keyboard works fine, I can choose 1 or 2 there.
Has anyone else seen the problem? I've tried multiple keyboards, and they all do the same thing.

Sounds like the dell keyboard problem:
http://groups.yahoo.com/group/solarisonintel/message/20087
The workaround is to attach an USB keyboard.

How to upgrade/install firefox for Solaris 10 on Sparc 64?

I just installed Solaris 10 on a SunBlade 100, as soon as I completed the install and I opened Firefox. The system asked me to upgrade to the latest version of Firefox, I downloaded the file to the Desktop, then expanded the file into "/usr/lib/firefox/" overriding the older firefox that was there. Then I created a symbolic link to "/usr/bin/".
Now, Firefox doesn't work at all, no matter what I do, if I click the icon on the Desktop, or click the Firefox icon on the Launch menu, or if I issue commands from the terminal like "./firefox" nothing works.
Any ideas?
Any and all help will be really appreciated.

Hi guys, I also had this situation and since I was not able to convert the package to a datastream, I downloaded it from http: //www. sunfreeware. com/mozilla .html
They also provide some readme files that can be of help.
Once you have the datastream package you can install using pkgadd utility.

Are there any rough processes for Solaris administrator to setup Sun LDAP as nameing server at Sun sparc host? like: 1st: modify /etc/nfsswitch.nfs 2nd: add LDAP server in /etc/hosts. 3rd: ......

Besides, can we install the LDAP server in sparc hosts as nameing system? Can we use Sun LDAP server or iPlanet Directory Server? or need BIND DNS server too?

There is a nice book from Michael Haines and Tom Bialaski: "Solaris and LDAP Naming Services" which contains all you need to configure Directory Server, LDAP, Naming Switch...
Ludovic.

Everytime i start the install process for creative cloud, it starts, looks as if its downloading, then disappears? I recently had to restore my computer to a few days before I had photoshop on my computer, so now i'm trying to re-install it. PLEASE HELP

See above,,, please help

arg, this is so frustrating, as I'm considering BUYING or subscribing to photoshop, yet I cannot get it to work!
I'm having trouble with the instructions, as I cannot locate the file they are asking me to locate:
Rename the opm.db file.
Close the Creative Cloud application if it's running.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
Rename the opm.db file to opm_old.db
Launch Creative Cloud
I am using WIndows 8, and getting extremely frustrated. I have already 1) removed all adobe stuff with the cleaner. 2) renamed my user account on my desktop (which was in your requested forums), 3) rebooted and reinstalled creative cloud, and it's still blank...
Can someone help me DEEPER as I'm a potential customer for life?
Thanks in advance...
John

OEPE Install for Solaris Sparc 64 bit

Hello Experts,
OEPE (Oracle Enterprise Plug-in for Eclipse) issue....
We have installed the below @ Sun Solaris 10, Sparc 64 Bit.
Web Logic 10.3.6
SOA 11.1.1.6.0
AIA 11.1.1.6.0
trying to install OSB (Oracle Service Bus) and it asks about the OEPE Install location and gave an error.
INST-07246 -- Enter a Valid value for OEPE Home location..
We have NOT installed OEPE, because it is NOT available for the version and the platform we have.
The OTN doc says as below:
Oracle WebLogic Server 11gR1 (10.3.6) + Coherence - Package Installer Size: .99 GB, Check Sum: 3179053739
This download provides a WebLogic Server generic installer. This installer does not include a JVM/JDK or Oracle Enterprise Plug-in for Eclipse, these must be installed separately.
Question(s):
1) Where can I get the OEPE for Solaris 64 bit and SOA 11.1.1.6.0?
2) Any other workaround for the OSB install issue??
Thanks a lot
Rgds
Natrajan

Hi Natrajan,
I don't think there is a Oracle packaged OEPE for Solaris 64... There is a Linux 64 though, but I don't think that is what you looking for...
Here you can see the available packages
http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
What you can do is to install Eclipse for Solaris... and then go to the link above and download a package "OEPE Plugins Only" and apply the plugins to your Eclipse
http://archive.eclipse.org/eclipse/downloads/drops/R-3.6-201006080911/solPlatform.php
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Install R2 on Solaris 10 local Zone

Need to have this set up in 2 - 3 months, I will be appriciate if someone can give me some tips and/or links for the do's and don'ts for this process.
Thank you in advance.
Sun.

All the info you need should be in the Install Guide for Solaris.

Also I need ndiswrapper support for solaris 10

I have a linksys -G type router and my computer uses a Linksys Wireless-G PCI Adapter with SpeedBooster
which works in Linux like mandrake , debian systems like knoppix and kanotix but their are some buggy like debian also that don't let me change the essid in debian but most linux works with the drivers for my card which are
04/13/2004 10:01 AM 7,870 BCM43XX.CAT
03/31/2004 08:44 AM 11,960 BCMWL5.INF
02/19/2004 11:51 AM 300,928 BCMWL5.SYS
normally you install the drivers with ndiswrapper -i BCMWL5.INF then use -m to add it too the model loader program in linux which adds wlan0 to ifconfig and iwconfig programs
which also ndiswrapper requires the source code of the kernel to install the ndiswrapper right , it req. it too compile the drivers, and using the linux gui programs to setup essid and key wep info
also I use a script in kanotix to use /etc/network/interfaces to load the info on bootup etc.. to get my wireless network card up in linux.
also how the support for soundblaster sound cards in solaris 10, I have not fingured out if theirs sound yet. freebsd 5.4 seemed to be missing the sound support
one more thing in bootup of the install program for Solaris 10 my geforce 6800 card detected right but my tv output was all wrong in since the picture , was only on the monitor and tv had stange graphics on it which did not look right I hope nvidia drivers fix this problem , Is their any different command needed for clone mode in Solaris 10 then free86 nd xorg scripts use?

I got the solutiion from Canon Customer Serivce, temporary until the 10.10 download is released. It works:
"You can download the latest software updates at this address:
http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_...
Please select "OS X Mavericks v10.9" using the drop-down menu on the page. You have to pick the previous version of Mac OS, because the options for OS X 10.10 Yosemite have not yet been populated. I sincerely apologize for any confusion this may cause. After selecting OS X 10.9, please click on the red triangle next to the word "Software" to see the software updates available for your computer. I would recommend updating all of your software including EOS Utility and Digital Photo Professional."
I never did find the drop-down menu, but I went into the site map and found what I needed.
Barry

Sun Cluster 3.1 64 bit support for Solaris 10

Hi:
I have some questions when migrate SC 3.1 from solaris 9 to solaris 10.
1) Does Clutster 3.1 for solaris 10 support 64 bit?
I have develop own resource type which is compiled with 64 bit mode, while cluster admin program is 32 bit based. E.g. /usr/cluster/bin/scrgadm
Will that cause any problem? For instance: 32 bit lib and 64 bit lib have the same name libscha.so will be loaded by 32 bit scrgadm and 64 bit my own developped resource type program.
2) Can I download a Cluster 3.1 install-pkg for solaris 10, 64 bit supported., which means all admin files like scrgadm are 64 bit based.
Or only ONE Cluster 3.1 version for solaris 10 is deliveried by SUN?
Thanks in advance!
BRs
//rdctahu

Hi,
Comments on your 2 questions:
1) Yes. IIRC, SC31 for S10 actually supports ONLY 64 bit. To be clear, this means
Solaris has to be booted in 64 bit mode, but 32 bit applications would run just
fine.
As for your RT being 64 bit, and scrgadm being 32 bit, no problem.
2) See (1). You are good.
Go for it.
HTH,
-ashu

RAMDISK for Solaris 8

I want to install ramdisk for Solaris 8. Is it possible ? I don't know how to do that. How can explain how to do that ?

Dear All,
I try to set up a ramdisk on Solaris 8 by the command:
# mount -F tmpfs -o size=1800m swap /mypath/ramdisk
(1). use "mkfile" to test the performance:
1-1. in the original file system (vx)
# mkfile 1500m 1500m ==> it needs about 20 sec.
1-2. in "/ramdisk"
# mkfile 1500m 1500m ==> it needs about 10 sec.
(2). after copying my data, the free space is:
# df -k
Filesystem kbytes used avail capacity Mounted on
swap 1843200 1115712 727488 61% /mypath/ramdisk
(3). when my applicatiion is running, I check the log:
( it needs to import a big file (41MB) )
3-1. before using ramdisk, importing the file needs 16 sec.
3-2. after using ramdisk, importing the file needs 15 sec.
* I use "vmstat -p 2" to check epi/epo, api/apo are very low.
My question is:
since the test result of step (1) shows the performance of ramdisk is better than vx,
why the result of step (3) is almost the same?
Can somebody explain this situation or give me suggestion, thanks.

Is there any version of Oracle BPEL Process Manager 10.1.2.0.2 for Solaris

Hi
Thank you for reading my post
Is there any version of Oracle BPEL Process Manager 10.1.2.0.2 for Solaris X86 available or under development?
Does any one tried the sparc version on x86?
Thanks

I looked there and it say there is only SPARC architecture available.
I want to ask whether any one tried to install the sparc version on X86 or not as it is java and should run everywhere.
Thanks.

Step by step process for taking oracle back up on solaris

Hi
Can you please explain me step by step process for taking oracle back up on solaris.
as well as i don't know about RMAN . what is this how to install this. whenever i am typing the rman in solaris $ rman
rman not found is comming please help me in this
Message was edited by:
user640349

First of all, what's your Oracle Version?
RMAN has changed a lot since if first appeared in Oracle 8.0. Now, if you don't have any knowledge at all of recovery manager you must first take a look at the recovery manager version corresponding to your particular oracle version so you get acquainted to the concepts.
If you see the error 'rman not found ...' then it means you don't even have set the environment variables for your session, which is part of the install process. The PATH environment variable must include the $ORACLE_HOME/bin where the rman along many other oracle binaries are located.
1. Check the environment variables.
2. Specify the Oracle version
3. You can use Enterprise Manager to easy your life, but the setup procedure is subject to the oracle version you are referring to.
4. Take a look at the backup/recovery manual to get acquainted with rman concepts.
~ Madrid
http://hrivera99.blogspot.com/

Install Errors for 9i on Solaris 9

I am installing Oracle 9i Solaris 9 and the install went well until the Oracle Database Configuration Assistant. It failed with the following errors:
Oracle Database Configuration Assistant Errors for install
ORA-27303
ORA-27146
ORA-27300
ORA-27301
ORA-27302
Can someone enlighten me as to what these mean?
Message was edited by:
d072330

For all of those newbies like me I forgot to set some system settings. Here are the system settings I needed to put into /etc/system:
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=3000
set semsys:seminfo_semmsl= 256
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=200
set shmsys:shminfo_shmseg=20

Install Process for solaris 10 6/06

Similar Messages

Maybe you are looking for